Intel Core2Quad Q6600 2,4 GHz Socket775 FSB1066
Hallo everyone,
ist there a chance for powersaving with the following CPU? And if so, what are the related modules to load?
Thanks a lot
cpuid | grep SpeedStep
Enhanced Intel SpeedStep Technology = true
cat /proc/cpuinfo
processor : 0vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
stepping : 11
cpu MHz : 2393.984
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4fdiv_bug : nohlt_bug : nof00f_bug : nocoma_bug : no
fpu : yesfpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 4791.85
clflush size : 64
Hi, I have the same question. Tryed all powersaving modules, but
no one worked.
Stefan> Hallo everyone,
Stefan> ist there a chance for powersaving with the following CPU? And if so, what are Stefan> the related modules to load?
Stefan> Thanks a lot
Stefan> cpuid | grep SpeedStep
Stefan> Enhanced Intel SpeedStep Technology = true
Stefan> cat /proc/cpuinfo
Stefan> processor : 0 Stefan> vendor_id : GenuineIntel Stefan> cpu family : 6 Stefan> model : 15 Stefan> model name : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz Stefan> stepping : 11 Stefan> cpu MHz : 2393.984 Stefan> cache size : 4096 KB Stefan> physical id : 0 Stefan> siblings : 4 Stefan> core id : 0 Stefan> cpu cores : 4 Stefan> fdiv_bug : no Stefan> hlt_bug : no Stefan> f00f_bug : no Stefan> coma_bug : no Stefan> fpu : yes Stefan> fpu_exception : yes Stefan> cpuid level : 10 Stefan> wp : yes Stefan> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
Stefan> cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm Stefan> constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
Stefan> bogomips : 4791.85
Stefan> clflush size : 64
Quoted 2 lines · Stefan Eder
Hallo everyone,
ist there a chance for powersaving with the following CPU?
Yes.
Quoted 2 lines
And if so, what are
the related modules to load?
acpi-cpufreq for freq scaling support, cpufreq-ondemand for your governor (may be built-in though)
Signature · 2 lines
Jarod Wilson [email protected]
_______________________________________________
Cpufreq mailing list
[email protected]
http://lists.linux.org.uk/mailman/listinfo/cpufreq
Quoted 5 lines · [email protected] wrote:
Hi, I have the same question. Tryed all powersaving modules, but
no one worked.
Stefan> Hallo everyone,
Stefan> ist there a chance for powersaving with the following CPU? And if so, what are Stefan> the related modules to load?
acpi-cpufreq + cpufreq-ondemand works on the core2 quad I'm typing this on...
$ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Quad CPU @ 2.66GHz stepping : 7 cpu MHz : 1596.000 cache size : 4096 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 4 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm bogomips : 5335.65 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual
If it doesn't work for you, I'd probably blame your motherboard BIOS.
Signature · 2 lines
Jarod Wilson [email protected]
_______________________________________________
Cpufreq mailing list
[email protected]
http://lists.linux.org.uk/mailman/listinfo/cpufreq
Am Donnerstag, 27. September 2007 23:18:54 schrieb Jarod Wilson:
Quoted 11 lines
Quoted 2 lines · Stefan Eder
Hallo everyone,
ist there a chance for powersaving with the following CPU?Yes.
Quoted 2 lines
And if so, what are
the related modules to load?acpi-cpufreq for freq scaling support, cpufreq-ondemand for your governor (may be built-in though)
Hallo, tried this module on openSUSE 10.3 RC1:
modprobe acpi-cpufreq
FATAL: Error inserting acpi_cpufreq (/lib/modules/2.6.22.5-29-bigsmp/kernel/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.ko):
No such device
Thank you.
Quoted 22 lines
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Stefan Eder
Sent: Thursday, September 27, 2007 2:33 PM
To: [email protected]
Subject: Re: Intel Core2Quad Q6600 2,4 GHz Socket775 FSB1066Am Donnerstag, 27. September 2007 23:18:54 schrieb Jarod Wilson:
Quoted 11 lines
Quoted 2 lines · Stefan Eder
Hallo everyone,
ist there a chance for powersaving with the following CPU?Yes.
Quoted 2 lines
And if so, what are
the related modules to load?acpi-cpufreq for freq scaling support, cpufreq-ondemand for your governor (may be built-in though)
Quoted 8 lines
Hallo, tried this module on openSUSE 10.3 RC1:
modprobe acpi-cpufreq
FATAL: Error insertingacpi_cpufreq(/lib/modules/2.6.22.5-29-bigsmp/kernel/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.ko):
No such device
Depends on whether your BIOS is enabling this feature. Check in BIOS options for any switch related to this feature. Also make sure you have the latest BIOS for the platform.
Thanks,
Venki
Quoted 11 lines · Stefan Eder
Am Donnerstag, 27. September 2007 23:18:54 schrieb Jarod Wilson:
Quoted 9 lines
Quoted 2 lines · Stefan Eder
Hallo everyone,
ist there a chance for powersaving with the following CPU?Yes.
Quoted 2 lines
And if so, what are
the related modules to load?acpi-cpufreq for freq scaling support, cpufreq-ondemand for your governor (may be built-in though)
Quoted 6 lines
Hallo, tried this module on openSUSE 10.3 RC1:
modprobe acpi-cpufreq
FATAL: Error insertingacpi_cpufreq(/lib/modules/2.6.22.5-29-bigsmp/kernel/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.ko):
No such device
Boot with the added kernel param cpufreq.debug=7 and check dmesg after trying to load the module. Should say a bit more about what's going awry. It works fine under a Fedora 2.6.22.7 kernel, so I think your kernel should be fine, and I'm inclined to think its your BIOS at fault.
Signature · 2 lines
Jarod Wilson [email protected]
_______________________________________________
Cpufreq mailing list
[email protected]
http://lists.linux.org.uk/mailman/listinfo/cpufreq
Quoted 11 lines · Jarod> Stefan Eder wrote:
Quoted 11 lines
Am Donnerstag, 27. September 2007 23:18:54 schrieb Jarod Wilson:
Quoted 9 lines
Quoted 2 lines · Stefan Eder
Hallo everyone,
ist there a chance for powersaving with the following CPU?Yes.
Quoted 2 lines
And if so, what are
the related modules to load?acpi-cpufreq for freq scaling support, cpufreq-ondemand for your governor (may be built-in though)
Quoted 6 lines
Quoted 6 lines
Hallo, tried this module on openSUSE 10.3 RC1:
modprobe acpi-cpufreq
FATAL: Error insertingacpi_cpufreq(/lib/modules/2.6.22.5-29-bigsmp/kernel/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.ko):
No such device
Jarod> Boot with the added kernel param cpufreq.debug=7 and check dmesg after Jarod> trying to load the module. Should say a bit more about what's going Jarod> awry. It works fine under a Fedora 2.6.22.7 kernel, so I think your Jarod> kernel should be fine, and I'm inclined to think its your BIOS at fault.
uname -a
Linux 2.6.22-gentoo-r5 #25 SMP ... i686 Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40Ghz
Added cpufreq.debug=7
modprobe acpi-cpufreq
FATAL: Error inserting acpi_cpufreq
(.../acpi-cpufreq.ko):
No such device
dmesg | grep freq
conf cpufreq.debug=7
acpi-cpufreq: acpi_cpufreq_init
acpi-cpufreq: acpi_cpufreq_early_init
cpufreq-core: trying to register friver acpi-cpufreq
cpufreq-core: adding CPU 0
acpi-cpufreq: acpi_cpufreq_cpu_init
cpufreq-core: initialization failed
.... same for CPU1,CPU2,CPU3
cpufreq-core: unregistering CPU0,CPU1,CPU2,CPU3
modprobe centrino-speedstep
cpufreq-core: trying to register driver centrino
cpufreq-core: adding CPU0
speedstep-centrino: found unsupported CPU with Enhanced SpeedStep:
send /proc/cpuinfo to [email protected]
Hardware: Intel DG33TL with latest BIOS.