ARM: bcm: Add DEBUG_LL console support
PATCH v3 1/1 ARM: bcm: Add DEBUG_LL console support
This patch adds low level debug uart support to Broadcom
mobile based SOCs.
Changes from V2:
- Changed to follow hex ordering on entries
- Dropped defconfig changes
Changes from V1:
- Switched to use the common 8250 debug introduced in 3.12-rc1
arch/arm/Kconfig.debug +15 -1
@@ -94,6 +94,17 @@ choice depends on ARCH_BCM2835 select DEBUG_UART_PL01X + config DEBUG_BCM_KONA_UART + bool "Kernel low-level debugging messages via BCM KONA UART" + depends on ARCH_BCM + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Broadcom SoC platforms. + This low level debug works for Broadcom + mobile SoCs in the Kona family of chips (e.g. bcm28155, + bcm11351, etc...) + config DEBUG_CLPS711X_UART1 bool "Kernel low-level debugging messages via UART1" depends on ARCH_CLPS711X
@@ -951,6 +962,7 @@ config DEBUG_UART_PHYS default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 default 0x20201000 if DEBUG_BCM2835 + default 0x3e000000 if DEBUG_BCM_KONA_UART default 0x40090000 if ARCH_LPC32XX default 0x40100000 if DEBUG_PXA_UART1 default 0x42000000 if ARCH_GEMINI
@@ -1010,6 +1022,7 @@ config DEBUG_UART_VIRT default 0xfe018000 if DEBUG_MMP_UART3 default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART default 0xfe230000 if DEBUG_PICOXCELL_UART + default 0xfe300000 if DEBUG_BCM_KONA_UART default 0xfe800000 if ARCH_IOP32X default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HI3716_UART default 0xfeb24000 if DEBUG_RK3X_UART0
@@ -1052,7 +1065,8 @@ config DEBUG_UART_8250_WORD default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \ ARCH_KEYSTONE || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ - DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_DAVINCI_TNETV107X_UART1 + DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_DAVINCI_TNETV107X_UART1 || \ + DEBUG_BCM_KONA_UART config DEBUG_UART_8250_FLOW_CONTROL bool "Enable flow control for 8250 UART"
Signature · 1 line
1.7.10.4
Quoted 12 lines · Christian Daudt
This patch adds low level debug uart support to Broadcom
mobile based SOCs.Signed-off-by Christian Daudt <[email protected]>Changes from V2:
- Changed to follow hex ordering on entries
- Dropped defconfig changesChanges from V1:
- Switched to use the common 8250 debug introduced in 3.12-rc1
Hi Russell,
Does V3 look ok ?
Thanks,
csd
Quoted 14 lines · Christian Daudt
Quoted 12 lines · Christian Daudt
This patch adds low level debug uart support to Broadcom
mobile based SOCs.Signed-off-by Christian Daudt <[email protected]>Changes from V2:
- Changed to follow hex ordering on entries
- Dropped defconfig changesChanges from V1:
- Switched to use the common 8250 debug introduced in 3.12-rc1
Quoted 5 lines
Hi Russell,
Does V3 look ok ?Thanks,
csd
Hi,
Can anyone provide an ack on this mod ?
Thanks,
csd
Markus Mayer
Tested-byQuoted 18 lines · Christian Daudt
Quoted 17 lines · Christian Daudt
Quoted 12 lines · Christian Daudt
This patch adds low level debug uart support to Broadcom
mobile based SOCs.Signed-off-by Christian Daudt <[email protected]>Changes from V2:
- Changed to follow hex ordering on entries
- Dropped defconfig changesChanges from V1:
- Switched to use the common 8250 debug introduced in 3.12-rc1Hi Russell,
Does V3 look ok ?
Quoted 7 lines
Quoted 2 lines
Thanks,
csdHi,
Can anyone provide an ack on this mod ?Thanks,
csd
[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.12.0+ (mmayer at lbrmn-lnxub70.ric.broadcom.com) [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: BCM281xx Broadcom Application Processor, model: BCM28155 AP board [ 0.000000] bootconsole [earlycon0] enabled [ 0.000000] Truncating RAM at 90000000-bfffffff to -bf7fffff (vmalloc region overlap). [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 193040 [ 0.000000] Kernel command line: console=ttyS0,115200n8 root=/dev/mmcblk0p8 rootwait rootfstype=ext4 earlyprintk [...] [ 0.200000] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.210000] 3e000000.uart: ttyS0 at MMIO 0x3e000000 (irq = 99, base_baud = 812500) is a 16550A [ 0.220000] console [ttyS0] enabled, bootconsole disabled [ 0.220000] console [ttyS0] enabled, bootconsole disabled [ 0.230000] mousedev: PS/2 mouse device common for all mice
[...]
Signature · 2 lines
Markus Mayer Broadcom Landing Team
Quoted 4 lines · Christian Daudt
This patch adds low level debug uart support to Broadcom
mobile based SOCs.Signed-off-by Christian Daudt <[email protected]>
Please send to Russell's patch tracker.
-Olof
Quoted 12 lines · Christian Daudt
This patch adds low level debug uart support to Broadcom
mobile based SOCs.Signed-off-by Christian Daudt <[email protected]>Changes from V2:
- Changed to follow hex ordering on entries
- Dropped defconfig changesChanges from V1:
- Switched to use the common 8250 debug introduced in 3.12-rc1
Also working for me on my Capri board.
-Matt