Skip to contentSkip to conversation

Add initial support for AQUILA-CYGNUS

PATCH New Enric Balletbo i Serra 2 participants 8 messages Apr 3, 2013 – Apr 4, 2013 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

cover Add initial support for AQUILA-CYGNUS

From: Enric Balletbo i Serra <[email protected]>

IGEP COM AQUILA and CYGNUS are two computer-on-module based on AM3354 and AM3352 processors. Both use SODIMM from factor and are designed for industrial range purpose.

Enric Balletbo i Serra (2):
Add DDR3 support for IGEP COM AQUILA/CYGNUS.
ARM: Add support for IGEP COM AQUILA/CYGNUS

 MAINTAINERS                                 |    1 +
 arch/arm/include/asm/arch-am33xx/ddr_defs.h |   17 ++
 board/isee/igep0033/Makefile                |   46 ++++
 board/isee/igep0033/board.c                 |  232 +++++++++++++++++++++
 board/isee/igep0033/board.h                 |   27 +++
 board/isee/igep0033/mux.c                   |   89 ++++++++
 boards.cfg                                  |    1 +
 include/configs/igep0033.h                  |  300 +++++++++++++++++++++++++++
 8 files changed, 713 insertions(+)
 create mode 100644 board/isee/igep0033/Makefile
 create mode 100644 board/isee/igep0033/board.c
 create mode 100644 board/isee/igep0033/board.h
 create mode 100644 board/isee/igep0033/mux.c
 create mode 100644 include/configs/igep0033.h
Signature · 1 line
1.7.10.4
#1 lore raw

PATCH 1/2 Add DDR3 support for IGEP COM AQUILA/CYGNUS.

From: Enric Balletbo i Serra <[email protected]>

These boards uses Samsung K4B2G1646E-BIH9 a 2Gb E-die DDR3 SDRAM.

---
 arch/arm/include/asm/arch-am33xx/ddr_defs.h |   17 +++++++++++++++++
 1 file changed, 17 insertions(+)
arch/arm/include/asm/arch-am33xx/ddr_defs.h +17 -0
index 260cc34..4ebc557 100644
@@ -117,6 +117,23 @@
 #define MT41J512M8RH125_PHY_WR_DATA		0x74
 #define MT41J512M8RH125_IOCTRL_VALUE		0x18B
 
+/* Samsung K4B2G1646E-BIH9 */
+#define K4B2G1646EBIH9_EMIF_READ_LATENCY	0x06
+#define K4B2G1646EBIH9_EMIF_TIM1		0x0888A39B
+#define K4B2G1646EBIH9_EMIF_TIM2		0x2A04011A
+#define K4B2G1646EBIH9_EMIF_TIM3		0x501F820F
+#define K4B2G1646EBIH9_EMIF_SDCFG		0x61C24AB2
+#define K4B2G1646EBIH9_EMIF_SDREF		0x0000093B
+#define K4B2G1646EBIH9_ZQ_CFG			0x50074BE4
+#define K4B2G1646EBIH9_DLL_LOCK_DIFF		0x1
+#define K4B2G1646EBIH9_RATIO			0x40
+#define K4B2G1646EBIH9_INVERT_CLKOUT		0x1
+#define K4B2G1646EBIH9_RD_DQS			0x3B
+#define K4B2G1646EBIH9_WR_DQS			0x85
+#define K4B2G1646EBIH9_PHY_FIFO_WE		0x100
+#define K4B2G1646EBIH9_PHY_WR_DATA		0xC1
+#define K4B2G1646EBIH9_IOCTRL_VALUE		0x18B
+
 /**
  * Configure DMM
  */
Signature · 1 line
1.7.10.4
#2 lore raw

PATCH 2/2 ARM: Add support for IGEP COM AQUILA/CYGNUS

In reply to Enric Balletbo i Serra

From: Enric Balletbo i Serra <[email protected]>

The IGEP COM AQUILA and CYGNUS are industrial processors modules with following highlights:

o AM3352/AM3354 Texas Instruments processor
o Cortex-A8 ARM CPU
o 3.3 volts Inputs / Outputs use industrial
o 256 MB DDR3 SDRAM / 128 Megabytes FLASH
o MicroSD card reader on-board
o Ethernet controller on-board
o JTAG debug connector available
o Designed for industrial range purposes

