Skip to contentSkip to conversation

Add support for Voipac X53-DMM-668 module

PATCH In review Rostislav Lisovy 4 participants 13 messages Oct 1, 2013 – Oct 2, 2013

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

cover Add support for Voipac X53-DMM-668 module

This patchset adds support for Voipac X53-DMM-668 module equipped with i.mx53 CPU. More info about the module may be found at:
http://www.voipac.com/#X53-DMM-668

The board specific code enables UART0, NAND flash, Ethernet. The flash_header.c containing DCD configuration data is almost the same (except for one line) as the one in freescale-mx53-smd.

Rostislav Lisovy (4):
i.mx53: voipac: Change machine type identifier
i.mx53: voipac: Add board specific + flash header constructing code i.mx53: voipac: Add barebox environment configuration file i.mx53: voipac: Modify Make- and config-files to enable building of

    mx53-voipac
 arch/arm/boards/Makefile                           |    1 +
 arch/arm/boards/freescale-mx53-voipac/Makefile     |    3 +
 arch/arm/boards/freescale-mx53-voipac/board.c      |  168 ++++++++++++++++++++
 arch/arm/boards/freescale-mx53-voipac/env/config   |   46 ++++++
 .../boards/freescale-mx53-voipac/flash_header.c    |  102 ++++++++++++
 arch/arm/boards/freescale-mx53-voipac/lowlevel.c   |    9 ++
 arch/arm/mach-imx/Kconfig                          |   10 ++
 arch/arm/tools/mach-types                          |    2 +-
 8 files changed, 340 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/Makefile
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/board.c
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/env/config
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/flash_header.c
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/lowlevel.c
Signature · 7 lines
1.7.10.4


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#1 lore raw

PATCH 1/4 i.mx53: voipac: Change machine type identifier

arch/arm/tools/mach-types +1 -1
index 325513f..b4c8228 100644
@@ -3314,7 +3314,7 @@ dimm_imx28		MACH_DIMM_IMX28		DIMM_IMX28		3355
 amk_a4			MACH_AMK_A4		AMK_A4			3356
 gnet_sgme		MACH_GNET_SGME		GNET_SGME		3357
 shooter_u		MACH_SHOOTER_U		SHOOTER_U		3358
-vmx53			MACH_VMX53		VMX53			3359
+voipac			MACH_MX53_VOIPAC	MX53_VOIPAC		3359
 rhino			MACH_RHINO		RHINO			3360
 armlex4210		MACH_ARMLEX4210		ARMLEX4210		3361
 swarcoextmodem		MACH_SWARCOEXTMODEM	SWARCOEXTMODEM		3362
Signature · 7 lines
1.7.10.4


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#2 lore raw

Re: [PATCH 1/4] i.mx53: voipac: Change machine type identifier

Quoted 8 lines · Rostislav Lisovy
arch/arm/tools/mach-types +0 -0
index 325513f..b4c8228 100644

arch/arm/tools/mach-types dimm_imx28 MACH_DIMM_IMX28 DIMM_IMX28 3355 · line 3320

Quoted 8 lines
arch/arm/tools/mach-types +1 -1
@@ -3314,7 +3314,7 @@ dimm_imx28		MACH_DIMM_IMX28		DIMM_IMX28		3355
 amk_a4			MACH_AMK_A4		AMK_A4			3356
 gnet_sgme		MACH_GNET_SGME		GNET_SGME		3357
 shooter_u		MACH_SHOOTER_U		SHOOTER_U		3358
-vmx53			MACH_VMX53		VMX53			3359
+voipac			MACH_MX53_VOIPAC	MX53_VOIPAC		3359
 rhino			MACH_RHINO		RHINO			3360
 armlex4210		MACH_ARMLEX4210		ARMLEX4210		3361
 swarcoextmodem		MACH_SWARCOEXTMODEM	SWARCOEXTMODEM		3362

why that?

Best Regards,
J.

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

maintainer
#3 lore raw

Re: [PATCH 1/4] i.mx53: voipac: Change machine type identifier

In reply to Rostislav Lisovy

arch/arm/tools/mach-types dimm_imx28 MACH_DIMM_IMX28 DIMM_IMX28 3355 · line 3317

Quoted 13 lines · Rostislav Lisovy
arch/arm/tools/mach-types +1 -1
index 325513f..b4c8228 100644
@@ -3314,7 +3314,7 @@ dimm_imx28		MACH_DIMM_IMX28		DIMM_IMX28		3355
 amk_a4			MACH_AMK_A4		AMK_A4			3356
 gnet_sgme		MACH_GNET_SGME		GNET_SGME		3357
 shooter_u		MACH_SHOOTER_U		SHOOTER_U		3358
-vmx53			MACH_VMX53		VMX53			3359
+voipac			MACH_MX53_VOIPAC	MX53_VOIPAC		3359

This file is autogenerated from http://www.arm.linux.org.uk/developer/machines/
and can only be updated from there. No manual changes are allowed since they would be overwritten by the next update.

Sascha

Signature · 9 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#4 lore raw

Re: [PATCH 1/4] i.mx53: voipac: Change machine type identifier

Hello Sascha;
Sorry for my mistake. I checked beforehand, if there is the same record in mach-types in Linux kernel -- there is none, so I thought this file is like 'Barebox specific copy'. I find the name vmx53 confusing, however we have to stick with it.

