Skip to contentSkip to conversation

arm64 patch

PATCH Superseded fenghua at phytium.com.cn 4 participants 13 messages Sep 16, 2013 – Sep 26, 2013

Subsystems (2)

v10 of 16 Superseded Latest is v16 →

lore
Share & tools
lore
#0 lore raw

v10 cover arm64 patch

From: David Feng <[email protected]>

Changes for v10:
- add weak definition to include/linux/linkage.h and make setup_el2/setup_el3/lowlevel_init weak routines, so them can be easily overridden by processor specific code.
- modify s-o-f of 0002-board-support-of-vexpress_aemv8a which use wrong mail address of Bhupesh Sharma.

Changes for v9:
- add Signed-off-by information to patch "board support of vexpress_aemv8a" which SMC91111 support is integrated from Sharma Bhupesh's patch.
- adjust pt_regs struct and add exception state preservation in exception.S.

Changes for v8:
- Integrate SMC91111 patch of sharma bhupesh.
- remove v8_outer_cache* which is not need currently.
- Change license tag.
- Mov crt0.S/relocate.S/interrupts.c to arm/lib and rename them with _64 suffix.
- Make el3/el2 initializing process of start.S as two separate routines. It could be easier to be replaced with processor specific codes.
- Remove exception stack save and restore routine, it is unnecessary now.
- simplify __weak function declaration.

Changes for v7:
- Check the patches with checkpatch.pl and get rid of almost all warnings. There are a few warnings still, but I think it should be that.
- change printf format in cmd_pxe.c, use %zd indtead of %ld to format size_t type variable.
- add macro PGTABLE_SIZE to identify tlb table size.

Changes for v6:
- Make modification to inappropriate licensed file and bugs according to ScottWood's advice. Thanks Scott for his checking to these patches.
- Enable u-boot's running at EL1.
- Get rid of compiling warnings originated from cmd_pxe.c.

Changes for v5:
- fix the generic board_f.c, remove zero_global_data from init_sequence_f array and move it to board_init_f() function with CONFIG_X86 switch. The previous fixup is inaccurate.
- Replace __ARMEB__ with __AARCH64EB__ in byteorder.h and unaligned.h, gcc for aarch64 use __AARCH64EB__ and __AARCH64EL__ to identify endian.
- Some modification to README.armv8

Changes for v4:
- merge arm64 to arm architecture.

David Feng (6):
core support of arm64
board support of vexpress_aemv8a
generic board patch of manual reloc and zero gd_t 64bit initrd start address support
remove compiling warnings
add weak entry definition

 MAINTAINERS                             |    4 +
 arch/arm/config.mk                      |    4 +
 arch/arm/cpu/armv8/Makefile             |   38 +++
 arch/arm/cpu/armv8/cache.S              |  130 +++++++++
 arch/arm/cpu/armv8/cache_v8.c           |  228 ++++++++++++++++
 arch/arm/cpu/armv8/config.mk            |   16 ++
 arch/arm/cpu/armv8/cpu.c                |   67 +++++
 arch/arm/cpu/armv8/exceptions.S         |  115 ++++++++
 arch/arm/cpu/armv8/start.S              |  238 +++++++++++++++++
 arch/arm/cpu/armv8/timer.c              |   80 ++++++
 arch/arm/cpu/armv8/tlb.S                |   30 +++
 arch/arm/cpu/armv8/u-boot.lds           |   71 +++++
 arch/arm/include/asm/arch-armv8/gpio.h  |   11 +
 arch/arm/include/asm/arch-armv8/mmu.h   |  106 ++++++++
 arch/arm/include/asm/byteorder.h        |   12 +
 arch/arm/include/asm/cache.h            |    5 +
 arch/arm/include/asm/config.h           |   10 +
 arch/arm/include/asm/global_data.h      |    6 +-
 arch/arm/include/asm/io.h               |   15 +-
 arch/arm/include/asm/macro.h            |   20 ++
 arch/arm/include/asm/posix_types.h      |   10 +
 arch/arm/include/asm/proc-armv/ptrace.h |   21 ++
 arch/arm/include/asm/proc-armv/system.h |   59 ++++-
 arch/arm/include/asm/system.h           |   77 ++++++
 arch/arm/include/asm/types.h            |    4 +
 arch/arm/include/asm/u-boot.h           |    4 +
 arch/arm/include/asm/unaligned.h        |    2 +-
 arch/arm/lib/Makefile                   |   14 +
 arch/arm/lib/board.c                    |   16 +-
 arch/arm/lib/bootm.c                    |   16 ++
 arch/arm/lib/crt0_64.S                  |  116 ++++++++
 arch/arm/lib/interrupts_64.c            |  120 +++++++++
 arch/arm/lib/relocate_64.S              |   57 ++++
 board/armltd/dts/vexpress64.dts         |  439 +++++++++++++++++++++++++++++++
 board/armltd/vexpress64/Makefile        |   27 ++
 board/armltd/vexpress64/vexpress64.c    |   70 +++++
 boards.cfg                              |    1 +
 common/board_f.c                        |   18 +-
 common/board_r.c                        |   18 ++
 common/cmd_pxe.c                        |    4 +-
 common/fdt_support.c                    |   66 ++---
 common/image.c                          |    1 +
 doc/README.armv8                        |   18 ++
 examples/standalone/stubs.c             |   15 ++
 include/configs/vexpress_aemv8a.h       |  191 ++++++++++++++
 include/image.h                         |    1 +
 include/linux/linkage.h                 |    4 +
 47 files changed, 2544 insertions(+), 51 deletions(-)
 create mode 100644 arch/arm/cpu/armv8/Makefile
 create mode 100644 arch/arm/cpu/armv8/cache.S
 create mode 100644 arch/arm/cpu/armv8/cache_v8.c
 create mode 100644 arch/arm/cpu/armv8/config.mk
 create mode 100644 arch/arm/cpu/armv8/cpu.c
 create mode 100644 arch/arm/cpu/armv8/exceptions.S
 create mode 100644 arch/arm/cpu/armv8/start.S
 create mode 100644 arch/arm/cpu/armv8/timer.c
 create mode 100644 arch/arm/cpu/armv8/tlb.S
 create mode 100644 arch/arm/cpu/armv8/u-boot.lds
 create mode 100644 arch/arm/include/asm/arch-armv8/gpio.h
 create mode 100644 arch/arm/include/asm/arch-armv8/mmu.h
 create mode 100644 arch/arm/lib/crt0_64.S
 create mode 100644 arch/arm/lib/interrupts_64.c
 create mode 100644 arch/arm/lib/relocate_64.S
 create mode 100644 board/armltd/dts/vexpress64.dts
 create mode 100644 board/armltd/vexpress64/Makefile
 create mode 100644 board/armltd/vexpress64/vexpress64.c
 create mode 100644 doc/README.armv8
 create mode 100644 include/configs/vexpress_aemv8a.h
Signature · 1 line
1.7.9.5
#1 lore raw

