mx6-sabrelite: Setup CCM_CCOSR register
PATCH 1/1 mx6-sabrelite: Setup CCM_CCOSR register
From: Fabio Estevam <[email protected]>
Setup CCM_CCOSR register to provide a CKO1 clock frequency of 16.5 MHz.
CKO1 drives sgtl5000 codec clock on mx6qsabrelite and doing this setup in the bootloader will allow us to remove a lot of code in arch/arm/mach-imx/mach-imx6q.c from the mainline kernel.
--- .../boards/freescale-mx6-sabrelite/flash_header.c | 11 +++++++++++ 1 file changed, 11 insertions(+)
arch/arm/boards/freescale-mx6-sabrelite/flash_header.c +11 -0
@@ -152,6 +152,17 @@ struct imx_dcd_v2_entry __dcd_entry_section dcd_entry[] = {/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ DCD (MX6_IOMUXC_BASE_ADDR +0x018 ,0x007f007f ),DCD (MX6_IOMUXC_BASE_ADDR +0x01c ,0x007f007f ), + +/* +* Setup CCM_CCOSR register as follows: +* +* cko1_en = 1 --> CKO1 enabled +* cko1_div = 111 --> divide by 8 +* cko1_sel = 1011 --> ahb_clk_root +* +* This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz +*/ + DCD(MX6_CCM_BASE_ADDR + 0x060, 0x000000fb), };#define APP_DEST CONFIG_TEXT_BASE
Signature · 7 lines
1.7.9.5 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Quoted 7 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
Setup
CCM_CCOSRregister to provide a CKO1 clock frequency of 16.5 MHz.CKO1 drives sgtl5000 codec clock on mx6qsabrelite and doing this setup in the bootloader will allow us to remove a lot of code in
arch/arm/mach-imx/mach-imx6q.cfrom the mainline kernel.
expect the booloader to setup every think os wrong
the kernel need to handle the clock by himself
Best Regards,
J.
Quoted 36 lines
Signed-off-by Fabio Estevam <[email protected]>--- .../boards/freescale-mx6-sabrelite/flash_header.c | 11 +++++++++++ 1 file changed, 11 insertions(+)arch/arm/boards/freescale-mx6-sabrelite/flash_header.c +11
-0@@ -152,6 +152,17 @@ struct imx_dcd_v2_entry __dcd_entry_section dcd_entry[] = {/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ DCD (MX6_IOMUXC_BASE_ADDR +0x018 ,0x007f007f ),DCD (MX6_IOMUXC_BASE_ADDR +0x01c ,0x007f007f ), + +/* +* Setup CCM_CCOSR register as follows: +* +* cko1_en = 1 --> CKO1 enabled +* cko1_div = 111 --> divide by 8 +* cko1_sel = 1011 --> ahb_clk_root +* +* This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz +*/ + DCD(MX6_CCM_BASE_ADDR + 0x060, 0x000000fb), };#define APP_DEST CONFIG_TEXT_BASESignature · 7 lines
1.7.9.5 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox