omap2420-h4: Fix u-boot support for board
cover omap2420-h4: Fix u-boot support for board
Currently, u-boot support for the omap2420-h4 board is broken and u-boot is not booting when program into flash. Fix u-boot support for this board.
Jon Hunter (4):
omap2420-h4: Fix DRAM initialisation
omap2420-h4: Fix booting from NOR flash
omap2420-h4: Add device tree support
omap2420-h4: Fix get_timer() and CONFIG_SYS_HZ
arch/arm/cpu/arm1136/omap24xx/timer.c | 8 ++++++-- arch/arm/include/asm/arch-omap24xx/omap2420.h | 6 +++--- board/ti/omap2420h4/config.mk | 4 ++-- board/ti/omap2420h4/mem.c | 13 ------------- board/ti/omap2420h4/omap2420h4.c | 24 ++++++++++++++++++------ include/configs/omap2420h4.h | 5 +++-- 6 files changed, 32 insertions(+), 28 deletions(-)
Signature · 1 line
1.7.10.4
PATCH 1/4 omap2420-h4: Fix DRAM initialisation
The size of the DRAM for the omap2420-h4 board is getting setup in the dram_init() function. However, for the current u-boot release this is too late and needs to be done in dram_init_banksize(). Therefore, add a dram_init_banksize() function for the omap2420-h4 board and setup the DRAM size there.
--- board/ti/omap2420h4/omap2420h4.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-)
board/ti/omap2420h4/omap2420h4.c +18 -6
@@ -190,10 +190,10 @@ void ether_init (void)* Routine: dram_init * Description: sets uboots idea of sdram size **********************************************/ -int dram_init (void ) +int dram_init (void ) {unsigned int size0=0 ,size1=0 ; -u32 mtype, btype, rev; +u32 mtype, btype;u8 chg_on =0x5 ;/* enable charge of back up battery */ u8 vmode_on =0x8C ;#define NOT_EARLY 0
@@ -202,7 +202,6 @@ int dram_init (void) btype =get_board_type (); mtype =get_mem_type (); - rev =get_cpu_rev ();display_board_info (btype);if (btype ==BOARD_H4_MENELAUS ){
@@ -217,15 +216,28 @@ int dram_init (void) size0 =get_sdr_cs_size (SDRC_CS0_OSET ); size1 =get_sdr_cs_size (SDRC_CS1_OSET ); - gd->bd->bi_dram[0 ].start =PHYS_SDRAM_1 ; - gd->bd->bi_dram[0 ].size = size0; + gd->ram_size =get_ram_size ((long *)PHYS_SDRAM_1 , size0 + size1); + +return 0 ; +} + +void dram_init_banksize (void ) +{ +unsigned int size0, size1; +u32 rev; + + rev =get_cpu_rev (); + size0 =get_sdr_cs_size (SDRC_CS0_OSET ); + size1 =get_sdr_cs_size (SDRC_CS1_OSET ); +if (rev ==CPU_2420_2422_ES1 )/* ES1's 128MB remap granularity isn't worth doing */ gd->bd->bi_dram[1 ].start =PHYS_SDRAM_2 ;else /* ES2 and above can remap at 32MB granularity */ gd->bd->bi_dram[1 ].start =PHYS_SDRAM_1 +size0; gd->bd->bi_dram[1 ].size = size1; -return 0 ; + gd->bd->bi_dram[0 ].start =PHYS_SDRAM_1 ; + gd->bd->bi_dram[0 ].size = size0; }/**********************************************************
Signature · 1 line
1.7.10.4
PATCH 2/4 omap2420-h4: Fix booting from NOR flash
In reply to Jon HunterThe omap2420-h4 board is using a RAM based address as the linker location for code. This is causing several problems when attempting to run the latest u-boot code base on this board from flash. Update the default linker location for code to be in NOR flash. Please note that OMAP maps the NOR flash to address 0x08000000 by default and so use this as the default address for the NOR flash.
Also remove legacy code that attempts to calculate where in flash the sdata structure, that holds the memory interface configuration data, is located. By changing the default linker location for code to flash this is no longer necessary.
--- arch/arm/include/asm/arch-omap24xx/omap2420.h | 6 +++--- board/ti/omap2420h4/config.mk | 4 ++-- board/ti/omap2420h4/mem.c | 13 ------------- include/configs/omap2420h4.h | 2 +- 4 files changed, 6 insertions(+), 19 deletions(-)
arch/arm/include/asm/arch-omap24xx/omap2420.h +3 -3
@@ -212,9 +212,9 @@# define H4_CS1_BASE 0x04000000/* debug board */ # define H4_CS2_BASE 0x0A000000/* wifi board */ #else -# define H4_CS0_BASE 0x04000000/* flash (64 Meg aligned) */ -# define H4_CS1_BASE 0x08000000/* debug board */ -# define H4_CS2_BASE 0x0A000000/* wifi board */ +# define H4_CS0_BASE 0x08000000/* flash (64 Meg aligned) */ +# define H4_CS1_BASE 0x04000000/* debug board */ +# define H4_CS2_BASE 0x0C000000/* wifi board */ #endif /* base address for indirect vectors (internal boot mode) */
board/ti/omap2420h4/config.mk +2 -2
@@ -14,7 +14,7 @@ # (mem base + reserved) # For use with external or internal boots. -CONFIG_SYS_TEXT_BASE = 0x80e80000 +#CONFIG_SYS_TEXT_BASE = 0x80e80000 # Used with full SRAM boot. # This is either with a GP system or a signed boot image.
@@ -24,5 +24,5 @@ CONFIG_SYS_TEXT_BASE = 0x80e80000 # Handy to get symbols to debug ROM version. #CONFIG_SYS_TEXT_BASE = 0x0 -#CONFIG_SYS_TEXT_BASE = 0x08000000 +CONFIG_SYS_TEXT_BASE = 0x08000000 #CONFIG_SYS_TEXT_BASE = 0x04000000
board/ti/omap2420h4/mem.c +0 -13
@@ -200,19 +200,6 @@ void do_sdrc_init(u32 offset, u32 early) __asm__ __volatile__("" : : :"memory" );/* limit compiler scope */ -/* u-boot is compiled to run in DDR or SRAM at 8xxxxxxx or 4xxxxxxx. -* If we are running in flash prior to relocation and we use data -* here which is not pc relative we need to get the address correct. -* We need to find the current flash mapping to dress up the initial -* pointer load. As long as this is const data we should be ok. -*/ -if ((early) &&running_in_flash ()){ - sdata = (sdrc_data_t *)(((u32 )sdata &0x0003FFFF ) |get_gpmc0_base ()); -/* NOR internal boot offset is 0x4000 from xloader signature */ -if (running_from_internal_boot ()) - sdata = (sdrc_data_t *)((u32 )sdata +0x4000 ); - } -if (!early && (((mtype =get_mem_type ()) ==DDR_COMBO )||(mtype ==DDR_STACKED ))) {if (mtype ==DDR_COMBO ){ pmask =BIT2 ;/* combo part has a shared CKE signal, can't use feature */
include/configs/omap2420h4.h +1 -1
@@ -220,7 +220,7 @@#define CONFIG_ENV_IS_IN_NAND 1#define CONFIG_ENV_OFFSET 0x80000/* environment starts here */ #else -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + SZ_128K) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + SZ_256K)#define CONFIG_ENV_IS_IN_FLASH 1#define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE#define CONFIG_ENV_OFFSET ( CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN )/* Environment after Monitor */
Signature · 1 line
1.7.10.4
PATCH 3/4 omap2420-h4: Add device tree support
In reply to Jon HunterEnable device-tree support for the omap2420-h4 board.
--- include/configs/omap2420h4.h | 1 + 1 file changed, 1 insertion(+)
include/configs/omap2420h4.h +1 -0
@@ -67,6 +67,7 @@#define CONFIG_SETUP_MEMORY_TAGS 1#define CONFIG_INITRD_TAG 1#define CONFIG_REVISION_TAG 1 +#define CONFIG_OF_LIBFDT /* * Size of malloc() pool
Signature · 1 line
1.7.10.4
PATCH 4/4 omap2420-h4: Fix get_timer() and CONFIG_SYS_HZ
In reply to Jon HunterThe function get_timer() should return time in ms and CONFIG_SYS_HZ should be set to 1000 by default. Fix both of these items.