PATCH v10 1/6 core support of arm64

From: David Feng <[email protected]>

---
 arch/arm/config.mk                      |    4 +
 arch/arm/cpu/armv8/Makefile             |   38 +++++
 arch/arm/cpu/armv8/cache.S              |  130 +++++++++++++++++
 arch/arm/cpu/armv8/cache_v8.c           |  228 +++++++++++++++++++++++++++++
 arch/arm/cpu/armv8/config.mk            |   16 +++
 arch/arm/cpu/armv8/cpu.c                |   67 +++++++++
 arch/arm/cpu/armv8/exceptions.S         |  115 +++++++++++++++
 arch/arm/cpu/armv8/start.S              |  238 +++++++++++++++++++++++++++++++
 arch/arm/cpu/armv8/timer.c              |   80 +++++++++++
 arch/arm/cpu/armv8/tlb.S                |   30 ++++
 arch/arm/cpu/armv8/u-boot.lds           |   71 +++++++++
 arch/arm/include/asm/arch-armv8/gpio.h  |   11 ++
 arch/arm/include/asm/arch-armv8/mmu.h   |  106 ++++++++++++++
 arch/arm/include/asm/byteorder.h        |   12 ++
 arch/arm/include/asm/cache.h            |    5 +
 arch/arm/include/asm/config.h           |   10 ++
 arch/arm/include/asm/global_data.h      |    6 +-
 arch/arm/include/asm/io.h               |   15 +-
 arch/arm/include/asm/macro.h            |   20 +++
 arch/arm/include/asm/posix_types.h      |   10 ++
 arch/arm/include/asm/proc-armv/ptrace.h |   21 +++
 arch/arm/include/asm/proc-armv/system.h |   59 +++++++-
 arch/arm/include/asm/system.h           |   77 ++++++++++
 arch/arm/include/asm/types.h            |    4 +
 arch/arm/include/asm/u-boot.h           |    4 +
 arch/arm/include/asm/unaligned.h        |    2 +-
 arch/arm/lib/Makefile                   |   14 ++
 arch/arm/lib/board.c                    |   16 ++-
 arch/arm/lib/bootm.c                    |   16 +++
 arch/arm/lib/crt0_64.S                  |  116 +++++++++++++++
 arch/arm/lib/interrupts_64.c            |  120 ++++++++++++++++
 arch/arm/lib/relocate_64.S              |   57 ++++++++
 common/image.c                          |    1 +
 doc/README.armv8                        |   18 +++
 examples/standalone/stubs.c             |   15 ++
 include/image.h                         |    1 +
 36 files changed, 1743 insertions(+), 10 deletions(-)
 create mode 100644 arch/arm/cpu/armv8/Makefile
 create mode 100644 arch/arm/cpu/armv8/cache.S
 create mode 100644 arch/arm/cpu/armv8/cache_v8.c
 create mode 100644 arch/arm/cpu/armv8/config.mk
 create mode 100644 arch/arm/cpu/armv8/cpu.c
 create mode 100644 arch/arm/cpu/armv8/exceptions.S
 create mode 100644 arch/arm/cpu/armv8/start.S
 create mode 100644 arch/arm/cpu/armv8/timer.c
 create mode 100644 arch/arm/cpu/armv8/tlb.S
 create mode 100644 arch/arm/cpu/armv8/u-boot.lds
 create mode 100644 arch/arm/include/asm/arch-armv8/gpio.h
 create mode 100644 arch/arm/include/asm/arch-armv8/mmu.h
 create mode 100644 arch/arm/lib/crt0_64.S
 create mode 100644 arch/arm/lib/interrupts_64.c
 create mode 100644 arch/arm/lib/relocate_64.S
 create mode 100644 doc/README.armv8
arch/arm/config.mk +4 -0
index ce3903b..f1c6a7b 100644
@@ -74,7 +74,9 @@ endif
 endif
 
 # needed for relocation
+ifndef CONFIG_ARMV8
 LDFLAGS_u-boot += -pie
+endif
 
 #
 # FIXME: binutils versions < 2.22 have a bug in the assembler where
@@ -95,6 +97,8 @@ endif
 endif
 
 # check that only R_ARM_RELATIVE relocations are generated
+ifndef CONFIG_ARMV8
 ifneq ($(CONFIG_SPL_BUILD),y)
 ALL-y	+= checkarmreloc
 endif
+endif
arch/arm/cpu/armv8/Makefile new file +38 -0
new file mode 100644
index 0000000..b216f27
@@ -0,0 +1,38 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(CPU).o
+
+START	:= start.o
+
+COBJS	+= cpu.o
+COBJS	+= timer.o
+COBJS	+= cache_v8.o
+
+SOBJS	+= exceptions.o
+SOBJS	+= cache.o
+SOBJS	+= tlb.o
+
+SRCS	:= $(START:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS) $(SOBJS))
+START	:= $(addprefix $(obj),$(START))
+
+all:	$(obj).depend $(START) $(LIB)
+
+$(LIB):	$(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
arch/arm/cpu/armv8/cache.S new file +130 -0

130 lines not on this page · raw message

arch/arm/cpu/armv8/cache_v8.c new file +228 -0

228 lines not on this page · raw message

arch/arm/cpu/armv8/config.mk new file +16 -0
new file mode 100644
index 0000000..9f36d59
@@ -0,0 +1,16 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <[email protected]>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+PLATFORM_RELFLAGS += -fno-common -ffixed-x18
+
+# SEE README.arm-unaligned-accesses
+PF_NO_UNALIGNED := $(call cc-option, -mstrict-align)
+PLATFORM_NO_UNALIGNED := $(PF_NO_UNALIGNED)
+
+PF_CPPFLAGS_ARMV8 := $(call cc-option, -march=armv8-a)
+PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_ARMV8)
+PLATFORM_CPPFLAGS += $(PF_NO_UNALIGNED)
+PLATFORM_CPPFLAGS += -fpic
arch/arm/cpu/armv8/cpu.c new file +67 -0

67 lines not on this page · raw message

arch/arm/cpu/armv8/exceptions.S new file +115 -0

115 lines not on this page · raw message

arch/arm/cpu/armv8/start.S new file +238 -0

238 lines not on this page · raw message

arch/arm/cpu/armv8/timer.c new file +80 -0

80 lines not on this page · raw message

arch/arm/cpu/armv8/tlb.S new file +30 -0
new file mode 100644
index 0000000..6bb1e1f
@@ -0,0 +1,30 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <[email protected]>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <version.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+
+/*
+ * void __asm_invalidate_tlb_all(void)
+ *
+ * invalidate all tlb entries.
+ */
+ENTRY(__asm_invalidate_tlb_all)
+	switch_el1_el2 x9, 1f, 2f, 3f
+1:	tlbi	vmalle1
+	dsb	sy
+	isb
+	b	3f
+2:	tlbi	alle2
+	dsb	sy
+	isb
+3:
+	ret
+ENDPROC(__asm_invalidate_tlb_all)
arch/arm/cpu/armv8/u-boot.lds new file +71 -0

71 lines not on this page · raw message

arch/arm/include/asm/arch-armv8/gpio.h new file +11 -0
new file mode 100644
index 0000000..afe7ece
@@ -0,0 +1,11 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <[email protected]>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _ASM_ARMV8_GPIO_H_
+#define _ASM_ARMV8_GPIO_H_
+
+#endif	/* _ASM_ARMV8_GPIO_H_ */
arch/arm/include/asm/arch-armv8/mmu.h new file +106 -0

106 lines not on this page · raw message

arch/arm/include/asm/byteorder.h +12 -0
index c3489f1..7d3f9e4 100644
@@ -23,10 +23,22 @@
 #  define __SWAB_64_THRU_32__
 #endif
 
+#ifdef	CONFIG_ARMV8
+
+#ifdef __AARCH64EB__
+#include <linux/byteorder/big_endian.h>
+#else
+#include <linux/byteorder/little_endian.h>
+#endif
+
+#else	/* CONFIG_ARMV8 */
+
 #ifdef __ARMEB__
 #include <linux/byteorder/big_endian.h>
 #else
 #include <linux/byteorder/little_endian.h>
 #endif
 
+#endif	/* CONFIG_ARMV8 */
+
 #endif
arch/arm/include/asm/cache.h +5 -0
index 6d60a4a..49a8a88 100644
@@ -11,6 +11,8 @@
 
 #include <asm/system.h>
 
+#ifndef CONFIG_ARMV8
+
 /*
  * Invalidate L2 Cache using co-proc instruction
  */
@@ -28,6 +30,9 @@ void l2_cache_disable(void);
 void set_section_dcache(int section, enum dcache_option option);
 
 void dram_bank_mmu_setup(int bank);
+
+#endif
+
 /*
  * The current upper bound for ARM L1 data cache line sizes is 64 bytes.  We
  * use that value for aligning DMA buffers unless the board config has specified
arch/arm/include/asm/config.h +10 -0
index 99b703e..30f008e 100644
@@ -9,4 +9,14 @@
 
 #define CONFIG_LMB
 #define CONFIG_SYS_BOOT_RAMDISK_HIGH
+
+#ifdef CONFIG_ARMV8
+/*
+ * Currently, GOT is used to relocate u-boot and
+ * configuration CONFIG_NEEDS_MANUAL_RELOC is needed.
+ */
+#define CONFIG_NEEDS_MANUAL_RELOC
+#define CONFIG_PHYS_64BIT
+#endif
+
 #endif
arch/arm/include/asm/global_data.h +5 -1
index 79a9597..b30dd5e 100644
@@ -47,6 +47,10 @@ struct arch_global_data {
 
 #include <asm-generic/global_data.h>
 
-#define DECLARE_GLOBAL_DATA_PTR     register volatile gd_t *gd asm ("r8")
+#ifdef CONFIG_ARMV8
+#define DECLARE_GLOBAL_DATA_PTR		register volatile gd_t *gd asm ("x18")
+#else
+#define DECLARE_GLOBAL_DATA_PTR		register volatile gd_t *gd asm ("r8")
+#endif
 
 #endif /* __ASM_GBL_DATA_H */
arch/arm/include/asm/io.h +9 -6
index 1fbc531..6a1f05a 100644
@@ -75,42 +75,45 @@ static inline phys_addr_t virt_to_phys(void * vaddr)
 #define __arch_putw(v,a)		(*(volatile unsigned short *)(a) = (v))
 #define __arch_putl(v,a)		(*(volatile unsigned int *)(a) = (v))
 
-extern inline void __raw_writesb(unsigned int addr, const void *data, int bytelen)
+extern inline void __raw_writesb(unsigned long addr, const void *data,
+				 int bytelen)
 {
 	uint8_t *buf = (uint8_t *)data;
 	while(bytelen--)
 		__arch_putb(*buf++, addr);
 }
 
-extern inline void __raw_writesw(unsigned int addr, const void *data, int wordlen)
+extern inline void __raw_writesw(unsigned long addr, const void *data,
+				 int wordlen)
 {
 	uint16_t *buf = (uint16_t *)data;
 	while(wordlen--)
 		__arch_putw(*buf++, addr);
 }
 
-extern inline void __raw_writesl(unsigned int addr, const void *data, int longlen)
+extern inline void __raw_writesl(unsigned long addr, const void *data,
+				 int longlen)
 {
 	uint32_t *buf = (uint32_t *)data;
 	while(longlen--)
 		__arch_putl(*buf++, addr);
 }
 
-extern inline void __raw_readsb(unsigned int addr, void *data, int bytelen)
+extern inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
 {
 	uint8_t *buf = (uint8_t *)data;
 	while(bytelen--)
 		*buf++ = __arch_getb(addr);
 }
 
-extern inline void __raw_readsw(unsigned int addr, void *data, int wordlen)
+extern inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
 {
 	uint16_t *buf = (uint16_t *)data;
 	while(wordlen--)
 		*buf++ = __arch_getw(addr);
 }
 
-extern inline void __raw_readsl(unsigned int addr, void *data, int longlen)
+extern inline void __raw_readsl(unsigned long addr, void *data, int longlen)
 {
 	uint32_t *buf = (uint32_t *)data;
 	while(longlen--)
arch/arm/include/asm/macro.h +20 -0
index ff13f36..4057787 100644
@@ -54,5 +54,25 @@
 	bcs	1b
 .endm
 
+#ifdef CONFIG_ARMV8
+/*
+ * Register aliases.
+ */
+lr	.req	x30
+
+/*
+ * Branch according to exception level
+ */
+.macro	switch_el1_el2, xreg, el1_label, el2_label, fail_label
+	mrs	\xreg, CurrentEL
+	cmp	\xreg, 0x4
+	b.eq	\el1_label
+	cmp	\xreg, 0x8
+	b.eq	\el2_label
+	b	\fail_label
+.endm
+
+#endif /* CONFIG_ARMV8 */
+
 #endif /* __ASSEMBLY__ */
 #endif /* __ASM_ARM_MACRO_H__ */
arch/arm/include/asm/posix_types.h +10 -0
index c412486..349404d 100644
@@ -13,6 +13,8 @@
 #ifndef __ARCH_ARM_POSIX_TYPES_H
 #define __ARCH_ARM_POSIX_TYPES_H
 
+#include <config.h>
+
 /*
  * This file is generally used by user-level software, so you need to
  * be a little careful about namespace pollution etc.  Also, we cannot
@@ -28,9 +30,17 @@ typedef int			__kernel_pid_t;
 typedef unsigned short		__kernel_ipc_pid_t;
 typedef unsigned short		__kernel_uid_t;
 typedef unsigned short		__kernel_gid_t;
+
+#ifdef	CONFIG_ARMV8
+typedef unsigned long		__kernel_size_t;
+typedef long			__kernel_ssize_t;
+typedef long			__kernel_ptrdiff_t;
+#else	/* CONFIG_ARMV8 */
 typedef unsigned int		__kernel_size_t;
 typedef int			__kernel_ssize_t;
 typedef int			__kernel_ptrdiff_t;
+#endif	/* CONFIG_ARMV8 */
+
 typedef long			__kernel_time_t;
 typedef long			__kernel_suseconds_t;
 typedef long			__kernel_clock_t;
arch/arm/include/asm/proc-armv/ptrace.h +21 -0
index 79cc644..3830578 100644
@@ -12,6 +12,25 @@
 
 #include <linux/config.h>
 
+#ifdef CONFIG_ARMV8
+
+#define PCMASK		0
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This struct defines the way the registers are stored
+ * on the stack during an exception.
+ */
+struct pt_regs {
+	unsigned long elr;
+	unsigned long regs[31];
+};
+
+#endif	/* __ASSEMBLY__ */
+
+#else	/* CONFIG_ARMV8 */
+
 #define USR26_MODE	0x00
 #define FIQ26_MODE	0x01
 #define IRQ26_MODE	0x02
@@ -106,4 +125,6 @@ static inline int valid_user_regs(struct pt_regs *regs)
 
 #endif	/* __ASSEMBLY__ */
 
+#endif	/* CONFIG_ARMV8 */
+
 #endif
arch/arm/include/asm/proc-armv/system.h +58 -1

71 lines not on this page · raw message

arch/arm/include/asm/system.h +77 -0

93 lines not on this page · raw message

arch/arm/include/asm/types.h +4 -0
index 71dc049..b7794f3 100644
@@ -39,7 +39,11 @@ typedef unsigned int u32;
 typedef signed long long s64;
 typedef unsigned long long u64;
 
+#ifdef	CONFIG_ARMV8
+#define BITS_PER_LONG 64
+#else	/* CONFIG_ARMV8 */
 #define BITS_PER_LONG 32
+#endif	/* CONFIG_ARMV8 */
 
 /* Dma addresses are 32-bits wide.  */
 
arch/arm/include/asm/u-boot.h +4 -0
index 2b5fce8..3ef5538 100644
@@ -44,6 +44,10 @@ typedef struct bd_info {
 #endif /* !CONFIG_SYS_GENERIC_BOARD */
 
 /* For image.h:image_check_target_arch() */
+#ifndef CONFIG_ARMV8
 #define IH_ARCH_DEFAULT IH_ARCH_ARM
+#else
+#define IH_ARCH_DEFAULT IH_ARCH_ARM64
+#endif
 
 #endif	/* _U_BOOT_H_ */
arch/arm/include/asm/unaligned.h +1 -1
index 44593a8..0a228fb 100644
@@ -8,7 +8,7 @@
 /*
  * Select endianness
  */
-#ifndef __ARMEB__
+#if __BYTE_ORDER == __LITTLE_ENDIAN
 #define get_unaligned	__get_unaligned_le
 #define put_unaligned	__put_unaligned_le
 #else
arch/arm/lib/Makefile +14 -0
index 4e78723..b5c949f 100644
@@ -10,6 +10,9 @@ include $(TOPDIR)/config.mk
 LIB	= $(obj)lib$(ARCH).o
 LIBGCC	= $(obj)libgcc.o
 
+ifdef CONFIG_ARMV8
+SOBJS-y += crt0_64.o
+else
 GLSOBJS	+= _ashldi3.o
 GLSOBJS	+= _ashrdi3.o
 GLSOBJS	+= _divsi3.o
@@ -21,9 +24,14 @@ GLSOBJS	+= _umodsi3.o
 GLCOBJS	+= div0.o
 
 SOBJS-y += crt0.o
+endif
 
 ifndef CONFIG_SPL_BUILD
+ifdef CONFIG_ARMV8
+SOBJS-y += relocate_64.o
+else
 SOBJS-y += relocate.o
+endif
 ifndef CONFIG_SYS_GENERIC_BOARD
 COBJS-y	+= board.o
 endif
@@ -38,11 +46,17 @@ else
 COBJS-$(CONFIG_SPL_FRAMEWORK) += spl.o
 endif
 
+ifdef CONFIG_ARMV8
+COBJS-y	+= interrupts_64.o
+else
 COBJS-y	+= interrupts.o
+endif
 COBJS-y	+= reset.o
 
 COBJS-y	+= cache.o
+ifndef CONFIG_ARMV8
 COBJS-y	+= cache-cp15.o
+endif
 
 SRCS	:= $(GLSOBJS:.o=.S) $(GLCOBJS:.o=.c) \
 	   $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
arch/arm/lib/board.c +15 -1
index 34f50b0..61a87a8 100644
@@ -344,7 +344,7 @@ void board_init_f(ulong bootflag)
 
 #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
 	/* reserve TLB table */
-	gd->arch.tlb_size = 4096 * 4;
+	gd->arch.tlb_size = PGTABLE_SIZE;
 	addr -= gd->arch.tlb_size;
 
 	/* round down to next 64 kB limit */
@@ -419,6 +419,7 @@ void board_init_f(ulong bootflag)
 	}
 #endif
 
+#ifndef CONFIG_ARMV8
 	/* setup stackpointer for exeptions */
 	gd->irq_sp = addr_sp;
 #ifdef CONFIG_USE_IRQ
@@ -431,6 +432,10 @@ void board_init_f(ulong bootflag)
 
 	/* 8-byte alignment for ABI compliance */
 	addr_sp &= ~0x07;
+#else	/* CONFIG_ARMV8 */
+	/* 16-byte alignment for ABI compliance */
+	addr_sp &= ~0x0f;
+#endif	/* CONFIG_ARMV8 */
 #else
 	addr_sp += 128;	/* leave 32 words for abort-stack   */
 	gd->irq_sp = addr_sp;
@@ -523,6 +528,15 @@ void board_init_r(gd_t *id, ulong dest_addr)
 
 	debug("monitor flash len: %08lX\n", monitor_flash_len);
 	board_init();	/* Setup chipselects */
+
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+	/*
+	 * We have to relocate the command table manually
+	 */
+	fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
+			ll_entry_count(cmd_tbl_t, cmd));
+#endif /* CONFIG_NEEDS_MANUAL_RELOC */
+
 	/*
 	 * TODO: printing of the clock inforamtion of the board is now
 	 * implemented as part of bdinfo command. Currently only support for
arch/arm/lib/bootm.c +16 -0
index eefb456..4b606e0 100644
@@ -222,6 +222,21 @@ static void boot_prep_linux(bootm_headers_t *images)
 /* Subcommand: GO */
 static void boot_jump_linux(bootm_headers_t *images, int flag)
 {
+#ifdef CONFIG_ARMV8
+	void (*kernel_entry)(void *fdt_addr);
+	int fake = (flag & BOOTM_STATE_OS_FAKE_GO);
+
+	kernel_entry = (void (*)(void *fdt_addr))images->ep;
+
+	debug("## Transferring control to Linux (at address %lx)...\n",
+		(ulong) kernel_entry);
+	bootstage_mark(BOOTSTAGE_ID_RUN_OS);
+
+	announce_and_cleanup(fake);
+
+	if (!fake)
+		kernel_entry(images->ft_addr);
+#else
 	unsigned long machid = gd->bd->bi_arch_number;
 	char *s;
 	void (*kernel_entry)(int zero, int arch, uint params);
@@ -248,6 +263,7 @@ static void boot_jump_linux(bootm_headers_t *images, int flag)
 
 	if (!fake)
 		kernel_entry(0, machid, r2);
+#endif
 }
 
 /* Main Entry point for arm bootm implementation
arch/arm/lib/crt0_64.S new file +116 -0

116 lines not on this page · raw message

arch/arm/lib/interrupts_64.c new file +120 -0

120 lines not on this page · raw message

arch/arm/lib/relocate_64.S new file +57 -0

57 lines not on this page · raw message

common/image.c +1 -0
index 56a5a62..7182549 100644
@@ -81,6 +81,7 @@ static const table_entry_t uimage_arch[] = {
 	{	IH_ARCH_NDS32,		"nds32",	"NDS32",	},
 	{	IH_ARCH_OPENRISC,	"or1k",		"OpenRISC 1000",},
 	{	IH_ARCH_SANDBOX,	"sandbox",	"Sandbox",	},
+	{	IH_ARCH_ARM64,		"arm64",	"AArch64",	},
 	{	-1,			"",		"",		},
 };
 
doc/README.armv8 new file +18 -0
new file mode 100644
index 0000000..a91fbaa
@@ -0,0 +1,18 @@
+Notes:
+
+1. Currenly, u-boot could be running at EL1 or EL2.
+
+2. GOT is used to relocate u-boot and CONFIG_NEEDS_MANUAL_RELOC is needed.
+
+3. Fdt should be placed at a 2-megabyte boundary and within the first 512
+   megabytes from the start of the kernel image. So, fdt_high should be
+   defined specially.
+   Please reference linux/Documentation/arm64/booting.txt for detail.
+
+4. Generic board is supported.
+
+Contributor:
+   Tom Rini       <[email protected]>
+   Scott Wood     <[email protected]>
+   Sharma Bhupesh <[email protected]>
+   Rob Herring    <[email protected]>
examples/standalone/stubs.c +15 -0
index 8fb1765..a58147c 100644
@@ -39,6 +39,20 @@ gd_t *global_data;
 "	bctr\n"				\
 	: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r11");
 #elif defined(CONFIG_ARM)
+#ifdef CONFIG_ARMV8
+/*
+ * x18 holds the pointer to the global_data, x9 is a call-clobbered
+ * register
+ */
+#define EXPORT_FUNC(x) \
+	asm volatile (			\
+"	.globl " #x "\n"		\
+#x ":\n"				\
+"	ldr	x9, [x18, %0]\n"		\
+"	ldr	x9, [x9, %1]\n"		\
+"	br	x9\n"		\
+	: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "x9");
+#else
 /*
  * r8 holds the pointer to the global_data, ip is a call-clobbered
  * register
@@ -50,6 +64,7 @@ gd_t *global_data;
 "	ldr	ip, [r8, %0]\n"		\
 "	ldr	pc, [ip, %1]\n"		\
 	: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "ip");
+#endif
 #elif defined(CONFIG_MIPS)
 /*
  * k0 ($26) holds the pointer to the global_data; t9 ($25) is a call-
include/image.h +1 -0
index f93a393..12262d7 100644
@@ -156,6 +156,7 @@ struct lmb;
 #define IH_ARCH_SANDBOX		19	/* Sandbox architecture (test only) */
 #define IH_ARCH_NDS32	        20	/* ANDES Technology - NDS32  */
 #define IH_ARCH_OPENRISC        21	/* OpenRISC 1000  */
+#define IH_ARCH_ARM64		22	/* ARM64	*/
 
 /*
  * Image Types
Signature · 1 line
1.7.9.5
#2 lore raw

PATCH v10 2/6 board support of vexpress_aemv8a

From: David Feng <[email protected]>

---
 MAINTAINERS                          |    4 +
 board/armltd/dts/vexpress64.dts      |  439 ++++++++++++++++++++++++++++++++++
 board/armltd/vexpress64/Makefile     |   27 +++
 board/armltd/vexpress64/vexpress64.c |   70 ++++++
 boards.cfg                           |    1 +
 include/configs/vexpress_aemv8a.h    |  191 +++++++++++++++
 6 files changed, 732 insertions(+)
 create mode 100644 board/armltd/dts/vexpress64.dts
 create mode 100644 board/armltd/vexpress64/Makefile
 create mode 100644 board/armltd/vexpress64/vexpress64.c
 create mode 100644 include/configs/vexpress_aemv8a.h
MAINTAINERS +4 -0
index 6e50fc4..d142307 100644
@@ -1095,6 +1095,10 @@ Sergey Yanovich <[email protected]>
 
 	lp8x4x		xscale/pxa
 
+David Feng <[email protected]>
+
+	vexpress_aemv8a		ARM ARMV8 (Quad Core)
+
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:
board/armltd/dts/vexpress64.dts new file +439 -0

439 lines not on this page · raw message

board/armltd/vexpress64/Makefile new file +27 -0
new file mode 100644
index 0000000..f907c92
@@ -0,0 +1,27 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= vexpress64.o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
board/armltd/vexpress64/vexpress64.c new file +70 -0

70 lines not on this page · raw message

boards.cfg +1 -0
index 4b1f960..85a92a0 100644
@@ -1196,5 +1196,6 @@ gr_ep2s60                    sparc       leon3       -                   gaisler
 grsim                        sparc       leon3       -                   gaisler
 gr_xc3s_1500                 sparc       leon3       -                   gaisler
 coreboot-x86                 x86         x86        coreboot            chromebook-x86 coreboot    coreboot:SYS_TEXT_BASE=0x01110000
+vexpress_aemv8a              arm         armv8       vexpress64          armltd         -           vexpress_aemv8a:ARMV8
 # Target                     ARCH        CPU         Board name          Vendor	        SoC         Options
 ########################################################################################################################
include/configs/vexpress_aemv8a.h new file +191 -0

191 lines not on this page · raw message

Signature · 1 line
1.7.9.5
#3 lore raw

PATCH v10 3/6 generic board patch of manual reloc and zero gd_t

From: David Feng <[email protected]>

---
 common/board_f.c |   18 +++++++++++-------
 common/board_r.c |   18 ++++++++++++++++++
 2 files changed, 29 insertions(+), 7 deletions(-)
common/board_f.c +11 -7
index 0ada1af..f92a39e 100644
@@ -458,7 +458,7 @@ static int reserve_round_4k(void)
 static int reserve_mmu(void)
 {
 	/* reserve TLB table */
-	gd->arch.tlb_size = 4096 * 4;
+	gd->arch.tlb_size = PGTABLE_SIZE;
 	gd->relocaddr -= gd->arch.tlb_size;
 
 	/* round down to next 64 kB limit */
@@ -610,7 +610,7 @@ static int reserve_stacks(void)
 	 * TODO(sjg at chromium.org): Perhaps create arch_reserve_stack()
 	 * to handle this and put in arch/xxx/lib/stack.c
 	 */
-# ifdef CONFIG_ARM
+# if defined(CONFIG_ARM) && !defined(CONFIG_ARMV8)
 #  ifdef CONFIG_USE_IRQ
 	gd->start_addr_sp -= (CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ);
 	debug("Reserving %zu Bytes for IRQ stack at: %08lx\n",
@@ -807,11 +807,6 @@ static int mark_bootstage(void)
 }
 
 static init_fnc_t init_sequence_f[] = {
-#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC512X) && \
-		!defined(CONFIG_MPC83xx) && !defined(CONFIG_MPC85xx) && \
-		!defined(CONFIG_MPC86xx) && !defined(CONFIG_X86)
-	zero_global_data,
-#endif
 #ifdef CONFIG_SANDBOX
 	setup_ram_buf,
 #endif
@@ -1005,6 +1000,15 @@ void board_init_f(ulong boot_flags)
 	gd = &data;
 #endif
 
+	/*
+	 * Zero gd_t first, otherwise the debug print(if DEBUG defined)
+	 * in initcall_run_list function before zero_global_data is called
+	 * will go wrong.
+	 */
+#ifndef CONFIG_X86
+	zero_global_data();
+#endif
+
 	gd->flags = boot_flags;
 
 	if (initcall_run_list(init_sequence_f))
common/board_r.c +18 -0
index 86ca1cb..862f8f6 100644
@@ -157,6 +157,13 @@ static int initr_reloc_global_data(void)
 	 */
 	gd->env_addr += gd->relocaddr - CONFIG_SYS_MONITOR_BASE;
 #endif
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+	/*
+	 * We have to relocate the command table manually
+	 */
+	fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
+			ll_entry_count(cmd_tbl_t, cmd));
+#endif /* CONFIG_NEEDS_MANUAL_RELOC */
 	return 0;
 }
 
@@ -899,6 +906,7 @@ init_fnc_t init_sequence_r[] = {
 	initr_modem,
 #endif
 	run_main_loop,
+	NULL,
 };
 
 void board_init_r(gd_t *new_gd, ulong dest_addr)
@@ -906,6 +914,16 @@ void board_init_r(gd_t *new_gd, ulong dest_addr)
 #ifndef CONFIG_X86
 	gd = new_gd;
 #endif
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+	/*
+	 * We have to relocate the init_sequence_r table manually
+	 */
+	init_fnc_t	*init_fnc_ptr;
+	for (init_fnc_ptr = init_sequence_r; *init_fnc_ptr; ++init_fnc_ptr)
+		*(unsigned long *)init_fnc_ptr =
+			(unsigned long)(*init_fnc_ptr) + gd->reloc_off;
+#endif /* CONFIG_NEEDS_MANUAL_RELOC */
+
 	if (initcall_run_list(init_sequence_r))
 		hang();
 
Signature · 1 line
1.7.9.5
#4 lore raw

PATCH v10 4/6 64bit initrd start address support

From: David Feng <[email protected]>

---
 common/fdt_support.c |   66 ++++++++++++++++++++++++++------------------------
 1 file changed, 34 insertions(+), 32 deletions(-)
common/fdt_support.c +34 -32
index b034c98..9bc5821 100644
@@ -21,6 +21,34 @@
  */
 DECLARE_GLOBAL_DATA_PTR;
 
+/*
+ * Get cells len in bytes
+ *     if #NNNN-cells property is 2 then len is 8
+ *     otherwise len is 4
+ */
+static int get_cells_len(void *blob, char *nr_cells_name)
+{
+	const fdt32_t *cell;
+
+	cell = fdt_getprop(blob, 0, nr_cells_name, NULL);
+	if (cell && fdt32_to_cpu(*cell) == 2)
+		return 8;
+
+	return 4;
+}
+
+/*
+ * Write a 4 or 8 byte big endian cell
+ */
+static void write_cell(u8 *addr, u64 val, int size)
+{
+	int shift = (size - 1) * 8;
+	while (size-- > 0) {
+		*addr++ = (val >> shift) & 0xff;
+		shift -= 8;
+	}
+}
+
 /**
  * fdt_getprop_u32_default - Find a node and return it's property or a default
  *
@@ -131,9 +159,9 @@ static int fdt_fixup_stdout(void *fdt, int chosenoff)
 
 int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force)
 {
-	int   nodeoffset;
+	int   nodeoffset, addr_cell_len;
 	int   err, j, total;
-	fdt32_t  tmp;
+	fdt64_t  tmp;
 	const char *path;
 	uint64_t addr, size;
 
@@ -170,9 +198,11 @@ int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force)
 		return err;
 	}
 
+	addr_cell_len = get_cells_len(fdt, "#address-cells");
+
 	path = fdt_getprop(fdt, nodeoffset, "linux,initrd-start", NULL);
 	if ((path == NULL) || force) {
-		tmp = cpu_to_fdt32(initrd_start);
+		write_cell((u8 *)&tmp, initrd_start, addr_cell_len);
 		err = fdt_setprop(fdt, nodeoffset,
 			"linux,initrd-start", &tmp, sizeof(tmp));
 		if (err < 0) {
@@ -181,7 +211,7 @@ int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end, int force)
 				fdt_strerror(err));
 			return err;
 		}
-		tmp = cpu_to_fdt32(initrd_end);
+		write_cell((u8 *)&tmp, initrd_end, addr_cell_len);
 		err = fdt_setprop(fdt, nodeoffset,
 			"linux,initrd-end", &tmp, sizeof(tmp));
 		if (err < 0) {
@@ -343,34 +373,6 @@ void do_fixup_by_compat_u32(void *fdt, const char *compat,
 	do_fixup_by_compat(fdt, compat, prop, &tmp, 4, create);
 }
 
-/*
- * Get cells len in bytes
- *     if #NNNN-cells property is 2 then len is 8
- *     otherwise len is 4
- */
-static int get_cells_len(void *blob, char *nr_cells_name)
-{
-	const fdt32_t *cell;
-
-	cell = fdt_getprop(blob, 0, nr_cells_name, NULL);
-	if (cell && fdt32_to_cpu(*cell) == 2)
-		return 8;
-
-	return 4;
-}
-
-/*
- * Write a 4 or 8 byte big endian cell
- */
-static void write_cell(u8 *addr, u64 val, int size)
-{
-	int shift = (size - 1) * 8;
-	while (size-- > 0) {
-		*addr++ = (val >> shift) & 0xff;
-		shift -= 8;
-	}
-}
-
 #ifdef CONFIG_NR_DRAM_BANKS
 #define MEMORY_BANKS_MAX CONFIG_NR_DRAM_BANKS
 #else
Signature · 1 line
1.7.9.5
#5 lore raw

PATCH v10 5/6 remove compiling warnings

From: David Feng <[email protected]>

---
 common/cmd_pxe.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
common/cmd_pxe.c +2 -2
index a2fb50a..df58522 100644
@@ -57,7 +57,7 @@ static int format_mac_pxe(char *outbuf, size_t outbuf_len)
 	uchar ethaddr[6];
 
 	if (outbuf_len < 21) {
-		printf("outbuf is too small (%d < 21)\n", outbuf_len);
+		printf("outbuf is too small (%zd < 21)\n", outbuf_len);
 
 		return -EINVAL;
 	}
@@ -100,7 +100,7 @@ static int get_bootfile_path(const char *file_path, char *bootfile_path,
 	path_len = (last_slash - bootfile) + 1;
 
 	if (bootfile_path_size < path_len) {
-		printf("bootfile_path too small. (%d < %d)\n",
+		printf("bootfile_path too small. (%zd < %zd)\n",
 				bootfile_path_size, path_len);
 
 		return -1;
Signature · 1 line
1.7.9.5
#6 lore raw

PATCH v10 6/6 add weak entry definition

From: David Feng <[email protected]>

---
 include/linux/linkage.h |    4 ++++
 1 file changed, 4 insertions(+)
include/linux/linkage.h +4 -0
index 9ddf830..2a2848a 100644
@@ -49,6 +49,10 @@
 	.globl SYMBOL_NAME(name); \
 	LENTRY(name)
 
+#define WEAK(name) \
+	.weak SYMBOL_NAME(name); \
+	LENTRY(name)
+
 #ifndef END
 #define END(name) \
 	.size name, .-name
Signature · 1 line
1.7.9.5
#7 lore raw

PATCH v10 1/6 core support of arm64

In reply to fenghua at phytium.com.cn
Quoted 4 lines · fenghua at phytium.com.cn

From: David Feng <[email protected]>

---

You've still got CONFIG_ARMV8 in places that should be CONFIG_ARM64

arch/arm/cpu/armv8/exceptions.S line 6

Quoted 12 lines
arch/arm/cpu/armv8/exceptions.S new file +6 -0
new file mode 100644
index 0000000..b2f62c9
@@ -0,0 +1,115 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <[email protected]>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */

Note that Tom said he'd be OK with using GPL2-only code from Linux, as long as it's properly attributed.

Quoted 4 lines
arch/arm/cpu/armv8/exceptions.S new file +4 -0
+2. GOT is used to relocate u-boot and CONFIG_NEEDS_MANUAL_RELOC is needed.
+
+3. Fdt should be placed at a 2-megabyte boundary and within the first 512
+   megabytes from the start of the kernel image. So, fdt_high should be

arch/arm/cpu/armv8/exceptions.S line 20

Quoted 10 lines
arch/arm/cpu/armv8/exceptions.S new file +10 -0
+   defined specially.
+   Please reference linux/Documentation/arm64/booting.txt for detail.
+
+4. Generic board is supported.
+
+Contributor:
+   Tom Rini       <[email protected]>
+   Scott Wood     <[email protected]>
+   Sharma Bhupesh <[email protected]>
+   Rob Herring    <[email protected]>

Should it be:
Bhupesh Sharma <[email protected]>
?

-Scott

#8 lore raw

PATCH v10 1/6 core support of arm64

Dear Scott,

Quoted 7 lines · In message <[email protected]> you wrote:
Quoted 4 lines

+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */

Note that Tom said he'd be OK with using GPL2-only code from Linux, as long as it's properly attributed.

But we do prefer GPL-2.0+ whenever we can have it.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If I have seen further it is by standing on the shoulders of  giants.
              - Isaac Newton, Letter to Robert Hooke, 5 February 1676
author
#9 lore raw

PATCH v10 1/6 core support of arm64

In reply to Scott Wood
Quoted 10 lines

-----????-----
???: "Scott Wood" <[email protected]>
????: 2013?9?17? ???
???: fenghua at phytium.com.cn
??: u-boot at lists.denx.de, trini at ti.com, albert.u.boot at aribaud.net, wd at denx.de, B45370 at freescale.com ??: Re: [PATCH v10 1/6] core support of arm64

Quoted 7 lines
Quoted 4 lines · fenghua at phytium.com.cn

From: David Feng <[email protected]>

---

You've still got CONFIG_ARMV8 in places that should be CONFIG_ARM64

I am hesitate to use CONFIG_ARM64 instead of CONFIG _ARMV8.
I am not sure whether all the CONFIG_ARMV8 could be replaced with CONFIG_ARM64 or CONFIG_ARMV8 and CONFIG_ARMV64 are both needed.
I will take this into account in the next.

Quoted 17 lines

arch/arm/cpu/armv8/exceptions.S line 6

Quoted 13 lines
arch/arm/cpu/armv8/exceptions.S new file +6 -0
new file mode 100644
index 0000000..b2f62c9
@@ -0,0 +1,115 @@
+/*
+ * (C) Copyright 2013
+ * David Feng <[email protected]>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */

Note that Tom said he'd be OK with using GPL2-only code from Linux, as long as it's properly attributed.

Currently, the stack preservation code has no comparability with it's original copy. I think it could be licensed with GPL-2.0+.

Quoted 10 lines
Quoted 10 lines
arch/arm/cpu/armv8/exceptions.S new file +10 -0
+2. GOT is used to relocate u-boot and CONFIG_NEEDS_MANUAL_RELOC is needed.
+
+3. Fdt should be placed at a 2-megabyte boundary and within the first 512
+   megabytes from the start of the kernel image. So, fdt_high should be
+   defined specially.
+   Please reference linux/Documentation/arm64/booting.txt for detail.
+
+4. Generic board is supported.
+
+Contributor:
Quoted 8 lines

arch/arm/cpu/armv8/exceptions.S line 20

Quoted 4 lines
arch/arm/cpu/armv8/exceptions.S new file +4 -0
+   Tom Rini       <[email protected]>
+   Scott Wood     <[email protected]>
+   Sharma Bhupesh <[email protected]>
+   Rob Herring    <[email protected]>

Should it be:
Bhupesh Sharma <[email protected]>
?

It seems that Bhupesh Sharma own two mail box and he usually use B45370 at freescale.com at u-boot mailing list. I will fix it in the next.

Best regards.

Quoted 4 lines

-Scott

#10 lore raw

PATCH v10 1/6 core support of arm64

Quoted 15 lines · FengHua
Quoted 15 lines

-----????-----
???: "Scott Wood" <[email protected]>
????: 2013?9?17? ???
???: fenghua at phytium.com.cn
??: u-boot at lists.denx.de, trini at ti.com, albert.u.boot at aribaud.net, wd at denx.de, B45370 at freescale.com ??: Re: [PATCH v10 1/6] core support of arm64

Quoted 4 lines · fenghua at phytium.com.cn

From: David Feng <[email protected]>

---

Quoted 6 lines
Quoted 1 line

You've still got CONFIG_ARMV8 in places that should be CONFIG_ARM64

I am hesitate to use CONFIG_ARM64 instead of CONFIG _ARMV8.
I am not sure whether all the CONFIG_ARMV8 could be replaced with CONFIG_ARM64 or CONFIG_ARMV8 and CONFIG_ARMV64 are both needed.
I will take this into account in the next.

If it inherently relates to being 64-bit (including ABI issues), use CONFIG_ARM64. If it's something that is new in ARMv8 but isn't specifically due to 64-bitness (e.g. cache stuff, if it's different from ARMv7), and could reasonably be different in a 64-bit ARMv9, then use CONFIG_ARMV8.

-Scott

#11 lore raw

PATCH v10 1/6 core support of arm64

When "64-bit ARMv9" was announced ?

Quoted 40 lines · Scott Wood
Quoted 7 lines · FengHua
Quoted 7 lines

-----????-----
???: "Scott Wood" <[email protected]>
????: 2013?9?17? ???
???: fenghua at phytium.com.cn
??: u-boot at lists.denx.de, trini at ti.com, albert.u.boot at aribaud.net,

wd at denx.de, B45370 at freescale.com

Quoted 5 lines
Quoted 5 lines

??: Re: [PATCH v10 1/6] core support of arm64

Quoted 2 lines · fenghua at phytium.com.cn

From: David Feng <[email protected]>

Quoted 7 lines
Quoted 4 lines
Quoted 2 lines

---

You've still got CONFIG_ARMV8 in places that should be CONFIG_ARM64

I am hesitate to use CONFIG_ARM64 instead of CONFIG _ARMV8. I am not sure whether all the CONFIG_ARMV8 could be replaced with

CONFIG_ARM64

Quoted 2 lines

or CONFIG_ARMV8 and CONFIG_ARMV64 are both needed. I will take this into account in the next.

If it inherently relates to being 64-bit (including ABI issues), use CONFIG_ARM64. If it's something that is new in ARMv8 but isn't specifically due to 64-bitness (e.g. cache stuff, if it's different from ARMv7), and could reasonably be different in a 64-bit ARMv9, then use CONFIG_ARMV8.

-Scott

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Signature · 1 line
-mj
#12 lore raw

PATCH v10 1/6 core support of arm64

Sigh. It wasn't. It's a hypothetical possibility to help guide the decision of whether to classify a piece of code as "arm64" or "armv8".

-Scott

Quoted 58 lines · Mj Embd

When "64-bit ARMv9" was announced ?

On Thu, Sep 26, 2013 at 4:46 AM, Scott Wood <[email protected]> wrote:
On Tue, 2013-09-17 at 16:37 +0800, FengHua wrote:
>
>
> > -----????-----
> > ???: "Scott Wood" <[email protected]>
> > ????: 2013?9?17? ???
> > ???: fenghua at phytium.com.cn
> > ??: u-boot at lists.denx.de, trini at ti.com, albert.u.boot at aribaud.net, wd at denx.de, B45370 at freescale.com > > ??: Re: [PATCH v10 1/6] core support of arm64
> >
> > On Mon, 2013-09-16 at 16:08 +0800, fenghua at phytium.com.cn wrote:
> > > From: David Feng <[email protected]>
> > >
> > > Signed-off-by: David Feng <[email protected]> > > > ---
> >
> > You've still got CONFIG_ARMV8 in places that should be CONFIG_ARM64
>
> I am hesitate to use CONFIG_ARM64 instead of CONFIG _ARMV8. > I am not sure whether all the CONFIG_ARMV8 could be replaced with CONFIG_ARM64
> or CONFIG_ARMV8 and CONFIG_ARMV64 are both needed.
> I will take this into account in the next.

If it inherently relates to being 64-bit (including ABI issues), use
CONFIG_ARM64. If it's something that is new in ARMv8 but isn't
specifically due to 64-bitness (e.g. cache stuff, if it's different from
ARMv7), and could reasonably be different in a 64-bit ARMv9, then use
CONFIG_ARMV8.

-Scott

_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Signature · 1 line
-mj