Skip to contentSkip to conversation

beagleboard/mpc8315e-rdb: upgrade u-boot to the latest version

PATCH New Liming Wang 1 participant 3 messages Sep 4, 2013

lore
Share & tools
lore
#0 lore raw

cover beagleboard/mpc8315e-rdb: upgrade u-boot to the latest version

Richard/Saul,

The following patches are to upgrade u-boot to the latest version, 2013.07. We have tested the u-boot on both boards and it works well. These two patches are to fix bug of bugzilla 5077.

Liming Wang

#1 lore raw

PATCH 1/2 beagleboard: upgrade u-boot to the latest version

Now the latest version of u-boot is 2013.07 and it depends on its own MLO, instead of x-load, as the Second Program Loader. So remove x-load and use u-boot's MLO.

And also replace u-boot.bin with u-boot.img as the u-boot image file.

---
 meta-yocto-bsp/conf/machine/beagleboard.conf |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
meta-yocto-bsp/conf/machine/beagleboard.conf +3 -1
index 6633880..5f4c55a 100644
@@ -13,7 +13,7 @@ XSERVER ?= "xserver-xorg \
 MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
 
 # Allow for MMC booting (required by the NAND-less Beagleboard XM)
-EXTRA_IMAGEDEPENDS += "u-boot x-load"
+EXTRA_IMAGEDEPENDS += "u-boot"
 
 # Uncomment the following line to enable the hard floating point abi. Note that
 # this breaks some binary libraries and 3D (neither of which ship with
@@ -33,6 +33,8 @@ PREFERRED_VERSION_linux-yocto ?= "3.4%"
 
 KERNEL_IMAGETYPE = "uImage"
 
+SPL_BINARY = "MLO"
+UBOOT_SUFFIX = "img"
 UBOOT_MACHINE = "omap3_beagle_config"
 UBOOT_ENTRYPOINT = "0x80008000"
 UBOOT_LOADADDRESS = "0x80008000"
Signature · 1 line
1.7.9.5
#2 lore raw

PATCH 2/2 mpc8315e-rdb: Set PREFFERED_VERSION to 2013.07

In reply to Liming Wang

Now the latest u-boot, v2013.07, works well on the board. So set PREFERRED_VERSION to use the latest u-boot.

---
 meta-yocto-bsp/conf/machine/mpc8315e-rdb.conf |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
meta-yocto-bsp/conf/machine/mpc8315e-rdb.conf +1 -1
index cf767f5..3e984a7 100644
@@ -22,7 +22,7 @@ XSERVER ?= "xserver-xorg \
             xf86-input-evdev \
             xf86-video-fbdev"
 
-PREFERRED_VERSION_u-boot ?= "v2011.06%"
+PREFERRED_VERSION_u-boot ?= "v2013.07%"
 UBOOT_ENTRYPOINT = "0x00000000"
 
 KERNEL_DEVICETREE = "${S}/arch/powerpc/boot/dts/mpc8315erdb.dts"
Signature · 1 line
1.7.9.5