Skip to contentSkip to conversation

toolchain: blackfin: Remove Blackfin toolchain 2011R1 release.

PATCH Superseded Sonic Zhang 2 participants 4 messages May 15, 2013 – May 26, 2013

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 toolchain: blackfin: Remove Blackfin toolchain 2011R1 release.

From: Sonic Zhang <[email protected]>

ADI officially supports the buildroot and related GNU toolchain for Blackfin since ADI's 2012R1 release only. In order to avoid confusion, it is better to remove the 2011R1 GNU toolchain for Blackfin. In addition, the 2011R1 GNU toolchain for Blackfin doesn't support the BF60x processors.

---
 toolchain/toolchain-external/Config.in   | 19 -------------------
 toolchain/toolchain-external/ext-tool.mk |  8 +-------
 2 files changed, 1 insertion(+), 26 deletions(-)
toolchain/toolchain-external/Config.in +0 -19
index 1386ae7..da8c689 100644
@@ -614,23 +614,6 @@ config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1
 	  Toolchain for the Blackfin architecture, from
 	  http://blackfin.uclinux.org.
 
-config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2011R1
-	bool "Blackfin.uclinux.org 2011R1-RC4"
-	depends on BR2_bfin
-	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
-	select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
-	select BR2_INSTALL_LIBSTDCPP
-	select BR2_LARGEFILE
-	select BR2_INET_IPV6
-	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
-	select BR2_USE_WCHAR
-	select BR2_TOOLCHAIN_HAS_THREADS
-	select BR2_TOOLCHAIN_HAS_THREADS_DEBUG
-	select BR2_HOSTARCH_NEEDS_IA32_LIBS
-	help
-	  Toolchain for the Blackfin architecture, from
-	  http://blackfin.uclinux.org.
-
 config BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_14_3
 	bool "Xilinx Little Endian Microblaze GNU Tools"
 	depends on BR2_microblazeel
@@ -784,8 +767,6 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX
 	default "i686-pc-linux-gnu"	 if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201109
 	default "i686-pc-linux-gnu"	 if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201203
 	default "i686-pc-linux-gnu"	 if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209
-	default "bfin-uclinux"		 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2011R1 && BR2_BINFMT_FLAT
-	default "bfin-linux-uclibc"	 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2011R1 && BR2_BINFMT_FDPIC
 	default "bfin-uclinux"		 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1 && BR2_BINFMT_FLAT
 	default "bfin-linux-uclibc"	 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1 && BR2_BINFMT_FDPIC
 	default "bfin-uclinux"		 if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 && BR2_BINFMT_FLAT
toolchain/toolchain-external/ext-tool.mk +1 -7
index 6f1fbe0..daa7527 100644
@@ -252,12 +252,6 @@ TOOLCHAIN_EXTERNAL_SOURCE=ia32-2012.03-27-i686-pc-linux-gnu-i386-linux.tar.bz2
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209),y)
 TOOLCHAIN_EXTERNAL_SITE=https://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu/
 TOOLCHAIN_EXTERNAL_SOURCE=ia32-2012.09-62-i686-pc-linux-gnu-i386-linux.tar.bz2
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2011R1),y)
-TOOLCHAIN_EXTERNAL_SITE_1   = http://blackfin.uclinux.org/gf/download/frsrelease/531/9509/
-TOOLCHAIN_EXTERNAL_SOURCE_1 = blackfin-toolchain-2011R1-RC4.i386.tar.bz2
-TOOLCHAIN_EXTERNAL_SITE_2   = http://blackfin.uclinux.org/gf/download/frsrelease/531/9517/
-TOOLCHAIN_EXTERNAL_SOURCE_2 = blackfin-toolchain-uclibc-full-2011R1-RC4.i386.tar.bz2
-TOOLCHAIN_EXTERNAL_SOURCE   = $(TOOLCHAIN_EXTERNAL_SOURCE_1) $(TOOLCHAIN_EXTERNAL_SOURCE_2)
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1),y)
 TOOLCHAIN_EXTERNAL_SITE_1   = http://blackfin.uclinux.org/gf/download/frsrelease/559/9858/
 TOOLCHAIN_EXTERNAL_SOURCE_1 = blackfin-toolchain-2012R1-RC2.i386.tar.bz2
@@ -309,7 +303,7 @@ endif
 # contain ./opt/uClinux/{bfin-uclinux,bfin-linux-uclibc} directories,
 # which themselves contain the toolchain. This is why we strip more
 # components than usual.
-ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2011R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2),y)
+ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2),y)
 $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE_1):
 	$(call DOWNLOAD,$(TOOLCHAIN_EXTERNAL_SITE_1:/=:/=)/$(TOOLCHAIN_EXTERNAL_SOURCE_1))
 
Signature · 1 line
1.8.2.3
#1 lore raw

PATCH v2 1/1 toolchain: blackfin: Remove Blackfin toolchain 2011R1 release.

Hi Thomas,

Quoted 78 lines · Sonic Zhang

From: Sonic Zhang <[email protected]>

ADI officially supports the buildroot and related GNU toolchain for Blackfin since ADI's 2012R1 release only. In order to avoid confusion, it is better to remove the 2011R1 GNU toolchain for Blackfin. In addition, the 2011R1 GNU toolchain for Blackfin doesn't support the BF60x processors.