---
 MAINTAINERS                  |    1 +
 board/isee/igep0033/Makefile |   46 +++++++
 board/isee/igep0033/board.c  |  232 ++++++++++++++++++++++++++++++++
 board/isee/igep0033/board.h  |   27 ++++
 board/isee/igep0033/mux.c    |   89 +++++++++++++
 boards.cfg                   |    1 +
 include/configs/igep0033.h   |  300 ++++++++++++++++++++++++++++++++++++++++++
 7 files changed, 696 insertions(+)
 create mode 100644 board/isee/igep0033/Makefile
 create mode 100644 board/isee/igep0033/board.c
 create mode 100644 board/isee/igep0033/board.h
 create mode 100644 board/isee/igep0033/mux.c
 create mode 100644 include/configs/igep0033.h
MAINTAINERS +1 -0
index 1614b91..6cfcf83 100644
@@ -607,6 +607,7 @@ Enric Balletbo i Serra <[email protected]>
 	igep0020	ARM ARMV7 (OMAP3xx SoC)
 	igep0030	ARM ARMV7 (OMAP3xx SoC)
 	igep0032	ARM ARMV7 (OMAP3xx SoC)
+	igep0033	ARM ARMV7 (AM33xx Soc)
 
 Eric Benard <[email protected]>
 
board/isee/igep0033/Makefile new file +46 -0

46 lines not on this page · raw message

board/isee/igep0033/board.c new file +232 -0

232 lines not on this page · raw message

board/isee/igep0033/board.h new file +27 -0
new file mode 100644
index 0000000..37988e0
@@ -0,0 +1,27 @@
+/*
+ * IGEP COM AQUILA/CYGNUS boards information header
+ *
+ * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * We must be able to enable uart0, for initial output. We then have a
+ * main pinmux function that can be overridden to enable all other pinmux that
+ * is required on the board.
+ */
+void enable_uart0_pin_mux(void);
+void enable_board_pin_mux(void);
+#endif
board/isee/igep0033/mux.c new file +89 -0

89 lines not on this page · raw message

boards.cfg +1 -0
index 5fc70be..faf5614 100644
@@ -273,6 +273,7 @@ igep0020_nand                arm         armv7       igep00x0            isee
 igep0030                     arm         armv7       igep00x0            isee           omap3		igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND
 igep0030_nand                arm         armv7       igep00x0            isee           omap3		igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND
 igep0032                     arm         armv7       igep00x0            isee           omap3		igep00x0:MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND
+igep0033                     arm         armv7       igep0033            isee           am33xx
 am3517_evm                   arm         armv7       am3517evm           logicpd        omap3
 mt_ventoux                   arm         armv7       mt_ventoux          teejet         omap3
 omap3_zoom1                  arm         armv7       zoom1               logicpd        omap3
include/configs/igep0033.h new file +300 -0

300 lines not on this page · raw message

Signature · 1 line
1.7.10.4
#3 lore raw

PATCH 2/2 ARM: Add support for IGEP COM AQUILA/CYGNUS

Quoted 14 lines · Enric Balletbo i Serra

From: Enric Balletbo i Serra <[email protected]>

The IGEP COM AQUILA and CYGNUS are industrial processors modules with following highlights:

o AM3352/AM3354 Texas Instruments processor
o Cortex-A8 ARM CPU
o 3.3 volts Inputs / Outputs use industrial
o 256 MB DDR3 SDRAM / 128 Megabytes FLASH
o MicroSD card reader on-board
o Ethernet controller on-board
o JTAG debug connector available
o Designed for industrial range purposes

Quoted 1 line

In general, yay. But some specific comments that I know you inherited:

[snip]

include/configs/igep0033.h line 47

Quoted 8 lines
include/configs/igep0033.h new file +8 -0
+/* Display cpuinfo */
+#define CONFIG_DISPLAY_CPUINFO
+/* Add libfdt-based support */
+#define CONFIG_OF_LIBFDT
+/* Enable passing of ATAGs */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG

Do you really have to support ATAGS and FDT? Just confirming.

include/configs/igep0033.h line 59

Quoted 11 lines
include/configs/igep0033.h new file +11 -0
+/* Commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC

With CONFIG_CMD_FS_GENERIC and CMD_EXT4 do you really need CMD_EXT2 set?

