Skip to contentSkip to conversation

em28xx: bump driver version to 0.2.0

PATCH In review Frank Schäfer 2 participants 2 messages Feb 11, 2013 – Feb 12, 2013

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 em28xx: bump driver version to 0.2.0

The em28xx driver has changed much, especially since kernel 3.8. So it's time to bump the driver version.

Changes since kernel 3.8:
- converted the driver to videobuf2
- converted the driver to the v4l2-ctrl framework
- added USB bulk transfer support
- use USB bulk transfers by default for webcams (allows streaming from multiple devices at the same time)
- added image quality bridge controls: contrast, brightness, saturation, blue balance, red balance, sharpness
- removed dependency from module ir-kbd-i2c
- cleaned up the frame data processing code
- removed some unused/obsolete code
- made remote controls of devices with external (i2c) receiver/decoder work again
- fixed audio over USB for device "Terratec Cinergy 250"
- several v4l2 compliance fixes and improvements (including fixes for ioctls enabling/disabling)
- lots of further bug fixes and code improvements

---
 drivers/media/usb/em28xx/em28xx-video.c |    2 +-

1 Datei geändert, 1 Zeile hinzugefügt(+), 1 Zeile entfernt(-)

drivers/media/usb/em28xx/em28xx-video.c +1 -1
index 48b937d..93fc620 100644
@@ -52,7 +52,7 @@
 
 #define DRIVER_DESC         "Empia em28xx based USB video device driver"
 
-#define EM28XX_VERSION "0.1.3"
+#define EM28XX_VERSION "0.2.0"
 
 #define em28xx_videodbg(fmt, arg...) do {\
 	if (video_debug) \
Signature · 1 line
1.7.10.4
Acked-by on v1 1/1
#1 lore raw
Quoted 17 lines · On Mon February 11 2013 19:07:55 Frank Schäfer wrote:

The em28xx driver has changed much, especially since kernel 3.8. So it's time to bump the driver version.

Changes since kernel 3.8:
- converted the driver to videobuf2
- converted the driver to the v4l2-ctrl framework
- added USB bulk transfer support
- use USB bulk transfers by default for webcams (allows streaming from multiple devices at the same time)
- added image quality bridge controls: contrast, brightness, saturation, blue balance, red balance, sharpness
- removed dependency from module ir-kbd-i2c
- cleaned up the frame data processing code
- removed some unused/obsolete code
- made remote controls of devices with external (i2c) receiver/decoder work again
- fixed audio over USB for device "Terratec Cinergy 250"
- several v4l2 compliance fixes and improvements (including fixes for ioctls enabling/disabling)
- lots of further bug fixes and code improvements

Quoted 1 line
Quoted 18 lines
---
 drivers/media/usb/em28xx/em28xx-video.c |    2 +-

1 Datei geändert, 1 Zeile hinzugefügt(+), 1 Zeile entfernt(-)

drivers/media/usb/em28xx/em28xx-video.c +1 -1
index 48b937d..93fc620 100644
@@ -52,7 +52,7 @@
 
 #define DRIVER_DESC         "Empia em28xx based USB video device driver"
 
-#define EM28XX_VERSION "0.1.3"
+#define EM28XX_VERSION "0.2.0"
 
 #define em28xx_videodbg(fmt, arg...) do {\
 	if (video_debug) \