hwmon: (pmbus/lm25066) Add support for LM25056
Subsystems (2)
Guenter Roeck
maintainerPATCH 4/4 hwmon: (pmbus/lm25066) Add support for LM25056
Signed-off-by Guenter Roeck <[email protected]>
--- Documentation/hwmon/lm25066 | 18 +++++- drivers/hwmon/pmbus/Kconfig | 2 +- drivers/hwmon/pmbus/lm25066.c | 132 ++++++++++++++++++++++++++++++++++++++--- 3 files changed, 139 insertions(+), 13 deletions(-)
Documentation/hwmon/lm25066 +15 -3
@@ -1,7 +1,13 @@ -Kernel driver max8688 +Kernel driver lm25066 ========== Supported chips: + * TI LM25056 + Prefix: 'lm25056' + Addresses scanned: - + Datasheets: + http://www.ti.com/lit/gpn/lm25056 + http://www.ti.com/lit/gpn/lm25056a * National Semiconductor LM25066 Prefix: 'lm25066' Addresses scanned: -
@@ -25,8 +31,9 @@ Author: Guenter Roeck <[email protected]> Description ----------- -This driver supports hardware montoring for National Semiconductor LM25066, -LM5064, and LM5064 Power Management, Monitoring, Control, and Protection ICs. +This driver supports hardware montoring for National Semiconductor / TI LM25056, +LM25066, LM5064, and LM5064 Power Management, Monitoring, Control, and +Protection ICs. The driver is a client driver to the core PMBus driver. Please see Documentation/hwmon/pmbus for details on PMBus client drivers.
@@ -62,8 +69,13 @@ in1_max_alarm Input voltage high alarm. in2_label "vmon" in2_input Measured voltage on VAUX pin +in2_min Minimum VAUX voltage (LM25056 only). +in2_max Maximum VAUX voltage (LM25056 only). +in2_min_alarm VAUX voltage low alarm (LM25056 only). +in2_max_alarm VAUX voltage high alarm (LM25056 only). in3_label "vout1" + Not supported on LM25056. in3_input Measured output voltage. in3_average Average measured output voltage. in3_min Minimum output voltage.
drivers/hwmon/pmbus/Kconfig +1 -1
@@ -42,7 +42,7 @@ config SENSORS_LM25066 default n help If you say yes here you get hardware monitoring support for National - Semiconductor LM25066, LM5064, and LM5066. + Semiconductor LM25056, LM25066, LM5064, and LM5066. This driver can also be built as a module. If so, the module will be called lm25066.
drivers/hwmon/pmbus/lm25066.c +123 -9
189 lines not on this page · raw message
Signature · 7 lines
1.7.9.7 _______________________________________________ lm-sensors mailing list [email protected] http://lists.lm-sensors.org/mailman/listinfo/lm-sensors