Skip to contentSkip to conversation

powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399

PATCH Superseded Prabhakar Kushwaha 2 participants 8 messages Mar 22, 2013 – Apr 10, 2013 PowerPC

v2 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/5 powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399

IFC errata A003399 is valid for IFC NOR boot i.e.if no on-board NOR flash or no NOR boot, do not compile its workaround.

---
Based upon git://git.denx.de/u-boot.git branch master Changes for v2:
- Add CONFIG_A003399_NOR_WORKAROUND for errata workaround
- Add CONFIG_A003399_NOR_WORKAROUND in README

 README                                    |    4 ++++
 arch/powerpc/cpu/mpc85xx/cpu_init_early.c |    9 ++++++---
 arch/powerpc/cpu/mpc8xxx/fsl_ifc.c        |    2 +-
 3 files changed, 11 insertions(+), 4 deletions(-)
README +4 -0
index 7f2506a..c4ad69d 100644
@@ -414,6 +414,10 @@ The following options need to be configured:
 		See Freescale App Note 4493 for more information about
 		this erratum.
 
+		CONFIG_A003399_NOR_WORKAROUND
+		Enables a workaround for IFC erratum A003399. It is only
+		requred during NOR boot.
+
 		CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY
 
 		This is the value to write into CCSR offset 0x18600
arch/powerpc/cpu/mpc85xx/cpu_init_early.c +6 -3
index dacfdd1..3a4bfc5 100644
@@ -25,7 +25,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) && !defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399)\
+	&& defined(CONFIG_A003399_NOR_WORKAROUND)
 void setup_ifc(void)
 {
 	struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR;
@@ -99,7 +100,8 @@ void cpu_init_early_f(void)
 #ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 #endif
-#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) && !defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399)\
+	&& defined(CONFIG_A003399_NOR_WORKAROUND)
 	ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
 	u32  *dst, *src;
 	void (*setup_ifc_sram)(void);
@@ -138,7 +140,8 @@ void cpu_init_early_f(void)
  * Work Around for IFC Erratum A003399, issue will hit only when execution
  * from NOR Flash
  */
-#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) && !defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399)\
+	&& defined(CONFIG_A003399_NOR_WORKAROUND)
 #define SRAM_BASE_ADDR	(0x00000000)
 	/* TLB for SRAM */
 	mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(9);
arch/powerpc/cpu/mpc8xxx/fsl_ifc.c +1 -1
index 56b319f..959a0e2 100644
@@ -43,7 +43,7 @@ void init_early_memctl_regs(void)
 	set_ifc_ftim(IFC_CS0, IFC_FTIM2, CONFIG_SYS_CS0_FTIM2);
 	set_ifc_ftim(IFC_CS0, IFC_FTIM3, CONFIG_SYS_CS0_FTIM3);
 
-#if !defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) || defined(CONFIG_SYS_RAMBOOT)
+#ifndef CONFIG_A003399_NOR_WORKAROUND
 #ifdef CONFIG_SYS_CSPR0_EXT
 	set_ifc_cspr_ext(IFC_CS0, CONFIG_SYS_CSPR0_EXT);
 #endif
Signature · 1 line
1.7.9.5
#1 lore raw

PATCH v2 1/5 powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399

Quoted 37 lines · Prabhakar Kushwaha

IFC errata A003399 is valid for IFC NOR boot i.e.if no on-board NOR flash or
no NOR boot, do not compile its workaround.

---
Based upon git://git.denx.de/u-boot.git branch master Changes for v2:
- Add CONFIG_A003399_NOR_WORKAROUND for errata workaround
- Add CONFIG_A003399_NOR_WORKAROUND in README

 README                                    |    4 ++++
 arch/powerpc/cpu/mpc85xx/cpu_init_early.c |    9 ++++++---
 arch/powerpc/cpu/mpc8xxx/fsl_ifc.c        |    2 +-
 3 files changed, 11 insertions(+), 4 deletions(-)
README +4 -0
index 7f2506a..c4ad69d 100644
@@ -414,6 +414,10 @@ The following options need to be configured:
 		See Freescale App Note 4493 for more information about
 		this erratum.
 
+		CONFIG_A003399_NOR_WORKAROUND
+		Enables a workaround for IFC erratum A003399. It is only
+		requred during NOR boot.
+
 		CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY
 
 		This is the value to write into CCSR offset 0x18600
arch/powerpc/cpu/mpc85xx/cpu_init_early.c +0 -0
index dacfdd1..3a4bfc5 100644

arch/powerpc/cpu/mpc85xx/cpu_init_early.c line 30

Quoted 7 lines
arch/powerpc/cpu/mpc85xx/cpu_init_early.c +2 -1
@@ -25,7 +25,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) &&  
 !defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399)\
+	&& defined(CONFIG_A003399_NOR_WORKAROUND)

Why would CONFIG_A003399_NOR_WORKAROUND be enabled if CONFIG_SYS_FSL_ERRATUM_IFC_A003399 isn't?

-Scott

#2 lore raw

PATCH v2 1/5 powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399

Quoted 41 lines · Scott Wood
Quoted 40 lines · Prabhakar Kushwaha

IFC errata A003399 is valid for IFC NOR boot i.e.if no on-board NOR flash or
no NOR boot, do not compile its workaround.

---
Based upon git://git.denx.de/u-boot.git branch master Changes for v2:
- Add CONFIG_A003399_NOR_WORKAROUND for errata workaround
- Add CONFIG_A003399_NOR_WORKAROUND in README

 README                                    |    4 ++++
 arch/powerpc/cpu/mpc85xx/cpu_init_early.c |    9 ++++++---
 arch/powerpc/cpu/mpc8xxx/fsl_ifc.c        |    2 +-
 3 files changed, 11 insertions(+), 4 deletions(-)
README +4 -0
index 7f2506a..c4ad69d 100644
@@ -414,6 +414,10 @@ The following options need to be configured:
         See Freescale App Note 4493 for more information about
         this erratum.
 
+        CONFIG_A003399_NOR_WORKAROUND
+        Enables a workaround for IFC erratum A003399. It is only
+        requred during NOR boot.
+
         CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY
 
         This is the value to write into CCSR offset 0x18600
arch/powerpc/cpu/mpc85xx/cpu_init_early.c +0 -0
index dacfdd1..3a4bfc5 100644
@@ -25,7 +25,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
Quoted 7 lines

arch/powerpc/cpu/mpc85xx/cpu_init_early.c line 29

Quoted 4 lines
arch/powerpc/cpu/mpc85xx/cpu_init_early.c +2 -1
-#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) && 
 !defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399)\
+    && defined(CONFIG_A003399_NOR_WORKAROUND)

Why would CONFIG_A003399_NOR_WORKAROUND be enabled if CONFIG_SYS_FSL_ERRATUM_IFC_A003399 isn't?

originally i tried the same but it did not work. As P1010RDB.h does not
include config_mpc85xx.h. Only arch/powerpc/cpu/mpc85xx/*.c files
includes both P1010RDB.h and config_mpc85xx.h

Regards,
Prabhakar

#3 lore raw

PATCH v2 1/5 powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399

Quoted 51 lines · Prabhakar Kushwaha
Quoted 41 lines · Scott Wood
Quoted 40 lines · Prabhakar Kushwaha

IFC errata A003399 is valid for IFC NOR boot i.e.if no on-board NOR flash or
no NOR boot, do not compile its workaround.

---
Based upon git://git.denx.de/u-boot.git branch master Changes for v2:
- Add CONFIG_A003399_NOR_WORKAROUND for errata workaround
- Add CONFIG_A003399_NOR_WORKAROUND in README

 README                                    |    4 ++++
 arch/powerpc/cpu/mpc85xx/cpu_init_early.c |    9 ++++++---
 arch/powerpc/cpu/mpc8xxx/fsl_ifc.c        |    2 +-
 3 files changed, 11 insertions(+), 4 deletions(-)
README +4 -0
index 7f2506a..c4ad69d 100644
@@ -414,6 +414,10 @@ The following options need to be configured:
         See Freescale App Note 4493 for more information about
         this erratum.
 