Regards;
Rostislav

Quoted 19 lines · Sascha Hauer

arch/arm/tools/mach-types dimm_imx28 MACH_DIMM_IMX28 DIMM_IMX28 3355 · line 3317

Quoted 13 lines · Rostislav Lisovy
arch/arm/tools/mach-types +1 -1
index 325513f..b4c8228 100644
@@ -3314,7 +3314,7 @@ dimm_imx28		MACH_DIMM_IMX28		DIMM_IMX28		3355
 amk_a4			MACH_AMK_A4		AMK_A4			3356
 gnet_sgme		MACH_GNET_SGME		GNET_SGME		3357
 shooter_u		MACH_SHOOTER_U		SHOOTER_U		3358
-vmx53			MACH_VMX53		VMX53			3359
+voipac			MACH_MX53_VOIPAC	MX53_VOIPAC		3359

This file is autogenerated from http://www.arm.linux.org.uk/developer/machines/
and can only be updated from there. No manual changes are allowed since they would be overwritten by the next update.

Quoted 2 lines

Sascha

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

#5 lore raw

PATCH 2/4 i.mx53: voipac: Add board specific + flash header constructing code

In reply to Rostislav Lisovy

In board.c enable UART0, NAND flash, Ethernet.
The DCD in flash_header.c is very similar (except for one line) to that from freescale-mx53-smd

---

 create mode 100644 arch/arm/boards/freescale-mx53-voipac/Makefile
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/board.c
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/flash_header.c
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/lowlevel.c
arch/arm/boards/freescale-mx53-voipac/Makefile new file +3 -0
new file mode 100644
index 0000000..d44f697
@@ -0,0 +1,3 @@
+obj-y += board.o
+lwl-y += flash_header.o
+lwl-y += lowlevel.o
arch/arm/boards/freescale-mx53-voipac/board.c new file +168 -0

168 lines not on this page · raw message

arch/arm/boards/freescale-mx53-voipac/flash_header.c new file +102 -0

102 lines not on this page · raw message

arch/arm/boards/freescale-mx53-voipac/lowlevel.c new file +9 -0
new file mode 100644
index 0000000..60c28f7
@@ -0,0 +1,9 @@
+#include <common.h>
+#include <mach/esdctl.h>
+#include <asm/barebox-arm-head.h>
+
+void __naked barebox_arm_reset_vector(void)
+{
+	arm_cpu_lowlevel_init();
+	imx53_barebox_entry(0);
+}
Signature · 7 lines
1.7.10.4


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#6 lore raw

Re: [PATCH 2/4] i.mx53: voipac: Add board specific + flash header constructing code

Quoted 131 lines · Rostislav Lisovy

In board.c enable UART0, NAND flash, Ethernet.
The DCD in flash_header.c is very similar (except for one line) to that from freescale-mx53-smd

---

 create mode 100644 arch/arm/boards/freescale-mx53-voipac/Makefile
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/board.c
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/flash_header.c
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/lowlevel.c
arch/arm/boards/freescale-mx53-voipac/Makefile new file +3 -0
new file mode 100644
index 0000000..d44f697
@@ -0,0 +1,3 @@
+obj-y += board.o
+lwl-y += flash_header.o
+lwl-y += lowlevel.o
arch/arm/boards/freescale-mx53-voipac/board.c new file +105 -0
new file mode 100644
index 0000000..997aa28
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2007 Sascha Hauer, Pengutronix
+ * Copyright (C) 2011 Marc Kleine-Budde <[email protected]>
+ * Copyright (C) 2013 Rostislav Lisovy <[email protected]>, PiKRON s.r.o.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <environment.h>
+#include <fcntl.h>
+#include <fec.h>
+#include <fs.h>
+#include <init.h>
+#include <nand.h>
+#include <net.h>
+#include <partition.h>
+#include <sizes.h>
+
+#include <generated/mach-types.h>
+
+#include <mach/imx53-regs.h>
+#include <mach/iomux-mx53.h>
+#include <mach/devices-imx53.h>
+#include <mach/generic.h>
+#include <mach/gpio.h>
+#include <mach/imx-nand.h>
+#include <mach/iim.h>
+#include <mach/imx5.h>
+
+#include <asm/armlinux.h>
+#include <io.h>
+#include <asm/mmu.h>
+
+#ifdef CONFIG_DRIVER_NET_FEC_IMX
+static struct fec_platform_data fec_info = {
+	.xcv_type = PHY_INTERFACE_MODE_RMII,
+	.phy_addr = 0x1F,
+};
+#endif
+
+#ifdef CONFIG_NAND_IMX
+struct imx_nand_platform_data nand_info = {
+        .width          = 1,
+        .hw_ecc         = 1,
+        .flash_bbt      = 1,
+};
+#endif
+
+static iomux_v3_cfg_t voipac_pads[] = {
+	/* UART1 */
+	MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
+	MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
+	MX53_PAD_PATA_IORDY__UART1_RTS,
+	MX53_PAD_PATA_RESET_B__UART1_CTS,
+
+	/* NAND */
+#ifdef CONFIG_NAND_IMX
+	MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B,
+	MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B,
+	MX53_PAD_NANDF_ALE__EMI_NANDF_ALE,
+	MX53_PAD_NANDF_CLE__EMI_NANDF_CLE,
+	MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B,
+	MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0,
+	MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0,
+	MX53_PAD_PATA_DATA0__EMI_NANDF_D_0,
+	MX53_PAD_PATA_DATA1__EMI_NANDF_D_1,
+	MX53_PAD_PATA_DATA2__EMI_NANDF_D_2,
+	MX53_PAD_PATA_DATA3__EMI_NANDF_D_3,
+	MX53_PAD_PATA_DATA4__EMI_NANDF_D_4,
+	MX53_PAD_PATA_DATA5__EMI_NANDF_D_5,
+	MX53_PAD_PATA_DATA6__EMI_NANDF_D_6,
+	MX53_PAD_PATA_DATA7__EMI_NANDF_D_7,
+#endif
+
+	/* FEC */
+#ifdef CONFIG_DRIVER_NET_FEC_IMX
+	MX53_PAD_FEC_MDC__FEC_MDC,
+	MX53_PAD_FEC_MDIO__FEC_MDIO,
+	MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
+	MX53_PAD_FEC_RX_ER__FEC_RX_ER,
+	MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
+	MX53_PAD_FEC_RXD1__FEC_RDATA_1,
+	MX53_PAD_FEC_RXD0__FEC_RDATA_0,
+	MX53_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX53_PAD_FEC_TXD1__FEC_TDATA_1,
+	MX53_PAD_FEC_TXD0__FEC_TDATA_0,
+	MX53_PAD_GPIO_11__GPIO4_1,	/* FEC_PEN */
+	MX53_PAD_GPIO_12__GPIO4_2,	/* FEC_RST */
+#endif
+
+	MX53_PAD_EIM_A24__GPIO5_4,	/* PSAVE */
+	MX53_PAD_GPIO_17__GPIO7_12,	/* RESET_OUT */
+};
+
+#ifdef CONFIG_DRIVER_NET_FEC_IMX

arch/arm/boards/freescale-mx53-voipac/board.c line 115

Quoted 10 lines
arch/arm/boards/freescale-mx53-voipac/board.c new file +10 -0
+
+#define VMX53_FEC_PEN				IMX_GPIO_NR(4, 1)
+#define VMX53_FEC_RST				IMX_GPIO_NR(4, 2)
+
+static void voipac_fec_reset(void)
+{
+	gpio_direction_output(VMX53_FEC_RST, 0);	/* assert resset */
+	gpio_direction_output(VMX53_FEC_PEN, 1);	/* enable 50MHz oscilator */
+	mdelay(1);
+	gpio_set_value(VMX53_FEC_RST, 1);		/* deassert reset */

you need to request the gpio first

so we can track it with the proper label in gpiolib

arch/arm/boards/freescale-mx53-voipac/board.c line 124

Quoted 9 lines
arch/arm/boards/freescale-mx53-voipac/board.c new file +9 -0
+}
+#endif
+
+#define PSAVE					IMX_GPIO_NR(5, 4)
+#define RESET_OUT				IMX_GPIO_NR(7, 12)
+
+static int voipac_devices_init(void)
+{
+	gpio_direction_output(RESET_OUT, 0);	/* assert RESET_OUT */

why?

arch/arm/boards/freescale-mx53-voipac/board.c line 128

Quoted 4 lines
arch/arm/boards/freescale-mx53-voipac/board.c new file +4 -0
+
+#ifdef CONFIG_DRIVER_NET_FEC_IMX
+        imx53_iim_register_fec_ethaddr();
+        imx53_add_fec(&fec_info);

tab for indeteation

and use IS_ENABLED not ifdef

Quoted 15 lines
arch/arm/boards/freescale-mx53-voipac/board.c new file +15 -0
+	voipac_fec_reset();
+#endif
+
+#ifdef CONFIG_NAND_IMX
+	imx53_add_nand(&nand_info);
+#endif
+
+	armlinux_set_bootparams((void *)0x70000100);
+	armlinux_set_architecture(MACH_TYPE_MX53_VOIPAC);
+
+	gpio_direction_output(RESET_OUT, 1);	/* deassert RESET_OUT */
+
+	return 0;
+}
+device_initcall(voipac_devices_init);

arch/arm/boards/freescale-mx53-voipac/board.c line 153

Quoted 10 lines
arch/arm/boards/freescale-mx53-voipac/board.c new file +10 -0
+
+static int voipac_part_init(void)
+{
+#ifdef CONFIG_NAND_IMX
+	devfs_add_partition("nand0", 0x00000, 0x60000, DEVFS_PARTITION_FIXED, "self_raw");
+	dev_add_bb_dev("self_raw", "self0");
+
+	devfs_add_partition("nand0", 0x60000, 0xA0000, DEVFS_PARTITION_FIXED, "env_raw");
+	dev_add_bb_dev("env_raw", "env0");
+#endif