[snip]

include/configs/igep0033.h line 77

Quoted 9 lines
include/configs/igep0033.h new file +9 -0
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"loadaddr=0x80200000\0" \
+	"fdtaddr=0x80F80000\0" \
+	"fdt_high=0xffffffff\0" \
+	"rdaddr=0x81000000\0" \
+	"bootfile=/boot/uImage\0" \
+	"fdtfile=\0" \

You're setting the config options to get an easy run-time way to set fdtfile but not providing a script command to set it nor a C function. If you don't need run-time detection, just set fdtfile :)

include/configs/igep0033.h line 144

Quoted 7 lines
include/configs/igep0033.h new file +7 -0
+/*
+ * memtest works on 8 MB in DRAM after skipping 32MB from
+ * start addr of ram disk
+ */
+#define CONFIG_SYS_MEMTEST_START	(PHYS_DRAM_1 + (64 * 1024 * 1024))
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START \
+					+ (8 * 1024 * 1024))

The comment is wrong, and you can do any of:
- Opt-out of mtest (and see Wolfgang's readme on why that's probably a good idea)
- Correct this to be all of RAM, minus a bit for a reasonably-sized U-Boot to be running in.

[snip]

include/configs/igep0033.h line 219

Quoted 4 lines
include/configs/igep0033.h new file +4 -0
+#define MTDIDS_DEFAULT			"nand0=nand"
+#define MTDPARTS_DEFAULT		"mtdparts=nand:512k(SPL),"\
+					"1920k(U-Boot),128k(U-Boot Env),"\
+					"5m(Kernel),-(File System)"

Setting aside such a large space for U-Boot is something else you inherited, do you want to re-evaluate this or too late?

include/configs/igep0033.h line 248

Quoted 3 lines
include/configs/igep0033.h new file +3 -0
+#define CONFIG_SPL_NET_SUPPORT
+#define CONFIG_SPL_NET_VCI_STRING	"AM335x U-Boot SPL"
+#define CONFIG_SPL_ETH_SUPPORT

Keeping in mind the errata involved, does your board support CPSW SPL without needed the erratad-out mode?

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130403/e4bccc70/attachment.pgp>
#4 lore raw

PATCH 2/2 ARM: Add support for IGEP COM AQUILA/CYGNUS

Hi Tom,

Thanks for your comments.

2013/4/4 Tom Rini <[email protected]>

Quoted 21 lines · Enric Balletbo i Serra
Quoted 15 lines

From: Enric Balletbo i Serra <[email protected]>

The IGEP COM AQUILA and CYGNUS are industrial processors modules with following highlights:

o AM3352/AM3354 Texas Instruments processor
o Cortex-A8 ARM CPU
o 3.3 volts Inputs / Outputs use industrial
o 256 MB DDR3 SDRAM / 128 Megabytes FLASH
o MicroSD card reader on-board
o Ethernet controller on-board
o JTAG debug connector available
o Designed for industrial range purposes

Quoted 1 line

In general, yay. But some specific comments that I know you inherited:

[snip]

Quoted 11 lines

include/configs/igep0033.h line 47

Quoted 8 lines
include/configs/igep0033.h new file +8 -0
+/* Display cpuinfo */
+#define CONFIG_DISPLAY_CPUINFO
+/* Add libfdt-based support */
+#define CONFIG_OF_LIBFDT
+/* Enable passing of ATAGs */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG

Do you really have to support ATAGS and FDT? Just confirming.

No, I'll remove.

Quoted 15 lines

include/configs/igep0033.h line 59

Quoted 12 lines
include/configs/igep0033.h new file +11 -0
+/* Commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC

With CONFIG_CMD_FS_GENERIC and CMD_EXT4 do you really need CMD_EXT2 set?

You have reason, has no sense, I'll remove too.

Quoted 17 lines

[snip]

include/configs/igep0033.h line 77

Quoted 9 lines
include/configs/igep0033.h new file +9 -0
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+#define CONFIG_EXTRA_ENV_SETTINGS \
+     "loadaddr=0x80200000\0" \
+     "fdtaddr=0x80F80000\0" \
+     "fdt_high=0xffffffff\0" \
+     "rdaddr=0x81000000\0" \
+     "bootfile=/boot/uImage\0" \
+     "fdtfile=\0" \

You're setting the config options to get an easy run-time way to set fdtfile but not providing a script command to set it nor a C function. If you don't need run-time detection, just set fdtfile :)

I'll remove ftd related variables until fdt support is not tested.

Quoted 12 lines

include/configs/igep0033.h line 144

Quoted 7 lines
include/configs/igep0033.h new file +7 -0
+/*
+ * memtest works on 8 MB in DRAM after skipping 32MB from
+ * start addr of ram disk
+ */
+#define CONFIG_SYS_MEMTEST_START     (PHYS_DRAM_1 + (64 * 1024 * 1024))
+#define CONFIG_SYS_MEMTEST_END               (CONFIG_SYS_MEMTEST_START \
+                                     + (8 * 1024 * 1024))

The comment is wrong, and you can do any of:
- Opt-out of mtest (and see Wolfgang's readme on why that's probably a good idea)

Readed and convinced. Thanks for this point.

