Skip to contentSkip to conversation

Intel Core2Quad Q6600 2,4 GHz Socket775 FSB1066

DISCUSSION Stefan Eder 4 participants 8 messages Sep 27, 2007 – Sep 28, 2007

lore
Share & tools
lore
#0 lore raw

Hallo everyone,
ist there a chance for powersaving with the following CPU? And if so, what are the related modules to load?

Thanks a lot

cpuid | grep SpeedStep
Enhanced Intel SpeedStep Technology = true

cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
stepping : 11
cpu MHz : 2393.984
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 4791.85
clflush size : 64

#1 lore raw

Hi, I have the same question. Tryed all powersaving modules, but
no one worked.
Stefan> Hallo everyone,
Stefan> ist there a chance for powersaving with the following CPU? And if so, what are Stefan> the related modules to load?

Stefan> Thanks a lot

Stefan> cpuid | grep SpeedStep
Stefan> Enhanced Intel SpeedStep Technology = true

Stefan> cat /proc/cpuinfo

Stefan> processor       : 0
Stefan> vendor_id       : GenuineIntel
Stefan> cpu family      : 6
Stefan> model           : 15
Stefan> model name      : Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
Stefan> stepping        : 11
Stefan> cpu MHz         : 2393.984
Stefan> cache size      : 4096 KB
Stefan> physical id     : 0
Stefan> siblings        : 4
Stefan> core id         : 0
Stefan> cpu cores       : 4
Stefan> fdiv_bug        : no
Stefan> hlt_bug         : no
Stefan> f00f_bug        : no
Stefan> coma_bug        : no
Stefan> fpu             : yes
Stefan> fpu_exception   : yes
Stefan> cpuid level     : 10
Stefan> wp              : yes
Stefan> flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca

Stefan> cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm Stefan> constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
Stefan> bogomips : 4791.85
Stefan> clflush size : 64

#2 lore raw
Quoted 5 lines · [email protected] wrote:

Hi, I have the same question. Tryed all powersaving modules, but
no one worked.
Stefan> Hallo everyone,
Stefan> ist there a chance for powersaving with the following CPU? And if so, what are Stefan> the related modules to load?

acpi-cpufreq + cpufreq-ondemand works on the core2 quad I'm typing this on...

$ cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 15
model name      : Intel(R) Core(TM)2 Quad CPU           @ 2.66GHz
stepping        : 7
cpu MHz         : 1596.000
cache size      : 4096 KB
physical id     : 0
siblings        : 4
core id         : 0
cpu cores       : 4
fpu             : yes
fpu_exception   : yes
cpuid level     : 10
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall
nx lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips        : 5335.65
clflush size    : 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual

If it doesn't work for you, I'd probably blame your motherboard BIOS.

Signature · 2 lines
Jarod Wilson
[email protected]

_______________________________________________
Cpufreq mailing list
[email protected]
http://lists.linux.org.uk/mailman/listinfo/cpufreq

#3 lore raw
In reply to Stefan Eder
Quoted 2 lines · Stefan Eder

Hallo everyone,
ist there a chance for powersaving with the following CPU?

Yes.

Quoted 2 lines

And if so, what are
the related modules to load?

acpi-cpufreq for freq scaling support, cpufreq-ondemand for your governor (may be built-in though)

Signature · 2 lines
Jarod Wilson
[email protected]

_______________________________________________
Cpufreq mailing list
[email protected]
http://lists.linux.org.uk/mailman/listinfo/cpufreq

#4 lore raw

Am Donnerstag, 27. September 2007 23:18:54 schrieb Jarod Wilson:

Quoted 11 lines
Quoted 2 lines · Stefan Eder

Hallo everyone,
ist there a chance for powersaving with the following CPU?

Yes.

Quoted 2 lines

And if so, what are
the related modules to load?

acpi-cpufreq for freq scaling support, cpufreq-ondemand for your governor (may be built-in though)

Hallo, tried this module on openSUSE 10.3 RC1:

modprobe acpi-cpufreq
FATAL: Error inserting acpi_cpufreq (/lib/modules/2.6.22.5-29-bigsmp/kernel/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.ko):
No such device

Thank you.

#5 lore raw
Quoted 22 lines

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Stefan Eder
Sent: Thursday, September 27, 2007 2:33 PM
To: [email protected]
Subject: Re: Intel Core2Quad Q6600 2,4 GHz Socket775 FSB1066

Am Donnerstag, 27. September 2007 23:18:54 schrieb Jarod Wilson:

Quoted 11 lines
Quoted 2 lines · Stefan Eder

Hallo everyone,
ist there a chance for powersaving with the following CPU?

Yes.

Quoted 2 lines

And if so, what are
the related modules to load?

acpi-cpufreq for freq scaling support, cpufreq-ondemand for your governor (may be built-in though)

Quoted 8 lines

Hallo, tried this module on openSUSE 10.3 RC1:

modprobe acpi-cpufreq
FATAL: Error inserting acpi_cpufreq (/lib/modules/2.6.22.5-29-bigsmp/kernel/arch/i386/kernel/cpu/cp ufreq/acpi-cpufreq.ko):
No such device

Depends on whether your BIOS is enabling this feature. Check in BIOS options for any switch related to this feature. Also make sure you have the latest BIOS for the platform.

Thanks,
Venki

#6 lore raw
In reply to Stefan Eder
Quoted 11 lines · Stefan Eder

Am Donnerstag, 27. September 2007 23:18:54 schrieb Jarod Wilson:

Quoted 9 lines
Quoted 2 lines · Stefan Eder

Hallo everyone,
ist there a chance for powersaving with the following CPU?

Yes.

Quoted 2 lines

And if so, what are
the related modules to load?

acpi-cpufreq for freq scaling support, cpufreq-ondemand for your governor (may be built-in though)

Quoted 6 lines

Hallo, tried this module on openSUSE 10.3 RC1:

modprobe acpi-cpufreq
FATAL: Error inserting acpi_cpufreq (/lib/modules/2.6.22.5-29-bigsmp/kernel/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.ko):
No such device

Boot with the added kernel param cpufreq.debug=7 and check dmesg after trying to load the module. Should say a bit more about what's going awry. It works fine under a Fedora 2.6.22.7 kernel, so I think your kernel should be fine, and I'm inclined to think its your BIOS at fault.

Signature · 2 lines
Jarod Wilson
[email protected]

_______________________________________________
Cpufreq mailing list
[email protected]
http://lists.linux.org.uk/mailman/listinfo/cpufreq

#7 lore raw
Quoted 11 lines · Jarod> Stefan Eder wrote:
Quoted 11 lines

Am Donnerstag, 27. September 2007 23:18:54 schrieb Jarod Wilson:

Quoted 9 lines
Quoted 2 lines · Stefan Eder

Hallo everyone,
ist there a chance for powersaving with the following CPU?

Yes.

Quoted 2 lines

And if so, what are
the related modules to load?

acpi-cpufreq for freq scaling support, cpufreq-ondemand for your governor (may be built-in though)

Quoted 6 lines
Quoted 6 lines

Hallo, tried this module on openSUSE 10.3 RC1:

modprobe acpi-cpufreq
FATAL: Error inserting acpi_cpufreq (/lib/modules/2.6.22.5-29-bigsmp/kernel/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.ko):
No such device

Jarod> Boot with the added kernel param cpufreq.debug=7 and check dmesg after Jarod> trying to load the module. Should say a bit more about what's going Jarod> awry. It works fine under a Fedora 2.6.22.7 kernel, so I think your Jarod> kernel should be fine, and I'm inclined to think its your BIOS at fault.

uname -a
Linux 2.6.22-gentoo-r5 #25 SMP ... i686 Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40Ghz

Added cpufreq.debug=7
modprobe acpi-cpufreq
FATAL: Error inserting acpi_cpufreq
(.../acpi-cpufreq.ko):
No such device

dmesg | grep freq
conf cpufreq.debug=7
acpi-cpufreq: acpi_cpufreq_init
acpi-cpufreq: acpi_cpufreq_early_init
cpufreq-core: trying to register friver acpi-cpufreq
cpufreq-core: adding CPU 0
acpi-cpufreq: acpi_cpufreq_cpu_init
cpufreq-core: initialization failed
.... same for CPU1,CPU2,CPU3
cpufreq-core: unregistering CPU0,CPU1,CPU2,CPU3

modprobe centrino-speedstep
cpufreq-core: trying to register driver centrino
cpufreq-core: adding CPU0
speedstep-centrino: found unsupported CPU with Enhanced SpeedStep:
send /proc/cpuinfo to [email protected]

Hardware: Intel DG33TL with latest BIOS.