Skip to contentSkip to conversation

hwmon: (pmbus/lm25066) Add support for LM25056

PATCH New Guenter Roeck 1 participant 1 message Mar 13, 2013

Subsystems (2)
lore
Share & tools
lore

Guenter Roeck

author maintainer
#0 lore raw

PATCH 4/4 hwmon: (pmbus/lm25066) Add support for LM25056

---
 Documentation/hwmon/lm25066   |   18 +++++-
 drivers/hwmon/pmbus/Kconfig   |    2 +-
 drivers/hwmon/pmbus/lm25066.c |  132 ++++++++++++++++++++++++++++++++++++++---
 3 files changed, 139 insertions(+), 13 deletions(-)
Documentation/hwmon/lm25066 +15 -3
index 2bc5ba6..c1b57d7 100644
@@ -1,7 +1,13 @@
-Kernel driver max8688
+Kernel driver lm25066
 ========== 
 Supported chips:
+  * TI LM25056
+    Prefix: 'lm25056'
+    Addresses scanned: -
+    Datasheets:
+	http://www.ti.com/lit/gpn/lm25056
+	http://www.ti.com/lit/gpn/lm25056a
   * National Semiconductor LM25066
     Prefix: 'lm25066'
     Addresses scanned: -
@@ -25,8 +31,9 @@ Author: Guenter Roeck <[email protected]>
 Description
 -----------
 
-This driver supports hardware montoring for National Semiconductor LM25066,
-LM5064, and LM5064 Power Management, Monitoring, Control, and Protection ICs.
+This driver supports hardware montoring for National Semiconductor / TI LM25056,
+LM25066, LM5064, and LM5064 Power Management, Monitoring, Control, and
+Protection ICs.
 
 The driver is a client driver to the core PMBus driver. Please see
 Documentation/hwmon/pmbus for details on PMBus client drivers.
@@ -62,8 +69,13 @@ in1_max_alarm		Input voltage high alarm.
 
 in2_label		"vmon"
 in2_input		Measured voltage on VAUX pin
+in2_min			Minimum VAUX voltage (LM25056 only).
+in2_max			Maximum VAUX voltage (LM25056 only).
+in2_min_alarm		VAUX voltage low alarm (LM25056 only).
+in2_max_alarm		VAUX voltage high alarm (LM25056 only).
 
 in3_label		"vout1"
+			Not supported on LM25056.
 in3_input		Measured output voltage.
 in3_average		Average measured output voltage.
 in3_min			Minimum output voltage.
drivers/hwmon/pmbus/Kconfig +1 -1
index b1adad6..39cc63e 100644
@@ -42,7 +42,7 @@ config SENSORS_LM25066
 	default n
 	help
 	  If you say yes here you get hardware monitoring support for National
-	  Semiconductor LM25066, LM5064, and LM5066.
+	  Semiconductor LM25056, LM25066, LM5064, and LM5066.
 
 	  This driver can also be built as a module. If so, the module will
 	  be called lm25066.
drivers/hwmon/pmbus/lm25066.c +123 -9

189 lines not on this page · raw message

Signature · 7 lines
1.7.9.7


_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors