mxs: Explain why some mx23 DDR registers are not configured
Subsystems (2)
Fabio Estevam
reviewerPATCH 1/1 mxs: Explain why some mx23 DDR registers are not configured
From: Fabio Estevam <[email protected]>
Put an explanation in the source code as to why some DDR registers do not need to be configured.
Signed-off-by Fabio Estevam <[email protected]>
--- arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 9 +++++++++ 1 file changed, 9 insertions(+)
arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c +9 -0
@@ -127,6 +127,15 @@ static void initialize_dram_values(void)mxs_adjust_memory_params (dram_vals); +/* +* HW_DRAM_CTL27, HW_DRAM_CTL28 and HW_DRAM_CTL35 are not initialized as +* per FSL bootlets code. +* +* mx23 Reference Manual marks HW_DRAM_CTL27 and HW_DRAM_CTL28 as +* "reserved". +* HW_DRAM_CTL8 is setup as the last element. +* So skip the initialization of these HW_DRAM_CTL registers. +*/ for (i =0 ; i <ARRAY_SIZE (dram_vals); i++) {if (i ==8 || i ==27 || i ==28 || i ==35 )continue ;
Signature · 1 line
1.7.9.5
PATCH 1/1 mxs: Explain why some mx23 DDR registers are not configured
Quoted 7 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
Put an explanation in the source code as to why some DDR registers do not need to be configured.
Signed-off-by Fabio Estevam <[email protected]>---
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================