+        CONFIG_A003399_NOR_WORKAROUND
+        Enables a workaround for IFC erratum A003399. It is only
+        requred during NOR boot.
+
         CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY
 
         This is the value to write into CCSR offset 0x18600
arch/powerpc/cpu/mpc85xx/cpu_init_early.c +0 -0
index dacfdd1..3a4bfc5 100644
@@ -25,7 +25,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
Quoted 7 lines

arch/powerpc/cpu/mpc85xx/cpu_init_early.c line 29

Quoted 4 lines
arch/powerpc/cpu/mpc85xx/cpu_init_early.c +2 -1
-#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) &&  
 !defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399)\
+    && defined(CONFIG_A003399_NOR_WORKAROUND)

Why would CONFIG_A003399_NOR_WORKAROUND be enabled if CONFIG_SYS_FSL_ERRATUM_IFC_A003399 isn't?

Quoted 3 lines

originally i tried the same but it did not work. As P1010RDB.h does
not include config_mpc85xx.h. Only arch/powerpc/cpu/mpc85xx/*.c
files includes both P1010RDB.h and config_mpc85xx.h

Can you add #include <config.h> in P1010RDB.h near the top, but after the symbols that config_mpc85xx.h depends on (which I think is just CONFIG_P1010)?

-Scott

#4 lore raw

PATCH v2 1/5 powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399

Quoted 52 lines · Scott Wood
Quoted 51 lines · Prabhakar Kushwaha
Quoted 48 lines · Scott Wood
Quoted 37 lines · Prabhakar Kushwaha

IFC errata A003399 is valid for IFC NOR boot i.e.if no on-board NOR flash or
no NOR boot, do not compile its workaround.

---
Based upon git://git.denx.de/u-boot.git branch master Changes for v2:
- Add CONFIG_A003399_NOR_WORKAROUND for errata workaround
- Add CONFIG_A003399_NOR_WORKAROUND in README

 README                                    |    4 ++++
 arch/powerpc/cpu/mpc85xx/cpu_init_early.c |    9 ++++++---
 arch/powerpc/cpu/mpc8xxx/fsl_ifc.c        |    2 +-
 3 files changed, 11 insertions(+), 4 deletions(-)
README +4 -0
index 7f2506a..c4ad69d 100644
@@ -414,6 +414,10 @@ The following options need to be configured:
         See Freescale App Note 4493 for more information about
         this erratum.
 
+        CONFIG_A003399_NOR_WORKAROUND
+        Enables a workaround for IFC erratum A003399. It is only
+        requred during NOR boot.
+
         CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY
 
         This is the value to write into CCSR offset 0x18600
arch/powerpc/cpu/mpc85xx/cpu_init_early.c +0 -0
index dacfdd1..3a4bfc5 100644

arch/powerpc/cpu/mpc85xx/cpu_init_early.c line 30

Quoted 7 lines
arch/powerpc/cpu/mpc85xx/cpu_init_early.c +2 -1
@@ -25,7 +25,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) && 
 !defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399)\
+    && defined(CONFIG_A003399_NOR_WORKAROUND)

Why would CONFIG_A003399_NOR_WORKAROUND be enabled if CONFIG_SYS_FSL_ERRATUM_IFC_A003399 isn't?

Quoted 7 lines
Quoted 3 lines

originally i tried the same but it did not work. As P1010RDB.h does
not include config_mpc85xx.h. Only arch/powerpc/cpu/mpc85xx/*.c
files includes both P1010RDB.h and config_mpc85xx.h

Can you add #include <config.h> in P1010RDB.h near the top, but after the symbols that config_mpc85xx.h depends on (which I think is just CONFIG_P1010)?

I need to add config_mpc85xx.h here.

#define CONFIG_MPC85xx
#define CONFIG_FSL_IFC /* Enable IFC Support */
#define CONFIG_SYS_HAS_SERDES /* common SERDES init code */
+#include "../../arch/powerpc/include/asm/config_mpc85xx.h"

I tried just after CONFIG_P1010 but it is giving compilation error.

Just to mention, I need to provide relative path in order to compile. I will still suggest to keep original patch, As header file location may change over period of time then config file needs to be updated again.

Regards,
Prabhakar

#5 lore raw

PATCH v2 1/5 powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399

Quoted 60 lines · Prabhakar Kushwaha
Quoted 52 lines · Scott Wood
Quoted 51 lines · Prabhakar Kushwaha
Quoted 48 lines · Scott Wood
Quoted 37 lines · Prabhakar Kushwaha

IFC errata A003399 is valid for IFC NOR boot i.e.if no on-board NOR flash or
no NOR boot, do not compile its workaround.

---
Based upon git://git.denx.de/u-boot.git branch master Changes for v2:
- Add CONFIG_A003399_NOR_WORKAROUND for errata workaround
- Add CONFIG_A003399_NOR_WORKAROUND in README

 README                                    |    4 ++++
 arch/powerpc/cpu/mpc85xx/cpu_init_early.c |    9 ++++++---
 arch/powerpc/cpu/mpc8xxx/fsl_ifc.c        |    2 +-
 3 files changed, 11 insertions(+), 4 deletions(-)
README +4 -0
index 7f2506a..c4ad69d 100644
@@ -414,6 +414,10 @@ The following options need to be configured:
         See Freescale App Note 4493 for more information about
         this erratum.
 
+        CONFIG_A003399_NOR_WORKAROUND
+        Enables a workaround for IFC erratum A003399. It is only
+        requred during NOR boot.
+
         CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY
 
         This is the value to write into CCSR offset 0x18600
arch/powerpc/cpu/mpc85xx/cpu_init_early.c +0 -0
index dacfdd1..3a4bfc5 100644

arch/powerpc/cpu/mpc85xx/cpu_init_early.c line 30

Quoted 7 lines
arch/powerpc/cpu/mpc85xx/cpu_init_early.c +2 -1
@@ -25,7 +25,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) &&  
 !defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399)\
+    && defined(CONFIG_A003399_NOR_WORKAROUND)

Why would CONFIG_A003399_NOR_WORKAROUND be enabled if CONFIG_SYS_FSL_ERRATUM_IFC_A003399 isn't?

Quoted 7 lines
Quoted 3 lines

originally i tried the same but it did not work. As P1010RDB.h does
not include config_mpc85xx.h. Only arch/powerpc/cpu/mpc85xx/*.c
files includes both P1010RDB.h and config_mpc85xx.h

Can you add #include <config.h> in P1010RDB.h near the top, but after the symbols that config_mpc85xx.h depends on (which I think is just CONFIG_P1010)?

Quoted 8 lines

I need to add config_mpc85xx.h here.

#define CONFIG_MPC85xx
#define CONFIG_FSL_IFC /* Enable IFC Support */
#define CONFIG_SYS_HAS_SERDES /* common SERDES init code */
+#include "../../arch/powerpc/include/asm/config_mpc85xx.h"

I tried just after CONFIG_P1010 but it is giving compilation error.

What error?

Quoted 1 line

Just to mention, I need to provide relative path in order to compile.

What specifically did you try and what error did it produce?

Quoted 3 lines

I will still suggest to keep original patch, As header file location may change over period of time then config file needs to be updated again.

No, this has been a repeated problem (not having access to config_mpc85xx.h in the board config file) and I'd like to see it fixed.

-Scott

#6 lore raw

PATCH v2 1/5 powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399

Quoted 63 lines · Scott Wood
Quoted 62 lines · Prabhakar Kushwaha
Quoted 52 lines · Scott Wood
Quoted 51 lines · Prabhakar Kushwaha
Quoted 48 lines · Scott Wood
Quoted 37 lines · Prabhakar Kushwaha

IFC errata A003399 is valid for IFC NOR boot i.e.if no on-board NOR flash or
no NOR boot, do not compile its workaround.