Quoted 13 lines

- Correct this to be all of RAM, minus a bit for a reasonably-sized U-Boot to be running in.

[snip]

include/configs/igep0033.h line 219

Quoted 4 lines
include/configs/igep0033.h new file +4 -0
+#define MTDIDS_DEFAULT                       "nand0=nand"
+#define MTDPARTS_DEFAULT             "mtdparts=nand:512k(SPL),"\
+                                     "1920k(U-Boot),128k(U-Boot Env),"\
+                                     "5m(Kernel),-(File System)"

Setting aside such a large space for U-Boot is something else you inherited, do you want to re-evaluate this or too late?

Is not too late, I'll reduce the U-Boot space, do you think 512k is sufficient ?

Quoted 7 lines

include/configs/igep0033.h line 248

Quoted 3 lines
include/configs/igep0033.h new file +3 -0
+#define CONFIG_SPL_NET_SUPPORT
+#define CONFIG_SPL_NET_VCI_STRING    "AM335x U-Boot SPL"
+#define CONFIG_SPL_ETH_SUPPORT

Keeping in mind the errata involved, does your board support CPSW SPL without needed the erratad-out mode?

We'll change the default bootmode in production boards so has no sense define this. I'll remove.

I'll send version 2, thanks again.

Cheers,
Enric

Quoted 4 lines

--
Tom

#5 lore raw

PATCH 2/2 ARM: Add support for IGEP COM AQUILA/CYGNUS

Tom,

One more question...

2013/4/4 Enric Balletbo Serra <[email protected]>

Quoted 91 lines

Hi Tom,

Thanks for your comments.

2013/4/4 Tom Rini <[email protected]>

Quoted 21 lines · Enric Balletbo i Serra
Quoted 15 lines

From: Enric Balletbo i Serra <[email protected]>

The IGEP COM AQUILA and CYGNUS are industrial processors modules with following highlights:

o AM3352/AM3354 Texas Instruments processor
o Cortex-A8 ARM CPU
o 3.3 volts Inputs / Outputs use industrial
o 256 MB DDR3 SDRAM / 128 Megabytes FLASH
o MicroSD card reader on-board
o Ethernet controller on-board
o JTAG debug connector available
o Designed for industrial range purposes

Quoted 1 line

In general, yay. But some specific comments that I know you inherited:

[snip]

Quoted 11 lines

include/configs/igep0033.h line 47

Quoted 8 lines
include/configs/igep0033.h new file +8 -0
+/* Display cpuinfo */
+#define CONFIG_DISPLAY_CPUINFO
+/* Add libfdt-based support */
+#define CONFIG_OF_LIBFDT
+/* Enable passing of ATAGs */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG

Do you really have to support ATAGS and FDT? Just confirming.

No, I'll remove.

Quoted 15 lines

include/configs/igep0033.h line 59

Quoted 12 lines
include/configs/igep0033.h new file +11 -0
+/* Commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC

With CONFIG_CMD_FS_GENERIC and CMD_EXT4 do you really need CMD_EXT2 set?

You have reason, has no sense, I'll remove too.

Quoted 17 lines

[snip]

include/configs/igep0033.h line 77

Quoted 9 lines
include/configs/igep0033.h new file +9 -0
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+#define CONFIG_EXTRA_ENV_SETTINGS \
+     "loadaddr=0x80200000\0" \
+     "fdtaddr=0x80F80000\0" \
+     "fdt_high=0xffffffff\0" \
+     "rdaddr=0x81000000\0" \
+     "bootfile=/boot/uImage\0" \
+     "fdtfile=\0" \

You're setting the config options to get an easy run-time way to set fdtfile but not providing a script command to set it nor a C function. If you don't need run-time detection, just set fdtfile :)

I'll remove ftd related variables until fdt support is not tested.