do this in devices_init

Quoted 146 lines
arch/arm/boards/freescale-mx53-voipac/board.c new file +15 -0
+
+	return 0;
+}
+late_initcall(voipac_part_init);
+
+static int voipac_console_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(voipac_pads, ARRAY_SIZE(voipac_pads));
+
+	imx53_init_lowlevel(800);
+	imx53_add_uart0();
+
+	return 0;
+}
+console_initcall(voipac_console_init);
arch/arm/boards/freescale-mx53-voipac/flash_header.c new file +102 -0
new file mode 100644
index 0000000..c9ae06c
@@ -0,0 +1,102 @@
+/*
+ * Copyright (C) 2011 Marc Kleine-Budde <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <asm/byteorder.h>
+#include <mach/imx-flash-header.h>
+#include <asm/barebox-arm-head.h>
+
+void __naked __flash_header_start go(void)
+{
+	barebox_arm_imx_fcb_head();
+}
+
+struct imx_dcd_v2_entry __dcd_entry_section dcd_entry[] = {
+	{ .addr = cpu_to_be32(0x53fa8554), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa8558), .val = cpu_to_be32(0x00300040), },
+	{ .addr = cpu_to_be32(0x53fa8560), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa8564), .val = cpu_to_be32(0x00300040), },
+	{ .addr = cpu_to_be32(0x53fa8568), .val = cpu_to_be32(0x00300040), },
+	{ .addr = cpu_to_be32(0x53fa8570), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa8574), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa8578), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa857c), .val = cpu_to_be32(0x00300040), },
+	{ .addr = cpu_to_be32(0x53fa8580), .val = cpu_to_be32(0x00300040), },
+	{ .addr = cpu_to_be32(0x53fa8584), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa8588), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa8590), .val = cpu_to_be32(0x00300040), },
+	{ .addr = cpu_to_be32(0x53fa8594), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa86f0), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa86f4), .val = cpu_to_be32(0x00000000), },
+	{ .addr = cpu_to_be32(0x53fa86fc), .val = cpu_to_be32(0x00000000), },
+	{ .addr = cpu_to_be32(0x53fa8714), .val = cpu_to_be32(0x00000000), },
+	{ .addr = cpu_to_be32(0x53fa8718), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa871c), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa8720), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa8724), .val = cpu_to_be32(0x04000000), },
+	{ .addr = cpu_to_be32(0x53fa8728), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa872c), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x63fd9088), .val = cpu_to_be32(0x35343535), },
+	{ .addr = cpu_to_be32(0x63fd9090), .val = cpu_to_be32(0x4d444c44), },
+	{ .addr = cpu_to_be32(0x63fd907c), .val = cpu_to_be32(0x01370138), },
+	{ .addr = cpu_to_be32(0x63fd9080), .val = cpu_to_be32(0x013b013c), },
+	{ .addr = cpu_to_be32(0x63fd9018), .val = cpu_to_be32(0x00011740), },
+	{ .addr = cpu_to_be32(0x63fd9000), .val = cpu_to_be32(0xc4190000), },
+	{ .addr = cpu_to_be32(0x63fd900c), .val = cpu_to_be32(0x9f5152e3), },
+	{ .addr = cpu_to_be32(0x63fd9010), .val = cpu_to_be32(0xb68e8a63), },
+	{ .addr = cpu_to_be32(0x63fd9014), .val = cpu_to_be32(0x01ff00db), },
+	{ .addr = cpu_to_be32(0x63fd902c), .val = cpu_to_be32(0x000026d2), },
+	{ .addr = cpu_to_be32(0x63fd9030), .val = cpu_to_be32(0x009f0e21), },
+	{ .addr = cpu_to_be32(0x63fd9008), .val = cpu_to_be32(0x12273030), },
+	{ .addr = cpu_to_be32(0x63fd9004), .val = cpu_to_be32(0x0002002d), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x00008032), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x00008033), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x00028031), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x052080b0), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x04008040), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x0000803a), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x0000803b), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x00028039), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x05208138), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x04008048), },
+	{ .addr = cpu_to_be32(0x63fd9020), .val = cpu_to_be32(0x00005800), },
+	{ .addr = cpu_to_be32(0x63fd9040), .val = cpu_to_be32(0x04b80003), },
+	{ .addr = cpu_to_be32(0x63fd9058), .val = cpu_to_be32(0x00022227), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x00000000), },
+};
+
+#define APP_DEST	0x70000000
+
+struct imx_flash_header_v2 __flash_header_section flash_header = {
+	.header.tag		= IVT_HEADER_TAG,
+	.header.length		= cpu_to_be16(32),
+	.header.version		= IVT_VERSION,
+
+	.entry			= APP_DEST + 0x1000,
+	.dcd_ptr		= APP_DEST + 0x400 + offsetof(struct imx_flash_header_v2, dcd),
+	.boot_data_ptr		= APP_DEST + 0x400 + offsetof(struct imx_flash_header_v2, boot_data),
+	.self			= APP_DEST + 0x400,
+
+	.boot_data.start	= APP_DEST,
+	.boot_data.size		= DCD_BAREBOX_SIZE,
+
+	.dcd.header.tag		= DCD_HEADER_TAG,
+	.dcd.header.length	= cpu_to_be16(sizeof(struct imx_dcd) + sizeof(dcd_entry)),
+	.dcd.header.version	= DCD_VERSION,
+
+	.dcd.command.tag	= DCD_COMMAND_WRITE_TAG,
+	.dcd.command.length	= cpu_to_be16(sizeof(struct imx_dcd_command) + sizeof(dcd_entry)),
+	.dcd.command.param	= DCD_COMMAND_WRITE_PARAM,
+};
arch/arm/boards/freescale-mx53-voipac/lowlevel.c new file +9 -0
new file mode 100644
index 0000000..60c28f7
@@ -0,0 +1,9 @@
+#include <common.h>
+#include <mach/esdctl.h>
+#include <asm/barebox-arm-head.h>
+
+void __naked barebox_arm_reset_vector(void)
+{
+	arm_cpu_lowlevel_init();
+	imx53_barebox_entry(0);
+}
Signature · 7 lines
1.7.10.4


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

#7 lore raw

Re: [PATCH 2/4] i.mx53: voipac: Add board specific + flash header constructing code

In reply to Rostislav Lisovy
Quoted 200 lines · On Tue, 1 Oct 2013 23:35:20 +0200 Rostislav Lisovy <[email protected]> wrote:

In board.c enable UART0, NAND flash, Ethernet.
The DCD in flash_header.c is very similar (except for one line) to that from freescale-mx53-smd

