em28xx: bump driver version to 0.2.0
Subsystems (2)
PATCH 1/1 em28xx: bump driver version to 0.2.0
The em28xx driver has changed much, especially since kernel 3.8. So it's time to bump the driver version.
Changes since kernel 3.8:
- converted the driver to videobuf2
- converted the driver to the v4l2-ctrl framework
- added USB bulk transfer support
- use USB bulk transfers by default for webcams (allows streaming from multiple devices at the same time)
- added image quality bridge controls: contrast, brightness, saturation, blue balance, red balance, sharpness
- removed dependency from module ir-kbd-i2c
- cleaned up the frame data processing code
- removed some unused/obsolete code
- made remote controls of devices with external (i2c) receiver/decoder work again
- fixed audio over USB for device "Terratec Cinergy 250"
- several v4l2 compliance fixes and improvements (including fixes for ioctls enabling/disabling)
- lots of further bug fixes and code improvements
--- drivers/media/usb/em28xx/em28xx-video.c | 2 +-
1 Datei geändert, 1 Zeile hinzugefügt(+), 1 Zeile entfernt(-)
drivers/media/usb/em28xx/em28xx-video.c +1 -1
@@ -52,7 +52,7 @@#define DRIVER_DESC "Empia em28xx based USB video device driver" -#define EM28XX_VERSION "0.1.3" +#define EM28XX_VERSION "0.2.0" #define em28xx_videodbg(fmt, arg...) do {\ if (video_debug) \
Signature · 1 line
1.7.10.4
Quoted 17 lines · On Mon February 11 2013 19:07:55 Frank Schäfer wrote:
The em28xx driver has changed much, especially since kernel 3.8. So it's time to bump the driver version.
Changes since kernel 3.8:
- converted the driver to videobuf2
- converted the driver to the v4l2-ctrl framework
- added USB bulk transfer support
- use USB bulk transfers by default for webcams (allows streaming from multiple devices at the same time)
- added image quality bridge controls: contrast, brightness, saturation, blue balance, red balance, sharpness
- removed dependency from module ir-kbd-i2c
- cleaned up the frame data processing code
- removed some unused/obsolete code
- made remote controls of devices with external (i2c) receiver/decoder work again
- fixed audio over USB for device "Terratec Cinergy 250"
- several v4l2 compliance fixes and improvements (including fixes for ioctls enabling/disabling)
- lots of further bug fixes and code improvements
Quoted 1 line
Signed-off-by Frank Schäfer <[email protected]>
Quoted 18 lines
--- drivers/media/usb/em28xx/em28xx-video.c | 2 +-1 Datei geändert, 1 Zeile hinzugefügt(+), 1 Zeile entfernt(-)
drivers/media/usb/em28xx/em28xx-video.c +1
-1@@ -52,7 +52,7 @@#define DRIVER_DESC "Empia em28xx based USB video device driver" -#define EM28XX_VERSION "0.1.3" +#define EM28XX_VERSION "0.2.0" #define em28xx_videodbg(fmt, arg...) do {\ if (video_debug) \