Skip to contentSkip to conversation

Add initial support for Wandboard dual lite and solo.

PATCH New Fabio Estevam 2 participants 2 messages Mar 15, 2013 – Mar 20, 2013 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

PATCH v5 1/1 Add initial support for Wandboard dual lite and solo.

From: Fabio Estevam <[email protected]>

Wandboard is a development board that has two variants: one version based on mx6 dual lite and another one based on mx6 solo.

For more details about Wandboard, please refer to: http://www.wandboard.org/

---
Changes since v4:
- Improved commit log
- Rebased against the latest u-boot-imx tree
- Added README
- Remove hardcode in get_board_rev()
- Define MACH_TYPE_WANDBOARD
- Moved includes to the start of the file
- Use less space for CONFIG_SYS_MALLOC_LEN
- Use 5 seconds for boot delay
- Removed CONFIG_PREBOOT
- Adjust fdt_file for the solo variant
- Increase CONFIG_SYS_MEMTEST_END
Changes since v3:
- Rebased after fixing nitrogen DDR size:
http://marc.info/?l=u-boot&m=136321557726201&w=2

Changes since v2:
- Also added support to the mx6solo variant.
- Rebased against u-boot-imx

Changes since v1:
- Use get_ram_size
- Remove ARP_TIMEOUT
- Remove unneeded "1u"

 MAINTAINERS                                |    1 +
 arch/arm/include/asm/arch-mx6/mx6dl_pins.h |    3 +
 board/wandboard/Makefile                   |   29 ++++
 board/wandboard/README                     |   42 ++++++
 board/wandboard/wandboard.c                |  181 ++++++++++++++++++++++++
 boards.cfg                                 |    2 +
 include/configs/wandboard.h                |  211 ++++++++++++++++++++++++++++
 7 files changed, 469 insertions(+)
 create mode 100644 board/wandboard/Makefile
 create mode 100644 board/wandboard/README
 create mode 100644 board/wandboard/wandboard.c
 create mode 100644 include/configs/wandboard.h
MAINTAINERS +1 -0
index f490d62..791afce 100644
@@ -664,6 +664,7 @@ Fabio Estevam <[email protected]>
 	mx53smd		i.MX53
 	mx6qsabresd	i.MX6Q
 	mx6qsabreauto	i.MX6Q
+	wandboard	i.MX6DL/S
 
 Daniel Gorsulowski <[email protected]>
 
arch/arm/include/asm/arch-mx6/mx6dl_pins.h +3 -0
index 9494e41..9846f1b 100644
@@ -50,6 +50,8 @@
 #define NO_MUX_I                0
 #define NO_PAD_I                0
 enum {
+	MX6_PAD_CSI0_DAT10__UART1_TXD		= IOMUX_PAD(0x0360, 0x004C, 3, 0x0000, 0, 0),
+	MX6_PAD_CSI0_DAT11__UART1_RXD		= IOMUX_PAD(0x0364, 0x0050, 3, 0x08FC, 1, 0),
 	MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x03B0, 0x009C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15	= IOMUX_PAD(0x03B4, 0x00A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2	= IOMUX_PAD(0x03B8, 0x00A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
@@ -90,6 +92,7 @@ enum {
 	MX6_PAD_EIM_D27__UART2_RXD		= IOMUX_PAD(0x0540, 0x0170, 4, 0x0904, 1, 0),
 	MX6_PAD_EIM_D28__I2C1_SDA		= IOMUX_PAD(0x0544, 0x0174, 1 | IOMUX_CONFIG_SION, 0x086C, 1, 0),
 	MX6_PAD_EIM_D28__GPIO_3_28		= IOMUX_PAD(0x0544, 0x0174, 5, 0x0000, 0, 0),
+	MX6_PAD_EIM_D29__GPIO_3_29		= IOMUX_PAD(0x0548, 0x0178, 5, 0x0000, 0, 0),
 	MX6_PAD_ENET_MDC__ENET_MDC		= IOMUX_PAD(0x05B8, 0x01E8, 1, 0x0000, 0,  0),
 	MX6_PAD_ENET_MDIO__ENET_MDIO		= IOMUX_PAD(0x05BC, 0x01EC, 1, 0x0810, 0, 0),
 	MX6_PAD_ENET_REF_CLK__ENET_TX_CLK	= IOMUX_PAD(0x05C0, 0x01F0, 1, 0x0000, 0, 0),
board/wandboard/Makefile new file +29 -0
new file mode 100644
index 0000000..014ea6c
@@ -0,0 +1,29 @@
+#
+# (C) Copyright 2013 Freescale Semiconductor, Inc.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB    = $(obj)lib$(BOARD).o
+
+COBJS  := wandboard.o
+
+SRCS   := $(COBJS:.o=.c)
+OBJS   := $(addprefix $(obj),$(COBJS))
+
+$(LIB):        $(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
board/wandboard/README new file +42 -0

42 lines not on this page · raw message

board/wandboard/wandboard.c new file +181 -0

181 lines not on this page · raw message

boards.cfg +2 -0
index 84f96e0..9fd4bd6 100644
@@ -261,6 +261,8 @@ nitrogen6q                   arm         armv7       nitrogen6x          boundar
 nitrogen6q2g                 arm         armv7       nitrogen6x          boundary       mx6		nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q,DDR_MB=2048
 nitrogen6s                   arm         armv7       nitrogen6x          boundary       mx6		nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512
 nitrogen6s1g                 arm         armv7       nitrogen6x          boundary       mx6		nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024
+wandboard_dl		     arm	 armv7	     wandboard		 -		mx6 wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024
+wandboard_solo		     arm	 armv7	     wandboard		 -		mx6 wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512
 cm_t35                       arm         armv7       cm_t35              -              omap3
 omap3_overo                  arm         armv7       overo               -              omap3
 omap3_pandora                arm         armv7       pandora             -              omap3
include/configs/wandboard.h new file +211 -0

211 lines not on this page · raw message

Signature · 1 line
1.7.9.5
#1 lore raw

PATCH v5 1/1 Add initial support for Wandboard dual lite and solo.

Quoted 9 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

Wandboard is a development board that has two variants: one version based on mx6 dual lite and another one based on mx6 solo.

For more details about Wandboard, please refer to: http://www.wandboard.org/

---

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================