powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
PATCH v2 1/5 powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
IFC errata A003399 is valid for IFC NOR boot i.e.if no on-board NOR flash or no NOR boot, do not compile its workaround.
---
Based upon git://git.denx.de/u-boot.git branch master Changes for v2:
- Add CONFIG_A003399_NOR_WORKAROUND for errata workaround
- Add CONFIG_A003399_NOR_WORKAROUND in README
README | 4 ++++ arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 9 ++++++--- arch/powerpc/cpu/mpc8xxx/fsl_ifc.c | 2 +- 3 files changed, 11 insertions(+), 4 deletions(-)
README +4 -0
@@ -414,6 +414,10 @@ The following options need to be configured: See Freescale App Note 4493 for more information about this erratum. + CONFIG_A003399_NOR_WORKAROUND + Enables a workaround for IFC erratum A003399. It is only + requred during NOR boot. + CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY This is the value to write into CCSR offset 0x18600
arch/powerpc/cpu/mpc85xx/cpu_init_early.c +6 -3
@@ -25,7 +25,8 @@DECLARE_GLOBAL_DATA_PTR ; -#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399 ) && !defined(CONFIG_SYS_RAMBOOT ) +#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399 )\ + && defined(CONFIG_A003399_NOR_WORKAROUND )void setup_ifc (void ) {struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR ;
@@ -99,7 +100,8 @@ void cpu_init_early_f(void)#ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549 ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);#endif -#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399 ) && !defined(CONFIG_SYS_RAMBOOT ) +#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399 )\ + && defined(CONFIG_A003399_NOR_WORKAROUND )ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;u32 *dst, *src;void (*setup_ifc_sram)(void );
@@ -138,7 +140,8 @@ void cpu_init_early_f(void)* Work Around for IFC Erratum A003399, issue will hit only when execution * from NOR Flash */ -#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399 ) && !defined(CONFIG_SYS_RAMBOOT ) +#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399 )\ + && defined(CONFIG_A003399_NOR_WORKAROUND )#define SRAM_BASE_ADDR (0x00000000)/* TLB for SRAM */ mas0 =MAS0_TLBSEL (1 ) |MAS0_ESEL (9 );
arch/powerpc/cpu/mpc8xxx/fsl_ifc.c +1 -1
@@ -43,7 +43,7 @@ void init_early_memctl_regs(void)set_ifc_ftim (IFC_CS0 ,IFC_FTIM2 ,CONFIG_SYS_CS0_FTIM2 );set_ifc_ftim (IFC_CS0 ,IFC_FTIM3 ,CONFIG_SYS_CS0_FTIM3 ); -#if !defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399 ) || defined(CONFIG_SYS_RAMBOOT ) +#ifndef CONFIG_A003399_NOR_WORKAROUND #ifdef CONFIG_SYS_CSPR0_EXT set_ifc_cspr_ext (IFC_CS0 ,CONFIG_SYS_CSPR0_EXT );#endif
Signature · 1 line
1.7.9.5
PATCH v2 1/5 powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
Quoted 37 lines · Prabhakar Kushwaha
IFC errata A003399 is valid for IFC NOR boot i.e.if no on-board NOR flash or
no NOR boot, do not compile its workaround.Signed-off-by Prabhakar Kushwaha <[email protected]>---
Based upongit://git.denx.de/u-boot.gitbranch master Changes for v2:
- AddCONFIG_A003399_NOR_WORKAROUNDfor errata workaround
- AddCONFIG_A003399_NOR_WORKAROUNDin READMEREADME | 4 ++++ arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 9 ++++++--- arch/powerpc/cpu/mpc8xxx/fsl_ifc.c | 2 +- 3 files changed, 11 insertions(+), 4 deletions(-)README +4
-0@@ -414,6 +414,10 @@ The following options need to be configured: See Freescale App Note 4493 for more information about this erratum. + CONFIG_A003399_NOR_WORKAROUND + Enables a workaround for IFC erratum A003399. It is only + requred during NOR boot. + CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY This is the value to write into CCSR offset 0x18600arch/powerpc/cpu/mpc85xx/cpu_init_early.c +0
-0
arch/powerpc/cpu/mpc85xx/cpu_init_early.c line 30
Quoted 7 lines
arch/powerpc/cpu/mpc85xx/cpu_init_early.c +2
-1@@ -25,7 +25,8 @@DECLARE_GLOBAL_DATA_PTR ; -#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399 ) && !defined(CONFIG_SYS_RAMBOOT) +#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399 )\ + && defined(CONFIG_A003399_NOR_WORKAROUND )
Why would CONFIG_A003399_NOR_WORKAROUND be enabled if CONFIG_SYS_FSL_ERRATUM_IFC_A003399 isn't?
-Scott
PATCH v2 1/5 powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
Quoted 41 lines · Scott Wood
Quoted 40 lines · Prabhakar Kushwaha
IFC errata A003399 is valid for IFC NOR boot i.e.if no on-board NOR flash or
no NOR boot, do not compile its workaround.Signed-off-by Prabhakar Kushwaha <[email protected]>---
Based upongit://git.denx.de/u-boot.gitbranch master Changes for v2:
- AddCONFIG_A003399_NOR_WORKAROUNDfor errata workaround
- AddCONFIG_A003399_NOR_WORKAROUNDin READMEREADME | 4 ++++ arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 9 ++++++--- arch/powerpc/cpu/mpc8xxx/fsl_ifc.c | 2 +- 3 files changed, 11 insertions(+), 4 deletions(-)README +4
-0@@ -414,6 +414,10 @@ The following options need to be configured: See Freescale App Note 4493 for more information about this erratum. + CONFIG_A003399_NOR_WORKAROUND + Enables a workaround for IFC erratum A003399. It is only + requred during NOR boot. + CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY This is the value to write into CCSR offset 0x18600arch/powerpc/cpu/mpc85xx/cpu_init_early.c +0
-0@@ -25,7 +25,8 @@DECLARE_GLOBAL_DATA_PTR ;
Quoted 7 lines
arch/powerpc/cpu/mpc85xx/cpu_init_early.c line 29
Quoted 4 lines
arch/powerpc/cpu/mpc85xx/cpu_init_early.c +2
-1-#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399 ) && !defined(CONFIG_SYS_RAMBOOT) +#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399 )\ + && defined(CONFIG_A003399_NOR_WORKAROUND )Why would
CONFIG_A003399_NOR_WORKAROUNDbe enabled ifCONFIG_SYS_FSL_ERRATUM_IFC_A003399isn't?
originally i tried the same but it did not work. As P1010RDB.h does not
include config_mpc85xx.h. Only arch/powerpc/cpu/mpc85xx/*.c files
includes both P1010RDB.h and config_mpc85xx.h
Regards,
Prabhakar
PATCH v2 1/5 powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
Quoted 51 lines · Prabhakar Kushwaha
Quoted 41 lines · Scott Wood
Quoted 40 lines · Prabhakar Kushwaha
IFC errata A003399 is valid for IFC NOR boot i.e.if no on-board NOR flash or
no NOR boot, do not compile its workaround.Signed-off-by Prabhakar Kushwaha <[email protected]>---
Based upongit://git.denx.de/u-boot.gitbranch master Changes for v2:
- AddCONFIG_A003399_NOR_WORKAROUNDfor errata workaround
- AddCONFIG_A003399_NOR_WORKAROUNDin READMEREADME | 4 ++++ arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 9 ++++++--- arch/powerpc/cpu/mpc8xxx/fsl_ifc.c | 2 +- 3 files changed, 11 insertions(+), 4 deletions(-)README +4
-0@@ -414,6 +414,10 @@ The following options need to be configured: See Freescale App Note 4493 for more information about this erratum. + CONFIG_A003399_NOR_WORKAROUND + Enables a workaround for IFC erratum A003399. It is only + requred during NOR boot. + CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY This is the value to write into CCSR offset 0x18600arch/powerpc/cpu/mpc85xx/cpu_init_early.c +0
-0@@ -25,7 +25,8 @@DECLARE_GLOBAL_DATA_PTR ;Quoted 7 lines
arch/powerpc/cpu/mpc85xx/cpu_init_early.c line 29
Quoted 4 lines
arch/powerpc/cpu/mpc85xx/cpu_init_early.c +2
-1-#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399 ) && !defined(CONFIG_SYS_RAMBOOT) +#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399 )\ + && defined(CONFIG_A003399_NOR_WORKAROUND )Why would
CONFIG_A003399_NOR_WORKAROUNDbe enabled ifCONFIG_SYS_FSL_ERRATUM_IFC_A003399isn't?
Quoted 3 lines
originally i tried the same but it did not work. As
P1010RDB.hdoes
not includeconfig_mpc85xx.h. Onlyarch/powerpc/cpu/mpc85xx/*.c
files includes bothP1010RDB.handconfig_mpc85xx.h
Can you add #include <config.h> in P1010RDB.h near the top, but after the symbols that config_mpc85xx.h depends on (which I think is just CONFIG_P1010)?
-Scott
PATCH v2 1/5 powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
Quoted 52 lines · Scott Wood
Quoted 51 lines · Prabhakar Kushwaha
Quoted 48 lines · Scott Wood
Quoted 37 lines · Prabhakar Kushwaha
IFC errata A003399 is valid for IFC NOR boot i.e.if no on-board NOR flash or
no NOR boot, do not compile its workaround.Signed-off-by Prabhakar Kushwaha <[email protected]>---
Based upongit://git.denx.de/u-boot.gitbranch master Changes for v2:
- AddCONFIG_A003399_NOR_WORKAROUNDfor errata workaround
- AddCONFIG_A003399_NOR_WORKAROUNDin READMEREADME | 4 ++++ arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 9 ++++++--- arch/powerpc/cpu/mpc8xxx/fsl_ifc.c | 2 +- 3 files changed, 11 insertions(+), 4 deletions(-)README +4
-0@@ -414,6 +414,10 @@ The following options need to be configured: See Freescale App Note 4493 for more information about this erratum. + CONFIG_A003399_NOR_WORKAROUND + Enables a workaround for IFC erratum A003399. It is only + requred during NOR boot. + CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY This is the value to write into CCSR offset 0x18600arch/powerpc/cpu/mpc85xx/cpu_init_early.c +0
-0arch/powerpc/cpu/mpc85xx/cpu_init_early.c line 30
Quoted 7 lines
arch/powerpc/cpu/mpc85xx/cpu_init_early.c +2
-1@@ -25,7 +25,8 @@DECLARE_GLOBAL_DATA_PTR ; -#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399 ) && !defined(CONFIG_SYS_RAMBOOT) +#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399 )\ + && defined(CONFIG_A003399_NOR_WORKAROUND )Why would
CONFIG_A003399_NOR_WORKAROUNDbe enabled ifCONFIG_SYS_FSL_ERRATUM_IFC_A003399isn't?
Quoted 7 lines
Quoted 3 lines
originally i tried the same but it did not work. As
P1010RDB.hdoes
not includeconfig_mpc85xx.h. Onlyarch/powerpc/cpu/mpc85xx/*.c
files includes bothP1010RDB.handconfig_mpc85xx.hCan you add #include <
config.h> inP1010RDB.hnear the top, but after the symbols thatconfig_mpc85xx.hdepends on (which I think is justCONFIG_P1010)?
I need to add config_mpc85xx.h here.
#define CONFIG_MPC85xx
#define CONFIG_FSL_IFC /* Enable IFC Support */
#define CONFIG_SYS_HAS_SERDES /* common SERDES init code */
+#include "../../arch/powerpc/include/asm/config_mpc85xx.h"
I tried just after CONFIG_P1010 but it is giving compilation error.
Just to mention, I need to provide relative path in order to compile. I will still suggest to keep original patch, As header file location may change over period of time then config file needs to be updated again.
Regards,
Prabhakar
PATCH v2 1/5 powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
Quoted 60 lines · Prabhakar Kushwaha
Quoted 52 lines · Scott Wood
Quoted 51 lines · Prabhakar Kushwaha
Quoted 48 lines · Scott Wood
Quoted 37 lines · Prabhakar Kushwaha
IFC errata A003399 is valid for IFC NOR boot i.e.if no on-board NOR flash or
no NOR boot, do not compile its workaround.Signed-off-by Prabhakar Kushwaha <[email protected]>---
Based upongit://git.denx.de/u-boot.gitbranch master Changes for v2:
- AddCONFIG_A003399_NOR_WORKAROUNDfor errata workaround
- AddCONFIG_A003399_NOR_WORKAROUNDin READMEREADME | 4 ++++ arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 9 ++++++--- arch/powerpc/cpu/mpc8xxx/fsl_ifc.c | 2 +- 3 files changed, 11 insertions(+), 4 deletions(-)README +4
-0@@ -414,6 +414,10 @@ The following options need to be configured: See Freescale App Note 4493 for more information about this erratum. + CONFIG_A003399_NOR_WORKAROUND + Enables a workaround for IFC erratum A003399. It is only + requred during NOR boot. + CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY This is the value to write into CCSR offset 0x18600arch/powerpc/cpu/mpc85xx/cpu_init_early.c +0
-0arch/powerpc/cpu/mpc85xx/cpu_init_early.c line 30
Quoted 7 lines
arch/powerpc/cpu/mpc85xx/cpu_init_early.c +2
-1@@ -25,7 +25,8 @@DECLARE_GLOBAL_DATA_PTR ; -#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399 ) && !defined(CONFIG_SYS_RAMBOOT) +#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399 )\ + && defined(CONFIG_A003399_NOR_WORKAROUND )Why would
CONFIG_A003399_NOR_WORKAROUNDbe enabled ifCONFIG_SYS_FSL_ERRATUM_IFC_A003399isn't?Quoted 7 lines
Quoted 3 lines
originally i tried the same but it did not work. As
P1010RDB.hdoes
not includeconfig_mpc85xx.h. Onlyarch/powerpc/cpu/mpc85xx/*.c
files includes bothP1010RDB.handconfig_mpc85xx.hCan you add #include <
config.h> inP1010RDB.hnear the top, but after the symbols thatconfig_mpc85xx.hdepends on (which I think is justCONFIG_P1010)?
Quoted 8 lines
I need to add
config_mpc85xx.hhere.#define
CONFIG_MPC85xx
#defineCONFIG_FSL_IFC/* Enable IFC Support */
#defineCONFIG_SYS_HAS_SERDES/* common SERDES init code */
+#include "../../arch/powerpc/include/asm/config_mpc85xx.h"I tried just after
CONFIG_P1010but it is giving compilation error.
What error?
Quoted 1 line
Just to mention, I need to provide relative path in order to compile.
What specifically did you try and what error did it produce?
Quoted 3 lines
I will still suggest to keep original patch, As header file location may change over period of time then config file needs to be updated again.
No, this has been a repeated problem (not having access to config_mpc85xx.h in the board config file) and I'd like to see it fixed.
-Scott
PATCH v2 1/5 powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
Quoted 63 lines · Scott Wood
Quoted 62 lines · Prabhakar Kushwaha
Quoted 52 lines · Scott Wood
Quoted 51 lines · Prabhakar Kushwaha
Quoted 48 lines · Scott Wood
Quoted 37 lines · Prabhakar Kushwaha
IFC errata A003399 is valid for IFC NOR boot i.e.if no on-board NOR flash or
no NOR boot, do not compile its workaround.Signed-off-by Prabhakar Kushwaha <[email protected]>---
Based upongit://git.denx.de/u-boot.gitbranch master Changes for v2:
- AddCONFIG_A003399_NOR_WORKAROUNDfor errata workaround
- AddCONFIG_A003399_NOR_WORKAROUNDin READMEREADME | 4 ++++ arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 9 ++++++--- arch/powerpc/cpu/mpc8xxx/fsl_ifc.c | 2 +- 3 files changed, 11 insertions(+), 4 deletions(-)README +4
-0@@ -414,6 +414,10 @@ The following options need to be configured: See Freescale App Note 4493 for more information about this erratum. + CONFIG_A003399_NOR_WORKAROUND + Enables a workaround for IFC erratum A003399. It is only + requred during NOR boot. + CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY This is the value to write into CCSR offset 0x18600arch/powerpc/cpu/mpc85xx/cpu_init_early.c +0
-0arch/powerpc/cpu/mpc85xx/cpu_init_early.c line 30
Quoted 7 lines
arch/powerpc/cpu/mpc85xx/cpu_init_early.c +2
-1@@ -25,7 +25,8 @@DECLARE_GLOBAL_DATA_PTR ; -#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399 ) && !defined(CONFIG_SYS_RAMBOOT) +#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399 )\ + && defined(CONFIG_A003399_NOR_WORKAROUND )Why would
CONFIG_A003399_NOR_WORKAROUNDbe enabled ifCONFIG_SYS_FSL_ERRATUM_IFC_A003399isn't?Quoted 7 lines
Quoted 3 lines
originally i tried the same but it did not work. As
P1010RDB.hdoes
not includeconfig_mpc85xx.h. Onlyarch/powerpc/cpu/mpc85xx/*.c
files includes bothP1010RDB.handconfig_mpc85xx.hCan you add #include <
config.h> inP1010RDB.hnear the top, but after the symbols thatconfig_mpc85xx.hdepends on (which I think is justCONFIG_P1010)?I need to add
config_mpc85xx.hhere.
Quoted 8 lines
Quoted 6 lines
#define
CONFIG_MPC85xx
#defineCONFIG_FSL_IFC/* Enable IFC Support */
#defineCONFIG_SYS_HAS_SERDES/* common SERDES init code */
+#include "../../arch/powerpc/include/asm/config_mpc85xx.h"I tried just after
CONFIG_P1010but it is giving compilation error.What error?
make[1]: Entering directory
`/home/b32579/Workspace/MERGE/OPENSRC/U-BOOT/u-boot' /opt/freescale/usr/local/gcc-4.5.55-eglibc-2.11.55/powerpc-linux-gnu/bin/powerpc-linux-gnu-gcc -DDO_DEPS_ONLY \
-g -Os -fpic -mrelocatable -ffunction-sections
-fdata-sections -meabi -D__KERNEL__ -DCONFIG_SYS_TEXT_BASE=0x11000000 -I/home/b32579/Workspace/MERGE/OPENSRC/U-BOOT/u-boot/include
-fno-builtin -ffreestanding -nostdinc -isystem /opt/freescale/usr/local/gcc-4.5.55-eglibc-2.11.55/powerpc-linux-gnu/lib/gcc/powerpc-linux-gnu/4.5.1/include -pipe -DCONFIG_PPC -D__powerpc__ -ffixed-r2 -Wa,-me500 -msoft-float
-mno-string -mno-spe -Wall -Wstrict-prototypes -fno-stack-protector
-Wno-format-nonliteral -Wno-format-security \
-o lib/asm-offsets.s lib/asm-offsets.c -c -S
In file included from /home/b32579/Workspace/MERGE/OPENSRC/U-BOOT/u-boot/include/common.h:174:0,
from lib/asm-offsets.c:18:
/home/b32579/Workspace/MERGE/OPENSRC/U-BOOT/u-boot/include/asm/global_data.h:98:21:
error: 'CONFIG_SYS_NUM_TLBCAMS' undeclared here (not in a function) make[1]: *** [lib/asm-offsets.s] Error 1
because of these defines in config_mpc85xx.h
#if defined(CONFIG_E500MC)
#define CONFIG_SYS_NUM_TLBCAMS 64
#elif defined(CONFIG_E500)
#define CONFIG_SYS_NUM_TLBCAMS 16
#endif
Quoted 3 lines
Quoted 1 line
Just to mention, I need to provide relative path in order to compile.
