DT: Add documentation for gp2ap020a00f sensor
Subsystems (2)
PATCH v6 1/2 DT: Add documentation for gp2ap020a00f sensor
This patch adds device tree binding documentation
for the gp2ap020a00f proximity/als sensor.
Signed-off-by Jacek Anaszewski <[email protected]>
Signed-off-by Kyungmin Park <[email protected]>
--- .../devicetree/bindings/iio/light/gp2ap020a00f.txt | 21 ++++++++++++++++++++ 1 files changed, 21 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/iio/light/gp2ap020a00f.txt
Documentation/devicetree/bindings/iio/light/gp2ap020a00f.txt new file +21 -0
@@ -0,0 +1,21 @@ +* Sharp GP2AP020A00F I2C Proximity/ALS sensor + +The proximity detector sensor requires power supply +for its built-in led. It is also defined by this binding. + +Required properties: + + - compatible : should be "sharp,gp2ap020a00f" + - reg : the I2C slave address of the light sensor + - interrupts : interrupt specifier for the sole interrupt generated + by the device + - vled-supply : VLED power supply, as covered in ../regulator/regulator.txt + +Example: + +gp2ap020a00f@39 { + compatible = "sharp,gp2ap020a00f"; + reg = <0x39>; + interrupts = <2 0>; + vled-supply = <...>; +};
Signature · 1 line
1.7.5.4
Quoted 2 lines · Jacek Anaszewski
This patch adds device tree binding documentation
for the gp2ap020a00f proximity/als sensor.
Acked-by Stephen Warren <[email protected]>
A message that is not in the archive (sent off-list or not yet received): [email protected]
Jonathan Cameron
AppliedQuoted 6 lines · Stephen Warren
Quoted 2 lines · Jacek Anaszewski
This patch adds device tree binding documentation
for the gp2ap020a00f proximity/als sensor.Acked-by Stephen Warren <[email protected]>
Applied to the togreg branch of iio.git
(now the driver is ready to go with it!)