Skip to contentSkip to conversation

powerpc/book3e: make kgdb to work well

PATCH Superseded Tiejun Chen 1 participant 7 messages Jan 21, 2013

Subsystems (3)

v2 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v2 cover powerpc/book3e: make kgdb to work well

This patchset is used to support kgdb/gdb on book3e.

v2:

* Make sure we cover CONFIG_PPC_BOOK3E_64 safely
* Use LOAD_REG_IMMEDIATE() to load properly
the value of the constant expression in load debug exception stack
* Copy thread infor form the kernel stack coming from usr
* Rebase latest powerpc git tree

v1:
* Copy thread info only when we are from !user mode since we'll get kernel stack coming from usr directly.
* remove save/restore EX_R14/EX_R15 since DBG_EXCEPTION_PROLOG already covered this.
* use CURRENT_THREAD_INFO() conveniently to get thread.
* fix some typos
* add a patch to make sure gdb can generate a single step properly to invoke a kgdb state.
* add a patch to if we need to replay an interrupt, we shouldn't restore that previous backup thread info to make sure we can replay an interrupt lately with a proper thread info.
* rebase latest powerpc git tree

v0:
This patchset is used to support kgdb for book3e.

Tiejun Chen (6):
powerpc/book3e: load critical/machine/debug exception stack powerpc/book3e: store critical/machine/debug exception thread info book3e/kgdb: update thread's dbcr0
book3e/kgdb: Fix a single stgep case of lazy IRQ powerpc/book3e: support kgdb for kernel space kgdb/kgdbts: support ppc64

 arch/powerpc/kernel/exceptions-64e.S |   60 +++++++++++++++++++++++++++++++---
 arch/powerpc/kernel/irq.c            |   10 ++++++
 arch/powerpc/kernel/kgdb.c           |   16 ++++++---
 drivers/misc/kgdbts.c                |    2 ++
 4 files changed, 80 insertions(+), 8 deletions(-)

Tiejun

#1 lore raw

PATCH v2 1/6 powerpc/book3e: load critical/machine/debug exception stack

We always alloc critical/machine/debug check exceptions. This is different from the normal exception. So we should load these exception stack properly like we did for booke.

---
 arch/powerpc/kernel/exceptions-64e.S |   40 +++++++++++++++++++++++++++++++---
 1 file changed, 37 insertions(+), 3 deletions(-)
arch/powerpc/kernel/exceptions-64e.S +37 -3
index ae54553..767f856 100644
@@ -36,6 +36,28 @@
  */
 #define	SPECIAL_EXC_FRAME_SIZE	INT_FRAME_SIZE
 
+/* only on book3e */
+#define DBG_STACK_BASE		dbgirq_ctx
+#define MC_STACK_BASE		mcheckirq_ctx
+#define CRIT_STACK_BASE		critirq_ctx
+
+#ifdef CONFIG_SMP
+#define BOOK3E_LOAD_EXC_LEVEL_STACK(level)		\
+	mfspr	r14,SPRN_PIR;				\
+	slwi	r14,r14,3;				\
+	LOAD_REG_IMMEDIATE(r10, level##_STACK_BASE);	\
+	add	r10,r10,r14;				\
+	ld	r10,0(r10);				\
+	addi	r10,r10,THREAD_SIZE;			\
+	std	r10,PACA_##level##_STACK(r13);
+#else
+#define BOOK3E_LOAD_EXC_LEVEL_STACK(level)		\
+	LOAD_REG_IMMEDIATE(r10, level##_STACK_BASE);	\
+	ld	r10,0(r10);				\
+	addi	r10,r10,THREAD_SIZE;			\
+	std	r10,PACA_##level##_STACK(r13);
+#endif
+
 /* Exception prolog code for all exceptions */
 #define EXCEPTION_PROLOG(n, intnum, type, addition)	    		    \
 	mtspr	SPRN_SPRG_##type##_SCRATCH,r13;	/* get spare registers */   \
@@ -68,20 +90,32 @@
 #define SPRN_GDBELL_SRR1	SPRN_GSRR1
 
 #define CRIT_SET_KSTACK						            \
+	andi.	r10,r11,MSR_PR;							\
+	bne	1f;								\
+	BOOK3E_LOAD_EXC_LEVEL_STACK(CRIT);					\
 	ld	r1,PACA_CRIT_STACK(r13);				    \
-	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE;
+	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE;					\
+1:
 #define SPRN_CRIT_SRR0	SPRN_CSRR0
 #define SPRN_CRIT_SRR1	SPRN_CSRR1
 
 #define DBG_SET_KSTACK						            \
+	andi.	r10,r11,MSR_PR;							\
+	bne	1f;								\
+	BOOK3E_LOAD_EXC_LEVEL_STACK(DBG);					\
 	ld	r1,PACA_DBG_STACK(r13);					    \
-	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE;
+	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE;					\
+1:
 #define SPRN_DBG_SRR0	SPRN_DSRR0
 #define SPRN_DBG_SRR1	SPRN_DSRR1
 
 #define MC_SET_KSTACK						            \
+	andi.	r10,r11,MSR_PR;							\
+	bne	1f;								\
+	BOOK3E_LOAD_EXC_LEVEL_STACK(MC);					\
 	ld	r1,PACA_MC_STACK(r13);					    \
-	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE;
+	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE;					\
+1:
 #define SPRN_MC_SRR0	SPRN_MCSRR0
 #define SPRN_MC_SRR1	SPRN_MCSRR1
 
Signature · 1 line
1.7.9.5
#2 lore raw

PATCH v2 2/6 powerpc/book3e: store critical/machine/debug exception thread info

In reply to Tiejun Chen

We need to store thread info to these exception thread info like something we already did for PPC32.

---
 arch/powerpc/kernel/exceptions-64e.S |   15 +++++++++++++++
 1 file changed, 15 insertions(+)
arch/powerpc/kernel/exceptions-64e.S +15 -0
index 767f856..423a936 100644
@@ -58,6 +58,18 @@
 	std	r10,PACA_##level##_STACK(r13);
 #endif
 
+/* Store something to exception thread info */
+#define	BOOK3E_STORE_EXC_LEVEL_THEAD_INFO(type)					\
+	ld	r1,PACAKSAVE(r13);						\
+	CURRENT_THREAD_INFO(r14, r14);						\
+	CURRENT_THREAD_INFO(r15, r1);						\
+	ld	r10,TI_FLAGS(r14);		     				\
+	std	r10,TI_FLAGS(r15);			     			\
+	ld	r10,TI_PREEMPT(r14);		     				\
+	std	r10,TI_PREEMPT(r15);		     				\
+	ld	r10,TI_TASK(r14);			     			\
+	std	r10,TI_TASK(r15);
+
 /* Exception prolog code for all exceptions */
 #define EXCEPTION_PROLOG(n, intnum, type, addition)	    		    \
 	mtspr	SPRN_SPRG_##type##_SCRATCH,r13;	/* get spare registers */   \
@@ -95,6 +107,7 @@
 	BOOK3E_LOAD_EXC_LEVEL_STACK(CRIT);					\
 	ld	r1,PACA_CRIT_STACK(r13);				    \
 	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE;					\
+	BOOK3E_STORE_EXC_LEVEL_THEAD_INFO(CRIT);				\
 1:
 #define SPRN_CRIT_SRR0	SPRN_CSRR0
 #define SPRN_CRIT_SRR1	SPRN_CSRR1
@@ -105,6 +118,7 @@
 	BOOK3E_LOAD_EXC_LEVEL_STACK(DBG);					\
 	ld	r1,PACA_DBG_STACK(r13);					    \
 	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE;					\
+	BOOK3E_STORE_EXC_LEVEL_THEAD_INFO(DBG);					\
 1:
 #define SPRN_DBG_SRR0	SPRN_DSRR0
 #define SPRN_DBG_SRR1	SPRN_DSRR1
@@ -115,6 +129,7 @@
 	BOOK3E_LOAD_EXC_LEVEL_STACK(MC);					\
 	ld	r1,PACA_MC_STACK(r13);					    \
 	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE;					\
+	BOOK3E_STORE_EXC_LEVEL_THEAD_INFO(MC);					\
 1:
 #define SPRN_MC_SRR0	SPRN_MCSRR0
 #define SPRN_MC_SRR1	SPRN_MCSRR1
Signature · 1 line
1.7.9.5
#3 lore raw

PATCH v2 3/6 book3e/kgdb: update thread's dbcr0

In reply to Tiejun Chen

gdb always need to generate a single step properly to invoke a kgdb state. But with lazy interrupt, book3e can't always trigger a debug exception with a single step since the current is blocked for handling those pending exception, then we miss that expected dbcr configuration at last to generate a debug exception.

So here we also update thread's dbcr0 to make sure the current can go back with that missed dbcr0 configuration.

---
 arch/powerpc/kernel/kgdb.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)
arch/powerpc/kernel/kgdb.c +10 -3
index 8747447..eb30a40 100644
@@ -409,7 +409,7 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code,
 			       struct pt_regs *linux_regs)
 {
 	char *ptr = &remcom_in_buffer[1];
-	unsigned long addr;
+	unsigned long addr, dbcr0;
 
 	switch (remcom_in_buffer[0]) {
 		/*
@@ -426,8 +426,15 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code,
 		/* set the trace bit if we're stepping */
 		if (remcom_in_buffer[0] == 's') {
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
-			mtspr(SPRN_DBCR0,
-			      mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
+			dbcr0 = mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM;
+			mtspr(SPRN_DBCR0, dbcr0);
+#ifdef CONFIG_PPC_BOOK3E_64
+			/* With lazy interrut we have to update thread dbcr0 here
+			 * to make sure we can set debug properly at last to invoke
+			 * kgdb again to work well.
+			 */
+			current->thread.dbcr0 = dbcr0;
+#endif
 			linux_regs->msr |= MSR_DE;
 #else
 			linux_regs->msr |= MSR_SE;
Signature · 1 line
1.7.9.5
#4 lore raw

PATCH v2 4/6 book3e/kgdb: Fix a single stgep case of lazy IRQ

In reply to Tiejun Chen

When we're in kgdb_singlestep(), we have to work around to get thread_info by copying from the kernel stack before calling kgdb_handle_exception(), then copying it back afterwards.

But for PPC64, we have a lazy interrupt implementation. So after copying thread info frome kernle stack, if we need to replay an interrupt, we shouldn't restore that previous backup thread info to make sure we can replay an interrupt lately with a proper thread info.

This patch use __check_irq_replay() to guarantee this process.

---
 arch/powerpc/kernel/irq.c  |   10 ++++++++++
 arch/powerpc/kernel/kgdb.c |    3 ++-
 2 files changed, 12 insertions(+), 1 deletion(-)
arch/powerpc/kernel/irq.c +10 -0
index 4f97fe3..bb8d27a 100644
@@ -339,7 +339,17 @@ bool prep_irq_for_idle(void)
 	return true;
 }
 
+notrace unsigned int check_irq_replay(void)
+{
+	return __check_irq_replay();
+}
+#else
+notrace unsigned int check_irq_replay(void)
+{
+	return 0;
+}
 #endif /* CONFIG_PPC64 */
+EXPORT_SYMBOL(check_irq_replay);
 
 int arch_show_interrupts(struct seq_file *p, int prec)
 {
arch/powerpc/kernel/kgdb.c +2 -1
index eb30a40..2f22807 100644
@@ -151,6 +151,7 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs)
 	return 1;
 }
 
+extern notrace unsigned int check_irq_replay(void);
 static int kgdb_singlestep(struct pt_regs *regs)
 {
 	struct thread_info *thread_info, *exception_thread_info;
@@ -181,7 +182,7 @@ static int kgdb_singlestep(struct pt_regs *regs)
 
 	kgdb_handle_exception(0, SIGTRAP, 0, regs);
 
-	if (thread_info != exception_thread_info)
+	if ((thread_info != exception_thread_info) && (!check_irq_replay()))
 		/* Restore current_thread_info lastly. */
 		memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info);
 
Signature · 1 line
1.7.9.5
#5 lore raw

PATCH v2 5/6 powerpc/book3e: support kgdb for kernel space

In reply to Tiejun Chen

Currently we need to skip this for supporting KGDB.

---
 arch/powerpc/kernel/exceptions-64e.S |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
arch/powerpc/kernel/exceptions-64e.S +4 -1
index 423a936..6204681 100644
@@ -589,11 +589,14 @@ kernel_dbg_exc:
 	rfdi
 
 	/* Normal debug exception */
+1:
+#ifndef CONFIG_KGDB
 	/* XXX We only handle coming from userspace for now since we can't
 	 *     quite save properly an interrupted kernel state yet
 	 */
-1:	andi.	r14,r11,MSR_PR;		/* check for userspace again */
+	andi.	r14,r11,MSR_PR;		/* check for userspace again */
 	beq	kernel_dbg_exc;		/* if from kernel mode */
+#endif
 
 	/* Now we mash up things to make it look like we are coming on a
 	 * normal exception
Signature · 1 line
1.7.9.5
#6 lore raw

PATCH v2 6/6 kgdb/kgdbts: support ppc64

In reply to Tiejun Chen

We can't look up the address of the entry point of the function simply via that function symbol for all architectures.

For PPC64 ABI, actually there is a function descriptors structure.

A function descriptor is a three doubleword data structure that contains the following values:
* The first doubleword contains the address of the entry point of the function.
* The second doubleword contains the TOC base address for the function.
* The third doubleword contains the environment pointer for languages such as Pascal and PL/1.

So we should call a wapperred dereference_function_descriptor() to get the address of the entry point of the function.

Note this is also safe for other architecture after refer to "include/asm-generic/sections.h" since:

dereference_function_descriptor(p) always is (p) if without arched definition.

---
 drivers/misc/kgdbts.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/misc/kgdbts.c +2 -0
index 3aa9a96..4799e1f 100644
@@ -103,6 +103,7 @@
 #include <linux/delay.h>
 #include <linux/kthread.h>
 #include <linux/module.h>
+#include <asm/sections.h>
 
 #define v1printk(a...) do { \
 	if (verbose) \
@@ -222,6 +223,7 @@ static unsigned long lookup_addr(char *arg)
 		addr = (unsigned long)do_fork;
 	else if (!strcmp(arg, "hw_break_val"))
 		addr = (unsigned long)&hw_break_val;
+	addr = (unsigned long )dereference_function_descriptor((void *)addr);
 	return addr;
 }
 
Signature · 1 line
1.7.9.5