arm64 patch
Subsystems (2)
v10 cover arm64 patch
From: David Feng <[email protected]>
Changes for v10:
- add weak definition to include/linux/linkage.h and make setup_el2/setup_el3/lowlevel_init weak routines, so them can be easily overridden by processor specific code.
- modify s-o-f of 0002-board-support-of-vexpress_aemv8a which use wrong mail address of Bhupesh Sharma.
Changes for v9:
- add Signed-off-by information to patch "board support of vexpress_aemv8a" which SMC91111 support is integrated from Sharma Bhupesh's patch.
- adjust pt_regs struct and add exception state preservation in exception.S.
Changes for v8:
- Integrate SMC91111 patch of sharma bhupesh.
- remove v8_outer_cache* which is not need currently.
- Change license tag.
- Mov crt0.S/relocate.S/interrupts.c to arm/lib and rename them with _64 suffix.
- Make el3/el2 initializing process of start.S as two separate routines. It could be easier to be replaced with processor specific codes.
- Remove exception stack save and restore routine, it is unnecessary now.
- simplify __weak function declaration.
Changes for v7:
- Check the patches with checkpatch.pl and get rid of almost all warnings. There are a few warnings still, but I think it should be that.
- change printf format in cmd_pxe.c, use %zd indtead of %ld to format size_t type variable.
- add macro PGTABLE_SIZE to identify tlb table size.
Changes for v6:
- Make modification to inappropriate licensed file and bugs according to ScottWood's advice. Thanks Scott for his checking to these patches.
- Enable u-boot's running at EL1.
- Get rid of compiling warnings originated from cmd_pxe.c.
Changes for v5:
- fix the generic board_f.c, remove zero_global_data from init_sequence_f array and move it to board_init_f() function with CONFIG_X86 switch. The previous fixup is inaccurate.
- Replace __ARMEB__ with __AARCH64EB__ in byteorder.h and unaligned.h, gcc for aarch64 use __AARCH64EB__ and __AARCH64EL__ to identify endian.
- Some modification to README.armv8
Changes for v4:
- merge arm64 to arm architecture.
David Feng (6):
core support of arm64
board support of vexpress_aemv8a
generic board patch of manual reloc and zero gd_t 64bit initrd start address support
remove compiling warnings
add weak entry definition
MAINTAINERS | 4 + arch/arm/config.mk | 4 + arch/arm/cpu/armv8/Makefile | 38 +++ arch/arm/cpu/armv8/cache.S | 130 +++++++++ arch/arm/cpu/armv8/cache_v8.c | 228 ++++++++++++++++ arch/arm/cpu/armv8/config.mk | 16 ++ arch/arm/cpu/armv8/cpu.c | 67 +++++ arch/arm/cpu/armv8/exceptions.S | 115 ++++++++ arch/arm/cpu/armv8/start.S | 238 +++++++++++++++++ arch/arm/cpu/armv8/timer.c | 80 ++++++ arch/arm/cpu/armv8/tlb.S | 30 +++ arch/arm/cpu/armv8/u-boot.lds | 71 +++++ arch/arm/include/asm/arch-armv8/gpio.h | 11 + arch/arm/include/asm/arch-armv8/mmu.h | 106 ++++++++ arch/arm/include/asm/byteorder.h | 12 + arch/arm/include/asm/cache.h | 5 + arch/arm/include/asm/config.h | 10 + arch/arm/include/asm/global_data.h | 6 +- arch/arm/include/asm/io.h | 15 +- arch/arm/include/asm/macro.h | 20 ++ arch/arm/include/asm/posix_types.h | 10 + arch/arm/include/asm/proc-armv/ptrace.h | 21 ++ arch/arm/include/asm/proc-armv/system.h | 59 ++++- arch/arm/include/asm/system.h | 77 ++++++ arch/arm/include/asm/types.h | 4 + arch/arm/include/asm/u-boot.h | 4 + arch/arm/include/asm/unaligned.h | 2 +- arch/arm/lib/Makefile | 14 + arch/arm/lib/board.c | 16 +- arch/arm/lib/bootm.c | 16 ++ arch/arm/lib/crt0_64.S | 116 ++++++++ arch/arm/lib/interrupts_64.c | 120 +++++++++ arch/arm/lib/relocate_64.S | 57 ++++ board/armltd/dts/vexpress64.dts | 439 +++++++++++++++++++++++++++++++ board/armltd/vexpress64/Makefile | 27 ++ board/armltd/vexpress64/vexpress64.c | 70 +++++ boards.cfg | 1 + common/board_f.c | 18 +- common/board_r.c | 18 ++ common/cmd_pxe.c | 4 +- common/fdt_support.c | 66 ++--- common/image.c | 1 + doc/README.armv8 | 18 ++ examples/standalone/stubs.c | 15 ++ include/configs/vexpress_aemv8a.h | 191 ++++++++++++++ include/image.h | 1 + include/linux/linkage.h | 4 + 47 files changed, 2544 insertions(+), 51 deletions(-) create mode 100644 arch/arm/cpu/armv8/Makefile create mode 100644 arch/arm/cpu/armv8/cache.S create mode 100644 arch/arm/cpu/armv8/cache_v8.c create mode 100644 arch/arm/cpu/armv8/config.mk create mode 100644 arch/arm/cpu/armv8/cpu.c create mode 100644 arch/arm/cpu/armv8/exceptions.S create mode 100644 arch/arm/cpu/armv8/start.S create mode 100644 arch/arm/cpu/armv8/timer.c create mode 100644 arch/arm/cpu/armv8/tlb.S create mode 100644 arch/arm/cpu/armv8/u-boot.lds create mode 100644 arch/arm/include/asm/arch-armv8/gpio.h create mode 100644 arch/arm/include/asm/arch-armv8/mmu.h create mode 100644 arch/arm/lib/crt0_64.S create mode 100644 arch/arm/lib/interrupts_64.c create mode 100644 arch/arm/lib/relocate_64.S create mode 100644 board/armltd/dts/vexpress64.dts create mode 100644 board/armltd/vexpress64/Makefile create mode 100644 board/armltd/vexpress64/vexpress64.c create mode 100644 doc/README.armv8 create mode 100644 include/configs/vexpress_aemv8a.h
