regulator: palmas: fix the n_voltages for smps to 122
Subsystems (2)
PATCH 1/1 regulator: palmas: fix the n_voltages for smps to 122
With the following change
---------
commit ad02e846878ca35e9d3fa584be8ee770e9e14fce
Author: Axel Lin <[email protected]>
regulator: palmas: Return raw register values as the selectors in [get|set]_voltage_sel
Don't adjust the selector in [get|set]_voltage_sel, fix it in list_voltage() instead.
For smps*(except smps10), the vsel reg-value and voltage mapping as below:
----------
The list_voltage() takes the true value of selector which is programmed in the register. As per smsp voltage table
reg-value volt (uV) ( Assume RANGE is x1 )
0 0
1 500000
2 500000
3 500000
4 500000
5 500000
6 500000 (0.49V + 1 * 0.01V) * RANGE
7 510000 (0.49V + 2 * 0.01V) * RANGE
8 520000 (0.49V + 3 * 0.01V) * RANGE
9 530000 (0.49V + 4 * 0.01V) * RANGE
....
121 1650000 (0.49V + 116 * 0.1) * RANGEHence making n_voltages for smps to 122.
--- drivers/regulator/palmas-regulator.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/regulator/palmas-regulator.c +1 -1
@@ -207,7 +207,7 @@ static unsigned int palmas_smps_ramp_delay[4] = {0, 10000, 5000, 2500};* * So they are basically (maxV-minV)/stepV */ -#define PALMAS_SMPS_NUM_VOLTAGES 117 +#define PALMAS_SMPS_NUM_VOLTAGES 122#define PALMAS_SMPS10_NUM_VOLTAGES 2#define PALMAS_LDO_NUM_VOLTAGES 50
Signature · 1 line
1.7.1.1
Quoted 4 lines · Laxman Dewangan
With the following change
---------
commitad02e846878ca35e9d3fa584be8ee770e9e14fce
Author: Axel Lin <[email protected]>
Applied, thanks. There is no need to include the entire commit message, just the summary will do.