Skip to contentSkip to conversation

mpc5200: Add a4m2k board port

PATCH Superseded Stefan Roese 1 participant 2 messages Dec 6, 2012 – Dec 14, 2012

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mpc5200: Add a4m2k board port

This patch adds the a4m2k MPC5200B board port. Its a derivate of the a3m071 board with only minor changes.

Additionally this patch includes some clean-up changes:
- Remove I2C support from a3m071 as its unused
- Fix/enhance default env variables
- Fix some comments
- Add newly introduced CONFIG_SPL_TARGET to automatically build "u-boot-img.bin"

---
 MAINTAINERS                |   1 +
 board/a3m071/a3m071.c      |  91 +++++++++++++++++++++++++++++++++---
 board/a3m071/is46r16320d.h |  35 ++++++++++++++
 boards.cfg                 |   1 +
 include/configs/a3m071.h   | 112 ++++++++++++++++++++++++++-------------------
 5 files changed, 186 insertions(+), 54 deletions(-)
 create mode 100644 board/a3m071/is46r16320d.h
MAINTAINERS +1 -0
index 428b006..e48288f 100644
@@ -389,6 +389,7 @@ Ricardo Ribalda <[email protected]>
 Stefan Roese <[email protected]>
 
 	a3m071		MPC5200
+	a4m2k		MPC5200
 
 	P3M7448		MPC7448
 
board/a3m071/a3m071.c +84 -7

160 lines not on this page · raw message

board/a3m071/is46r16320d.h new file +35 -0
new file mode 100644
index 0000000..8183d81
@@ -0,0 +1,35 @@
+/*
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas at motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define SDRAM_DDR		/* is DDR */
+
+#if defined(CONFIG_MPC5200)
+/* Settings for XLB = 132 MHz */
+/* see is46r16320d datasheet and MPC5200UM chap. 8.6.1. */
+
+/* SDRAM Config Standard timing */
+#define SDRAM_MODE	0x008d0000
+#define SDRAM_EMODE	0x40010000
+#define SDRAM_CONTROL	0x70430f00
+#define SDRAM_CONFIG1	0x33622930
+#define SDRAM_CONFIG2	0x46670000
+#define SDRAM_TAPDELAY	0x10000000
+
+#else
+#error CONFIG_MPC5200 not defined
+#endif
boards.cfg +1 -0
index 70a1569..56da76e 100644
@@ -475,6 +475,7 @@ cmi_mpc5xx                   powerpc     mpc5xx      cmi
 PATI                         powerpc     mpc5xx      pati                mpl
 a3m071                       powerpc     mpc5xxx     a3m071
 a4m072                       powerpc     mpc5xxx     a4m072
+a4m2k                        powerpc     mpc5xxx     a3m071              -              -           a3m071:A4M2K
 BC3450                       powerpc     mpc5xxx     bc3450
 canmb                        powerpc     mpc5xxx
 cm5200                       powerpc     mpc5xxx
include/configs/a3m071.h +65 -47

220 lines not on this page · raw message

Signature · 1 line
1.8.0.1
#1 lore raw

PATCH v2 1/1 mpc5200: Add a4m2k board port

This patch adds the a4m2k MPC5200B board port. Its a derivate of the a3m071 board with only minor changes.

Additionally this patch includes some clean-up changes:
- Remove I2C support from a3m071 as its unused
- Fix/enhance default env variables
- Fix some comments
- Add newly introduced CONFIG_SPL_TARGET to automatically build "u-boot-img.bin"

---
v2:
- Enable CAN1 on I2C in GPS Port Configuration for a4m2k

 MAINTAINERS                |   1 +
 board/a3m071/a3m071.c      |  91 +++++++++++++++++++++++++++++++++---
 board/a3m071/is46r16320d.h |  35 ++++++++++++++
 boards.cfg                 |   1 +
 include/configs/a3m071.h   | 112 ++++++++++++++++++++++++++-------------------
 5 files changed, 186 insertions(+), 54 deletions(-)
 create mode 100644 board/a3m071/is46r16320d.h
MAINTAINERS +1 -0
index 428b006..e48288f 100644
@@ -389,6 +389,7 @@ Ricardo Ribalda <[email protected]>
 Stefan Roese <[email protected]>
 
 	a3m071		MPC5200
+	a4m2k		MPC5200
 
 	P3M7448		MPC7448
 
board/a3m071/a3m071.c +84 -7

160 lines not on this page · raw message

board/a3m071/is46r16320d.h new file +35 -0
new file mode 100644
index 0000000..8183d81
@@ -0,0 +1,35 @@
+/*
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas at motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define SDRAM_DDR		/* is DDR */
+
+#if defined(CONFIG_MPC5200)
+/* Settings for XLB = 132 MHz */
+/* see is46r16320d datasheet and MPC5200UM chap. 8.6.1. */
+
+/* SDRAM Config Standard timing */
+#define SDRAM_MODE	0x008d0000
+#define SDRAM_EMODE	0x40010000
+#define SDRAM_CONTROL	0x70430f00
+#define SDRAM_CONFIG1	0x33622930
+#define SDRAM_CONFIG2	0x46670000
+#define SDRAM_TAPDELAY	0x10000000
+
+#else
+#error CONFIG_MPC5200 not defined
+#endif
boards.cfg +1 -0
index 70a1569..56da76e 100644
@@ -475,6 +475,7 @@ cmi_mpc5xx                   powerpc     mpc5xx      cmi
 PATI                         powerpc     mpc5xx      pati                mpl
 a3m071                       powerpc     mpc5xxx     a3m071
 a4m072                       powerpc     mpc5xxx     a4m072
+a4m2k                        powerpc     mpc5xxx     a3m071              -              -           a3m071:A4M2K
 BC3450                       powerpc     mpc5xxx     bc3450
 canmb                        powerpc     mpc5xxx
 cm5200                       powerpc     mpc5xxx
include/configs/a3m071.h +65 -47

220 lines not on this page · raw message

Signature · 1 line
1.8.0.2