Quoted 7 lines

include/configs/igep0033.h

Quoted 6 lines
include/configs/igep0033.h new file +6 -0
+/*
+ * memtest works on 8 MB in DRAM after skipping 32MB from
+ * start addr of ram disk
+ */
+#define CONFIG_SYS_MEMTEST_START     (PHYS_DRAM_1 + (64 * 1024 * 1024))
+#define CONFIG_SYS_MEMTEST_END               (CONFIG_SYS_MEMTEST_START

\

Quoted 9 lines
Quoted 6 lines
Quoted 1 line

+ + (8 * 1024 * 1024))

The comment is wrong, and you can do any of:
- Opt-out of mtest (and see Wolfgang's readme on why that's probably a good idea)

Readed and convinced. Thanks for this point.

As explained in Wolfgang's readme shouldn't remove CONFIG_CMD_MEMTEST from config_cmd_default.h ?

Quoted 44 lines
Quoted 5 lines

- Correct this to be all of RAM, minus a bit for a reasonably-sized U-Boot to be running in.

Quoted 10 lines

[snip]

include/configs/igep0033.h line 219

Quoted 4 lines
include/configs/igep0033.h new file +4 -0
+#define MTDIDS_DEFAULT                       "nand0=nand"
+#define MTDPARTS_DEFAULT             "mtdparts=nand:512k(SPL),"\
+                                     "1920k(U-Boot),128k(U-Boot Env),"\
+                                     "5m(Kernel),-(File System)"

Setting aside such a large space for U-Boot is something else you inherited, do you want to re-evaluate this or too late?

Is not too late, I'll reduce the U-Boot space, do you think 512k is sufficient ?

Quoted 7 lines

include/configs/igep0033.h line 248

Quoted 3 lines
include/configs/igep0033.h new file +3 -0
+#define CONFIG_SPL_NET_SUPPORT
+#define CONFIG_SPL_NET_VCI_STRING    "AM335x U-Boot SPL"
+#define CONFIG_SPL_ETH_SUPPORT

Keeping in mind the errata involved, does your board support CPSW SPL without needed the erratad-out mode?

We'll change the default bootmode in production boards so has no sense define this. I'll remove.

I'll send version 2, thanks again.

Cheers,
Enric

Quoted 4 lines

--
Tom

#6 lore raw

PATCH 2/2 ARM: Add support for IGEP COM AQUILA/CYGNUS

On Thu, Apr 04, 2013 at 09:51:05AM +0200, Enric Balletbo Serra wrote:

[snip]

Quoted 14 lines
Quoted 14 lines
Quoted 13 lines

include/configs/igep0033.h

Quoted 6 lines
include/configs/igep0033.h new file +6 -0
+/*
+ * memtest works on 8 MB in DRAM after skipping 32MB from
+ * start addr of ram disk
+ */
+#define CONFIG_SYS_MEMTEST_START     (PHYS_DRAM_1 + (64 * 1024 * 1024))
+#define CONFIG_SYS_MEMTEST_END               (CONFIG_SYS_MEMTEST_START

\

Quoted 1 line

+ + (8 * 1024 * 1024))

The comment is wrong, and you can do any of:
- Opt-out of mtest (and see Wolfgang's readme on why that's probably a good idea)

Quoted 5 lines
Quoted 2 lines

Readed and convinced. Thanks for this point.

As explained in Wolfgang's readme shouldn't remove CONFIG_CMD_MEMTEST from config_cmd_default.h ?

When the time comes, as stated in doc/feature-removal-schedule.txt :) For now, #undef it.

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130404/810dd067/attachment.pgp>
#7 lore raw

PATCH 2/2 ARM: Add support for IGEP COM AQUILA/CYGNUS

In reply to Enric Balletbo Serra
Quoted 3 lines · Enric Balletbo Serra

2013/4/4 Tom Rini <[email protected]>

Quoted 1 line · Enric Balletbo i Serra

[snip]

Quoted 13 lines
Quoted 13 lines

- Correct this to be all of RAM, minus a bit for a reasonably-sized U-Boot to be running in.

[snip]

include/configs/igep0033.h line 219

Quoted 4 lines
include/configs/igep0033.h new file +4 -0
+#define MTDIDS_DEFAULT                       "nand0=nand"
+#define MTDPARTS_DEFAULT             "mtdparts=nand:512k(SPL),"\
+                                     "1920k(U-Boot),128k(U-Boot Env),"\
+                                     "5m(Kernel),-(File System)"

Setting aside such a large space for U-Boot is something else you inherited, do you want to re-evaluate this or too late?

Quoted 2 lines

Is not too late, I'll reduce the U-Boot space, do you think 512k is sufficient ?

Well, what redudancy are you doing? A single image within 512KiB is fine, sure. Two images wouldn't be, most likely :)

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130404/5a5430e9/attachment.pgp>