---
 toolchain/toolchain-external/Config.in   | 19 -------------------
 toolchain/toolchain-external/ext-tool.mk |  8 +-------
 2 files changed, 1 insertion(+), 26 deletions(-)
toolchain/toolchain-external/Config.in +0 -19
index 1386ae7..da8c689 100644
@@ -614,23 +614,6 @@ config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1
          Toolchain for the Blackfin architecture, from
          http://blackfin.uclinux.org.
 
-config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2011R1
-       bool "Blackfin.uclinux.org 2011R1-RC4"
-       depends on BR2_bfin
-       depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
-       select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
-       select BR2_INSTALL_LIBSTDCPP
-       select BR2_LARGEFILE
-       select BR2_INET_IPV6
-       select BR2_TOOLCHAIN_HAS_NATIVE_RPC
-       select BR2_USE_WCHAR
-       select BR2_TOOLCHAIN_HAS_THREADS
-       select BR2_TOOLCHAIN_HAS_THREADS_DEBUG
-       select BR2_HOSTARCH_NEEDS_IA32_LIBS
-       help
-         Toolchain for the Blackfin architecture, from
-         http://blackfin.uclinux.org.
-
 config BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_14_3
        bool "Xilinx Little Endian Microblaze GNU Tools"
        depends on BR2_microblazeel
@@ -784,8 +767,6 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX
        default "i686-pc-linux-gnu"      if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201109
        default "i686-pc-linux-gnu"      if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201203
        default "i686-pc-linux-gnu"      if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209
-       default "bfin-uclinux"           if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2011R1 && BR2_BINFMT_FLAT
-       default "bfin-linux-uclibc"      if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2011R1 && BR2_BINFMT_FDPIC
        default "bfin-uclinux"           if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1 && BR2_BINFMT_FLAT
        default "bfin-linux-uclibc"      if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1 && BR2_BINFMT_FDPIC
        default "bfin-uclinux"           if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 && BR2_BINFMT_FLAT
toolchain/toolchain-external/ext-tool.mk +1 -8
index 6f1fbe0..daa7527 100644
@@ -252,12 +252,6 @@ TOOLCHAIN_EXTERNAL_SOURCE=ia32-2012.03-27-i686-pc-linux-gnu-i386-linux.tar.bz2
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209),y)
 TOOLCHAIN_EXTERNAL_SITE=https://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu/
 TOOLCHAIN_EXTERNAL_SOURCE=ia32-2012.09-62-i686-pc-linux-gnu-i386-linux.tar.bz2
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2011R1),y)
-TOOLCHAIN_EXTERNAL_SITE_1   = http://blackfin.uclinux.org/gf/download/frsrelease/531/9509/
-TOOLCHAIN_EXTERNAL_SOURCE_1 = blackfin-toolchain-2011R1-RC4.i386.tar.bz2
-TOOLCHAIN_EXTERNAL_SITE_2   = http://blackfin.uclinux.org/gf/download/frsrelease/531/9517/
-TOOLCHAIN_EXTERNAL_SOURCE_2 = blackfin-toolchain-uclibc-full-2011R1-RC4.i386.tar.bz2
-TOOLCHAIN_EXTERNAL_SOURCE   = $(TOOLCHAIN_EXTERNAL_SOURCE_1) $(TOOLCHAIN_EXTERNAL_SOURCE_2)
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1),y)
 TOOLCHAIN_EXTERNAL_SITE_1   = http://blackfin.uclinux.org/gf/download/frsrelease/559/9858/
 TOOLCHAIN_EXTERNAL_SOURCE_1 = blackfin-toolchain-2012R1-RC2.i386.tar.bz2
@@ -309,7 +303,7 @@ endif
 # contain ./opt/uClinux/{bfin-uclinux,bfin-linux-uclibc} directories,
 # which themselves contain the toolchain. This is why we strip more
 # components than usual.
-ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2011R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2),y)
+ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2),y)
 $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE_1):
        $(call DOWNLOAD,$(TOOLCHAIN_EXTERNAL_SITE_1:/=:/=)/$(TOOLCHAIN_EXTERNAL_SOURCE_1))
 
--
Quoted 3 lines

1.8.2.3

May I have your Acked-by now?

Regards,

Sonic

#2 lore raw

PATCH v2 1/1 toolchain: blackfin: Remove Blackfin toolchain 2011R1 release.

In reply to Sonic Zhang

Dear Sonic Zhang,

Quoted 9 lines · Sonic Zhang

From: Sonic Zhang <[email protected]>

ADI officially supports the buildroot and related GNU toolchain for Blackfin since ADI's 2012R1 release only. In order to avoid confusion, it is better to remove the 2011R1 GNU toolchain for Blackfin. In addition, the 2011R1 GNU toolchain for Blackfin doesn't support the BF60x processors.

While still not highly convinced by the meaning of "supported by ADI" in the context of Buildroot, since we keep two newer toolchains, and Peter seems happy with this:

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#3 lore raw

PATCH v2 1/1 toolchain: blackfin: Remove Blackfin toolchain 2011R1 release.

In reply to Sonic Zhang

Dear Sonic Zhang,

Quoted 9 lines · Sonic Zhang

From: Sonic Zhang <[email protected]>

ADI officially supports the buildroot and related GNU toolchain for Blackfin since ADI's 2012R1 release only. In order to avoid confusion, it is better to remove the 2011R1 GNU toolchain for Blackfin. In addition, the 2011R1 GNU toolchain for Blackfin doesn't support the BF60x processors.

I've taken this patch in one of my branch, which I will submit to Peter soon.

Peter, no need to take this patch direclty, I'll send it to you with other changes.

Thanks,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com