perf stat: add interval counter printing
v5 cover perf stat: add interval counter printing
This small patchset extends perf stat with the -I option.
The -I option enables interval printing. It expects an interval duration in milliseconds. Minimum is 100ms. Once, activated perf stat prints events deltas since last printout. All modes are supported.
$ perf stat -I 1000 -e cycles noploop 10
noploop for 10 seconds
# time counts events
1.000109853 2,388,560,546 cycles
2.000262846 2,393,332,358 cycles
3.000354131 2,393,176,537 cycles
4.000439503 2,393,203,790 cycles
5.000527075 2,393,167,675 cycles
6.000609052 2,393,203,670 cycles
7.000691082 2,393,175,678 cyclesThe output format makes it easy to feed into a plotting program such as gnuplot when the -I option is used in combination with the -x option:
$ perf stat -x, -I 1000 -e cycles noploop 10 noploop for 10 seconds 1.000084113,2378775498,cycles 2.000245798,2391056897,cycles 3.000354445,2392089414,cycles 4.000459115,2390936603,cycles 5.000565341,2392108173,cycles
The first patch adds the code to keep previous counts. The second is the actual extension of perf stat.
In v2, we changed the option from -T to -I based on feedback from Andi Kleen (who is using -T in an upcoming patch).
In v3, added compute_deltas() to evsel.c to factorize deltas computation based on Jiri's comments.
In v4, we made sure that counts are printed in case the run is interrupted by CTRL-C based on Andi Kleen's feedback.
In v5, we added the column headings printed every 25 lines. Cleaned up the code some more based on Namhyung's comments.
Stephane Eranian (2):
perf tools: add evsel prev_raw_count field
perf stat: add interval printing
tools/perf/Documentation/perf-stat.txt | 4 + tools/perf/builtin-stat.c | 165 +++++++++++++++++++++++++++++--- tools/perf/util/evsel.c | 26 +++++ tools/perf/util/evsel.h | 1 + 4 files changed, 181 insertions(+), 15 deletions(-)
Signature · 1 line
1.7.9.5
PATCH v5 1/2 perf tools: add evsel prev_raw_count field
This field will be used by commands which print
counter deltas on regular timer intervals,
such as perf stat -I.
--- tools/perf/util/evsel.c | 26 ++++++++++++++++++++++++++ tools/perf/util/evsel.h | 1 + 2 files changed, 27 insertions(+)
tools/perf/util/evsel.c +26 -0
@@ -631,6 +631,28 @@ void perf_evsel__delete(struct perf_evsel *evsel)free (evsel); } +static inline void compute_deltas (struct perf_evsel *evsel, +int cpu, +struct perf_counts_values *count) +{ +struct perf_counts_values tmp; + +if (!evsel->prev_raw_counts) +return ; + +if (cpu ==-1 ) { + tmp = evsel->prev_raw_counts->aggr; + evsel->prev_raw_counts->aggr = *count; + }else { + tmp = evsel->prev_raw_counts->cpu[cpu]; + evsel->prev_raw_counts->cpu[cpu] = *count; + } + + count->val = count->val - tmp.val; + count->ena = count->ena - tmp.ena; + count->run = count->run - tmp.run; +} +int __perf_evsel__read_on_cpu (struct perf_evsel *evsel,int cpu,int thread,bool scale) {
@@ -646,6 +668,8 @@ int __perf_evsel__read_on_cpu(struct perf_evsel *evsel,if (readn (FD (evsel, cpu, thread), &count, nv *sizeof (u64)) <0 )return -errno; +compute_deltas (evsel, cpu, &count); +if (scale) {if (count.run ==0 ) count.val =0 ;
@@ -684,6 +708,8 @@ int __perf_evsel__read(struct perf_evsel *evsel, } } +compute_deltas (evsel,-1 , aggr); + evsel->counts->scaled =0 ;if (scale) {if (aggr->run ==0 ) {
tools/perf/util/evsel.h +1 -0
@@ -53,6 +53,7 @@ struct perf_evsel {struct xyarray *sample_id;u64 *id;struct perf_counts *counts; +struct perf_counts *prev_raw_counts;int idx;u32 ids;struct hists hists;
Signature · 1 line
1.7.9.5
PATCH v5 2/2 perf stat: add interval printing
In reply to Stephane EranianThis patch adds a new printing mode for perf stat. It allows internval printing. That means perf stat can now print event deltas at regular time interval. This is useful to detect phases in programs.
The -I option enables interval printing. It expects an interval duration in milliseconds. Minimum is 100ms. Once, activated perf stat prints events deltas since last printout. All modes are supported.
$ perf stat -I 1000 -e cycles noploop 10
noploop for 10 seconds
# time counts events
1.000109853 2,388,560,546 cycles
2.000262846 2,393,332,358 cycles
3.000354131 2,393,176,537 cycles
4.000439503 2,393,203,790 cycles
5.000527075 2,393,167,675 cycles
6.000609052 2,393,203,670 cycles
7.000691082 2,393,175,678 cyclesThe output format makes it easy to feed into a plotting program such as gnuplot when the -I option is used in combination with the -x option:
$ perf stat -x, -I 1000 -e cycles noploop 10 noploop for 10 seconds 1.000084113,2378775498,cycles 2.000245798,2391056897,cycles 3.000354445,2392089414,cycles 4.000459115,2390936603,cycles 5.000565341,2392108173,cycles
--- tools/perf/Documentation/perf-stat.txt | 4 + tools/perf/builtin-stat.c | 165 +++++++++++++++++++++++++++++--- 2 files changed, 154 insertions(+), 15 deletions(-)
tools/perf/Documentation/perf-stat.txt +4 -0
@@ -114,6 +114,10 @@ Log output to fd, instead of stderr. Complementary to --output, and mutually ex perf stat --repeat 10 --null --sync --pre 'make -s O=defconfig-build/clean' -- make -s -j64 O=defconfig-build/ bzImage +-I msecs:: +--interval-print msecs:: + print count deltas every N milliseconds (minimum: 100ms) + example: perf stat -I 1000 -e cycles -a sleep 5 EXAMPLES --------
tools/perf/builtin-stat.c +150 -15
315 lines not on this page · raw message
Signature · 1 line
1.7.9.5