toolchain: blackfin: Remove Blackfin toolchain 2011R1 release.
PATCH v2 1/1 toolchain: blackfin: Remove Blackfin toolchain 2011R1 release.
From: Sonic Zhang <[email protected]>
ADI officially supports the buildroot and related GNU toolchain for Blackfin since ADI's 2012R1 release only. In order to avoid confusion, it is better to remove the 2011R1 GNU toolchain for Blackfin. In addition, the 2011R1 GNU toolchain for Blackfin doesn't support the BF60x processors.
--- toolchain/toolchain-external/Config.in | 19 ------------------- toolchain/toolchain-external/ext-tool.mk | 8 +------- 2 files changed, 1 insertion(+), 26 deletions(-)
toolchain/toolchain-external/Config.in +0 -19
@@ -614,23 +614,6 @@ config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1 Toolchain for the Blackfin architecture, from http://blackfin.uclinux.org. -config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2011R1 - bool "Blackfin.uclinux.org 2011R1-RC4" - depends on BR2_bfin - depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" - select BR2_TOOLCHAIN_EXTERNAL_UCLIBC - select BR2_INSTALL_LIBSTDCPP - select BR2_LARGEFILE - select BR2_INET_IPV6 - select BR2_TOOLCHAIN_HAS_NATIVE_RPC - select BR2_USE_WCHAR - select BR2_TOOLCHAIN_HAS_THREADS - select BR2_TOOLCHAIN_HAS_THREADS_DEBUG - select BR2_HOSTARCH_NEEDS_IA32_LIBS - help - Toolchain for the Blackfin architecture, from - http://blackfin.uclinux.org. - config BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_14_3 bool "Xilinx Little Endian Microblaze GNU Tools" depends on BR2_microblazeel
@@ -784,8 +767,6 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX default "i686-pc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201109 default "i686-pc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201203 default "i686-pc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209 - default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2011R1 && BR2_BINFMT_FLAT - default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2011R1 && BR2_BINFMT_FDPIC default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1 && BR2_BINFMT_FLAT default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1 && BR2_BINFMT_FDPIC default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 && BR2_BINFMT_FLAT
toolchain/toolchain-external/ext-tool.mk +1 -7
@@ -252,12 +252,6 @@ TOOLCHAIN_EXTERNAL_SOURCE=ia32-2012.03-27-i686-pc-linux-gnu-i386-linux.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209),y) TOOLCHAIN_EXTERNAL_SITE=https://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu/ TOOLCHAIN_EXTERNAL_SOURCE=ia32-2012.09-62-i686-pc-linux-gnu-i386-linux.tar.bz2 -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2011R1),y) -TOOLCHAIN_EXTERNAL_SITE_1 = http://blackfin.uclinux.org/gf/download/frsrelease/531/9509/ -TOOLCHAIN_EXTERNAL_SOURCE_1 = blackfin-toolchain-2011R1-RC4.i386.tar.bz2 -TOOLCHAIN_EXTERNAL_SITE_2 = http://blackfin.uclinux.org/gf/download/frsrelease/531/9517/ -TOOLCHAIN_EXTERNAL_SOURCE_2 = blackfin-toolchain-uclibc-full-2011R1-RC4.i386.tar.bz2 -TOOLCHAIN_EXTERNAL_SOURCE = $(TOOLCHAIN_EXTERNAL_SOURCE_1) $(TOOLCHAIN_EXTERNAL_SOURCE_2) else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1),y) TOOLCHAIN_EXTERNAL_SITE_1 = http://blackfin.uclinux.org/gf/download/frsrelease/559/9858/ TOOLCHAIN_EXTERNAL_SOURCE_1 = blackfin-toolchain-2012R1-RC2.i386.tar.bz2
@@ -309,7 +303,7 @@ endif # contain ./opt/uClinux/{bfin-uclinux,bfin-linux-uclibc} directories, # which themselves contain the toolchain. This is why we strip more # components than usual. -ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2011R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2),y) +ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2),y) $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE_1): $(call DOWNLOAD,$(TOOLCHAIN_EXTERNAL_SITE_1:/=:/=)/$(TOOLCHAIN_EXTERNAL_SOURCE_1))
Signature · 1 line
1.8.2.3
PATCH v2 1/1 toolchain: blackfin: Remove Blackfin toolchain 2011R1 release.
Hi Thomas,
Quoted 78 lines · Sonic Zhang
From: Sonic Zhang <[email protected]>
ADI officially supports the buildroot and related GNU toolchain for Blackfin since ADI's 2012R1 release only. In order to avoid confusion, it is better to remove the 2011R1 GNU toolchain for Blackfin. In addition, the 2011R1 GNU toolchain for Blackfin doesn't support the BF60x processors.