What specifically did you try and what error did it produce?
I did not try anything.
I was just doubting on having relative path.
is it acceptable or not? As we are moving from dynamic header inclusions to more fixed inclusion.
Quoted 7 lines
Quoted 4 lines
I will still suggest to keep original patch, As header file location may change over period of time then config file needs to be updated again.
No, this has been a repeated problem (not having access to
config_mpc85xx.hin the board config file) and I'd like to see it fixed
oh.. I was not aware of this point.
Regards,
Prabhakar
PATCH v2 1/5 powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399
Quoted 27 lines · Prabhakar Kushwaha
Quoted 4 lines · Scott Wood
Quoted 1 line · Prabhakar Kushwaha
I tried just after
CONFIG_P1010but it is giving compilation error.What error?
make[1]: Entering directory `/home/b32579/Workspace/MERGE/OPENSRC/U-BOOT/u-boot'
/opt/freescale/usr/local/gcc-4.5.55-eglibc-2.11.55/powerpc-linux-gnu/bin/powerpc-linux-gnu-gcc(quoted diff) +0
-4-DDO_DEPS_ONLY \ -g -Os -fpic -mrelocatable -ffunction-sections -fdata-sections -meabi -D__KERNEL__ -DCONFIG_SYS_TEXT_BASE=0x11000000 -I/home/b32579/Workspace/MERGE/OPENSRC/U-BOOT/u-boot/include -fno-builtin -ffreestanding -nostdinc -isystem
/opt/freescale/usr/local/gcc-4.5.55-eglibc-2.11.55/powerpc-linux-gnu/lib/gcc/powerpc-linux-gnu/4.5.1/include(quoted diff) +0
-3-pipe -DCONFIG_PPC -D__powerpc__ -ffixed-r2 -Wa,-me500 -msoft-float -mno-string -mno-spe -Wall -Wstrict-prototypes -fno-stack-protector -Wno-format-nonliteral -Wno-format-security \ -o lib/asm-offsets.s lib/asm-offsets.c -c -SIn file included from
/home/b32579/Workspace/MERGE/OPENSRC/U-BOOT/u-boot/include/common.h:174:0,from lib/asm-offsets.c:18:
/home/b32579/Workspace/MERGE/OPENSRC/U-BOOT/u-boot/include/asm/global_data.h:98:21:
error: 'CONFIG_SYS_NUM_TLBCAMS' undeclared here (not in a function) make[1]: *** [lib/asm-offsets.s] Error 1
Quoted 6 lines
because of these defines in
config_mpc85xx.h
#ifdefined(CONFIG_E500MC)
#defineCONFIG_SYS_NUM_TLBCAMS64
#elifdefined(CONFIG_E500)
#defineCONFIG_SYS_NUM_TLBCAMS16
#endif
You also need CONFIG_E500 defined before you include config_mpc85xx.h -- although it might be better to define CONFIG_E500[MC] in config_mpc85xx.h based on the SoC type, and move the CONFIG_SYS_NUM_TLBCAMS setting to the bottom of the file.
Quoted 6 lines
Quoted 4 lines
Quoted 2 lines
Just to mention, I need to provide relative path in order to compile.
What specifically did you try and what error did it produce?
I did not try anything.
If you didn't try a normal include patch and see a failure, why do you say you need to provide a relative path?
#include <asm/config_mpc85xx.h> works for me.
-Scott