Skip to contentSkip to conversation

regulator: tps65910: Convert to use regulator_map_voltage_ascend

PATCH Applied Axel Lin 2 participants 2 messages Apr 20, 2013 – Apr 23, 2013

Subsystems (2)
lore
Share & tools
lore

Axel Lin

author
#0 lore raw

PATCH 1/1 regulator: tps65910: Convert to use regulator_map_voltage_ascend

All regulators have ascendant voltage list in this driver. Some regulators have more than 200 supported voltages. e.g.
For TPS65910_REG_VDD1 and TPS65910_REG_VDD2:
n_voltages = VDD1_2_NUM_VOLT_FINE * VDD1_2_NUM_VOLT_COARSE

           = 73 * 3
           = 219

Thus it worth converting to regulator_map_voltage_ascend rather than use default regulator_map_voltage_iterate.

For consistent, convert all regulators to regulator_map_voltage_ascend.

---
 drivers/regulator/tps65910-regulator.c |    4 ++++
 1 file changed, 4 insertions(+)
drivers/regulator/tps65910-regulator.c +4 -0
index 6ba6931..45c1644 100644
@@ -748,6 +748,7 @@ static struct regulator_ops tps65910_ops_dcdc = {
 	.set_voltage_sel	= tps65910_set_voltage_dcdc_sel,
 	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
 	.list_voltage		= tps65910_list_voltage_dcdc,
+	.map_voltage		= regulator_map_voltage_ascend,
 };
 
 static struct regulator_ops tps65910_ops_vdd3 = {
@@ -758,6 +759,7 @@ static struct regulator_ops tps65910_ops_vdd3 = {
 	.get_mode		= tps65910_get_mode,
 	.get_voltage		= tps65910_get_voltage_vdd3,
 	.list_voltage		= regulator_list_voltage_table,
+	.map_voltage		= regulator_map_voltage_ascend,
 };
 
 static struct regulator_ops tps65910_ops = {
@@ -769,6 +771,7 @@ static struct regulator_ops tps65910_ops = {
 	.get_voltage_sel	= tps65910_get_voltage_sel,
 	.set_voltage_sel	= tps65910_set_voltage_sel,
 	.list_voltage		= regulator_list_voltage_table,
+	.map_voltage		= regulator_map_voltage_ascend,
 };
 
 static struct regulator_ops tps65911_ops = {
@@ -780,6 +783,7 @@ static struct regulator_ops tps65911_ops = {
 	.get_voltage_sel	= tps65911_get_voltage_sel,
 	.set_voltage_sel	= tps65911_set_voltage_sel,
 	.list_voltage		= tps65911_list_voltage,
+	.map_voltage		= regulator_map_voltage_ascend,
 };
 
 static int tps65910_set_ext_sleep_config(struct tps65910_reg *pmic,
Signature · 1 line
1.7.10.4
maintainer Applied
#1 lore raw
Quoted 3 lines · Axel Lin

All regulators have ascendant voltage list in this driver. Some regulators have more than 200 supported voltages. e.g.

Applied, thanks.