---

 create mode 100644 arch/arm/boards/freescale-mx53-voipac/Makefile
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/board.c
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/flash_header.c
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/lowlevel.c
arch/arm/boards/freescale-mx53-voipac/Makefile new file +3 -0
new file mode 100644
index 0000000..d44f697
@@ -0,0 +1,3 @@
+obj-y += board.o
+lwl-y += flash_header.o
+lwl-y += lowlevel.o
arch/arm/boards/freescale-mx53-voipac/board.c new file +168 -0
new file mode 100644
index 0000000..997aa28
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2007 Sascha Hauer, Pengutronix
+ * Copyright (C) 2011 Marc Kleine-Budde <[email protected]>
+ * Copyright (C) 2013 Rostislav Lisovy <[email protected]>, PiKRON s.r.o.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <environment.h>
+#include <fcntl.h>
+#include <fec.h>
+#include <fs.h>
+#include <init.h>
+#include <nand.h>
+#include <net.h>
+#include <partition.h>
+#include <sizes.h>
+
+#include <generated/mach-types.h>
+
+#include <mach/imx53-regs.h>
+#include <mach/iomux-mx53.h>
+#include <mach/devices-imx53.h>
+#include <mach/generic.h>
+#include <mach/gpio.h>
+#include <mach/imx-nand.h>
+#include <mach/iim.h>
+#include <mach/imx5.h>
+
+#include <asm/armlinux.h>
+#include <io.h>
+#include <asm/mmu.h>
+
+#ifdef CONFIG_DRIVER_NET_FEC_IMX
+static struct fec_platform_data fec_info = {
+	.xcv_type = PHY_INTERFACE_MODE_RMII,
+	.phy_addr = 0x1F,
+};
+#endif
+
+#ifdef CONFIG_NAND_IMX
+struct imx_nand_platform_data nand_info = {
+        .width          = 1,
+        .hw_ecc         = 1,
+        .flash_bbt      = 1,
+};
+#endif
+
+static iomux_v3_cfg_t voipac_pads[] = {
+	/* UART1 */
+	MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
+	MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
+	MX53_PAD_PATA_IORDY__UART1_RTS,
+	MX53_PAD_PATA_RESET_B__UART1_CTS,
+
+	/* NAND */
+#ifdef CONFIG_NAND_IMX
+	MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B,
+	MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B,
+	MX53_PAD_NANDF_ALE__EMI_NANDF_ALE,
+	MX53_PAD_NANDF_CLE__EMI_NANDF_CLE,
+	MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B,
+	MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0,
+	MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0,
+	MX53_PAD_PATA_DATA0__EMI_NANDF_D_0,
+	MX53_PAD_PATA_DATA1__EMI_NANDF_D_1,
+	MX53_PAD_PATA_DATA2__EMI_NANDF_D_2,
+	MX53_PAD_PATA_DATA3__EMI_NANDF_D_3,
+	MX53_PAD_PATA_DATA4__EMI_NANDF_D_4,
+	MX53_PAD_PATA_DATA5__EMI_NANDF_D_5,
+	MX53_PAD_PATA_DATA6__EMI_NANDF_D_6,
+	MX53_PAD_PATA_DATA7__EMI_NANDF_D_7,
+#endif
+
+	/* FEC */
+#ifdef CONFIG_DRIVER_NET_FEC_IMX
+	MX53_PAD_FEC_MDC__FEC_MDC,
+	MX53_PAD_FEC_MDIO__FEC_MDIO,
+	MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
+	MX53_PAD_FEC_RX_ER__FEC_RX_ER,
+	MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
+	MX53_PAD_FEC_RXD1__FEC_RDATA_1,
+	MX53_PAD_FEC_RXD0__FEC_RDATA_0,
+	MX53_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX53_PAD_FEC_TXD1__FEC_TDATA_1,
+	MX53_PAD_FEC_TXD0__FEC_TDATA_0,
+	MX53_PAD_GPIO_11__GPIO4_1,	/* FEC_PEN */
+	MX53_PAD_GPIO_12__GPIO4_2,	/* FEC_RST */
+#endif
+
+	MX53_PAD_EIM_A24__GPIO5_4,	/* PSAVE */
+	MX53_PAD_GPIO_17__GPIO7_12,	/* RESET_OUT */
+};
+
+#ifdef CONFIG_DRIVER_NET_FEC_IMX
+
+#define VMX53_FEC_PEN				IMX_GPIO_NR(4, 1)
+#define VMX53_FEC_RST				IMX_GPIO_NR(4, 2)
+
+static void voipac_fec_reset(void)
+{
+	gpio_direction_output(VMX53_FEC_RST, 0);	/* assert resset */
+	gpio_direction_output(VMX53_FEC_PEN, 1);	/* enable 50MHz oscilator */
+	mdelay(1);
+	gpio_set_value(VMX53_FEC_RST, 1);		/* deassert reset */
+}
+#endif
+
+#define PSAVE					IMX_GPIO_NR(5, 4)
+#define RESET_OUT				IMX_GPIO_NR(7, 12)
+
+static int voipac_devices_init(void)
+{
+	gpio_direction_output(RESET_OUT, 0);	/* assert RESET_OUT */
+
+#ifdef CONFIG_DRIVER_NET_FEC_IMX
+        imx53_iim_register_fec_ethaddr();
+        imx53_add_fec(&fec_info);
+	voipac_fec_reset();
+#endif
+
+#ifdef CONFIG_NAND_IMX
+	imx53_add_nand(&nand_info);
+#endif
+
+	armlinux_set_bootparams((void *)0x70000100);
+	armlinux_set_architecture(MACH_TYPE_MX53_VOIPAC);
+
+	gpio_direction_output(RESET_OUT, 1);	/* deassert RESET_OUT */
+
+	return 0;
+}
+device_initcall(voipac_devices_init);
+
+static int voipac_part_init(void)
+{
+#ifdef CONFIG_NAND_IMX
+	devfs_add_partition("nand0", 0x00000, 0x60000, DEVFS_PARTITION_FIXED, "self_raw");
+	dev_add_bb_dev("self_raw", "self0");
+
+	devfs_add_partition("nand0", 0x60000, 0xA0000, DEVFS_PARTITION_FIXED, "env_raw");
+	dev_add_bb_dev("env_raw", "env0");
+#endif
+
+	return 0;
+}
+late_initcall(voipac_part_init);
+
+static int voipac_console_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(voipac_pads, ARRAY_SIZE(voipac_pads));
+
+	imx53_init_lowlevel(800);
+	imx53_add_uart0();
+
+	return 0;
+}
+console_initcall(voipac_console_init);
arch/arm/boards/freescale-mx53-voipac/flash_header.c new file +0 -0
new file mode 100644
index 0000000..c9ae06c

