Skip to contentSkip to conversation

mx28evk: Disable CONFIG_CMD_I2C

PATCH New Fabio Estevam 2 participants 2 messages Mar 8, 2013 – Mar 20, 2013

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mx28evk: Disable CONFIG_CMD_I2C

From: Fabio Estevam <[email protected]>

When loading a Freescale 2.6.35 on a mx28evk the following issue is seen:

sgtl5000_hw_read: read reg error : Reg 0x00
Device with ID register 0 is not a SGTL5000

Disabling CONFIG_CMD_I2C makes the sgtl5000 probe to succeed.

Mainline kernel does not show this problem.

Until the real cause is not identified, disable 'CONFIG_CMD_I2C' for the time being.

---
Stefano,

Since 2013.04 is approaching I prefer to disable this option until the real cause is identified.

This patch applies on top of http://patchwork.ozlabs.org/patch/225950/

 include/configs/mx28evk.h |    1 -
 1 file changed, 1 deletion(-)
include/configs/mx28evk.h +0 -1
index 9cc236f..cf93ec8 100644
@@ -68,7 +68,6 @@
 #define CONFIG_CMD_SPI
 #define CONFIG_CMD_USB
 #define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_NAND
 
 /*
Signature · 1 line
1.7.9.5
#1 lore raw

PATCH 1/1 mx28evk: Disable CONFIG_CMD_I2C

Quoted 32 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

When loading a Freescale 2.6.35 on a mx28evk the following issue is seen:

sgtl5000_hw_read: read reg error : Reg 0x00
Device with ID register 0 is not a SGTL5000

Disabling CONFIG_CMD_I2C makes the sgtl5000 probe to succeed.

Mainline kernel does not show this problem.

Until the real cause is not identified, disable 'CONFIG_CMD_I2C' for the time being.

---
Stefano,

Since 2013.04 is approaching I prefer to disable this option until the real cause is identified.

This patch applies on top of http://patchwork.ozlabs.org/patch/225950/

 include/configs/mx28evk.h |    1 -
 1 file changed, 1 deletion(-)
include/configs/mx28evk.h +0 -0
index 9cc236f..cf93ec8 100644

include/configs/mx28evk.h line 73

Quoted 7 lines
include/configs/mx28evk.h +0 -1
@@ -68,7 +68,6 @@
 #define CONFIG_CMD_SPI
 #define CONFIG_CMD_USB
 #define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_I2C
 #define CONFIG_CMD_NAND
 
 /*

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================