Skip to contentSkip to conversation

mx6-sabrelite: Setup CCM_CCOSR register

PATCH In review Fabio Estevam 2 participants 2 messages Apr 17, 2013 – Apr 18, 2013 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mx6-sabrelite: Setup CCM_CCOSR register

From: Fabio Estevam <[email protected]>

Setup CCM_CCOSR register to provide a CKO1 clock frequency of 16.5 MHz.

CKO1 drives sgtl5000 codec clock on mx6qsabrelite and doing this setup in the bootloader will allow us to remove a lot of code in arch/arm/mach-imx/mach-imx6q.c from the mainline kernel.

---
 .../boards/freescale-mx6-sabrelite/flash_header.c  |   11 +++++++++++
 1 file changed, 11 insertions(+)
arch/arm/boards/freescale-mx6-sabrelite/flash_header.c +11 -0
index 61d482b..49326e0 100644
@@ -152,6 +152,17 @@ struct imx_dcd_v2_entry __dcd_entry_section dcd_entry[] = {
 	/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
 	DCD(MX6_IOMUXC_BASE_ADDR + 0x018, 0x007f007f),
 	DCD(MX6_IOMUXC_BASE_ADDR + 0x01c, 0x007f007f),
+
+	/*
+	 * Setup CCM_CCOSR register as follows:
+	 *
+	 * cko1_en  = 1	   --> CKO1 enabled
+	 * cko1_div = 111  --> divide by 8
+	 * cko1_sel = 1011 --> ahb_clk_root
+	 *
+	 * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
+	 */
+	DCD(MX6_CCM_BASE_ADDR + 0x060, 0x000000fb),
 };
 
 #define APP_DEST	CONFIG_TEXT_BASE
Signature · 7 lines
1.7.9.5


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#1 lore raw
Quoted 7 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

Setup CCM_CCOSR register to provide a CKO1 clock frequency of 16.5 MHz.

CKO1 drives sgtl5000 codec clock on mx6qsabrelite and doing this setup in the bootloader will allow us to remove a lot of code in arch/arm/mach-imx/mach-imx6q.c from the mainline kernel.

expect the booloader to setup every think os wrong

the kernel need to handle the clock by himself

Best Regards,
J.

Quoted 36 lines
---
 .../boards/freescale-mx6-sabrelite/flash_header.c  |   11 +++++++++++
 1 file changed, 11 insertions(+)
arch/arm/boards/freescale-mx6-sabrelite/flash_header.c +11 -0
index 61d482b..49326e0 100644
@@ -152,6 +152,17 @@ struct imx_dcd_v2_entry __dcd_entry_section dcd_entry[] = {
 	/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
 	DCD(MX6_IOMUXC_BASE_ADDR + 0x018, 0x007f007f),
 	DCD(MX6_IOMUXC_BASE_ADDR + 0x01c, 0x007f007f),
+
+	/*
+	 * Setup CCM_CCOSR register as follows:
+	 *
+	 * cko1_en  = 1	   --> CKO1 enabled
+	 * cko1_div = 111  --> divide by 8
+	 * cko1_sel = 1011 --> ahb_clk_root
+	 *
+	 * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
+	 */
+	DCD(MX6_CCM_BASE_ADDR + 0x060, 0x000000fb),
 };
 
 #define APP_DEST	CONFIG_TEXT_BASE
Signature · 7 lines
1.7.9.5


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox