regulator: tps65910: Convert to use regulator_map_voltage_ascend
Subsystems (2)
PATCH 1/1 regulator: tps65910: Convert to use regulator_map_voltage_ascend
All regulators have ascendant voltage list in this driver. Some regulators have more than 200 supported voltages. e.g.
For TPS65910_REG_VDD1 and TPS65910_REG_VDD2:n_voltages = VDD1_2_NUM_VOLT_FINE * VDD1_2_NUM_VOLT_COARSE
= 73 * 3
= 219Thus it worth converting to regulator_map_voltage_ascend rather than use default regulator_map_voltage_iterate.
For consistent, convert all regulators to regulator_map_voltage_ascend.
Signed-off-by Axel Lin <[email protected]>
--- drivers/regulator/tps65910-regulator.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/regulator/tps65910-regulator.c +4 -0
@@ -748,6 +748,7 @@ static struct regulator_ops tps65910_ops_dcdc = { .set_voltage_sel = tps65910_set_voltage_dcdc_sel, .set_voltage_time_sel = regulator_set_voltage_time_sel, .list_voltage = tps65910_list_voltage_dcdc, + .map_voltage = regulator_map_voltage_ascend, };static struct regulator_ops tps65910_ops_vdd3 = {
@@ -758,6 +759,7 @@ static struct regulator_ops tps65910_ops_vdd3 = { .get_mode = tps65910_get_mode, .get_voltage = tps65910_get_voltage_vdd3, .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_ascend, };static struct regulator_ops tps65910_ops = {
@@ -769,6 +771,7 @@ static struct regulator_ops tps65910_ops = { .get_voltage_sel = tps65910_get_voltage_sel, .set_voltage_sel = tps65910_set_voltage_sel, .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_ascend, };static struct regulator_ops tps65911_ops = {
@@ -780,6 +783,7 @@ static struct regulator_ops tps65911_ops = { .get_voltage_sel = tps65911_get_voltage_sel, .set_voltage_sel = tps65911_set_voltage_sel, .list_voltage = tps65911_list_voltage, + .map_voltage = regulator_map_voltage_ascend, }; static int tps65910_set_ext_sleep_config(struct tps65910_reg *pmic,
Signature · 1 line
1.7.10.4
Quoted 3 lines · Axel Lin
All regulators have ascendant voltage list in this driver. Some regulators have more than 200 supported voltages. e.g.
Applied, thanks.