Skip to contentSkip to conversation

DT: Add documentation for gp2ap020a00f sensor

PATCH Applied Jacek Anaszewski 3 participants 3 messages Aug 21, 2013 – Sep 15, 2013 1 message not in the archive

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v6 1/2 DT: Add documentation for gp2ap020a00f sensor

This patch adds device tree binding documentation
for the gp2ap020a00f proximity/als sensor.

---
 .../devicetree/bindings/iio/light/gp2ap020a00f.txt |   21 ++++++++++++++++++++
 1 files changed, 21 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iio/light/gp2ap020a00f.txt
Documentation/devicetree/bindings/iio/light/gp2ap020a00f.txt new file +21 -0
new file mode 100644
index 0000000..9231c82
@@ -0,0 +1,21 @@
+* Sharp GP2AP020A00F I2C Proximity/ALS sensor
+
+The proximity detector sensor requires power supply
+for its built-in led. It is also defined by this binding.
+
+Required properties:
+
+  - compatible : should be "sharp,gp2ap020a00f"
+  - reg : the I2C slave address of the light sensor
+  - interrupts : interrupt specifier for the sole interrupt generated
+		 by the device
+  - vled-supply : VLED power supply, as covered in ../regulator/regulator.txt
+
+Example:
+
+gp2ap020a00f@39 {
+	compatible = "sharp,gp2ap020a00f";
+	reg = <0x39>;
+	interrupts = <2 0>;
+	vled-supply = <...>;
+};
Signature · 1 line
1.7.5.4

A message that is not in the archive (sent off-list or not yet received): [email protected]

#3 lore raw
Quoted 6 lines · Stephen Warren
Quoted 2 lines · Jacek Anaszewski

This patch adds device tree binding documentation
for the gp2ap020a00f proximity/als sensor.

Applied to the togreg branch of iio.git
(now the driver is ready to go with it!)