Signature · 1 line
1.7.9.5
PATCH v10 1/6 core support of arm64
From: David Feng <[email protected]>
--- arch/arm/config.mk | 4 + arch/arm/cpu/armv8/Makefile | 38 +++++ arch/arm/cpu/armv8/cache.S | 130 +++++++++++++++++ arch/arm/cpu/armv8/cache_v8.c | 228 +++++++++++++++++++++++++++++ arch/arm/cpu/armv8/config.mk | 16 +++ arch/arm/cpu/armv8/cpu.c | 67 +++++++++ arch/arm/cpu/armv8/exceptions.S | 115 +++++++++++++++ arch/arm/cpu/armv8/start.S | 238 +++++++++++++++++++++++++++++++ arch/arm/cpu/armv8/timer.c | 80 +++++++++++ arch/arm/cpu/armv8/tlb.S | 30 ++++ arch/arm/cpu/armv8/u-boot.lds | 71 +++++++++ arch/arm/include/asm/arch-armv8/gpio.h | 11 ++ arch/arm/include/asm/arch-armv8/mmu.h | 106 ++++++++++++++ arch/arm/include/asm/byteorder.h | 12 ++ arch/arm/include/asm/cache.h | 5 + arch/arm/include/asm/config.h | 10 ++ arch/arm/include/asm/global_data.h | 6 +- arch/arm/include/asm/io.h | 15 +- arch/arm/include/asm/macro.h | 20 +++ arch/arm/include/asm/posix_types.h | 10 ++ arch/arm/include/asm/proc-armv/ptrace.h | 21 +++ arch/arm/include/asm/proc-armv/system.h | 59 +++++++- arch/arm/include/asm/system.h | 77 ++++++++++ arch/arm/include/asm/types.h | 4 + arch/arm/include/asm/u-boot.h | 4 + arch/arm/include/asm/unaligned.h | 2 +- arch/arm/lib/Makefile | 14 ++ arch/arm/lib/board.c | 16 ++- arch/arm/lib/bootm.c | 16 +++ arch/arm/lib/crt0_64.S | 116 +++++++++++++++ arch/arm/lib/interrupts_64.c | 120 ++++++++++++++++ arch/arm/lib/relocate_64.S | 57 ++++++++ common/image.c | 1 + doc/README.armv8 | 18 +++ examples/standalone/stubs.c | 15 ++ include/image.h | 1 + 36 files changed, 1743 insertions(+), 10 deletions(-) create mode 100644 arch/arm/cpu/armv8/Makefile create mode 100644 arch/arm/cpu/armv8/cache.S create mode 100644 arch/arm/cpu/armv8/cache_v8.c create mode 100644 arch/arm/cpu/armv8/config.mk create mode 100644 arch/arm/cpu/armv8/cpu.c create mode 100644 arch/arm/cpu/armv8/exceptions.S create mode 100644 arch/arm/cpu/armv8/start.S create mode 100644 arch/arm/cpu/armv8/timer.c create mode 100644 arch/arm/cpu/armv8/tlb.S create mode 100644 arch/arm/cpu/armv8/u-boot.lds create mode 100644 arch/arm/include/asm/arch-armv8/gpio.h create mode 100644 arch/arm/include/asm/arch-armv8/mmu.h create mode 100644 arch/arm/lib/crt0_64.S create mode 100644 arch/arm/lib/interrupts_64.c create mode 100644 arch/arm/lib/relocate_64.S create mode 100644 doc/README.armv8
arch/arm/config.mk +4 -0
@@ -74,7 +74,9 @@ endif endif # needed for relocation +ifndef CONFIG_ARMV8 LDFLAGS_u-boot += -pie +endif # # FIXME: binutils versions < 2.22 have a bug in the assembler where
@@ -95,6 +97,8 @@ endif endif # check that only R_ARM_RELATIVE relocations are generated +ifndef CONFIG_ARMV8 ifneq ($(CONFIG_SPL_BUILD),y) ALL-y += checkarmreloc endif +endif
arch/arm/cpu/armv8/Makefile new file +38 -0
@@ -0,0 +1,38 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd at denx.de. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(CPU).o + +START := start.o + +COBJS += cpu.o +COBJS += timer.o +COBJS += cache_v8.o + +SOBJS += exceptions.o +SOBJS += cache.o +SOBJS += tlb.o + +SRCS := $(START:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +#########################################################################
arch/arm/cpu/armv8/cache.S new file +130 -0
130 lines not on this page · raw message
arch/arm/cpu/armv8/cache_v8.c new file +228 -0
228 lines not on this page · raw message
arch/arm/cpu/armv8/config.mk new file +16 -0
@@ -0,0 +1,16 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <[email protected]> +# +# SPDX-License-Identifier: GPL-2.0+ +# +PLATFORM_RELFLAGS += -fno-common -ffixed-x18 + +# SEE README.arm-unaligned-accesses +PF_NO_UNALIGNED := $(call cc-option, -mstrict-align) +PLATFORM_NO_UNALIGNED := $(PF_NO_UNALIGNED) + +PF_CPPFLAGS_ARMV8 := $(call cc-option, -march=armv8-a) +PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARMV8) +PLATFORM_CPPFLAGS += $(PF_NO_UNALIGNED) +PLATFORM_CPPFLAGS += -fpic
arch/arm/cpu/armv8/cpu.c new file +67 -0
67 lines not on this page · raw message
arch/arm/cpu/armv8/exceptions.S new file +115 -0
115 lines not on this page · raw message
arch/arm/cpu/armv8/start.S new file +238 -0
238 lines not on this page · raw message
arch/arm/cpu/armv8/timer.c new file +80 -0
80 lines not on this page · raw message
arch/arm/cpu/armv8/tlb.S new file +30 -0
@@ -0,0 +1,30 @@ +/* + * (C) Copyright 2013 + * David Feng <[email protected]> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm-offsets.h> +#include <config.h> +#include <version.h> +#include <linux/linkage.h> +#include <asm/macro.h> + +/* + * void __asm_invalidate_tlb_all(void) + * + * invalidate all tlb entries. + */ +ENTRY(__asm_invalidate_tlb_all) + switch_el1_el2 x9, 1f, 2f, 3f +1: tlbi vmalle1 + dsb sy + isb + b 3f +2: tlbi alle2 + dsb sy + isb +3: + ret +ENDPROC(__asm_invalidate_tlb_all)
arch/arm/cpu/armv8/u-boot.lds new file +71 -0
71 lines not on this page · raw message
arch/arm/include/asm/arch-armv8/gpio.h new file +11 -0
@@ -0,0 +1,11 @@ +/* +* (C) Copyright 2013 +* David Feng <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#ifndef _ASM_ARMV8_GPIO_H_ +#define _ASM_ARMV8_GPIO_H_ + +#endif /* _ASM_ARMV8_GPIO_H_ */
arch/arm/include/asm/arch-armv8/mmu.h new file +106 -0
106 lines not on this page · raw message
arch/arm/include/asm/byteorder.h +12 -0
@@ -23,10 +23,22 @@# define __SWAB_64_THRU_32__#endif +#ifdef CONFIG_ARMV8 + +#ifdef __AARCH64EB__ +#include <linux/byteorder/big_endian.h> +#else +#include <linux/byteorder/little_endian.h> +#endif + +#else /* CONFIG_ARMV8 */ +#ifdef __ARMEB__#include <linux/byteorder/big_endian.h> #else #include <linux/byteorder/little_endian.h> #endif +#endif /* CONFIG_ARMV8 */ +#endif
arch/arm/include/asm/cache.h +5 -0
@@ -11,6 +11,8 @@#include <asm/system.h> +#ifndef CONFIG_ARMV8 +/* * Invalidate L2 Cache using co-proc instruction */
@@ -28,6 +30,9 @@ void l2_cache_disable(void);void set_section_dcache (int section,enum dcache_option option);void dram_bank_mmu_setup (int bank); + +#endif +/* * The current upper bound for ARM L1 data cache line sizes is 64 bytes. We * use that value for aligning DMA buffers unless the board config has specified
arch/arm/include/asm/config.h +10 -0
@@ -9,4 +9,14 @@#define CONFIG_LMB #define CONFIG_SYS_BOOT_RAMDISK_HIGH + +#ifdef CONFIG_ARMV8 +/* +* Currently, GOT is used to relocate u-boot and +* configuration CONFIG_NEEDS_MANUAL_RELOC is needed. +*/ +#define CONFIG_NEEDS_MANUAL_RELOC +#define CONFIG_PHYS_64BIT +#endif +#endif
arch/arm/include/asm/global_data.h +5 -1
@@ -47,6 +47,10 @@ struct arch_global_data {#include <asm-generic/global_data.h> -#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r8") +#ifdef CONFIG_ARMV8 +#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("x18") +#else +#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r8") +#endif #endif /* __ASM_GBL_DATA_H */
arch/arm/include/asm/io.h +9 -6
@@ -75,42 +75,45 @@ static inline phys_addr_t virt_to_phys(void * vaddr)#define __arch_putw (v,a) (*(volatile unsigned short *)(a) = (v))#define __arch_putl (v,a) (*(volatile unsigned int *)(a) = (v)) -extern inline void __raw_writesb (unsigned int addr,const void *data,int bytelen) +extern inline void __raw_writesb (unsigned long addr,const void *data, +int bytelen) {uint8_t *buf = (uint8_t *)data;while (bytelen--)__arch_putb (*buf++, addr); } -extern inline void __raw_writesw (unsigned int addr,const void *data,int wordlen) +extern inline void __raw_writesw (unsigned long addr,const void *data, +int wordlen) {uint16_t *buf = (uint16_t *)data;while (wordlen--)__arch_putw (*buf++, addr); } -extern inline void __raw_writesl (unsigned int addr,const void *data,int longlen) +extern inline void __raw_writesl (unsigned long addr,const void *data, +int longlen) {uint32_t *buf = (uint32_t *)data;while (longlen--)__arch_putl (*buf++, addr); } -extern inline void __raw_readsb (unsigned int addr,void *data,int bytelen) +extern inline void __raw_readsb (unsigned long addr,void *data,int bytelen) {uint8_t *buf = (uint8_t *)data;while (bytelen--) *buf++ =__arch_getb (addr); } -extern inline void __raw_readsw (unsigned int addr,void *data,int wordlen) +extern inline void __raw_readsw (unsigned long addr,void *data,int wordlen) {uint16_t *buf = (uint16_t *)data;while (wordlen--) *buf++ =__arch_getw (addr); } -extern inline void __raw_readsl (unsigned int addr,void *data,int longlen) +extern inline void __raw_readsl (unsigned long addr,void *data,int longlen) {uint32_t *buf = (uint32_t *)data;while (longlen--)
arch/arm/include/asm/macro.h +20 -0
@@ -54,5 +54,25 @@ bcs 1b .endm +#ifdef CONFIG_ARMV8 +/* + * Register aliases. + */ +lr .req x30 + +/* + * Branch according to exception level + */ +.macro switch_el1_el2, xreg, el1_label, el2_label, fail_label + mrs \xreg, CurrentEL + cmp \xreg, 0x4 + b.eq \el1_label + cmp \xreg, 0x8 + b.eq \el2_label + b \fail_label +.endm + +#endif /* CONFIG_ARMV8 */ + #endif /* __ASSEMBLY__ */ #endif /* __ASM_ARM_MACRO_H__ */
arch/arm/include/asm/posix_types.h +10 -0
@@ -13,6 +13,8 @@#ifndef __ARCH_ARM_POSIX_TYPES_H#define __ARCH_ARM_POSIX_TYPES_H +#include <config.h> +/* * This file is generally used by user-level software, so you need to * be a little careful about namespace pollution etc. Also, we cannot
@@ -28,9 +30,17 @@ typedef int __kernel_pid_t;typedef unsigned short __kernel_ipc_pid_t ;typedef unsigned short __kernel_uid_t ;typedef unsigned short __kernel_gid_t ; + +#ifdef CONFIG_ARMV8 +typedef unsigned long __kernel_size_t ; +typedef long __kernel_ssize_t ; +typedef long __kernel_ptrdiff_t ; +#else /* CONFIG_ARMV8 */ typedef unsigned int __kernel_size_t ;typedef int __kernel_ssize_t ;typedef int __kernel_ptrdiff_t ; +#endif /* CONFIG_ARMV8 */ +typedef long __kernel_time_t ;typedef long __kernel_suseconds_t ;typedef long __kernel_clock_t ;
arch/arm/include/asm/proc-armv/ptrace.h +21 -0
@@ -12,6 +12,25 @@#include <linux/config.h> +#ifdef CONFIG_ARMV8 + +#define PCMASK 0 + +#ifndef __ASSEMBLY__ + +/* +* This struct defines the way the registers are stored +* on the stack during an exception. +*/ +struct pt_regs { +unsigned long elr; +unsigned long regs[31 ]; +}; + +#endif /* __ASSEMBLY__ */ + +#else /* CONFIG_ARMV8 */ +#define USR26_MODE 0x00#define FIQ26_MODE 0x01#define IRQ26_MODE 0x02
@@ -106,4 +125,6 @@ static inline int valid_user_regs(struct pt_regs *regs)#endif /* __ASSEMBLY__ */ +#endif /* CONFIG_ARMV8 */ +#endif
arch/arm/include/asm/proc-armv/system.h +58 -1
71 lines not on this page · raw message
arch/arm/include/asm/system.h +77 -0
93 lines not on this page · raw message
arch/arm/include/asm/types.h +4 -0
@@ -39,7 +39,11 @@ typedef unsigned int u32;typedef signed long long s64 ;typedef unsigned long long u64 ; +#ifdef CONFIG_ARMV8 +#define BITS_PER_LONG 64 +#else /* CONFIG_ARMV8 */ #define BITS_PER_LONG 32 +#endif /* CONFIG_ARMV8 */ /* Dma addresses are 32-bits wide. */
arch/arm/include/asm/u-boot.h +4 -0
@@ -44,6 +44,10 @@ typedef struct bd_info {#endif /* !CONFIG_SYS_GENERIC_BOARD */ /* For image.h:image_check_target_arch() */ +#ifndef CONFIG_ARMV8 #define IH_ARCH_DEFAULT IH_ARCH_ARM +#else +#define IH_ARCH_DEFAULT IH_ARCH_ARM64 +#endif #endif /* _U_BOOT_H_ */
arch/arm/include/asm/unaligned.h +1 -1
@@ -8,7 +8,7 @@/* * Select endianness */ -#ifndef __ARMEB__ +#if __BYTE_ORDER == __LITTLE_ENDIAN#define get_unaligned __get_unaligned_le#define put_unaligned __put_unaligned_le#else
arch/arm/lib/Makefile +14 -0
@@ -10,6 +10,9 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(ARCH).o LIBGCC = $(obj)libgcc.o +ifdef CONFIG_ARMV8 +SOBJS-y += crt0_64.o +else GLSOBJS += _ashldi3.o GLSOBJS += _ashrdi3.o GLSOBJS += _divsi3.o
@@ -21,9 +24,14 @@ GLSOBJS += _umodsi3.o GLCOBJS += div0.o SOBJS-y += crt0.o +endif ifndef CONFIG_SPL_BUILD +ifdef CONFIG_ARMV8 +SOBJS-y += relocate_64.o +else SOBJS-y += relocate.o +endif ifndef CONFIG_SYS_GENERIC_BOARD COBJS-y += board.o endif
@@ -38,11 +46,17 @@ else COBJS-$(CONFIG_SPL_FRAMEWORK) += spl.o endif +ifdef CONFIG_ARMV8 +COBJS-y += interrupts_64.o +else COBJS-y += interrupts.o +endif COBJS-y += reset.o COBJS-y += cache.o +ifndef CONFIG_ARMV8 COBJS-y += cache-cp15.o +endif SRCS := $(GLSOBJS:.o=.S) $(GLCOBJS:.o=.c) \ $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
arch/arm/lib/board.c +15 -1
@@ -344,7 +344,7 @@ void board_init_f(ulong bootflag)#if !(defined(CONFIG_SYS_ICACHE_OFF ) && defined(CONFIG_SYS_DCACHE_OFF ))/* reserve TLB table */ - gd->arch.tlb_size =4096 *4 ; + gd->arch.tlb_size =PGTABLE_SIZE ; addr -= gd->arch.tlb_size;/* round down to next 64 kB limit */
@@ -419,6 +419,7 @@ void board_init_f(ulong bootflag) }#endif +#ifndef CONFIG_ARMV8 /* setup stackpointer for exeptions */ gd->irq_sp = addr_sp;#ifdef CONFIG_USE_IRQ
@@ -431,6 +432,10 @@ void board_init_f(ulong bootflag)/* 8-byte alignment for ABI compliance */ addr_sp &= ~0x07 ; +#else /* CONFIG_ARMV8 */ +/* 16-byte alignment for ABI compliance */ + addr_sp &= ~0x0f ; +#endif /* CONFIG_ARMV8 */ #else addr_sp +=128 ;/* leave 32 words for abort-stack */ gd->irq_sp = addr_sp;
@@ -523,6 +528,15 @@ void board_init_r(gd_t *id, ulong dest_addr)debug ("monitor flash len: %08lX\n" , monitor_flash_len);board_init ();/* Setup chipselects */ + +#ifdef CONFIG_NEEDS_MANUAL_RELOC +/* +* We have to relocate the command table manually +*/ +fixup_cmdtable (ll_entry_start (cmd_tbl_t, cmd), +ll_entry_count (cmd_tbl_t, cmd)); +#endif /* CONFIG_NEEDS_MANUAL_RELOC */ +/* * TODO: printing of the clock inforamtion of the board is now * implemented as part of bdinfo command. Currently only support for
arch/arm/lib/bootm.c +16 -0
@@ -222,6 +222,21 @@ static void boot_prep_linux(bootm_headers_t *images)/* Subcommand: GO */ static void boot_jump_linux (bootm_headers_t *images,int flag) { +#ifdef CONFIG_ARMV8 +void (*kernel_entry)(void *fdt_addr); +int fake = (flag &BOOTM_STATE_OS_FAKE_GO ); + + kernel_entry = (void (*)(void *fdt_addr))images->ep; + +debug ("## Transferring control to Linux (at address %lx)...\n" , + (ulong ) kernel_entry); +bootstage_mark (BOOTSTAGE_ID_RUN_OS ); + +announce_and_cleanup (fake); + +if (!fake) +kernel_entry (images->ft_addr); +#else unsigned long machid = gd->bd->bi_arch_number;char *s;void (*kernel_entry)(int zero,int arch,uint params);
@@ -248,6 +263,7 @@ static void boot_jump_linux(bootm_headers_t *images, int flag)if (!fake)kernel_entry (0 , machid, r2); +#endif }/* Main Entry point for arm bootm implementation
arch/arm/lib/crt0_64.S new file +116 -0
116 lines not on this page · raw message
arch/arm/lib/interrupts_64.c new file +120 -0
120 lines not on this page · raw message
arch/arm/lib/relocate_64.S new file +57 -0
57 lines not on this page · raw message
common/image.c +1 -0
@@ -81,6 +81,7 @@ static const table_entry_t uimage_arch[] = { { IH_ARCH_NDS32, "nds32", "NDS32", }, { IH_ARCH_OPENRISC, "or1k", "OpenRISC 1000",}, { IH_ARCH_SANDBOX, "sandbox", "Sandbox", }, + { IH_ARCH_ARM64, "arm64", "AArch64", }, { -1, "", "", }, };
doc/README.armv8 new file +18 -0
@@ -0,0 +1,18 @@ +Notes: + +1. Currenly, u-boot could be running at EL1 or EL2. + +2. GOT is used to relocate u-boot and CONFIG_NEEDS_MANUAL_RELOC is needed. + +3. Fdt should be placed at a 2-megabyte boundary and within the first 512 + megabytes from the start of the kernel image. So, fdt_high should be + defined specially. + Please reference linux/Documentation/arm64/booting.txt for detail. + +4. Generic board is supported. + +Contributor: + Tom Rini <[email protected]> + Scott Wood <[email protected]> + Sharma Bhupesh <[email protected]> + Rob Herring <[email protected]>
examples/standalone/stubs.c +15 -0
@@ -39,6 +39,20 @@ gd_t *global_data; " bctr\n" \ : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r11");#elif defined(CONFIG_ARM ) +#ifdef CONFIG_ARMV8 +/* +* x18 holds the pointer to the global_data, x9 is a call-clobbered +* register +*/ +#define EXPORT_FUNC (x) \ + asm volatile ( \ +" .globl " #x "\n" \ +#x ":\n" \ +" ldr x9, [x18, %0]\n" \ +" ldr x9, [x9, %1]\n" \ +" br x9\n" \ + : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "x9"); +#else /* * r8 holds the pointer to the global_data, ip is a call-clobbered * register
@@ -50,6 +64,7 @@ gd_t *global_data; " ldr ip, [r8, %0]\n" \ " ldr pc, [ip, %1]\n" \ : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "ip"); +#endif #elif defined(CONFIG_MIPS)/* * k0 ($26) holds the pointer to the global_data; t9 ($25) is a call-
include/image.h +1 -0
@@ -156,6 +156,7 @@ struct lmb;#define IH_ARCH_SANDBOX 19/* Sandbox architecture (test only) */ #define IH_ARCH_NDS32 20/* ANDES Technology - NDS32 */ #define IH_ARCH_OPENRISC 21/* OpenRISC 1000 */ +#define IH_ARCH_ARM64 22/* ARM64 */ /* * Image Types
Signature · 1 line
1.7.9.5
PATCH v10 2/6 board support of vexpress_aemv8a
From: David Feng <[email protected]>
--- MAINTAINERS | 4 + board/armltd/dts/vexpress64.dts | 439 ++++++++++++++++++++++++++++++++++ board/armltd/vexpress64/Makefile | 27 +++ board/armltd/vexpress64/vexpress64.c | 70 ++++++ boards.cfg | 1 + include/configs/vexpress_aemv8a.h | 191 +++++++++++++++ 6 files changed, 732 insertions(+) create mode 100644 board/armltd/dts/vexpress64.dts create mode 100644 board/armltd/vexpress64/Makefile create mode 100644 board/armltd/vexpress64/vexpress64.c create mode 100644 include/configs/vexpress_aemv8a.h
MAINTAINERS +4 -0
@@ -1095,6 +1095,10 @@ Sergey Yanovich <[email protected]> lp8x4x xscale/pxa +David Feng <[email protected]> + + vexpress_aemv8a ARM ARMV8 (Quad Core) + ------------------------------------------------------------------------- Unknown / orphaned boards:
board/armltd/dts/vexpress64.dts new file +439 -0
439 lines not on this page · raw message
board/armltd/vexpress64/Makefile new file +27 -0
@@ -0,0 +1,27 @@ +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd at denx.de. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := vexpress64.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +#########################################################################
board/armltd/vexpress64/vexpress64.c new file +70 -0
70 lines not on this page · raw message
boards.cfg +1 -0
@@ -1196,5 +1196,6 @@ gr_ep2s60 sparc leon3 - gaisler grsim sparc leon3 - gaisler gr_xc3s_1500 sparc leon3 - gaisler coreboot-x86 x86 x86 coreboot chromebook-x86 coreboot coreboot:SYS_TEXT_BASE=0x01110000 +vexpress_aemv8a arm armv8 vexpress64 armltd - vexpress_aemv8a:ARMV8 # Target ARCH CPU Board name Vendor SoC Options ########################################################################################################################
include/configs/vexpress_aemv8a.h new file +191 -0
191 lines not on this page · raw message
Signature · 1 line
1.7.9.5
PATCH v10 3/6 generic board patch of manual reloc and zero gd_t
From: David Feng <[email protected]>
--- common/board_f.c | 18 +++++++++++------- common/board_r.c | 18 ++++++++++++++++++ 2 files changed, 29 insertions(+), 7 deletions(-)
common/board_f.c +11 -7
@@ -458,7 +458,7 @@ static int reserve_round_4k(void)static int reserve_mmu (void ) {/* reserve TLB table */ - gd->arch.tlb_size =4096 *4 ; + gd->arch.tlb_size =PGTABLE_SIZE ; gd->relocaddr -= gd->arch.tlb_size;/* round down to next 64 kB limit */
@@ -610,7 +610,7 @@ static int reserve_stacks(void)* TODO(sjg at chromium.org): Perhaps create arch_reserve_stack() * to handle this and put in arch/xxx/lib/stack.c */ -# ifdef CONFIG_ARM +# if defined(CONFIG_ARM ) && !defined(CONFIG_ARMV8 )# ifdef CONFIG_USE_IRQ gd->start_addr_sp -= (CONFIG_STACKSIZE_IRQ +CONFIG_STACKSIZE_FIQ ); debug("Reserving %zu Bytes for IRQ stack at: %08lx\n",
@@ -807,11 +807,6 @@ static int mark_bootstage(void) } static init_fnc_t init_sequence_f[] = { -#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC512X) && \ - !defined (CONFIG_MPC83xx) && !defined (CONFIG_MPC85xx) && \ - !defined (CONFIG_MPC86xx) && !defined (CONFIG_X86 ) - zero_global_data, -#endif#ifdef CONFIG_SANDBOX setup_ram_buf,#endif
@@ -1005,6 +1000,15 @@ void board_init_f(ulong boot_flags) gd = &data;#endif +/* +* Zero gd_t first, otherwise the debug print(if DEBUG defined) +* in initcall_run_list function before zero_global_data is called +* will go wrong. +*/ +#ifndef CONFIG_X86 +zero_global_data (); +#endif + gd->flags = boot_flags;if (initcall_run_list (init_sequence_f))
common/board_r.c +18 -0
@@ -157,6 +157,13 @@ static int initr_reloc_global_data(void)*/ gd->env_addr += gd->relocaddr -CONFIG_SYS_MONITOR_BASE ;#endif +#ifdef CONFIG_NEEDS_MANUAL_RELOC +/* +* We have to relocate the command table manually +*/ +fixup_cmdtable (ll_entry_start (cmd_tbl_t, cmd), +ll_entry_count (cmd_tbl_t, cmd)); +#endif /* CONFIG_NEEDS_MANUAL_RELOC */ return 0 ; }
@@ -899,6 +906,7 @@ init_fnc_t init_sequence_r[] = { initr_modem, #endif run_main_loop, + NULL, };void board_init_r (gd_t *new_gd,ulong dest_addr)
@@ -906,6 +914,16 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)#ifndef CONFIG_X86 gd = new_gd;#endif +#ifdef CONFIG_NEEDS_MANUAL_RELOC +/* +* We have to relocate the init_sequence_r table manually +*/ +init_fnc_t *init_fnc_ptr; +for (init_fnc_ptr = init_sequence_r; *init_fnc_ptr; ++init_fnc_ptr) + *(unsigned long *)init_fnc_ptr = + (unsigned long )(*init_fnc_ptr) + gd->reloc_off; +#endif /* CONFIG_NEEDS_MANUAL_RELOC */ +if (initcall_run_list (init_sequence_r))hang ();
Signature · 1 line
1.7.9.5
PATCH v10 4/6 64bit initrd start address support
From: David Feng <[email protected]>
--- common/fdt_support.c | 66 ++++++++++++++++++++++++++------------------------ 1 file changed, 34 insertions(+), 32 deletions(-)
common/fdt_support.c +34 -32
@@ -21,6 +21,34 @@*/ DECLARE_GLOBAL_DATA_PTR ; +/* +* Get cells len in bytes +* if #NNNN-cells property is 2 then len is 8 +* otherwise len is 4 +*/ +static int get_cells_len (void *blob,char *nr_cells_name) +{ +const fdt32_t *cell; + + cell =fdt_getprop (blob,0 , nr_cells_name,NULL ); +if (cell &&fdt32_to_cpu (*cell) ==2 ) +return 8 ; + +return 4 ; +} + +/* +* Write a 4 or 8 byte big endian cell +*/ +static void write_cell (u8 *addr,u64 val,int size) +{ +int shift = (size -1 ) *8 ; +while (size-- >0 ) { + *addr++ = (val >> shift) &0xff ; + shift -=8 ; + } +} +/** * fdt_getprop_u32_default - Find a node and return it's property or a default *
@@ -131,9 +159,9 @@ static int fdt_fixup_stdout(void *fdt, int chosenoff)int fdt_initrd (void *fdt,ulong initrd_start,ulong initrd_end,int force) { -int nodeoffset; +int nodeoffset, addr_cell_len;int err, j, total; -fdt32_t tmp; +fdt64_t tmp;const char *path;uint64_t addr, size;
@@ -170,9 +198,11 @@ int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force)return err; } + addr_cell_len =get_cells_len (fdt,"#address-cells" ); + path =fdt_getprop (fdt, nodeoffset,"linux,initrd-start" ,NULL );if ((path ==NULL ) || force) { - tmp =cpu_to_fdt32 (initrd_start); +write_cell ((u8 *)&tmp, initrd_start, addr_cell_len); err =fdt_setprop (fdt, nodeoffset,"linux,initrd-start" , &tmp,sizeof (tmp));if (err <0 ) {
@@ -181,7 +211,7 @@ int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force) fdt_strerror(err));return err; } - tmp =cpu_to_fdt32 (initrd_end); +write_cell ((u8 *)&tmp, initrd_end, addr_cell_len); err =fdt_setprop (fdt, nodeoffset,"linux,initrd-end" , &tmp,sizeof (tmp));if (err <0 ) {
@@ -343,34 +373,6 @@ void do_fixup_by_compat_u32(void *fdt, const char *compat,do_fixup_by_compat (fdt, compat, prop, &tmp,4 , create); } -/* -* Get cells len in bytes -* if #NNNN-cells property is 2 then len is 8 -* otherwise len is 4 -*/ -static int get_cells_len (void *blob,char *nr_cells_name) -{ -const fdt32_t *cell; - - cell =fdt_getprop (blob,0 , nr_cells_name,NULL ); -if (cell &&fdt32_to_cpu (*cell) ==2 ) -return 8 ; - -return 4 ; -} - -/* -* Write a 4 or 8 byte big endian cell -*/ -static void write_cell (u8 *addr,u64 val,int size) -{ -int shift = (size -1 ) *8 ; -while (size-- >0 ) { - *addr++ = (val >> shift) &0xff ; - shift -=8 ; - } -} -#ifdef CONFIG_NR_DRAM_BANKS #define MEMORY_BANKS_MAX CONFIG_NR_DRAM_BANKS#else
Signature · 1 line
1.7.9.5
PATCH v10 5/6 remove compiling warnings
From: David Feng <[email protected]>
--- common/cmd_pxe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
common/cmd_pxe.c +2 -2
@@ -57,7 +57,7 @@ static int format_mac_pxe(char *outbuf, size_t outbuf_len)uchar ethaddr[6 ];if (outbuf_len <21 ) { -printf ("outbuf is too small (%d < 21)\n" , outbuf_len); +printf ("outbuf is too small (%zd < 21)\n" , outbuf_len);return -EINVAL ; }
@@ -100,7 +100,7 @@ static int get_bootfile_path(const char *file_path, char *bootfile_path, path_len = (last_slash - bootfile) +1 ;if (bootfile_path_size < path_len) { -printf ("bootfile_path too small. (%d < %d)\n" , +printf ("bootfile_path too small. (%zd < %zd)\n" , bootfile_path_size, path_len);return -1 ;
Signature · 1 line
1.7.9.5
PATCH v10 6/6 add weak entry definition
From: David Feng <[email protected]>
--- include/linux/linkage.h | 4 ++++ 1 file changed, 4 insertions(+)
include/linux/linkage.h +4 -0
@@ -49,6 +49,10 @@ .globl SYMBOL_NAME(name); \ LENTRY(name) +#define WEAK (name) \ + .weak SYMBOL_NAME(name); \ + LENTRY(name) +#ifndef END #define END (name) \ .size name, .-name
Signature · 1 line
1.7.9.5
PATCH v10 1/6 core support of arm64
In reply to fenghua at phytium.com.cnQuoted 4 lines · fenghua at phytium.com.cn
From: David Feng <[email protected]>
Signed-off-by David Feng <[email protected]>---
You've still got CONFIG_ARMV8 in places that should be CONFIG_ARM64
arch/arm/cpu/armv8/exceptions.S line 6
Quoted 12 lines
arch/arm/cpu/armv8/exceptions.S new file +6
-0@@ -0,0 +1,115 @@ +/* + * (C) Copyright 2013 + * David Feng <[email protected]> + * + * SPDX-License-Identifier: GPL-2.0+ + */
Note that Tom said he'd be OK with using GPL2-only code from Linux, as long as it's properly attributed.
Quoted 4 lines
arch/arm/cpu/armv8/exceptions.S new file +4
-0+2. GOT is used to relocate u-boot and CONFIG_NEEDS_MANUAL_RELOC is needed. + +3. Fdt should be placed at a 2-megabyte boundary and within the first 512 + megabytes from the start of the kernel image. So, fdt_high should be
arch/arm/cpu/armv8/exceptions.S line 20
Quoted 10 lines
arch/arm/cpu/armv8/exceptions.S new file +10
-0+ defined specially. + Please reference linux/Documentation/arm64/booting.txt for detail. + +4. Generic board is supported. + +Contributor: + Tom Rini <[email protected]> + Scott Wood <[email protected]> + Sharma Bhupesh <[email protected]> + Rob Herring <[email protected]>
Should it be:
Bhupesh Sharma <[email protected]>
?
-Scott
PATCH v10 1/6 core support of arm64
Dear Scott,
Quoted 7 lines · In message <[email protected]> you wrote:
Quoted 4 lines
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */Note that Tom said he'd be OK with using GPL2-only code from Linux, as long as it's properly attributed.
But we do prefer GPL-2.0+ whenever we can have it.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If I have seen further it is by standing on the shoulders of giants.
- Isaac Newton, Letter to Robert Hooke, 5 February 1676PATCH v10 1/6 core support of arm64
In reply to Scott WoodQuoted 10 lines
-----????-----
???: "Scott Wood" <[email protected]>
????: 2013?9?17? ???
???: fenghua at phytium.com.cn
??: u-boot at lists.denx.de, trini at ti.com, albert.u.boot at aribaud.net, wd at denx.de, B45370 at freescale.com ??: Re: [PATCH v10 1/6] core support of arm64
Quoted 7 lines
Quoted 4 lines · fenghua at phytium.com.cn
From: David Feng <[email protected]>
Signed-off-by David Feng <[email protected]>---
You've still got
CONFIG_ARMV8in places that should beCONFIG_ARM64
I am hesitate to use CONFIG_ARM64 instead of CONFIG _ARMV8.
I am not sure whether all the CONFIG_ARMV8 could be replaced with CONFIG_ARM64 or CONFIG_ARMV8 and CONFIG_ARMV64 are both needed.
I will take this into account in the next.
Quoted 17 lines
arch/arm/cpu/armv8/exceptions.S line 6
Quoted 13 lines
arch/arm/cpu/armv8/exceptions.S new file +6
-0@@ -0,0 +1,115 @@ +/* + * (C) Copyright 2013 + * David Feng <[email protected]> + * + * SPDX-License-Identifier: GPL-2.0+ + */Note that Tom said he'd be OK with using GPL2-only code from Linux, as long as it's properly attributed.
Currently, the stack preservation code has no comparability with it's original copy. I think it could be licensed with GPL-2.0+.
Quoted 10 lines
Quoted 10 lines
arch/arm/cpu/armv8/exceptions.S new file +10
-0+2. GOT is used to relocate u-boot and CONFIG_NEEDS_MANUAL_RELOC is needed. + +3. Fdt should be placed at a 2-megabyte boundary and within the first 512 + megabytes from the start of the kernel image. So, fdt_high should be + defined specially. + Please reference linux/Documentation/arm64/booting.txt for detail. + +4. Generic board is supported. + +Contributor:
Quoted 8 lines
arch/arm/cpu/armv8/exceptions.S line 20
Quoted 4 lines
arch/arm/cpu/armv8/exceptions.S new file +4
-0+ Tom Rini <[email protected]> + Scott Wood <[email protected]> + Sharma Bhupesh <[email protected]> + Rob Herring <[email protected]>Should it be:
Bhupesh Sharma <[email protected]>
?
It seems that Bhupesh Sharma own two mail box and he usually use B45370 at freescale.com at u-boot mailing list. I will fix it in the next.
Best regards.
Quoted 4 lines
-Scott
PATCH v10 1/6 core support of arm64
Quoted 15 lines · FengHua
Quoted 15 lines
-----????-----
???: "Scott Wood" <[email protected]>
????: 2013?9?17? ???
???: fenghua at phytium.com.cn
??: u-boot at lists.denx.de, trini at ti.com, albert.u.boot at aribaud.net, wd at denx.de, B45370 at freescale.com ??: Re: [PATCH v10 1/6] core support of arm64Quoted 4 lines · fenghua at phytium.com.cn
From: David Feng <[email protected]>
Signed-off-by David Feng <[email protected]>---
Quoted 6 lines
Quoted 1 line
You've still got
CONFIG_ARMV8in places that should beCONFIG_ARM64I am hesitate to use
CONFIG_ARM64instead of CONFIG_ARMV8.
I am not sure whether all theCONFIG_ARMV8could be replaced withCONFIG_ARM64orCONFIG_ARMV8andCONFIG_ARMV64are both needed.
I will take this into account in the next.
If it inherently relates to being 64-bit (including ABI issues), use CONFIG_ARM64. If it's something that is new in ARMv8 but isn't specifically due to 64-bitness (e.g. cache stuff, if it's different from ARMv7), and could reasonably be different in a 64-bit ARMv9, then use CONFIG_ARMV8.
-Scott
PATCH v10 1/6 core support of arm64
When "64-bit ARMv9" was announced ?
Quoted 40 lines · Scott Wood
Quoted 7 lines · FengHua
Quoted 7 lines
-----????-----
???: "Scott Wood" <[email protected]>
????: 2013?9?17? ???
???: fenghua at phytium.com.cn
??: u-boot at lists.denx.de, trini at ti.com, albert.u.boot at aribaud.net,wd at denx.de, B45370 at freescale.com
Quoted 5 lines
Quoted 5 lines
??: Re: [PATCH v10 1/6] core support of arm64
Quoted 2 lines · fenghua at phytium.com.cn
From: David Feng <[email protected]>
Quoted 7 lines
Quoted 4 lines
Quoted 2 lines
Signed-off-by David Feng <[email protected]>---
You've still got
CONFIG_ARMV8in places that should beCONFIG_ARM64I am hesitate to use
CONFIG_ARM64instead of CONFIG_ARMV8. I am not sure whether all theCONFIG_ARMV8could be replaced with
CONFIG_ARM64Quoted 2 lines
or
CONFIG_ARMV8andCONFIG_ARMV64are both needed. I will take this into account in the next.If it inherently relates to being 64-bit (including ABI issues), use
CONFIG_ARM64. If it's something that is new in ARMv8 but isn't specifically due to 64-bitness (e.g. cache stuff, if it's different from ARMv7), and could reasonably be different in a 64-bit ARMv9, then useCONFIG_ARMV8.-Scott
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Signature · 1 line
-mj
PATCH v10 1/6 core support of arm64
Sigh. It wasn't. It's a hypothetical possibility to help guide the decision of whether to classify a piece of code as "arm64" or "armv8".
-Scott
Quoted 58 lines · Mj Embd
When "64-bit ARMv9" was announced ?
On Thu, Sep 26, 2013 at 4:46 AM, Scott Wood <[email protected]> wrote:
On Tue, 2013-09-17 at 16:37 +0800, FengHua wrote:
>
>
> > -----????-----
> > ???: "Scott Wood" <[email protected]>
> > ????: 2013?9?17? ???
> > ???: fenghua at phytium.com.cn
> > ??: u-boot at lists.denx.de, trini at ti.com, albert.u.boot at aribaud.net, wd at denx.de, B45370 at freescale.com > > ??: Re: [PATCH v10 1/6] core support of arm64
> >
> > On Mon, 2013-09-16 at 16:08 +0800, fenghua at phytium.com.cn wrote:
> > > From: David Feng <[email protected]>
> > >
> > > Signed-off-by: David Feng <[email protected]> > > > ---
> >
> > You've still gotCONFIG_ARMV8in places that should beCONFIG_ARM64
>
> I am hesitate to useCONFIG_ARM64instead of CONFIG_ARMV8. > I am not sure whether all theCONFIG_ARMV8could be replaced withCONFIG_ARM64
> orCONFIG_ARMV8andCONFIG_ARMV64are both needed.
> I will take this into account in the next.If it inherently relates to being 64-bit (including ABI issues), use
CONFIG_ARM64. If it's something that is new in ARMv8 but isn't
specifically due to 64-bitness (e.g. cache stuff, if it's different from
ARMv7), and could reasonably be different in a 64-bit ARMv9, then use
CONFIG_ARMV8.-Scott
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-bootSignature · 1 line
-mj