Skip to contentSkip to conversation

musb: am335x: disable bulk split-combine feature

PATCH In review Bin Liu 2 participants 4 messages Mar 21, 2013 – Apr 8, 2013 USB

lore
Share & tools
lore

Bin Liu

author
#0 lore raw

PATCH 1/1 musb: am335x: disable bulk split-combine feature

On TI AM335x devices, MUSB has bulk split/combine feature enabled in the ConfigData register, but the current MUSB driver does not support it yet. Therefore, disable the feature for now, until the driver adds the support.

One usecase which is broken because of this feature is that Ether gadget stops working in Fullspeed mode (by un-defining CONFIG_USB_GADGET_DUALSPEED)

After desabled this feature, MUSB driver send packets in proper size (no more than 64 bytes) in Fullspeed mode.

This has been validated with Ether gadget in Fullspeed mode on AM335x EVM.

---
 drivers/usb/musb-new/musb_core.c |    5 +++++
 include/configs/am335x_evm.h     |    1 +
 2 files changed, 6 insertions(+)
drivers/usb/musb-new/musb_core.c +5 -0
index 040a5c0..aa647e6 100644
@@ -1421,6 +1421,7 @@ static int __devinit musb_core_init(u16 musb_type, struct musb *musb)
 		strcat(aInfo, ", dyn FIFOs");
 		musb->dyn_fifo = true;
 	}
+#ifndef CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
 	if (reg & MUSB_CONFIGDATA_MPRXE) {
 		strcat(aInfo, ", bulk combine");
 		musb->bulk_combine = true;
@@ -1429,6 +1430,10 @@ static int __devinit musb_core_init(u16 musb_type, struct musb *musb)
 		strcat(aInfo, ", bulk split");
 		musb->bulk_split = true;
 	}
+#else
+	musb->bulk_combine = false;
+	musb->bulk_split = false;
+#endif
 	if (reg & MUSB_CONFIGDATA_HBRXE) {
 		strcat(aInfo, ", HB-ISO Rx");
 		musb->hb_iso_rx = true;
include/configs/am335x_evm.h +1 -0
index 74a70ee..faf9581 100644
@@ -450,6 +450,7 @@
 #define CONFIG_ARCH_MISC_INIT
 #define CONFIG_MUSB_GADGET
 #define CONFIG_MUSB_PIO_ONLY
+#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT
 #define CONFIG_USB_GADGET_DUALSPEED
 #define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_MUSB_HOST
Signature · 1 line
1.7.9.5
author
#1 lore raw

PATCH 1/1 musb: set MUSB speed based on CONFIG

Do not config MUSB to highspeed mode if CONFIG_USB_GADGET_DUALSPEED is not set, in which case Ether gadget only operates in fullspeed.

---
 drivers/usb/musb-new/musb_core.c  |    2 ++
 drivers/usb/musb-new/musb_uboot.c |    2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)
drivers/usb/musb-new/musb_core.c +2 -0
index aa647e6..da93571 100644
@@ -943,7 +943,9 @@ void musb_start(struct musb *musb)
 
 	/* put into basic highspeed mode and start session */
 	musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE
+#ifdef CONFIG_USB_GADGET_DUALSPEED
 						| MUSB_POWER_HSENAB
+#endif
 						/* ENSUSPEND wedges tusb */
 						/* | MUSB_POWER_ENSUSPEND */
 						);
drivers/usb/musb-new/musb_uboot.c +1 -1
index 096c4f4..ee3e6c5 100644
@@ -174,7 +174,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
 {
 	int ret;
 
-	if (!driver || driver->speed < USB_SPEED_HIGH || !driver->bind ||
+	if (!driver || driver->speed < USB_SPEED_FULL || !driver->bind ||
 	    !driver->setup) {
 		printf("bad parameter.\n");
 		return -EINVAL;
Signature · 1 line
1.7.9.5
#2 lore raw

[U-Boot] musb: set MUSB speed based on CONFIG

Quoted 5 lines · Bin Liu

Do not config MUSB to highspeed mode if CONFIG_USB_GADGET_DUALSPEED is not set, in which case Ether gadget only operates in fullspeed.

Applied to u-boot-ti/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130408/1a2deced/attachment.pgp>
#3 lore raw
In reply to Bin Liu
Quoted 9 lines · Bin Liu

On TI AM335x devices, MUSB has bulk split/combine feature enabled in the ConfigData register, but the current MUSB driver does not support it yet. Therefore, disable the feature for now, until the driver adds the support.

One usecase which is broken because of this feature is that Ether gadget stops working in Fullspeed mode (by un-defining CONFIG_USB_GADGET_DUALSPEED)

Quoted 7 lines

After desabled this feature, MUSB driver send packets in proper size (no more than 64 bytes) in Fullspeed mode.

This has been validated with Ether gadget in Fullspeed mode on AM335x EVM.

Applied to u-boot-ti/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130408/8bea7571/attachment.pgp>