arch/arm/boards/freescale-mx53-voipac/flash_header.c line 2

Quoted 2 lines
arch/arm/boards/freescale-mx53-voipac/flash_header.c new file +2 -0
@@ -0,0 +1,102 @@
+/*
+ * Copyright (C) 2011 Marc Kleine-Budde <[email protected]>

This file is rather like freescale-mx53-smd/flash_header.c, but please change copyright header.

Quoted 123 lines
arch/arm/boards/freescale-mx53-voipac/flash_header.c new file +100 -0
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <asm/byteorder.h>
+#include <mach/imx-flash-header.h>
+#include <asm/barebox-arm-head.h>
+
+void __naked __flash_header_start go(void)
+{
+	barebox_arm_imx_fcb_head();
+}
+
+struct imx_dcd_v2_entry __dcd_entry_section dcd_entry[] = {
+	{ .addr = cpu_to_be32(0x53fa8554), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa8558), .val = cpu_to_be32(0x00300040), },
+	{ .addr = cpu_to_be32(0x53fa8560), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa8564), .val = cpu_to_be32(0x00300040), },
+	{ .addr = cpu_to_be32(0x53fa8568), .val = cpu_to_be32(0x00300040), },
+	{ .addr = cpu_to_be32(0x53fa8570), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa8574), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa8578), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa857c), .val = cpu_to_be32(0x00300040), },
+	{ .addr = cpu_to_be32(0x53fa8580), .val = cpu_to_be32(0x00300040), },
+	{ .addr = cpu_to_be32(0x53fa8584), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa8588), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa8590), .val = cpu_to_be32(0x00300040), },
+	{ .addr = cpu_to_be32(0x53fa8594), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa86f0), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa86f4), .val = cpu_to_be32(0x00000000), },
+	{ .addr = cpu_to_be32(0x53fa86fc), .val = cpu_to_be32(0x00000000), },
+	{ .addr = cpu_to_be32(0x53fa8714), .val = cpu_to_be32(0x00000000), },
+	{ .addr = cpu_to_be32(0x53fa8718), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa871c), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa8720), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa8724), .val = cpu_to_be32(0x04000000), },
+	{ .addr = cpu_to_be32(0x53fa8728), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x53fa872c), .val = cpu_to_be32(0x00300000), },
+	{ .addr = cpu_to_be32(0x63fd9088), .val = cpu_to_be32(0x35343535), },
+	{ .addr = cpu_to_be32(0x63fd9090), .val = cpu_to_be32(0x4d444c44), },
+	{ .addr = cpu_to_be32(0x63fd907c), .val = cpu_to_be32(0x01370138), },
+	{ .addr = cpu_to_be32(0x63fd9080), .val = cpu_to_be32(0x013b013c), },
+	{ .addr = cpu_to_be32(0x63fd9018), .val = cpu_to_be32(0x00011740), },
+	{ .addr = cpu_to_be32(0x63fd9000), .val = cpu_to_be32(0xc4190000), },
+	{ .addr = cpu_to_be32(0x63fd900c), .val = cpu_to_be32(0x9f5152e3), },
+	{ .addr = cpu_to_be32(0x63fd9010), .val = cpu_to_be32(0xb68e8a63), },
+	{ .addr = cpu_to_be32(0x63fd9014), .val = cpu_to_be32(0x01ff00db), },
+	{ .addr = cpu_to_be32(0x63fd902c), .val = cpu_to_be32(0x000026d2), },
+	{ .addr = cpu_to_be32(0x63fd9030), .val = cpu_to_be32(0x009f0e21), },
+	{ .addr = cpu_to_be32(0x63fd9008), .val = cpu_to_be32(0x12273030), },
+	{ .addr = cpu_to_be32(0x63fd9004), .val = cpu_to_be32(0x0002002d), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x00008032), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x00008033), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x00028031), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x052080b0), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x04008040), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x0000803a), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x0000803b), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x00028039), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x05208138), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x04008048), },
+	{ .addr = cpu_to_be32(0x63fd9020), .val = cpu_to_be32(0x00005800), },
+	{ .addr = cpu_to_be32(0x63fd9040), .val = cpu_to_be32(0x04b80003), },
+	{ .addr = cpu_to_be32(0x63fd9058), .val = cpu_to_be32(0x00022227), },
+	{ .addr = cpu_to_be32(0x63fd901c), .val = cpu_to_be32(0x00000000), },
+};
+
+#define APP_DEST	0x70000000
+
+struct imx_flash_header_v2 __flash_header_section flash_header = {
+	.header.tag		= IVT_HEADER_TAG,
+	.header.length		= cpu_to_be16(32),
+	.header.version		= IVT_VERSION,
+
+	.entry			= APP_DEST + 0x1000,
+	.dcd_ptr		= APP_DEST + 0x400 + offsetof(struct imx_flash_header_v2, dcd),
+	.boot_data_ptr		= APP_DEST + 0x400 + offsetof(struct imx_flash_header_v2, boot_data),
+	.self			= APP_DEST + 0x400,
+
+	.boot_data.start	= APP_DEST,
+	.boot_data.size		= DCD_BAREBOX_SIZE,
+
+	.dcd.header.tag		= DCD_HEADER_TAG,
+	.dcd.header.length	= cpu_to_be16(sizeof(struct imx_dcd) + sizeof(dcd_entry)),
+	.dcd.header.version	= DCD_VERSION,
+
+	.dcd.command.tag	= DCD_COMMAND_WRITE_TAG,
+	.dcd.command.length	= cpu_to_be16(sizeof(struct imx_dcd_command) + sizeof(dcd_entry)),
+	.dcd.command.param	= DCD_COMMAND_WRITE_PARAM,
+};
arch/arm/boards/freescale-mx53-voipac/lowlevel.c new file +9 -0
new file mode 100644
index 0000000..60c28f7
@@ -0,0 +1,9 @@
+#include <common.h>
+#include <mach/esdctl.h>
+#include <asm/barebox-arm-head.h>
+
+void __naked barebox_arm_reset_vector(void)
+{
+	arm_cpu_lowlevel_init();
+	imx53_barebox_entry(0);
+}
Signature · 7 lines
1.7.10.4


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Signature · 8 lines
-- 
Best regards,
  Antony Pavlov

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#8 lore raw

Re: [PATCH 2/4] i.mx53: voipac: Add board specific + flash header constructing code

Hello Antony;
OK -- I should probably add my name (even if I did not change almost anything).

Regards;
Rostislav

Quoted 12 lines · Antony Pavlov

Review

Quoted 1 line
(quoted diff) +0 -0

b/arch/arm/boards/freescale-mx53-voipac/flash_header.c

arch/arm/boards/freescale-mx53-voipac/flash_header.c line 2

Quoted 7 lines

new file mode 100644
index 0000000..c9ae06c

arch/arm/boards/freescale-mx53-voipac/flash_header.c new file +2 -0
@@ -0,0 +1,102 @@
+/*
+ * Copyright (C) 2011 Marc Kleine-Budde <[email protected]>

This file is rather like freescale-mx53-smd/flash_header.c, but please change copyright header.

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

#9 lore raw

PATCH 3/4 i.mx53: voipac: Add barebox environment configuration file

In reply to Rostislav Lisovy

---

 create mode 100644 arch/arm/boards/freescale-mx53-voipac/env/config
arch/arm/boards/freescale-mx53-voipac/env/config new file +46 -0
new file mode 100644
index 0000000..59432d7
@@ -0,0 +1,46 @@
+#!/bin/sh
+
+global.hostname=imx53-voipac
+eth0.serverip=
+user=
+
+# use 'dhcp' to do dhcp in barebox and in kernel
+# use 'none' if you want to skip kernel ip autoconfiguration
+ip=dhcp
+
+# or set your networking parameters here
+#eth0.ipaddr=a.b.c.d
+#eth0.netmask=a.b.c.d
+#eth0.gateway=a.b.c.d
+#eth0.serverip=a.b.c.d
+
+# can be either 'nfs', 'tftp', 'nor' or 'nand'
+kernel_loc=tftp
+# can be either 'net', 'nor', 'nand' or 'initrd'
+rootfs_loc=net
+
+# can be either 'jffs2' or 'ubifs'
+rootfs_type=ubifs
+rootfsimage=root-${global.hostname}.$rootfs_type
+
+kernelimage=zImage-${global.hostname}
+#kernelimage=uImage-${global.hostname}
+#kernelimage=Image-${global.hostname}
+#kernelimage=Image-${global.hostname}.lzo
+
+if [ -n $user ]; then
+	kernelimage="$user"-"$kernelimage"
+	nfsroot="$eth0.serverip:/home/$user/nfsroot/${global.hostname}"
+	rootfsimage="$user"-"$rootfsimage"
+else
+	nfsroot="$eth0.serverip:/path/to/nfs/root"
+fi
+
+autoboot_timeout=3
+
+bootargs="console=ttymxc0,115200"
+
+disk_parts="256k(barebox)ro,128k(bareboxenv),4M(kernel),-(root)"
+
+# set a fancy prompt (if support is compiled in)
+PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
Signature · 7 lines
1.7.10.4


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#10 lore raw

PATCH 4/4 i.mx53: voipac: Modify Make- and config-files to enable building of mx53-voipac

In reply to Rostislav Lisovy
arch/arm/boards/Makefile +1 -0
index 2e924fd..8070de9 100644
@@ -35,6 +35,7 @@ obj-$(CONFIG_MACH_FREESCALE_MX35_3STACK)	+= freescale-mx35-3-stack/
 obj-$(CONFIG_MACH_FREESCALE_MX51_PDK)		+= freescale-mx51-pdk/
 obj-$(CONFIG_MACH_FREESCALE_MX53_LOCO)		+= freescale-mx53-loco/
 obj-$(CONFIG_MACH_FREESCALE_MX53_SMD)		+= freescale-mx53-smd/
+obj-$(CONFIG_MACH_FREESCALE_MX53_VOIPAC)	+= freescale-mx53-voipac/
 obj-$(CONFIG_MACH_GE863)			+= telit-evk-pro3/
 obj-$(CONFIG_MACH_GK802)			+= gk802/
 obj-$(CONFIG_MACH_GLOBALSCALE_GURUPLUG)		+= globalscale-guruplug/
arch/arm/mach-imx/Kconfig +10 -0
index e087e11..fb9d05c 100644
@@ -20,6 +20,7 @@ config ARCH_TEXT_BASE
 	default 0x97f00000 if MACH_FREESCALE_MX51_PDK
 	default 0x7ff00000 if MACH_FREESCALE_MX53_LOCO
 	default 0x7ff00000 if MACH_FREESCALE_MX53_SMD
+	default 0x7ff00000 if MACH_FREESCALE_MX53_VOIPAC
 	default 0x87f00000 if MACH_GUF_CUPID
 	default 0x93d00000 if MACH_TX25
 	default 0x7ff00000 if MACH_TQMA53
@@ -52,6 +53,7 @@ config BOARDINFO
 	default "Synertronixx scb9328" if MACH_SCB9328
 	default "Garz+Fricke Neso" if MACH_NESO
 	default "Freescale i.MX53 SMD" if MACH_FREESCALE_MX53_SMD
+	default "Voipac i.MX53" if MACH_FREESCALE_MX53_VOIPAC
 	default "Efika MX smartbook" if MACH_EFIKA_MX_SMARTBOOK
 	default "Garz+Fricke Cupid" if MACH_GUF_CUPID
 	default "Ka-Ro tx25" if MACH_TX25
@@ -452,6 +454,14 @@ config MACH_FREESCALE_MX53_SMD
 	bool "Freescale i.MX53 SMD"
 	select ARCH_IMX53
 
+config MACH_FREESCALE_MX53_VOIPAC
+	bool "Voipac i.MX53"
+	select ARCH_IMX53
+	select HAVE_DEFAULT_ENVIRONMENT_NEW
+	help
+	  Say Y here if you are using the Voipac Technologies X53-DMM-668
+	  module equipped with a Freescale i.MX53 Processor
+
 config MACH_TQMA53
 	bool "TQ i.MX53 TQMa53"
 	select ARCH_IMX53
Signature · 7 lines
1.7.10.4


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#11 lore raw
In reply to Rostislav Lisovy
Quoted 9 lines · Rostislav Lisovy

This patchset adds support for Voipac X53-DMM-668 module equipped with i.mx53 CPU. More info about the module may be found at:
http://www.voipac.com/#X53-DMM-668

The board specific code enables UART0, NAND flash, Ethernet. The flash_header.c containing DCD configuration data is almost the same (except for one line) as the one in freescale-mx53-smd.

squash the 4 patch in one please

Quoted 7 lines

Rostislav Lisovy (4):
i.mx53: voipac: Change machine type identifier
i.mx53: voipac: Add board specific + flash header constructing code i.mx53: voipac: Add barebox environment configuration file i.mx53: voipac: Modify Make- and config-files to enable building of

    mx53-voipac
Quoted 23 lines
 arch/arm/boards/Makefile                           |    1 +
 arch/arm/boards/freescale-mx53-voipac/Makefile     |    3 +
 arch/arm/boards/freescale-mx53-voipac/board.c      |  168 ++++++++++++++++++++
 arch/arm/boards/freescale-mx53-voipac/env/config   |   46 ++++++
 .../boards/freescale-mx53-voipac/flash_header.c    |  102 ++++++++++++
 arch/arm/boards/freescale-mx53-voipac/lowlevel.c   |    9 ++
 arch/arm/mach-imx/Kconfig                          |   10 ++
 arch/arm/tools/mach-types                          |    2 +-
 8 files changed, 340 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/Makefile
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/board.c
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/env/config
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/flash_header.c
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/lowlevel.c
Signature · 7 lines
1.7.10.4


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

#12 lore raw
Quoted 5 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 4 lines · Rostislav Lisovy

This patchset adds support for Voipac X53-DMM-668 module equipped with i.mx53 CPU. More info about the module may be found at:
http://www.voipac.com/#X53-DMM-668

Quoted 7 lines
Quoted 5 lines

The board specific code enables UART0, NAND flash, Ethernet. The flash_header.c containing DCD configuration data is almost the same (except for one line) as the one in freescale-mx53-smd.

squash the 4 patch in one please

I mean the 3 board adding patch into one

Quoted 32 lines
Quoted 8 lines

Rostislav Lisovy (4):
i.mx53: voipac: Change machine type identifier
i.mx53: voipac: Add board specific + flash header constructing code i.mx53: voipac: Add barebox environment configuration file i.mx53: voipac: Modify Make- and config-files to enable building of

    mx53-voipac
Quoted 23 lines
 arch/arm/boards/Makefile                           |    1 +
 arch/arm/boards/freescale-mx53-voipac/Makefile     |    3 +
 arch/arm/boards/freescale-mx53-voipac/board.c      |  168 ++++++++++++++++++++
 arch/arm/boards/freescale-mx53-voipac/env/config   |   46 ++++++
 .../boards/freescale-mx53-voipac/flash_header.c    |  102 ++++++++++++
 arch/arm/boards/freescale-mx53-voipac/lowlevel.c   |    9 ++
 arch/arm/mach-imx/Kconfig                          |   10 ++
 arch/arm/tools/mach-types                          |    2 +-
 8 files changed, 340 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/Makefile
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/board.c
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/env/config
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/flash_header.c
 create mode 100644 arch/arm/boards/freescale-mx53-voipac/lowlevel.c
Signature · 7 lines
1.7.10.4


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Quoted 4 lines

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox