Skip to contentSkip to conversation

regulator: palmas: fix the n_voltages for smps to 122

PATCH Applied Laxman Dewangan 2 participants 2 messages Sep 4, 2013

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 regulator: palmas: fix the n_voltages for smps to 122

With the following change
---------
commit ad02e846878ca35e9d3fa584be8ee770e9e14fce
Author: Axel Lin <[email protected]>

regulator: palmas: Return raw register values as the selectors in [get|set]_voltage_sel

Don't adjust the selector in [get|set]_voltage_sel, fix it in list_voltage() instead.

For smps*(except smps10), the vsel reg-value and voltage mapping as below:
----------
The list_voltage() takes the true value of selector which is programmed in the register. As per smsp voltage table

    reg-value       volt (uV) ( Assume RANGE is x1 )
    0               0
    1               500000
    2               500000
    3               500000
    4               500000
    5               500000
    6               500000 (0.49V + 1 * 0.01V) * RANGE
    7               510000 (0.49V + 2 * 0.01V) * RANGE
    8               520000 (0.49V + 3 * 0.01V) * RANGE
    9               530000 (0.49V + 4 * 0.01V) * RANGE
    ....
    121            1650000 (0.49V + 116 * 0.1) * RANGE

Hence making n_voltages for smps to 122.

---
 drivers/regulator/palmas-regulator.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/regulator/palmas-regulator.c +1 -1
index 488dfe7..cb65c6f 100644
@@ -207,7 +207,7 @@ static unsigned int palmas_smps_ramp_delay[4] = {0, 10000, 5000, 2500};
  *
  * So they are basically (maxV-minV)/stepV
  */
-#define PALMAS_SMPS_NUM_VOLTAGES	117
+#define PALMAS_SMPS_NUM_VOLTAGES	122
 #define PALMAS_SMPS10_NUM_VOLTAGES	2
 #define PALMAS_LDO_NUM_VOLTAGES		50
 
Signature · 1 line
1.7.1.1
maintainer Applied
#1 lore raw
Quoted 4 lines · Laxman Dewangan

With the following change
---------
commit ad02e846878ca35e9d3fa584be8ee770e9e14fce
Author: Axel Lin <[email protected]>

Applied, thanks. There is no need to include the entire commit message, just the summary will do.