Skip to contentSkip to conversation

mpc5200: Add a4m2k board port

PATCH New Stefan Roese 2 participants 2 messages Feb 7, 2013 – Mar 9, 2013

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 mpc5200: Add a4m2k board port

This patch adds the a4m2k MPC5200B board port. Its a derivate of the a3m071 board with only minor changes.

Additionally this patch includes some clean-up changes:
- Remove I2C support from a3m071 as its unused
- Fix/enhance default env variables
- Fix some comments
- Add newly introduced CONFIG_SPL_TARGET to automatically build "u-boot-img.bin"
- Fix dtb patching in READ desciption for SPL Linux booting:
"fdt chosen" needs to get called to patch/create the chosen node.
- Add missing call to spl_board_init():
Define CONFIG_SPL_BOARD_INIT so that spl_board_init() will get called in the SPL version.

---
v3:
- Fix dtb patching in READ desciption for SPL Linux booting
- Add missing call to spl_board_init()

v2:
- Enable CAN1 on I2C in GPS Port Configuration for a4m2k

 MAINTAINERS                |   1 +
 board/a3m071/README        |   2 +-
 board/a3m071/a3m071.c      |  91 +++++++++++++++++++++++++++++++++---
 board/a3m071/is46r16320d.h |  35 ++++++++++++++
 boards.cfg                 |   1 +
 include/configs/a3m071.h   | 113 ++++++++++++++++++++++++++-------------------
 6 files changed, 188 insertions(+), 55 deletions(-)
 create mode 100644 board/a3m071/is46r16320d.h
MAINTAINERS +1 -0
index 9b696cd..95bfcec 100644
@@ -394,6 +394,7 @@ Ricardo Ribalda <[email protected]>
 Stefan Roese <[email protected]>
 
 	a3m071		MPC5200
+	a4m2k		MPC5200
 
 	P3M7448		MPC7448
 
board/a3m071/README +1 -1
index 7698614..a0fe832 100644
@@ -62,7 +62,7 @@ the following command:
 
 All this can be integrated into an environment command:
 => setenv upd_fdt 'tftp 1800000 a3m071/a3m071.dtb;run mtdargs addip2 addtty; \
-	fdt addr 1800000;fdt boardsetup;erase fc060000 fc07ffff; \
+	fdt addr 1800000;fdt boardsetup;fdt chosen;erase fc060000 fc07ffff; \
 	cp.b 1800000 fc060000 10000'
 => saveenv
 
board/a3m071/a3m071.c +84 -7

160 lines not on this page · raw message

board/a3m071/is46r16320d.h new file +35 -0
new file mode 100644
index 0000000..8183d81
@@ -0,0 +1,35 @@
+/*
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas at motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define SDRAM_DDR		/* is DDR */
+
+#if defined(CONFIG_MPC5200)
+/* Settings for XLB = 132 MHz */
+/* see is46r16320d datasheet and MPC5200UM chap. 8.6.1. */
+
+/* SDRAM Config Standard timing */
+#define SDRAM_MODE	0x008d0000
+#define SDRAM_EMODE	0x40010000
+#define SDRAM_CONTROL	0x70430f00
+#define SDRAM_CONFIG1	0x33622930
+#define SDRAM_CONFIG2	0x46670000
+#define SDRAM_TAPDELAY	0x10000000
+
+#else
+#error CONFIG_MPC5200 not defined
+#endif
boards.cfg +1 -0
index 32206d9..fc09934 100644
@@ -477,6 +477,7 @@ cmi_mpc5xx                   powerpc     mpc5xx      cmi
 PATI                         powerpc     mpc5xx      pati                mpl
 a3m071                       powerpc     mpc5xxx     a3m071
 a4m072                       powerpc     mpc5xxx     a4m072
+a4m2k                        powerpc     mpc5xxx     a3m071              -              -           a3m071:A4M2K
 BC3450                       powerpc     mpc5xxx     bc3450
 canmb                        powerpc     mpc5xxx
 cm5200                       powerpc     mpc5xxx
include/configs/a3m071.h +66 -47

227 lines not on this page · raw message

Signature · 1 line
1.8.1.2
#1 lore raw

PATCH v3 1/1 mpc5200: Add a4m2k board port

Dear Stefan Roese,

Quoted 24 lines · In message <[email protected]> you wrote:

This patch adds the a4m2k MPC5200B board port. Its a derivate of the a3m071 board with only minor changes.

Additionally this patch includes some clean-up changes:
- Remove I2C support from a3m071 as its unused
- Fix/enhance default env variables
- Fix some comments
- Add newly introduced CONFIG_SPL_TARGET to automatically build "u-boot-img.bin"
- Fix dtb patching in READ desciption for SPL Linux booting:
"fdt chosen" needs to get called to patch/create the chosen node.
- Add missing call to spl_board_init():
Define CONFIG_SPL_BOARD_INIT so that spl_board_init() will get called in the SPL version.

---
v3:
- Fix dtb patching in READ desciption for SPL Linux booting
- Add missing call to spl_board_init()

v2:
- Enable CAN1 on I2C in GPS Port Configuration for a4m2k

Quoted 8 lines
 MAINTAINERS                |   1 +
 board/a3m071/README        |   2 +-
 board/a3m071/a3m071.c      |  91 +++++++++++++++++++++++++++++++++---
 board/a3m071/is46r16320d.h |  35 ++++++++++++++
 boards.cfg                 |   1 +
 include/configs/a3m071.h   | 113 ++++++++++++++++++++++++++-------------------
 6 files changed, 188 insertions(+), 55 deletions(-)
 create mode 100644 board/a3m071/is46r16320d.h

Applied to u-boot-mpc5xxx repo, thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Commitment, n.:      Commitment can be illustrated by a breakfast
of ham and eggs. The chicken was involved, the pig was committed.