---
Based upon git://git.denx.de/u-boot.git branch master Changes for v2:
- Add CONFIG_A003399_NOR_WORKAROUND for errata workaround
- Add CONFIG_A003399_NOR_WORKAROUND in README

 README                                    |    4 ++++
 arch/powerpc/cpu/mpc85xx/cpu_init_early.c |    9 ++++++---
 arch/powerpc/cpu/mpc8xxx/fsl_ifc.c        |    2 +-
 3 files changed, 11 insertions(+), 4 deletions(-)
README +4 -0
index 7f2506a..c4ad69d 100644
@@ -414,6 +414,10 @@ The following options need to be configured:
         See Freescale App Note 4493 for more information about
         this erratum.
 
+        CONFIG_A003399_NOR_WORKAROUND
+        Enables a workaround for IFC erratum A003399. It is only
+        requred during NOR boot.
+
         CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY
 
         This is the value to write into CCSR offset 0x18600
arch/powerpc/cpu/mpc85xx/cpu_init_early.c +0 -0
index dacfdd1..3a4bfc5 100644

arch/powerpc/cpu/mpc85xx/cpu_init_early.c line 30

Quoted 7 lines
arch/powerpc/cpu/mpc85xx/cpu_init_early.c +2 -1
@@ -25,7 +25,8 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399) && 
 !defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_SYS_FSL_ERRATUM_IFC_A003399)\
+    && defined(CONFIG_A003399_NOR_WORKAROUND)

Why would CONFIG_A003399_NOR_WORKAROUND be enabled if CONFIG_SYS_FSL_ERRATUM_IFC_A003399 isn't?

Quoted 7 lines
Quoted 3 lines

originally i tried the same but it did not work. As P1010RDB.h does
not include config_mpc85xx.h. Only arch/powerpc/cpu/mpc85xx/*.c
files includes both P1010RDB.h and config_mpc85xx.h

Can you add #include <config.h> in P1010RDB.h near the top, but after the symbols that config_mpc85xx.h depends on (which I think is just CONFIG_P1010)?

I need to add config_mpc85xx.h here.

Quoted 8 lines
Quoted 6 lines

#define CONFIG_MPC85xx
#define CONFIG_FSL_IFC /* Enable IFC Support */
#define CONFIG_SYS_HAS_SERDES /* common SERDES init code */
+#include "../../arch/powerpc/include/asm/config_mpc85xx.h"

I tried just after CONFIG_P1010 but it is giving compilation error.

What error?

make[1]: Entering directory
`/home/b32579/Workspace/MERGE/OPENSRC/U-BOOT/u-boot' /opt/freescale/usr/local/gcc-4.5.55-eglibc-2.11.55/powerpc-linux-gnu/bin/powerpc-linux-gnu-gcc -DDO_DEPS_ONLY \
-g -Os -fpic -mrelocatable -ffunction-sections
-fdata-sections -meabi -D__KERNEL__ -DCONFIG_SYS_TEXT_BASE=0x11000000 -I/home/b32579/Workspace/MERGE/OPENSRC/U-BOOT/u-boot/include
-fno-builtin -ffreestanding -nostdinc -isystem /opt/freescale/usr/local/gcc-4.5.55-eglibc-2.11.55/powerpc-linux-gnu/lib/gcc/powerpc-linux-gnu/4.5.1/include -pipe -DCONFIG_PPC -D__powerpc__ -ffixed-r2 -Wa,-me500 -msoft-float
-mno-string -mno-spe -Wall -Wstrict-prototypes -fno-stack-protector
-Wno-format-nonliteral -Wno-format-security \
-o lib/asm-offsets.s lib/asm-offsets.c -c -S
In file included from /home/b32579/Workspace/MERGE/OPENSRC/U-BOOT/u-boot/include/common.h:174:0,

                  from lib/asm-offsets.c:18:

/home/b32579/Workspace/MERGE/OPENSRC/U-BOOT/u-boot/include/asm/global_data.h:98:21:
error: 'CONFIG_SYS_NUM_TLBCAMS' undeclared here (not in a function) make[1]: *** [lib/asm-offsets.s] Error 1

because of these defines in config_mpc85xx.h
#if defined(CONFIG_E500MC)
#define CONFIG_SYS_NUM_TLBCAMS 64
#elif defined(CONFIG_E500)
#define CONFIG_SYS_NUM_TLBCAMS 16
#endif

Quoted 3 lines
Quoted 1 line

Just to mention, I need to provide relative path in order to compile.

What specifically did you try and what error did it produce?

I did not try anything.
I was just doubting on having relative path.
is it acceptable or not? As we are moving from dynamic header inclusions to more fixed inclusion.

Quoted 7 lines
Quoted 4 lines

I will still suggest to keep original patch, As header file location may change over period of time then config file needs to be updated again.

No, this has been a repeated problem (not having access to config_mpc85xx.h in the board config file) and I'd like to see it fixed

oh.. I was not aware of this point.

Regards,
Prabhakar

#7 lore raw

PATCH v2 1/5 powerpc/mpc85xx:No NOR boot, do not compile IFC errata A003399

Quoted 27 lines · Prabhakar Kushwaha
Quoted 4 lines · Scott Wood
Quoted 1 line · Prabhakar Kushwaha

I tried just after CONFIG_P1010 but it is giving compilation error.

What error?

make[1]: Entering directory `/home/b32579/Workspace/MERGE/OPENSRC/U-BOOT/u-boot' /opt/freescale/usr/local/gcc-4.5.55-eglibc-2.11.55/powerpc-linux-gnu/bin/powerpc-linux-gnu-gcc

(quoted diff) +0 -4
-DDO_DEPS_ONLY \
        -g  -Os   -fpic -mrelocatable -ffunction-sections  
-fdata-sections -meabi -D__KERNEL__ -DCONFIG_SYS_TEXT_BASE=0x11000000  
-I/home/b32579/Workspace/MERGE/OPENSRC/U-BOOT/u-boot/include  
-fno-builtin -ffreestanding -nostdinc -isystem  

/opt/freescale/usr/local/gcc-4.5.55-eglibc-2.11.55/powerpc-linux-gnu/lib/gcc/powerpc-linux-gnu/4.5.1/include

(quoted diff) +0 -3
-pipe  -DCONFIG_PPC -D__powerpc__ -ffixed-r2 -Wa,-me500 -msoft-float  
-mno-string  -mno-spe -Wall -Wstrict-prototypes -fno-stack-protector  
-Wno-format-nonliteral -Wno-format-security    \
        -o lib/asm-offsets.s lib/asm-offsets.c -c -S

In file included from /home/b32579/Workspace/MERGE/OPENSRC/U-BOOT/u-boot/include/common.h:174:0,

                 from lib/asm-offsets.c:18:

/home/b32579/Workspace/MERGE/OPENSRC/U-BOOT/u-boot/include/asm/global_data.h:98:21:
error: 'CONFIG_SYS_NUM_TLBCAMS' undeclared here (not in a function) make[1]: *** [lib/asm-offsets.s] Error 1

Quoted 6 lines

because of these defines in config_mpc85xx.h
#if defined(CONFIG_E500MC)
#define CONFIG_SYS_NUM_TLBCAMS 64
#elif defined(CONFIG_E500)
#define CONFIG_SYS_NUM_TLBCAMS 16
#endif

You also need CONFIG_E500 defined before you include config_mpc85xx.h -- although it might be better to define CONFIG_E500[MC] in config_mpc85xx.h based on the SoC type, and move the CONFIG_SYS_NUM_TLBCAMS setting to the bottom of the file.

Quoted 6 lines
Quoted 4 lines
Quoted 2 lines

Just to mention, I need to provide relative path in order to compile.

What specifically did you try and what error did it produce?

I did not try anything.

If you didn't try a normal include patch and see a failure, why do you say you need to provide a relative path?

#include <asm/config_mpc85xx.h> works for me.

-Scott