--- arch/arm/cpu/arm1136/omap24xx/timer.c | 8 ++++++-- include/configs/omap2420h4.h | 2 +- 2 files changed, 7 insertions(+), 3 deletions(-)
arch/arm/cpu/arm1136/omap24xx/timer.c +6 -2
@@ -31,13 +31,16 @@*/ #include <common.h> +#include <asm/io.h> #include <asm/arch/bits.h> #include <asm/arch/omap2420.h> +#define TIMER_CLOCK (CONFIG_SYS_CLK_FREQ / (2 << CONFIG_SYS_PTV))#define TIMER_LOAD_VAL 0/* macro to read the 32 bit timer */ -#define READ_TIMER (*((volatile ulong *)(CONFIG_SYS_TIMERBASE+TCRR))) +#define READ_TIMER readl(CONFIG_SYS_TIMERBASE+TCRR) \ + / (TIMER_CLOCK / CONFIG_SYS_HZ)DECLARE_GLOBAL_DATA_PTR ;
@@ -99,7 +102,8 @@ ulong get_timer_masked (void) gd->arch.tbl += (now - gd->arch.lastinc); }else {/* we have rollover of incrementer */ - gd->arch.tbl += (0xFFFFFFFF - gd->arch.lastinc) + now; + gd->arch.tbl += ((0xFFFFFFFF / (TIMER_CLOCK /CONFIG_SYS_HZ )) + - gd->arch.lastinc) + now; } gd->arch.lastinc = now;return gd->arch.tbl;
include/configs/omap2420h4.h +1 -1
@@ -190,7 +190,7 @@#define CONFIG_SYS_TIMERBASE OMAP2420_GPT2#define CONFIG_SYS_PTV V_PTV/* 2^(PTV+1) */ -#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) +#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * Physical Memory Map
Signature · 1 line
1.7.10.4
PATCH 4/4 omap2420h4: Fix get_timer() and CONFIG_SYS_HZ
In reply to Jon HunterThe function get_timer() should return time in ms and CONFIG_SYS_HZ should be set to 1000 by default. Fix both of these items.
--- arch/arm/cpu/arm1136/omap24xx/timer.c | 8 ++++++-- include/configs/omap2420h4.h | 2 +- 2 files changed, 7 insertions(+), 3 deletions(-)
arch/arm/cpu/arm1136/omap24xx/timer.c +6 -2
@@ -31,13 +31,16 @@*/ #include <common.h> +#include <asm/io.h> #include <asm/arch/bits.h> #include <asm/arch/omap2420.h> +#define TIMER_CLOCK (CONFIG_SYS_CLK_FREQ / (2 << CONFIG_SYS_PTV))#define TIMER_LOAD_VAL 0/* macro to read the 32 bit timer */ -#define READ_TIMER (*((volatile ulong *)(CONFIG_SYS_TIMERBASE+TCRR))) +#define READ_TIMER readl(CONFIG_SYS_TIMERBASE+TCRR) \ + / (TIMER_CLOCK / CONFIG_SYS_HZ)DECLARE_GLOBAL_DATA_PTR ;
@@ -99,7 +102,8 @@ ulong get_timer_masked (void) gd->arch.tbl += (now - gd->arch.lastinc); }else {/* we have rollover of incrementer */ - gd->arch.tbl += (0xFFFFFFFF - gd->arch.lastinc) + now; + gd->arch.tbl += ((0xFFFFFFFF / (TIMER_CLOCK /CONFIG_SYS_HZ )) + - gd->arch.lastinc) + now; } gd->arch.lastinc = now;return gd->arch.tbl;
include/configs/omap2420h4.h +1 -1
@@ -190,7 +190,7 @@#define CONFIG_SYS_TIMERBASE OMAP2420_GPT2#define CONFIG_SYS_PTV V_PTV/* 2^(PTV+1) */ -#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV)) +#define CONFIG_SYS_HZ 1000/*----------------------------------------------------------------------- * Physical Memory Map
Signature · 1 line
1.7.10.4
PATCH 4/4 omap2420h4: Fix get_timer() and CONFIG_SYS_HZ
Quoted 2 lines · Jon Hunter
The function
get_timer()should return time in ms andCONFIG_SYS_HZshould be set to 1000 by default. Fix both of these items.
Ignore this patch it is a duplicate!
Jon
cover omap2420-h4: Fix u-boot support for board
In reply to Jon HunterQuoted 10 lines · Jon Hunter
Currently, u-boot support for the omap2420-h4 board is broken and u-boot is not booting when program into flash. Fix u-boot support for this board.
Jon Hunter (4):
omap2420-h4: Fix DRAM initialisation
omap2420-h4: Fix booting from NOR flash
omap2420-h4: Add device tree support
omap2420-h4: Fixget_timer()andCONFIG_SYS_HZ
Quoted 7 lines
arch/arm/cpu/arm1136/omap24xx/timer.c | 8 ++++++-- arch/arm/include/asm/arch-omap24xx/omap2420.h | 6 +++--- board/ti/omap2420h4/config.mk | 4 ++-- board/ti/omap2420h4/mem.c | 13 ------------- board/ti/omap2420h4/omap2420h4.c | 24 ++++++++++++++++++------ include/configs/omap2420h4.h | 5 +++-- 6 files changed, 32 insertions(+), 28 deletions(-)
Applied to u-boot-ti/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130410/cc63e8bb/attachment.pgp>