Signed-off-by Sonic Zhang <[email protected]>--- toolchain/toolchain-external/Config.in | 19 ------------------- toolchain/toolchain-external/ext-tool.mk | 8 +------- 2 files changed, 1 insertion(+), 26 deletions(-)toolchain/toolchain-external/Config.in +0
-19@@ -614,23 +614,6 @@ config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1 Toolchain for the Blackfin architecture, from http://blackfin.uclinux.org. -config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2011R1 - bool "Blackfin.uclinux.org 2011R1-RC4" - depends on BR2_bfin - depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86" - select BR2_TOOLCHAIN_EXTERNAL_UCLIBC - select BR2_INSTALL_LIBSTDCPP - select BR2_LARGEFILE - select BR2_INET_IPV6 - select BR2_TOOLCHAIN_HAS_NATIVE_RPC - select BR2_USE_WCHAR - select BR2_TOOLCHAIN_HAS_THREADS - select BR2_TOOLCHAIN_HAS_THREADS_DEBUG - select BR2_HOSTARCH_NEEDS_IA32_LIBS - help - Toolchain for the Blackfin architecture, from - http://blackfin.uclinux.org. - config BR2_TOOLCHAIN_EXTERNAL_XILINX_MICROBLAZEEL_14_3 bool "Xilinx Little Endian Microblaze GNU Tools" depends on BR2_microblazeel@@ -784,8 +767,6 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX default "i686-pc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201109 default "i686-pc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201203 default "i686-pc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209 - default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2011R1 && BR2_BINFMT_FLAT - default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2011R1 && BR2_BINFMT_FDPIC default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1 && BR2_BINFMT_FLAT default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1 && BR2_BINFMT_FDPIC default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 && BR2_BINFMT_FLATtoolchain/toolchain-external/ext-tool.mk +1
-8@@ -252,12 +252,6 @@ TOOLCHAIN_EXTERNAL_SOURCE=ia32-2012.03-27-i686-pc-linux-gnu-i386-linux.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209),y) TOOLCHAIN_EXTERNAL_SITE=https://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu/ TOOLCHAIN_EXTERNAL_SOURCE=ia32-2012.09-62-i686-pc-linux-gnu-i386-linux.tar.bz2 -else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2011R1),y) -TOOLCHAIN_EXTERNAL_SITE_1 = http://blackfin.uclinux.org/gf/download/frsrelease/531/9509/ -TOOLCHAIN_EXTERNAL_SOURCE_1 = blackfin-toolchain-2011R1-RC4.i386.tar.bz2 -TOOLCHAIN_EXTERNAL_SITE_2 = http://blackfin.uclinux.org/gf/download/frsrelease/531/9517/ -TOOLCHAIN_EXTERNAL_SOURCE_2 = blackfin-toolchain-uclibc-full-2011R1-RC4.i386.tar.bz2 -TOOLCHAIN_EXTERNAL_SOURCE = $(TOOLCHAIN_EXTERNAL_SOURCE_1) $(TOOLCHAIN_EXTERNAL_SOURCE_2) else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1),y) TOOLCHAIN_EXTERNAL_SITE_1 = http://blackfin.uclinux.org/gf/download/frsrelease/559/9858/ TOOLCHAIN_EXTERNAL_SOURCE_1 = blackfin-toolchain-2012R1-RC2.i386.tar.bz2@@ -309,7 +303,7 @@ endif # contain ./opt/uClinux/{bfin-uclinux,bfin-linux-uclibc} directories, # which themselves contain the toolchain. This is why we strip more # components than usual. -ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2011R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2),y) +ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2),y) $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE_1): $(call DOWNLOAD,$(TOOLCHAIN_EXTERNAL_SITE_1:/=:/=)/$(TOOLCHAIN_EXTERNAL_SOURCE_1)) --
Quoted 3 lines
1.8.2.3
May I have your Acked-by now?
Regards,
Sonic
PATCH v2 1/1 toolchain: blackfin: Remove Blackfin toolchain 2011R1 release.
In reply to Sonic ZhangDear Sonic Zhang,
Quoted 9 lines · Sonic Zhang
From: Sonic Zhang <[email protected]>
ADI officially supports the buildroot and related GNU toolchain for Blackfin since ADI's 2012R1 release only. In order to avoid confusion, it is better to remove the 2011R1 GNU toolchain for Blackfin. In addition, the 2011R1 GNU toolchain for Blackfin doesn't support the BF60x processors.
Signed-off-by Sonic Zhang <[email protected]>
While still not highly convinced by the meaning of "supported by ADI" in the context of Buildroot, since we keep two newer toolchains, and Peter seems happy with this:
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH v2 1/1 toolchain: blackfin: Remove Blackfin toolchain 2011R1 release.
In reply to Sonic ZhangDear Sonic Zhang,
Quoted 9 lines · Sonic Zhang
From: Sonic Zhang <[email protected]>
ADI officially supports the buildroot and related GNU toolchain for Blackfin since ADI's 2012R1 release only. In order to avoid confusion, it is better to remove the 2011R1 GNU toolchain for Blackfin. In addition, the 2011R1 GNU toolchain for Blackfin doesn't support the BF60x processors.
Signed-off-by Sonic Zhang <[email protected]>
I've taken this patch in one of my branch, which I will submit to Peter soon.
Peter, no need to take this patch direclty, I'll send it to you with other changes.
Thanks,
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com