Add support for Voipac X53-DMM-668 module
Subsystems (4)
cover Add support for Voipac X53-DMM-668 module
This patchset adds support for Voipac X53-DMM-668 module equipped with i.mx53 CPU. More info about the module may be found at:
http://www.voipac.com/#X53-DMM-668
The board specific code enables UART0, NAND flash, Ethernet. The flash_header.c containing DCD configuration data is almost the same (except for one line) as the one in freescale-mx53-smd.
Rostislav Lisovy (4):
i.mx53: voipac: Change machine type identifier
i.mx53: voipac: Add board specific + flash header constructing code i.mx53: voipac: Add barebox environment configuration file i.mx53: voipac: Modify Make- and config-files to enable building of
mx53-voipac
arch/arm/boards/Makefile | 1 + arch/arm/boards/freescale-mx53-voipac/Makefile | 3 + arch/arm/boards/freescale-mx53-voipac/board.c | 168 ++++++++++++++++++++ arch/arm/boards/freescale-mx53-voipac/env/config | 46 ++++++ .../boards/freescale-mx53-voipac/flash_header.c | 102 ++++++++++++ arch/arm/boards/freescale-mx53-voipac/lowlevel.c | 9 ++ arch/arm/mach-imx/Kconfig | 10 ++ arch/arm/tools/mach-types | 2 +- 8 files changed, 340 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boards/freescale-mx53-voipac/Makefile create mode 100644 arch/arm/boards/freescale-mx53-voipac/board.c create mode 100644 arch/arm/boards/freescale-mx53-voipac/env/config create mode 100644 arch/arm/boards/freescale-mx53-voipac/flash_header.c create mode 100644 arch/arm/boards/freescale-mx53-voipac/lowlevel.c
Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH 1/4 i.mx53: voipac: Change machine type identifier
arch/arm/tools/mach-types +1 -1
@@ -3314,7 +3314,7 @@ dimm_imx28 MACH_DIMM_IMX28 DIMM_IMX28 3355 amk_a4 MACH_AMK_A4 AMK_A4 3356 gnet_sgme MACH_GNET_SGME GNET_SGME 3357 shooter_u MACH_SHOOTER_U SHOOTER_U 3358 -vmx53 MACH_VMX53 VMX53 3359 +voipac MACH_MX53_VOIPAC MX53_VOIPAC 3359 rhino MACH_RHINO RHINO 3360 armlex4210 MACH_ARMLEX4210 ARMLEX4210 3361 swarcoextmodem MACH_SWARCOEXTMODEM SWARCOEXTMODEM 3362
Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Re: [PATCH 1/4] i.mx53: voipac: Change machine type identifier
Quoted 8 lines · Rostislav Lisovy
Signed-off-by Rostislav Lisovy <[email protected]>arch/arm/tools/mach-types +0
-0
arch/arm/tools/mach-types dimm_imx28 MACH_DIMM_IMX28 DIMM_IMX28 3355 · line 3320
Quoted 8 lines
arch/arm/tools/mach-types +1
-1@@ -3314,7 +3314,7 @@ dimm_imx28 MACH_DIMM_IMX28 DIMM_IMX28 3355 amk_a4 MACH_AMK_A4 AMK_A4 3356 gnet_sgme MACH_GNET_SGME GNET_SGME 3357 shooter_u MACH_SHOOTER_U SHOOTER_U 3358 -vmx53 MACH_VMX53 VMX53 3359 +voipac MACH_MX53_VOIPAC MX53_VOIPAC 3359 rhino MACH_RHINO RHINO 3360 armlex4210 MACH_ARMLEX4210 ARMLEX4210 3361 swarcoextmodem MACH_SWARCOEXTMODEM SWARCOEXTMODEM 3362
why that?
Best Regards,
J.
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Sascha Hauer
maintainerRe: [PATCH 1/4] i.mx53: voipac: Change machine type identifier
In reply to Rostislav Lisovyarch/arm/tools/mach-types dimm_imx28 MACH_DIMM_IMX28 DIMM_IMX28 3355 · line 3317
Quoted 13 lines · Rostislav Lisovy
Signed-off-by Rostislav Lisovy <[email protected]>arch/arm/tools/mach-types +1
-1@@ -3314,7 +3314,7 @@ dimm_imx28 MACH_DIMM_IMX28 DIMM_IMX28 3355 amk_a4 MACH_AMK_A4 AMK_A4 3356 gnet_sgme MACH_GNET_SGME GNET_SGME 3357 shooter_u MACH_SHOOTER_U SHOOTER_U 3358 -vmx53 MACH_VMX53 VMX53 3359 +voipac MACH_MX53_VOIPAC MX53_VOIPAC 3359
This file is autogenerated from http://www.arm.linux.org.uk/developer/machines/
and can only be updated from there. No manual changes are allowed since they would be overwritten by the next update.
Sascha
Signature · 9 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Re: [PATCH 1/4] i.mx53: voipac: Change machine type identifier
Hello Sascha;
Sorry for my mistake. I checked beforehand, if there is the same record in mach-types in Linux kernel -- there is none, so I thought this file is like 'Barebox specific copy'. I find the name vmx53 confusing, however we have to stick with it.
Regards;
Rostislav
Quoted 19 lines · Sascha Hauer
arch/arm/tools/mach-types dimm_imx28 MACH_DIMM_IMX28 DIMM_IMX28 3355 · line 3317
Quoted 13 lines · Rostislav Lisovy
Signed-off-by Rostislav Lisovy <[email protected]>arch/arm/tools/mach-types +1
-1@@ -3314,7 +3314,7 @@ dimm_imx28 MACH_DIMM_IMX28 DIMM_IMX28 3355 amk_a4 MACH_AMK_A4 AMK_A4 3356 gnet_sgme MACH_GNET_SGME GNET_SGME 3357 shooter_u MACH_SHOOTER_U SHOOTER_U 3358 -vmx53 MACH_VMX53 VMX53 3359 +voipac MACH_MX53_VOIPAC MX53_VOIPAC 3359This file is autogenerated from http://www.arm.linux.org.uk/developer/machines/
and can only be updated from there. No manual changes are allowed since they would be overwritten by the next update.
Quoted 2 lines
Sascha
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
PATCH 2/4 i.mx53: voipac: Add board specific + flash header constructing code
In reply to Rostislav LisovyIn board.c enable UART0, NAND flash, Ethernet.
The DCD in flash_header.c is very similar (except for one line) to that from freescale-mx53-smd
---
create mode 100644 arch/arm/boards/freescale-mx53-voipac/Makefile create mode 100644 arch/arm/boards/freescale-mx53-voipac/board.c create mode 100644 arch/arm/boards/freescale-mx53-voipac/flash_header.c create mode 100644 arch/arm/boards/freescale-mx53-voipac/lowlevel.c
arch/arm/boards/freescale-mx53-voipac/Makefile new file +3 -0
@@ -0,0 +1,3 @@ +obj-y += board.o +lwl-y += flash_header.o +lwl-y += lowlevel.o
arch/arm/boards/freescale-mx53-voipac/board.c new file +168 -0
168 lines not on this page · raw message
arch/arm/boards/freescale-mx53-voipac/flash_header.c new file +102 -0
102 lines not on this page · raw message
arch/arm/boards/freescale-mx53-voipac/lowlevel.c new file +9 -0
@@ -0,0 +1,9 @@ +#include <common.h> +#include <mach/esdctl.h> +#include <asm/barebox-arm-head.h> + +void __naked barebox_arm_reset_vector (void ) +{ +arm_cpu_lowlevel_init (); +imx53_barebox_entry (0 ); +}
Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Re: [PATCH 2/4] i.mx53: voipac: Add board specific + flash header constructing code
Quoted 131 lines · Rostislav Lisovy
In
board.cenable UART0, NAND flash, Ethernet.
The DCD inflash_header.cis very similar (except for one line) to that from freescale-mx53-smdSigned-off-by Rostislav Lisovy <[email protected]>---
create mode 100644 arch/arm/boards/freescale-mx53-voipac/Makefile create mode 100644 arch/arm/boards/freescale-mx53-voipac/board.c create mode 100644 arch/arm/boards/freescale-mx53-voipac/flash_header.c create mode 100644 arch/arm/boards/freescale-mx53-voipac/lowlevel.carch/arm/boards/freescale-mx53-voipac/Makefile new file +3
-0@@ -0,0 +1,3 @@ +obj-y += board.o +lwl-y += flash_header.o +lwl-y += lowlevel.oarch/arm/boards/freescale-mx53-voipac/board.c new file +105
-0@@ -0,0 +1,168 @@ +/* +* Copyright (C) 2007 Sascha Hauer, Pengutronix +* Copyright (C) 2011 Marc Kleine-Budde <[email protected]> +* Copyright (C) 2013 Rostislav Lisovy <[email protected]>, PiKRON s.r.o. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +*/ + +#include <common.h> +#include <environment.h> +#include <fcntl.h> +#include <fec.h> +#include <fs.h> +#include <init.h> +#include <nand.h> +#include <net.h> +#include <partition.h> +#include <sizes.h> + +#include <generated/mach-types.h> + +#include <mach/imx53-regs.h> +#include <mach/iomux-mx53.h> +#include <mach/devices-imx53.h> +#include <mach/generic.h> +#include <mach/gpio.h> +#include <mach/imx-nand.h> +#include <mach/iim.h> +#include <mach/imx5.h> + +#include <asm/armlinux.h> +#include <io.h> +#include <asm/mmu.h> + +#ifdef CONFIG_DRIVER_NET_FEC_IMX +static struct fec_platform_data fec_info = { + .xcv_type =PHY_INTERFACE_MODE_RMII , + .phy_addr =0x1F , +}; +#endif + +#ifdef CONFIG_NAND_IMX +struct imx_nand_platform_data nand_info = { + .width =1 , + .hw_ecc =1 , + .flash_bbt =1 , +}; +#endif + +static iomux_v3_cfg_t voipac_pads[] = { +/* UART1 */ +MX53_PAD_PATA_DIOW__UART1_TXD_MUX , +MX53_PAD_PATA_DMACK__UART1_RXD_MUX , +MX53_PAD_PATA_IORDY__UART1_RTS , +MX53_PAD_PATA_RESET_B__UART1_CTS , + +/* NAND */ +#ifdef CONFIG_NAND_IMX +MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B , +MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B , +MX53_PAD_NANDF_ALE__EMI_NANDF_ALE , +MX53_PAD_NANDF_CLE__EMI_NANDF_CLE , +MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B , +MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 , +MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 , +MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 , +MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 , +MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 , +MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 , +MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 , +MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 , +MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 , +MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 , +#endif + + /* FEC */ +#ifdef CONFIG_DRIVER_NET_FEC_IMX +MX53_PAD_FEC_MDC__FEC_MDC , +MX53_PAD_FEC_MDIO__FEC_MDIO , +MX53_PAD_FEC_REF_CLK__FEC_TX_CLK , +MX53_PAD_FEC_RX_ER__FEC_RX_ER , +MX53_PAD_FEC_CRS_DV__FEC_RX_DV , +MX53_PAD_FEC_RXD1__FEC_RDATA_1 , +MX53_PAD_FEC_RXD0__FEC_RDATA_0 , +MX53_PAD_FEC_TX_EN__FEC_TX_EN , +MX53_PAD_FEC_TXD1__FEC_TDATA_1 , +MX53_PAD_FEC_TXD0__FEC_TDATA_0 , +MX53_PAD_GPIO_11__GPIO4_1 ,/* FEC_PEN */ +MX53_PAD_GPIO_12__GPIO4_2 ,/* FEC_RST */ +#endif + +MX53_PAD_EIM_A24__GPIO5_4 ,/* PSAVE */ +MX53_PAD_GPIO_17__GPIO7_12 ,/* RESET_OUT */ +}; + +#ifdef CONFIG_DRIVER_NET_FEC_IMX
arch/arm/boards/freescale-mx53-voipac/board.c line 115
Quoted 10 lines
arch/arm/boards/freescale-mx53-voipac/board.c new file +10
-0+ +#define VMX53_FEC_PEN IMX_GPIO_NR(4, 1) +#define VMX53_FEC_RST IMX_GPIO_NR(4, 2) + +static void voipac_fec_reset (void ) +{ +gpio_direction_output (VMX53_FEC_RST ,0 );/* assert resset */ +gpio_direction_output (VMX53_FEC_PEN ,1 );/* enable 50MHz oscilator */ +mdelay (1 ); +gpio_set_value (VMX53_FEC_RST ,1 );/* deassert reset */
you need to request the gpio first
so we can track it with the proper label in gpiolib
arch/arm/boards/freescale-mx53-voipac/board.c line 124
Quoted 9 lines
arch/arm/boards/freescale-mx53-voipac/board.c new file +9
-0+} +#endif + +#define PSAVE IMX_GPIO_NR(5, 4) +#define RESET_OUT IMX_GPIO_NR(7, 12) + +static int voipac_devices_init (void ) +{ +gpio_direction_output (RESET_OUT ,0 );/* assert RESET_OUT */
why?
arch/arm/boards/freescale-mx53-voipac/board.c line 128
Quoted 4 lines
arch/arm/boards/freescale-mx53-voipac/board.c new file +4
-0+ +#ifdef CONFIG_DRIVER_NET_FEC_IMX +imx53_iim_register_fec_ethaddr (); +imx53_add_fec (&fec_info);
tab for indeteation
and use IS_ENABLED not ifdef
Quoted 15 lines
arch/arm/boards/freescale-mx53-voipac/board.c new file +15
-0+voipac_fec_reset (); +#endif + +#ifdef CONFIG_NAND_IMX +imx53_add_nand (&nand_info); +#endif + +armlinux_set_bootparams ((void *)0x70000100 ); +armlinux_set_architecture (MACH_TYPE_MX53_VOIPAC ); + +gpio_direction_output (RESET_OUT ,1 );/* deassert RESET_OUT */ + +return 0 ; +} +device_initcall (voipac_devices_init);
arch/arm/boards/freescale-mx53-voipac/board.c line 153
Quoted 10 lines
arch/arm/boards/freescale-mx53-voipac/board.c new file +10
-0+ +static int voipac_part_init (void ) +{ +#ifdef CONFIG_NAND_IMX +devfs_add_partition ("nand0" ,0x00000 ,0x60000 ,DEVFS_PARTITION_FIXED ,"self_raw" ); +dev_add_bb_dev ("self_raw" ,"self0" ); + +devfs_add_partition ("nand0" ,0x60000 ,0xA0000 ,DEVFS_PARTITION_FIXED ,"env_raw" ); +dev_add_bb_dev ("env_raw" ,"env0" ); +#endif
do this in devices_init
Quoted 146 lines
arch/arm/boards/freescale-mx53-voipac/board.c new file +15
-0+ +return 0 ; +} +late_initcall (voipac_part_init); + +static int voipac_console_init (void ) +{ +mxc_iomux_v3_setup_multiple_pads (voipac_pads,ARRAY_SIZE (voipac_pads)); + +imx53_init_lowlevel (800 ); +imx53_add_uart0 (); + +return 0 ; +} +console_initcall (voipac_console_init);arch/arm/boards/freescale-mx53-voipac/flash_header.c new file +102
-0@@ -0,0 +1,102 @@ +/* +* Copyright (C) 2011 Marc Kleine-Budde <[email protected]> +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +*/ + +#include <common.h> +#include <asm/byteorder.h> +#include <mach/imx-flash-header.h> +#include <asm/barebox-arm-head.h> + +void __naked __flash_header_start go(void) +{ +barebox_arm_imx_fcb_head (); +} + +struct imx_dcd_v2_entry __dcd_entry_section dcd_entry[] = { + { .addr =cpu_to_be32 (0x53fa8554 ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa8558 ), .val =cpu_to_be32 (0x00300040 ), }, + { .addr =cpu_to_be32 (0x53fa8560 ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa8564 ), .val =cpu_to_be32 (0x00300040 ), }, + { .addr =cpu_to_be32 (0x53fa8568 ), .val =cpu_to_be32 (0x00300040 ), }, + { .addr =cpu_to_be32 (0x53fa8570 ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa8574 ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa8578 ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa857c ), .val =cpu_to_be32 (0x00300040 ), }, + { .addr =cpu_to_be32 (0x53fa8580 ), .val =cpu_to_be32 (0x00300040 ), }, + { .addr =cpu_to_be32 (0x53fa8584 ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa8588 ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa8590 ), .val =cpu_to_be32 (0x00300040 ), }, + { .addr =cpu_to_be32 (0x53fa8594 ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa86f0 ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa86f4 ), .val =cpu_to_be32 (0x00000000 ), }, + { .addr =cpu_to_be32 (0x53fa86fc ), .val =cpu_to_be32 (0x00000000 ), }, + { .addr =cpu_to_be32 (0x53fa8714 ), .val =cpu_to_be32 (0x00000000 ), }, + { .addr =cpu_to_be32 (0x53fa8718 ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa871c ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa8720 ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa8724 ), .val =cpu_to_be32 (0x04000000 ), }, + { .addr =cpu_to_be32 (0x53fa8728 ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa872c ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x63fd9088 ), .val =cpu_to_be32 (0x35343535 ), }, + { .addr =cpu_to_be32 (0x63fd9090 ), .val =cpu_to_be32 (0x4d444c44 ), }, + { .addr =cpu_to_be32 (0x63fd907c ), .val =cpu_to_be32 (0x01370138 ), }, + { .addr =cpu_to_be32 (0x63fd9080 ), .val =cpu_to_be32 (0x013b013c ), }, + { .addr =cpu_to_be32 (0x63fd9018 ), .val =cpu_to_be32 (0x00011740 ), }, + { .addr =cpu_to_be32 (0x63fd9000 ), .val =cpu_to_be32 (0xc4190000 ), }, + { .addr =cpu_to_be32 (0x63fd900c ), .val =cpu_to_be32 (0x9f5152e3 ), }, + { .addr =cpu_to_be32 (0x63fd9010 ), .val =cpu_to_be32 (0xb68e8a63 ), }, + { .addr =cpu_to_be32 (0x63fd9014 ), .val =cpu_to_be32 (0x01ff00db ), }, + { .addr =cpu_to_be32 (0x63fd902c ), .val =cpu_to_be32 (0x000026d2 ), }, + { .addr =cpu_to_be32 (0x63fd9030 ), .val =cpu_to_be32 (0x009f0e21 ), }, + { .addr =cpu_to_be32 (0x63fd9008 ), .val =cpu_to_be32 (0x12273030 ), }, + { .addr =cpu_to_be32 (0x63fd9004 ), .val =cpu_to_be32 (0x0002002d ), }, + { .addr =cpu_to_be32 (0x63fd901c ), .val =cpu_to_be32 (0x00008032 ), }, + { .addr =cpu_to_be32 (0x63fd901c ), .val =cpu_to_be32 (0x00008033 ), }, + { .addr =cpu_to_be32 (0x63fd901c ), .val =cpu_to_be32 (0x00028031 ), }, + { .addr =cpu_to_be32 (0x63fd901c ), .val =cpu_to_be32 (0x052080b0 ), }, + { .addr =cpu_to_be32 (0x63fd901c ), .val =cpu_to_be32 (0x04008040 ), }, + { .addr =cpu_to_be32 (0x63fd901c ), .val =cpu_to_be32 (0x0000803a ), }, + { .addr =cpu_to_be32 (0x63fd901c ), .val =cpu_to_be32 (0x0000803b ), }, + { .addr =cpu_to_be32 (0x63fd901c ), .val =cpu_to_be32 (0x00028039 ), }, + { .addr =cpu_to_be32 (0x63fd901c ), .val =cpu_to_be32 (0x05208138 ), }, + { .addr =cpu_to_be32 (0x63fd901c ), .val =cpu_to_be32 (0x04008048 ), }, + { .addr =cpu_to_be32 (0x63fd9020 ), .val =cpu_to_be32 (0x00005800 ), }, + { .addr =cpu_to_be32 (0x63fd9040 ), .val =cpu_to_be32 (0x04b80003 ), }, + { .addr =cpu_to_be32 (0x63fd9058 ), .val =cpu_to_be32 (0x00022227 ), }, + { .addr =cpu_to_be32 (0x63fd901c ), .val =cpu_to_be32 (0x00000000 ), }, +}; + +#define APP_DEST 0x70000000 + +struct imx_flash_header_v2 __flash_header_section flash_header = { + .header.tag =IVT_HEADER_TAG , + .header.length =cpu_to_be16 (32 ), + .header.version =IVT_VERSION , + + .entry =APP_DEST +0x1000 , + .dcd_ptr =APP_DEST +0x400 + offsetof(struct imx_flash_header_v2 , dcd), + .boot_data_ptr =APP_DEST +0x400 + offsetof(struct imx_flash_header_v2 , boot_data), + .self =APP_DEST +0x400 , + + .boot_data.start =APP_DEST , + .boot_data.size =DCD_BAREBOX_SIZE , + + .dcd.header.tag =DCD_HEADER_TAG , + .dcd.header.length =cpu_to_be16 (sizeof (struct imx_dcd ) +sizeof (dcd_entry)), + .dcd.header.version =DCD_VERSION , + + .dcd.command.tag =DCD_COMMAND_WRITE_TAG , + .dcd.command.length =cpu_to_be16 (sizeof (struct imx_dcd_command ) +sizeof (dcd_entry)), + .dcd.command.param =DCD_COMMAND_WRITE_PARAM , +};arch/arm/boards/freescale-mx53-voipac/lowlevel.c new file +9
-0@@ -0,0 +1,9 @@ +#include <common.h> +#include <mach/esdctl.h> +#include <asm/barebox-arm-head.h> + +void __naked barebox_arm_reset_vector (void ) +{ +arm_cpu_lowlevel_init (); +imx53_barebox_entry (0 ); +}Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Re: [PATCH 2/4] i.mx53: voipac: Add board specific + flash header constructing code
In reply to Rostislav LisovyQuoted 200 lines · On Tue, 1 Oct 2013 23:35:20 +0200 Rostislav Lisovy <[email protected]> wrote:
In
board.cenable UART0, NAND flash, Ethernet.
The DCD inflash_header.cis very similar (except for one line) to that from freescale-mx53-smdSigned-off-by Rostislav Lisovy <[email protected]>---
create mode 100644 arch/arm/boards/freescale-mx53-voipac/Makefile create mode 100644 arch/arm/boards/freescale-mx53-voipac/board.c create mode 100644 arch/arm/boards/freescale-mx53-voipac/flash_header.c create mode 100644 arch/arm/boards/freescale-mx53-voipac/lowlevel.carch/arm/boards/freescale-mx53-voipac/Makefile new file +3
-0@@ -0,0 +1,3 @@ +obj-y += board.o +lwl-y += flash_header.o +lwl-y += lowlevel.oarch/arm/boards/freescale-mx53-voipac/board.c new file +168
-0@@ -0,0 +1,168 @@ +/* +* Copyright (C) 2007 Sascha Hauer, Pengutronix +* Copyright (C) 2011 Marc Kleine-Budde <[email protected]> +* Copyright (C) 2013 Rostislav Lisovy <[email protected]>, PiKRON s.r.o. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +*/ + +#include <common.h> +#include <environment.h> +#include <fcntl.h> +#include <fec.h> +#include <fs.h> +#include <init.h> +#include <nand.h> +#include <net.h> +#include <partition.h> +#include <sizes.h> + +#include <generated/mach-types.h> + +#include <mach/imx53-regs.h> +#include <mach/iomux-mx53.h> +#include <mach/devices-imx53.h> +#include <mach/generic.h> +#include <mach/gpio.h> +#include <mach/imx-nand.h> +#include <mach/iim.h> +#include <mach/imx5.h> + +#include <asm/armlinux.h> +#include <io.h> +#include <asm/mmu.h> + +#ifdef CONFIG_DRIVER_NET_FEC_IMX +static struct fec_platform_data fec_info = { + .xcv_type =PHY_INTERFACE_MODE_RMII , + .phy_addr =0x1F , +}; +#endif + +#ifdef CONFIG_NAND_IMX +struct imx_nand_platform_data nand_info = { + .width =1 , + .hw_ecc =1 , + .flash_bbt =1 , +}; +#endif + +static iomux_v3_cfg_t voipac_pads[] = { +/* UART1 */ +MX53_PAD_PATA_DIOW__UART1_TXD_MUX , +MX53_PAD_PATA_DMACK__UART1_RXD_MUX , +MX53_PAD_PATA_IORDY__UART1_RTS , +MX53_PAD_PATA_RESET_B__UART1_CTS , + +/* NAND */ +#ifdef CONFIG_NAND_IMX +MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B , +MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B , +MX53_PAD_NANDF_ALE__EMI_NANDF_ALE , +MX53_PAD_NANDF_CLE__EMI_NANDF_CLE , +MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B , +MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 , +MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 , +MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 , +MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 , +MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 , +MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 , +MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 , +MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 , +MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 , +MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 , +#endif + + /* FEC */ +#ifdef CONFIG_DRIVER_NET_FEC_IMX +MX53_PAD_FEC_MDC__FEC_MDC , +MX53_PAD_FEC_MDIO__FEC_MDIO , +MX53_PAD_FEC_REF_CLK__FEC_TX_CLK , +MX53_PAD_FEC_RX_ER__FEC_RX_ER , +MX53_PAD_FEC_CRS_DV__FEC_RX_DV , +MX53_PAD_FEC_RXD1__FEC_RDATA_1 , +MX53_PAD_FEC_RXD0__FEC_RDATA_0 , +MX53_PAD_FEC_TX_EN__FEC_TX_EN , +MX53_PAD_FEC_TXD1__FEC_TDATA_1 , +MX53_PAD_FEC_TXD0__FEC_TDATA_0 , +MX53_PAD_GPIO_11__GPIO4_1 ,/* FEC_PEN */ +MX53_PAD_GPIO_12__GPIO4_2 ,/* FEC_RST */ +#endif + +MX53_PAD_EIM_A24__GPIO5_4 ,/* PSAVE */ +MX53_PAD_GPIO_17__GPIO7_12 ,/* RESET_OUT */ +}; + +#ifdef CONFIG_DRIVER_NET_FEC_IMX + +#define VMX53_FEC_PEN IMX_GPIO_NR(4, 1) +#define VMX53_FEC_RST IMX_GPIO_NR(4, 2) + +static void voipac_fec_reset (void ) +{ +gpio_direction_output (VMX53_FEC_RST ,0 );/* assert resset */ +gpio_direction_output (VMX53_FEC_PEN ,1 );/* enable 50MHz oscilator */ +mdelay (1 ); +gpio_set_value (VMX53_FEC_RST ,1 );/* deassert reset */ +} +#endif + +#define PSAVE IMX_GPIO_NR(5, 4) +#define RESET_OUT IMX_GPIO_NR(7, 12) + +static int voipac_devices_init (void ) +{ +gpio_direction_output (RESET_OUT ,0 );/* assert RESET_OUT */ + +#ifdef CONFIG_DRIVER_NET_FEC_IMX +imx53_iim_register_fec_ethaddr (); +imx53_add_fec (&fec_info); +voipac_fec_reset (); +#endif + +#ifdef CONFIG_NAND_IMX +imx53_add_nand (&nand_info); +#endif + +armlinux_set_bootparams ((void *)0x70000100 ); +armlinux_set_architecture (MACH_TYPE_MX53_VOIPAC ); + +gpio_direction_output (RESET_OUT ,1 );/* deassert RESET_OUT */ + +return 0 ; +} +device_initcall (voipac_devices_init); + +static int voipac_part_init (void ) +{ +#ifdef CONFIG_NAND_IMX +devfs_add_partition ("nand0" ,0x00000 ,0x60000 ,DEVFS_PARTITION_FIXED ,"self_raw" ); +dev_add_bb_dev ("self_raw" ,"self0" ); + +devfs_add_partition ("nand0" ,0x60000 ,0xA0000 ,DEVFS_PARTITION_FIXED ,"env_raw" ); +dev_add_bb_dev ("env_raw" ,"env0" ); +#endif + +return 0 ; +} +late_initcall (voipac_part_init); + +static int voipac_console_init (void ) +{ +mxc_iomux_v3_setup_multiple_pads (voipac_pads,ARRAY_SIZE (voipac_pads)); + +imx53_init_lowlevel (800 ); +imx53_add_uart0 (); + +return 0 ; +} +console_initcall (voipac_console_init);arch/arm/boards/freescale-mx53-voipac/flash_header.c new file +0
-0
arch/arm/boards/freescale-mx53-voipac/flash_header.c line 2
Quoted 2 lines
arch/arm/boards/freescale-mx53-voipac/flash_header.c new file +2
-0@@ -0,0 +1,102 @@ +/* +* Copyright (C) 2011 Marc Kleine-Budde <[email protected]>
This file is rather like freescale-mx53-smd/flash_header.c, but please change copyright header.
Quoted 123 lines
arch/arm/boards/freescale-mx53-voipac/flash_header.c new file +100
-0+* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +*/ + +#include <common.h> +#include <asm/byteorder.h> +#include <mach/imx-flash-header.h> +#include <asm/barebox-arm-head.h> + +void __naked __flash_header_start go(void) +{ +barebox_arm_imx_fcb_head (); +} + +struct imx_dcd_v2_entry __dcd_entry_section dcd_entry[] = { + { .addr =cpu_to_be32 (0x53fa8554 ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa8558 ), .val =cpu_to_be32 (0x00300040 ), }, + { .addr =cpu_to_be32 (0x53fa8560 ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa8564 ), .val =cpu_to_be32 (0x00300040 ), }, + { .addr =cpu_to_be32 (0x53fa8568 ), .val =cpu_to_be32 (0x00300040 ), }, + { .addr =cpu_to_be32 (0x53fa8570 ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa8574 ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa8578 ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa857c ), .val =cpu_to_be32 (0x00300040 ), }, + { .addr =cpu_to_be32 (0x53fa8580 ), .val =cpu_to_be32 (0x00300040 ), }, + { .addr =cpu_to_be32 (0x53fa8584 ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa8588 ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa8590 ), .val =cpu_to_be32 (0x00300040 ), }, + { .addr =cpu_to_be32 (0x53fa8594 ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa86f0 ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa86f4 ), .val =cpu_to_be32 (0x00000000 ), }, + { .addr =cpu_to_be32 (0x53fa86fc ), .val =cpu_to_be32 (0x00000000 ), }, + { .addr =cpu_to_be32 (0x53fa8714 ), .val =cpu_to_be32 (0x00000000 ), }, + { .addr =cpu_to_be32 (0x53fa8718 ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa871c ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa8720 ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa8724 ), .val =cpu_to_be32 (0x04000000 ), }, + { .addr =cpu_to_be32 (0x53fa8728 ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x53fa872c ), .val =cpu_to_be32 (0x00300000 ), }, + { .addr =cpu_to_be32 (0x63fd9088 ), .val =cpu_to_be32 (0x35343535 ), }, + { .addr =cpu_to_be32 (0x63fd9090 ), .val =cpu_to_be32 (0x4d444c44 ), }, + { .addr =cpu_to_be32 (0x63fd907c ), .val =cpu_to_be32 (0x01370138 ), }, + { .addr =cpu_to_be32 (0x63fd9080 ), .val =cpu_to_be32 (0x013b013c ), }, + { .addr =cpu_to_be32 (0x63fd9018 ), .val =cpu_to_be32 (0x00011740 ), }, + { .addr =cpu_to_be32 (0x63fd9000 ), .val =cpu_to_be32 (0xc4190000 ), }, + { .addr =cpu_to_be32 (0x63fd900c ), .val =cpu_to_be32 (0x9f5152e3 ), }, + { .addr =cpu_to_be32 (0x63fd9010 ), .val =cpu_to_be32 (0xb68e8a63 ), }, + { .addr =cpu_to_be32 (0x63fd9014 ), .val =cpu_to_be32 (0x01ff00db ), }, + { .addr =cpu_to_be32 (0x63fd902c ), .val =cpu_to_be32 (0x000026d2 ), }, + { .addr =cpu_to_be32 (0x63fd9030 ), .val =cpu_to_be32 (0x009f0e21 ), }, + { .addr =cpu_to_be32 (0x63fd9008 ), .val =cpu_to_be32 (0x12273030 ), }, + { .addr =cpu_to_be32 (0x63fd9004 ), .val =cpu_to_be32 (0x0002002d ), }, + { .addr =cpu_to_be32 (0x63fd901c ), .val =cpu_to_be32 (0x00008032 ), }, + { .addr =cpu_to_be32 (0x63fd901c ), .val =cpu_to_be32 (0x00008033 ), }, + { .addr =cpu_to_be32 (0x63fd901c ), .val =cpu_to_be32 (0x00028031 ), }, + { .addr =cpu_to_be32 (0x63fd901c ), .val =cpu_to_be32 (0x052080b0 ), }, + { .addr =cpu_to_be32 (0x63fd901c ), .val =cpu_to_be32 (0x04008040 ), }, + { .addr =cpu_to_be32 (0x63fd901c ), .val =cpu_to_be32 (0x0000803a ), }, + { .addr =cpu_to_be32 (0x63fd901c ), .val =cpu_to_be32 (0x0000803b ), }, + { .addr =cpu_to_be32 (0x63fd901c ), .val =cpu_to_be32 (0x00028039 ), }, + { .addr =cpu_to_be32 (0x63fd901c ), .val =cpu_to_be32 (0x05208138 ), }, + { .addr =cpu_to_be32 (0x63fd901c ), .val =cpu_to_be32 (0x04008048 ), }, + { .addr =cpu_to_be32 (0x63fd9020 ), .val =cpu_to_be32 (0x00005800 ), }, + { .addr =cpu_to_be32 (0x63fd9040 ), .val =cpu_to_be32 (0x04b80003 ), }, + { .addr =cpu_to_be32 (0x63fd9058 ), .val =cpu_to_be32 (0x00022227 ), }, + { .addr =cpu_to_be32 (0x63fd901c ), .val =cpu_to_be32 (0x00000000 ), }, +}; + +#define APP_DEST 0x70000000 + +struct imx_flash_header_v2 __flash_header_section flash_header = { + .header.tag =IVT_HEADER_TAG , + .header.length =cpu_to_be16 (32 ), + .header.version =IVT_VERSION , + + .entry =APP_DEST +0x1000 , + .dcd_ptr =APP_DEST +0x400 + offsetof(struct imx_flash_header_v2 , dcd), + .boot_data_ptr =APP_DEST +0x400 + offsetof(struct imx_flash_header_v2 , boot_data), + .self =APP_DEST +0x400 , + + .boot_data.start =APP_DEST , + .boot_data.size =DCD_BAREBOX_SIZE , + + .dcd.header.tag =DCD_HEADER_TAG , + .dcd.header.length =cpu_to_be16 (sizeof (struct imx_dcd ) +sizeof (dcd_entry)), + .dcd.header.version =DCD_VERSION , + + .dcd.command.tag =DCD_COMMAND_WRITE_TAG , + .dcd.command.length =cpu_to_be16 (sizeof (struct imx_dcd_command ) +sizeof (dcd_entry)), + .dcd.command.param =DCD_COMMAND_WRITE_PARAM , +};arch/arm/boards/freescale-mx53-voipac/lowlevel.c new file +9
-0@@ -0,0 +1,9 @@ +#include <common.h> +#include <mach/esdctl.h> +#include <asm/barebox-arm-head.h> + +void __naked barebox_arm_reset_vector (void ) +{ +arm_cpu_lowlevel_init (); +imx53_barebox_entry (0 ); +}Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Signature · 8 lines
-- Best regards, Antony Pavlov _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Re: [PATCH 2/4] i.mx53: voipac: Add board specific + flash header constructing code
Hello Antony;
OK -- I should probably add my name (even if I did not change almost anything).
Regards;
Rostislav
Quoted 12 lines · Antony Pavlov
Review
Quoted 1 line
(quoted diff) +0
-0
b/arch/arm/boards/freescale-mx53-voipac/flash_header.carch/arm/boards/freescale-mx53-voipac/flash_header.c line 2
Quoted 7 lines
new file mode 100644
index 0000000..c9ae06carch/arm/boards/freescale-mx53-voipac/flash_header.c new file +2
-0@@ -0,0 +1,102 @@ +/* +* Copyright (C) 2011 Marc Kleine-Budde <[email protected]> This file is rather like
freescale-mx53-smd/flash_header.c, but please change copyright header.
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
PATCH 3/4 i.mx53: voipac: Add barebox environment configuration file
In reply to Rostislav Lisovy---
create mode 100644 arch/arm/boards/freescale-mx53-voipac/env/config
arch/arm/boards/freescale-mx53-voipac/env/config new file +46 -0
@@ -0,0 +1,46 @@ +#!/bin/sh + +global.hostname=imx53-voipac +eth0.serverip= +user= + +# use 'dhcp' to do dhcp in barebox and in kernel +# use 'none' if you want to skip kernel ip autoconfiguration +ip=dhcp + +# or set your networking parameters here +#eth0.ipaddr=a.b.c.d +#eth0.netmask=a.b.c.d +#eth0.gateway=a.b.c.d +#eth0.serverip=a.b.c.d + +# can be either 'nfs', 'tftp', 'nor' or 'nand' +kernel_loc=tftp +# can be either 'net', 'nor', 'nand' or 'initrd' +rootfs_loc=net + +# can be either 'jffs2' or 'ubifs' +rootfs_type=ubifs +rootfsimage=root-${global.hostname}.$rootfs_type + +kernelimage=zImage-${global.hostname} +#kernelimage=uImage-${global.hostname} +#kernelimage=Image-${global.hostname} +#kernelimage=Image-${global.hostname}.lzo + +if [ -n $user ]; then + kernelimage="$user"-"$kernelimage" + nfsroot="$eth0.serverip:/home/$user/nfsroot/${global.hostname}" + rootfsimage="$user"-"$rootfsimage" +else + nfsroot="$eth0.serverip:/path/to/nfs/root" +fi + +autoboot_timeout=3 + +bootargs="console=ttymxc0,115200" + +disk_parts="256k(barebox)ro,128k(bareboxenv),4M(kernel),-(root)" + +# set a fancy prompt (if support is compiled in) +PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH 4/4 i.mx53: voipac: Modify Make- and config-files to enable building of mx53-voipac
In reply to Rostislav Lisovyarch/arm/boards/Makefile +1 -0
@@ -35,6 +35,7 @@ obj-$(CONFIG_MACH_FREESCALE_MX35_3STACK) += freescale-mx35-3-stack/ obj-$(CONFIG_MACH_FREESCALE_MX51_PDK) += freescale-mx51-pdk/ obj-$(CONFIG_MACH_FREESCALE_MX53_LOCO) += freescale-mx53-loco/ obj-$(CONFIG_MACH_FREESCALE_MX53_SMD) += freescale-mx53-smd/ +obj-$(CONFIG_MACH_FREESCALE_MX53_VOIPAC) += freescale-mx53-voipac/ obj-$(CONFIG_MACH_GE863) += telit-evk-pro3/ obj-$(CONFIG_MACH_GK802) += gk802/ obj-$(CONFIG_MACH_GLOBALSCALE_GURUPLUG) += globalscale-guruplug/
arch/arm/mach-imx/Kconfig +10 -0
@@ -20,6 +20,7 @@ config ARCH_TEXT_BASE default 0x97f00000 if MACH_FREESCALE_MX51_PDK default 0x7ff00000 if MACH_FREESCALE_MX53_LOCO default 0x7ff00000 if MACH_FREESCALE_MX53_SMD + default 0x7ff00000 if MACH_FREESCALE_MX53_VOIPAC default 0x87f00000 if MACH_GUF_CUPID default 0x93d00000 if MACH_TX25 default 0x7ff00000 if MACH_TQMA53
@@ -52,6 +53,7 @@ config BOARDINFO default "Synertronixx scb9328" if MACH_SCB9328 default "Garz+Fricke Neso" if MACH_NESO default "Freescale i.MX53 SMD" if MACH_FREESCALE_MX53_SMD + default "Voipac i.MX53" if MACH_FREESCALE_MX53_VOIPAC default "Efika MX smartbook" if MACH_EFIKA_MX_SMARTBOOK default "Garz+Fricke Cupid" if MACH_GUF_CUPID default "Ka-Ro tx25" if MACH_TX25
@@ -452,6 +454,14 @@ config MACH_FREESCALE_MX53_SMD bool "Freescale i.MX53 SMD" select ARCH_IMX53 +config MACH_FREESCALE_MX53_VOIPAC + bool "Voipac i.MX53" + select ARCH_IMX53 + select HAVE_DEFAULT_ENVIRONMENT_NEW + help + Say Y here if you are using the Voipac Technologies X53-DMM-668 + module equipped with a Freescale i.MX53 Processor + config MACH_TQMA53 bool "TQ i.MX53 TQMa53" select ARCH_IMX53
Signature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Quoted 9 lines · Rostislav Lisovy
This patchset adds support for Voipac X53-DMM-668 module equipped with i.mx53 CPU. More info about the module may be found at:
http://www.voipac.com/#X53-DMM-668The board specific code enables UART0, NAND flash, Ethernet. The
flash_header.ccontaining DCD configuration data is almost the same (except for one line) as the one in freescale-mx53-smd.
squash the 4 patch in one please
Quoted 7 lines
Rostislav Lisovy (4):
i.mx53: voipac: Change machine type identifier
i.mx53: voipac: Add board specific + flash header constructing code i.mx53: voipac: Add barebox environment configuration file i.mx53: voipac: Modify Make- and config-files to enable building ofmx53-voipac
Quoted 23 lines
arch/arm/boards/Makefile | 1 + arch/arm/boards/freescale-mx53-voipac/Makefile | 3 + arch/arm/boards/freescale-mx53-voipac/board.c | 168 ++++++++++++++++++++ arch/arm/boards/freescale-mx53-voipac/env/config | 46 ++++++ .../boards/freescale-mx53-voipac/flash_header.c | 102 ++++++++++++ arch/arm/boards/freescale-mx53-voipac/lowlevel.c | 9 ++ arch/arm/mach-imx/Kconfig | 10 ++ arch/arm/tools/mach-types | 2 +- 8 files changed, 340 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boards/freescale-mx53-voipac/Makefile create mode 100644 arch/arm/boards/freescale-mx53-voipac/board.c create mode 100644 arch/arm/boards/freescale-mx53-voipac/env/config create mode 100644 arch/arm/boards/freescale-mx53-voipac/flash_header.c create mode 100644 arch/arm/boards/freescale-mx53-voipac/lowlevel.cSignature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Quoted 5 lines · Jean-Christophe PLAGNIOL-VILLARD
Quoted 4 lines · Rostislav Lisovy
This patchset adds support for Voipac X53-DMM-668 module equipped with i.mx53 CPU. More info about the module may be found at:
http://www.voipac.com/#X53-DMM-668
Quoted 7 lines
Quoted 5 lines
The board specific code enables UART0, NAND flash, Ethernet. The
flash_header.ccontaining DCD configuration data is almost the same (except for one line) as the one in freescale-mx53-smd.squash the 4 patch in one please
I mean the 3 board adding patch into one
Quoted 32 lines
Quoted 8 lines
Rostislav Lisovy (4):
i.mx53: voipac: Change machine type identifier
i.mx53: voipac: Add board specific + flash header constructing code i.mx53: voipac: Add barebox environment configuration file i.mx53: voipac: Modify Make- and config-files to enable building ofmx53-voipacQuoted 23 lines
arch/arm/boards/Makefile | 1 + arch/arm/boards/freescale-mx53-voipac/Makefile | 3 + arch/arm/boards/freescale-mx53-voipac/board.c | 168 ++++++++++++++++++++ arch/arm/boards/freescale-mx53-voipac/env/config | 46 ++++++ .../boards/freescale-mx53-voipac/flash_header.c | 102 ++++++++++++ arch/arm/boards/freescale-mx53-voipac/lowlevel.c | 9 ++ arch/arm/mach-imx/Kconfig | 10 ++ arch/arm/tools/mach-types | 2 +- 8 files changed, 340 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boards/freescale-mx53-voipac/Makefile create mode 100644 arch/arm/boards/freescale-mx53-voipac/board.c create mode 100644 arch/arm/boards/freescale-mx53-voipac/env/config create mode 100644 arch/arm/boards/freescale-mx53-voipac/flash_header.c create mode 100644 arch/arm/boards/freescale-mx53-voipac/lowlevel.cSignature · 7 lines
1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Quoted 4 lines
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox