bugs fix for hpet
v6 cover bugs fix for hpet
v6:
move the setting of intcap to board, and keep the init value as zero. (thanks for the discussion from Paolo and Michael) introduce an extra hpet property "compat" to tell PC version
v5:
use stand compat property to fix hpet intcap on pc-q35, while on pc-piix, hard code intcap as IRQ2
v4:
use stand compat property to fix hpet intcap
v3:
change hpet interrupt capablity on board's demand
Liu Ping Fan (5):
hpet: inverse polarity when pin above ISA_NUM_IRQS
hpet: enable to entitle more irq pins for hpet
PC: use qdev_xx to create hpet instead of sysbus_create_xx
PC: add hpet compat to trace compatability version
PC: differentiate hpet's interrupt capability on piix and q35
hw/i386/pc.c | 24 +++++++++++++++++++++--- hw/i386/pc_piix.c | 7 ++++++- hw/i386/pc_q35.c | 2 +- hw/timer/hpet.c | 24 ++++++++++++++++++++---- include/hw/i386/pc.h | 11 ++++++++++- 5 files changed, 58 insertions(+), 10 deletions(-)
Signature · 1 line
1.8.1.4
PATCH v6 1/5 hpet: inverse polarity when pin above ISA_NUM_IRQS
According to hpet spec, hpet irq is high active. But according to ICH spec, there is inversion before the input of ioapic. So the OS will expect low active on this IRQ line. (On bare metal, if OS driver claims high active on this line, spurious irq is generated)
We fold the emulation of this inversion inside the hpet logic.
--- hw/timer/hpet.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)
hw/timer/hpet.c +12 -2
@@ -198,13 +198,23 @@ static void update_irq(struct HPETTimer *timer, int set)if (!set || !timer_enabled (timer) || !hpet_enabled (timer->state)) { s->isr &= ~mask;if (!timer_fsb_route (timer)) { -qemu_irq_lower (s->irqs[route]); +/* fold the ICH PIRQ# pin's internal inversion logic into hpet */ +if (route >=ISA_NUM_IRQS ) { +qemu_irq_raise (s->irqs[route]); + }else { +qemu_irq_lower (s->irqs[route]); + } } }else if (timer_fsb_route (timer)) {stl_le_phys (timer->fsb >>32 , timer->fsb &0xffffffff ); }else if (timer->config &HPET_TN_TYPE_LEVEL ) { s->isr |= mask; -qemu_irq_raise (s->irqs[route]); +/* fold the ICH PIRQ# pin's internal inversion logic into hpet */ +if (route >=ISA_NUM_IRQS ) { +qemu_irq_lower (s->irqs[route]); + }else { +qemu_irq_raise (s->irqs[route]); + } }else { s->isr &= ~mask;qemu_irq_pulse (s->irqs[route]);
Signature · 1 line
1.8.1.4
PATCH v6 2/5 hpet: enable to entitle more irq pins for hpet
In reply to Liu Ping FanOn q35, IRQ2/8 can be reserved for hpet timer 0/1. And pin 16~23 of ioapic can be dynamically assigned to hpet as guest chooses. So we introduce intcap property to do that. (currently, its value is IRQ2. Later, it should be set by board.)
--- hw/timer/hpet.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
hw/timer/hpet.c +8 -2
@@ -25,6 +25,7 @@*/ #include "hw/hw.h" +#include "hw/boards.h" #include "hw/i386/pc.h" #include "ui/console.h" #include "qemu/timer.h"
@@ -42,6 +43,9 @@#define HPET_MSI_SUPPORT 0 +/* Will fix: intcap is set by board, and should be 0 if nobody sets. */ +#define HPET_TN_INT_CAP_DEFAULT 0x4ULL +#define TYPE_HPET "hpet"#define HPET (obj) OBJECT_CHECK(HPETState, (obj), TYPE_HPET)
@@ -73,6 +77,7 @@ typedef struct HPETState {uint8_t rtc_irq_level;qemu_irq pit_enabled;uint8_t num_timers; +uint32_t intcap;HPETTimer timer[HPET_MAX_TIMERS ];/* Memory-mapped, software visible registers */
@@ -663,8 +668,8 @@ static void hpet_reset(DeviceState *d)if (s->flags & (1 <<HPET_MSI_SUPPORT )) { timer->config |=HPET_TN_FSB_CAP ; } -/* advertise availability of ioapic inti2 */ - timer->config |=0x00000004ULL <<32 ; +/* advertise availability of ioapic int */ + timer->config |= (uint64_t )s->intcap <<32 ; timer->period =0ULL ; timer->wrap_flag =0 ; }
@@ -753,6 +758,7 @@ static void hpet_realize(DeviceState *dev, Error **errp)static Property hpet_device_properties[] = {DEFINE_PROP_UINT8 ("timers" , HPETState, num_timers,HPET_MIN_TIMERS ),DEFINE_PROP_BIT ("msi" , HPETState, flags,HPET_MSI_SUPPORT , false), +DEFINE_PROP_UINT32 ("intcap" , HPETState, intcap,HPET_TN_INT_CAP_DEFAULT ),DEFINE_PROP_END_OF_LIST (), };
Signature · 1 line
1.8.1.4
Re: [Qemu-devel] [PATCH v6 2/5] hpet: enable to entitle more irq pins for hpet
Il 10/10/2013 09:56, Liu Ping Fan ha scritto:
Quoted 53 lines
On q35, IRQ2/8 can be reserved for hpet timer 0/1. And pin 16~23 of ioapic can be dynamically assigned to hpet as guest chooses. So we introduce intcap property to do that. (currently, its value is IRQ2. Later, it should be set by board.)
Signed-off-by Liu Ping Fan <[email protected]>--- hw/timer/hpet.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)hw/timer/hpet.c +7
-2@@ -25,6 +25,7 @@*/ #include "hw/hw.h" +#include "hw/boards.h" #include "hw/i386/pc.h" #include "ui/console.h" #include "qemu/timer.h" @@ -42,6 +43,9 @@#define HPET_MSI_SUPPORT 0 +/* Will fix: intcap is set by board, and should be 0 if nobody sets. */ +#define HPET_TN_INT_CAP_DEFAULT 0x4ULL +#define TYPE_HPET "hpet"#define HPET (obj) OBJECT_CHECK(HPETState, (obj), TYPE_HPET)@@ -73,6 +77,7 @@ typedef struct HPETState {uint8_t rtc_irq_level;qemu_irq pit_enabled;uint8_t num_timers; +uint32_t intcap;HPETTimer timer[HPET_MAX_TIMERS ];/* Memory-mapped, software visible registers */ @@ -663,8 +668,8 @@ static void hpet_reset(DeviceState *d)if (s->flags & (1 <<HPET_MSI_SUPPORT )) { timer->config |=HPET_TN_FSB_CAP ; } -/* advertise availability of ioapic inti2 */ - timer->config |=0x00000004ULL <<32 ; +/* advertise availability of ioapic int */ + timer->config |= (uint64_t )s->intcap <<32 ; timer->period =0ULL ; timer->wrap_flag =0 ; }
hw/timer/hpet.c static void hpet_realize(DeviceState *dev, Error **errp) · line 764
Quoted 7 lines
hw/timer/hpet.c +1
-0@@ -753,6 +758,7 @@ static void hpet_realize(DeviceState *dev, Error **errp)static Property hpet_device_properties[] = {DEFINE_PROP_UINT8 ("timers" , HPETState, num_timers,HPET_MIN_TIMERS ),DEFINE_PROP_BIT ("msi" , HPETState, flags,HPET_MSI_SUPPORT , false), +DEFINE_PROP_UINT32 ("intcap" , HPETState, intcap,HPET_TN_INT_CAP_DEFAULT ),DEFINE_PROP_END_OF_LIST (), };
According to Michael's request, a zero intcap should be detected in hpet_realize and give an error.
Paolo
Re: [Qemu-devel] [PATCH v6 2/5] hpet: enable to entitle more irq pins for hpet
Quoted 56 lines · Paolo Bonzini
Il 10/10/2013 09:56, Liu Ping Fan ha scritto:
Quoted 55 lines
On q35, IRQ2/8 can be reserved for hpet timer 0/1. And pin 16~23 of ioapic can be dynamically assigned to hpet as guest chooses. So we introduce intcap property to do that. (currently, its value is IRQ2. Later, it should be set by board.)
Signed-off-by Liu Ping Fan <[email protected]>--- hw/timer/hpet.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)hw/timer/hpet.c +7
-2@@ -25,6 +25,7 @@*/ #include "hw/hw.h" +#include "hw/boards.h" #include "hw/i386/pc.h" #include "ui/console.h" #include "qemu/timer.h" @@ -42,6 +43,9 @@#define HPET_MSI_SUPPORT 0 +/* Will fix: intcap is set by board, and should be 0 if nobody sets. */ +#define HPET_TN_INT_CAP_DEFAULT 0x4ULL +#define TYPE_HPET "hpet"#define HPET (obj) OBJECT_CHECK(HPETState, (obj), TYPE_HPET)@@ -73,6 +77,7 @@ typedef struct HPETState {uint8_t rtc_irq_level;qemu_irq pit_enabled;uint8_t num_timers; +uint32_t intcap;HPETTimer timer[HPET_MAX_TIMERS ];/* Memory-mapped, software visible registers */ @@ -663,8 +668,8 @@ static void hpet_reset(DeviceState *d)if (s->flags & (1 <<HPET_MSI_SUPPORT )) { timer->config |=HPET_TN_FSB_CAP ; } -/* advertise availability of ioapic inti2 */ - timer->config |=0x00000004ULL <<32 ; +/* advertise availability of ioapic int */ + timer->config |= (uint64_t )s->intcap <<32 ; timer->period =0ULL ; timer->wrap_flag =0 ; }@@ -753,6 +758,7 @@ static void hpet_realize(DeviceState *dev, Error **errp)static Property hpet_device_properties[] = {DEFINE_PROP_UINT8 ("timers" , HPETState, num_timers,HPET_MIN_TIMERS ),DEFINE_PROP_BIT ("msi" , HPETState, flags,HPET_MSI_SUPPORT , false),
Quoted 9 lines
hw/timer/hpet.c static void hpet_realize(DeviceState *dev, Error **errp) · line 764
Quoted 5 lines
hw/timer/hpet.c +1
-0+DEFINE_PROP_UINT32 ("intcap" , HPETState, intcap,HPET_TN_INT_CAP_DEFAULT ), DEFINE_PROP_END_OF_LIST(), };According to Michael's request, a zero intcap should be detected in
hpet_realizeand give an error.
Will fix.
Thanks and regards,
Ping Fan
Re: [Qemu-devel] [PATCH v6 2/5] hpet: enable to entitle more irq pins for hpet
In reply to Liu Ping FanQuoted 52 lines · Liu Ping Fan
On q35, IRQ2/8 can be reserved for hpet timer 0/1. And pin 16~23 of ioapic can be dynamically assigned to hpet as guest chooses. So we introduce intcap property to do that. (currently, its value is IRQ2. Later, it should be set by board.)
Signed-off-by Liu Ping Fan <[email protected]>--- hw/timer/hpet.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)hw/timer/hpet.c +7
-2@@ -25,6 +25,7 @@*/ #include "hw/hw.h" +#include "hw/boards.h" #include "hw/i386/pc.h" #include "ui/console.h" #include "qemu/timer.h" @@ -42,6 +43,9 @@#define HPET_MSI_SUPPORT 0 +/* Will fix: intcap is set by board, and should be 0 if nobody sets. */ +#define HPET_TN_INT_CAP_DEFAULT 0x4ULL +#define TYPE_HPET "hpet"#define HPET (obj) OBJECT_CHECK(HPETState, (obj), TYPE_HPET)@@ -73,6 +77,7 @@ typedef struct HPETState {uint8_t rtc_irq_level;qemu_irq pit_enabled;uint8_t num_timers; +uint32_t intcap;HPETTimer timer[HPET_MAX_TIMERS ];/* Memory-mapped, software visible registers */ @@ -663,8 +668,8 @@ static void hpet_reset(DeviceState *d)if (s->flags & (1 <<HPET_MSI_SUPPORT )) { timer->config |=HPET_TN_FSB_CAP ; } -/* advertise availability of ioapic inti2 */ - timer->config |=0x00000004ULL <<32 ; +/* advertise availability of ioapic int */ + timer->config |= (uint64_t )s->intcap <<32 ; timer->period =0ULL ; timer->wrap_flag =0 ; }
hw/timer/hpet.c static void hpet_realize(DeviceState *dev, Error **errp) · line 763
Quoted 6 lines
hw/timer/hpet.c +1
-0@@ -753,6 +758,7 @@ static void hpet_realize(DeviceState *dev, Error **errp)static Property hpet_device_properties[] = {DEFINE_PROP_UINT8 ("timers" , HPETState, num_timers,HPET_MIN_TIMERS ),DEFINE_PROP_BIT ("msi" , HPETState, flags,HPET_MSI_SUPPORT , false), +DEFINE_PROP_UINT32 ("intcap" , HPETState, intcap,HPET_TN_INT_CAP_DEFAULT ),DEFINE_PROP_END_OF_LIST (), };
Please add a macro for this name as you use it in other files later.
Quoted 3 lines
Signature · 2 lines
-- 1.8.1.4
Re: [Qemu-devel] [PATCH v6 2/5] hpet: enable to entitle more irq pins for hpet
Il 10/10/2013 11:16, Michael S. Tsirkin ha scritto:
Quoted 54 lines · Liu Ping Fan
Quoted 53 lines
On q35, IRQ2/8 can be reserved for hpet timer 0/1. And pin 16~23 of ioapic can be dynamically assigned to hpet as guest chooses. So we introduce intcap property to do that. (currently, its value is IRQ2. Later, it should be set by board.)
Signed-off-by Liu Ping Fan <[email protected]>--- hw/timer/hpet.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)hw/timer/hpet.c +7
-2@@ -25,6 +25,7 @@*/ #include "hw/hw.h" +#include "hw/boards.h" #include "hw/i386/pc.h" #include "ui/console.h" #include "qemu/timer.h" @@ -42,6 +43,9 @@#define HPET_MSI_SUPPORT 0 +/* Will fix: intcap is set by board, and should be 0 if nobody sets. */ +#define HPET_TN_INT_CAP_DEFAULT 0x4ULL +#define TYPE_HPET "hpet"#define HPET (obj) OBJECT_CHECK(HPETState, (obj), TYPE_HPET)@@ -73,6 +77,7 @@ typedef struct HPETState {uint8_t rtc_irq_level;qemu_irq pit_enabled;uint8_t num_timers; +uint32_t intcap;HPETTimer timer[HPET_MAX_TIMERS ];/* Memory-mapped, software visible registers */ @@ -663,8 +668,8 @@ static void hpet_reset(DeviceState *d)if (s->flags & (1 <<HPET_MSI_SUPPORT )) { timer->config |=HPET_TN_FSB_CAP ; } -/* advertise availability of ioapic inti2 */ - timer->config |=0x00000004ULL <<32 ; +/* advertise availability of ioapic int */ + timer->config |= (uint64_t )s->intcap <<32 ; timer->period =0ULL ; timer->wrap_flag =0 ; }@@ -753,6 +758,7 @@ static void hpet_realize(DeviceState *dev, Error **errp)static Property hpet_device_properties[] = {
Quoted 8 lines
hw/timer/hpet.c static void hpet_realize(DeviceState *dev, Error **errp) · line 763
Quoted 5 lines
hw/timer/hpet.c +1
-0DEFINE_PROP_UINT8 ("timers" , HPETState, num_timers,HPET_MIN_TIMERS ),DEFINE_PROP_BIT ("msi" , HPETState, flags,HPET_MSI_SUPPORT , false), +DEFINE_PROP_UINT32 ("intcap" , HPETState, intcap,HPET_TN_INT_CAP_DEFAULT ), DEFINE_PROP_END_OF_LIST(), };Please add a macro for this name as you use it in other files later.
Are you sure? This is not done for any other compat property.
Paolo
Re: [Qemu-devel] [PATCH v6 2/5] hpet: enable to entitle more irq pins for hpet
Quoted 64 lines · Paolo Bonzini
Il 10/10/2013 11:16, Michael S. Tsirkin ha scritto:
Quoted 54 lines · Liu Ping Fan
Quoted 53 lines
On q35, IRQ2/8 can be reserved for hpet timer 0/1. And pin 16~23 of ioapic can be dynamically assigned to hpet as guest chooses. So we introduce intcap property to do that. (currently, its value is IRQ2. Later, it should be set by board.)
Signed-off-by Liu Ping Fan <[email protected]>--- hw/timer/hpet.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)hw/timer/hpet.c +7
-2@@ -25,6 +25,7 @@*/ #include "hw/hw.h" +#include "hw/boards.h" #include "hw/i386/pc.h" #include "ui/console.h" #include "qemu/timer.h" @@ -42,6 +43,9 @@#define HPET_MSI_SUPPORT 0 +/* Will fix: intcap is set by board, and should be 0 if nobody sets. */ +#define HPET_TN_INT_CAP_DEFAULT 0x4ULL +#define TYPE_HPET "hpet"#define HPET (obj) OBJECT_CHECK(HPETState, (obj), TYPE_HPET)@@ -73,6 +77,7 @@ typedef struct HPETState {uint8_t rtc_irq_level;qemu_irq pit_enabled;uint8_t num_timers; +uint32_t intcap;HPETTimer timer[HPET_MAX_TIMERS ];/* Memory-mapped, software visible registers */ @@ -663,8 +668,8 @@ static void hpet_reset(DeviceState *d)if (s->flags & (1 <<HPET_MSI_SUPPORT )) { timer->config |=HPET_TN_FSB_CAP ; } -/* advertise availability of ioapic inti2 */ - timer->config |=0x00000004ULL <<32 ; +/* advertise availability of ioapic int */ + timer->config |= (uint64_t )s->intcap <<32 ; timer->period =0ULL ; timer->wrap_flag =0 ; }@@ -753,6 +758,7 @@ static void hpet_realize(DeviceState *dev, Error **errp)static Property hpet_device_properties[] = {Quoted 8 lines
hw/timer/hpet.c static void hpet_realize(DeviceState *dev, Error **errp) · line 763
Quoted 5 lines
hw/timer/hpet.c +1
-0DEFINE_PROP_UINT8 ("timers" , HPETState, num_timers,HPET_MIN_TIMERS ),DEFINE_PROP_BIT ("msi" , HPETState, flags,HPET_MSI_SUPPORT , false), +DEFINE_PROP_UINT32 ("intcap" , HPETState, intcap,HPET_TN_INT_CAP_DEFAULT ), DEFINE_PROP_END_OF_LIST(), };Please add a macro for this name as you use it in other files later.
Quoted 3 lines
Are you sure? This is not done for any other compat property.
Paolo
It's done if we use the property from C.
See PCI_HOST_PROP_PCI_HOLE64_SIZE.
You want compiler to catch errors, that's
much better than a runtime failure.
Signature · 1 line
MST
Re: [Qemu-devel] [PATCH v6 2/5] hpet: enable to entitle more irq pins for hpet
Il 10/10/2013 11:41, Michael S. Tsirkin ha scritto:
Quoted 8 lines
Quoted 3 lines
Quoted 3 lines
Are you sure? This is not done for any other compat property.
Paolo
It's done if we use the property from C.
SeePCI_HOST_PROP_PCI_HOLE64_SIZE.You want compiler to catch errors, that's
much better than a runtime failure.
I agree, but I think there should be no need to use the property from C.
Paolo
Re: [Qemu-devel] [PATCH v6 2/5] hpet: enable to entitle more irq pins for hpet
Quoted 7 lines · Paolo Bonzini
Il 10/10/2013 11:41, Michael S. Tsirkin ha scritto:
Quoted 6 lines
Quoted 3 lines
Quoted 3 lines
Are you sure? This is not done for any other compat property.
Paolo
It's done if we use the property from C.
SeePCI_HOST_PROP_PCI_HOLE64_SIZE.
Quoted 6 lines
Quoted 2 lines
You want compiler to catch errors, that's
much better than a runtime failure.I agree, but I think there should be no need to use the property from C.
Paolo
Well this patchset does use it from C.
If it's done it needs a macro.
Re: [Qemu-devel] [PATCH v6 2/5] hpet: enable to entitle more irq pins for hpet
Quoted 11 lines · Michael S. Tsirkin
Quoted 10 lines · Paolo Bonzini
Il 10/10/2013 11:41, Michael S. Tsirkin ha scritto:
Quoted 8 lines
Quoted 3 lines
Quoted 3 lines
Are you sure? This is not done for any other compat property.
Paolo
It's done if we use the property from C.
SeePCI_HOST_PROP_PCI_HOLE64_SIZE.You want compiler to catch errors, that's
much better than a runtime failure.
Quoted 6 lines
Quoted 3 lines
I agree, but I think there should be no need to use the property from C.
Paolo
Well this patchset does use it from C.
If it's done it needs a macro.
hpet.h is the ideal place to put the macro, so pc.c can see it. But what about PC_COMPAT_1_7 in pc.h? I think it is not right to include hpet.h. So can I do not use marco in pc.h?
Thanks and regards,
Ping Fan
Re: [Qemu-devel] [PATCH v6 2/5] hpet: enable to entitle more irq pins for hpet
Il 11/10/2013 04:59, liu ping fan ha scritto:
Quoted 14 lines · Michael S. Tsirkin
Quoted 13 lines · Paolo Bonzini
Quoted 12 lines
Il 10/10/2013 11:41, Michael S. Tsirkin ha scritto:
Quoted 8 lines
Quoted 3 lines
Quoted 3 lines
Are you sure? This is not done for any other compat property.
Paolo
It's done if we use the property from C.
SeePCI_HOST_PROP_PCI_HOLE64_SIZE.You want compiler to catch errors, that's
much better than a runtime failure.I agree, but I think there should be no need to use the property from C.
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
Paolo
Well this patchset does use it from C.
If it's done it needs a macro.
hpet.his the ideal place to put the macro, sopc.ccan see it. But what aboutPC_COMPAT_1_7inpc.h? I think it is not right to includehpet.h. So can I do not use marco inpc.h?
I think you shouldn't need the macro (no need to use the property from C, only from compat properties).
Paolo
Re: [Qemu-devel] [PATCH v6 2/5] hpet: enable to entitle more irq pins for hpet
Quoted 20 lines · Paolo Bonzini
Il 11/10/2013 04:59, liu ping fan ha scritto:
Quoted 19 lines · Michael S. Tsirkin
Quoted 17 lines · Paolo Bonzini
Quoted 7 lines
Il 10/10/2013 11:41, Michael S. Tsirkin ha scritto:
Quoted 6 lines
Quoted 3 lines
Quoted 3 lines
Are you sure? This is not done for any other compat property.
Paolo
It's done if we use the property from C.
SeePCI_HOST_PROP_PCI_HOLE64_SIZE.Quoted 6 lines
Quoted 2 lines
You want compiler to catch errors, that's
much better than a runtime failure.I agree, but I think there should be no need to use the property from C.
Paolo
Well this patchset does use it from C.
If it's done it needs a macro.
Quoted 7 lines
Quoted 3 lines
hpet.his the ideal place to put the macro, sopc.ccan see it. But what aboutPC_COMPAT_1_7inpc.h? I think it is not right to includehpet.h. So can I do not use marco inpc.h?I think you shouldn't need the macro (no need to use the property from C, only from compat properties).
We need to tell the compat and then decide to set "intcap" in pc_basic_device_init()
uint8_t compat = object_property_get_int(OBJECT(hpet),
"intcap", NULL);
if (!compat) {
qdev_prop_set_uint32(hpet, "intcap", 0xff0104);
}Regards,
Ping Fan
Re: [Qemu-devel] [PATCH v6 2/5] hpet: enable to entitle more irq pins for hpet
Il 11/10/2013 11:18, liu ping fan ha scritto:
Quoted 28 lines · Paolo Bonzini
Quoted 20 lines
Il 11/10/2013 04:59, liu ping fan ha scritto:
Quoted 19 lines · Michael S. Tsirkin
Quoted 17 lines · Paolo Bonzini
Quoted 7 lines
Il 10/10/2013 11:41, Michael S. Tsirkin ha scritto:
Quoted 6 lines
Quoted 3 lines
Quoted 3 lines
Are you sure? This is not done for any other compat property.
Paolo
It's done if we use the property from C.
SeePCI_HOST_PROP_PCI_HOLE64_SIZE.Quoted 6 lines
Quoted 2 lines
You want compiler to catch errors, that's
much better than a runtime failure.I agree, but I think there should be no need to use the property from C.
Paolo
Well this patchset does use it from C.
If it's done it needs a macro.Quoted 7 lines
Quoted 3 lines
hpet.his the ideal place to put the macro, sopc.ccan see it. But what aboutPC_COMPAT_1_7inpc.h? I think it is not right to includehpet.h. So can I do not use marco inpc.h?I think you shouldn't need the macro (no need to use the property from C, only from compat properties).
Quoted 8 lines
We need to tell the compat and then decide to set "intcap" in
pc_basic_device_init()uint8_t compat = object_property_get_int(OBJECT(hpet), "intcap", NULL); if (!compat) { qdev_prop_set_uint32(hpet, "intcap", 0xff0104); }
No, that can be done via global properties as well.
Paolo
Re: [Qemu-devel] [PATCH v6 2/5] hpet: enable to entitle more irq pins for hpet
In reply to liu ping fanQuoted 31 lines · liu ping fan
Quoted 20 lines · Paolo Bonzini
Il 11/10/2013 04:59, liu ping fan ha scritto:
Quoted 19 lines · Michael S. Tsirkin
Quoted 17 lines · Paolo Bonzini
Quoted 7 lines
Il 10/10/2013 11:41, Michael S. Tsirkin ha scritto:
Quoted 6 lines
Quoted 3 lines
Quoted 3 lines
Are you sure? This is not done for any other compat property.
Paolo
It's done if we use the property from C.
SeePCI_HOST_PROP_PCI_HOLE64_SIZE.Quoted 6 lines
Quoted 2 lines
You want compiler to catch errors, that's
much better than a runtime failure.I agree, but I think there should be no need to use the property from C.
Paolo
Well this patchset does use it from C.
If it's done it needs a macro.Quoted 7 lines
Quoted 3 lines
hpet.his the ideal place to put the macro, sopc.ccan see it. But what aboutPC_COMPAT_1_7inpc.h? I think it is not right to includehpet.h. So can I do not use marco inpc.h?I think you shouldn't need the macro (no need to use the property from C, only from compat properties).
We need to tell the compat and then decide to set "intcap" in
pc_basic_device_init()
Quoted 8 lines
uint8_t compat = object_property_get_int(OBJECT(hpet), "intcap", NULL); if (!compat) { qdev_prop_set_uint32(hpet, "intcap", 0xff0104); }Regards,
Ping Fan
So if you use it from C, please use a macro.
If not, no need to.
Re: [Qemu-devel] [PATCH v6 2/5] hpet: enable to entitle more irq pins for hpet
In reply to liu ping fanQuoted 14 lines · liu ping fan
Quoted 13 lines · Michael S. Tsirkin
Quoted 12 lines · Paolo Bonzini
Il 10/10/2013 11:41, Michael S. Tsirkin ha scritto:
Quoted 8 lines
Quoted 3 lines
Quoted 3 lines
Are you sure? This is not done for any other compat property.
Paolo
It's done if we use the property from C.
SeePCI_HOST_PROP_PCI_HOLE64_SIZE.You want compiler to catch errors, that's
much better than a runtime failure.I agree, but I think there should be no need to use the property from C.
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
Paolo
Well this patchset does use it from C.
If it's done it needs a macro.
hpet.his the ideal place to put the macro, sopc.ccan see it. But what aboutPC_COMPAT_1_7inpc.h? I think it is not right to includehpet.h.
Why not?
Quoted 4 lines
So can I do not use marco in
pc.h?Thanks and regards,
Ping Fan
Re: [Qemu-devel] [PATCH v6 2/5] hpet: enable to entitle more irq pins for hpet
Quoted 17 lines · Michael S. Tsirkin
Quoted 16 lines · liu ping fan
Quoted 15 lines · Michael S. Tsirkin
Quoted 13 lines · Paolo Bonzini
Il 10/10/2013 11:41, Michael S. Tsirkin ha scritto:
Quoted 8 lines
Quoted 3 lines
Quoted 3 lines
Are you sure? This is not done for any other compat property.
Paolo
It's done if we use the property from C.
SeePCI_HOST_PROP_PCI_HOLE64_SIZE.You want compiler to catch errors, that's
much better than a runtime failure.I agree, but I think there should be no need to use the property from C.
Paolo
Quoted 9 lines
Quoted 6 lines
Quoted 2 lines
Well this patchset does use it from C.
If it's done it needs a macro.
hpet.his the ideal place to put the macro, sopc.ccan see it. But what aboutPC_COMPAT_1_7inpc.h? I think it is not right to includehpet.h.Why not?
Since pc.h is included by so many hpet unrelated drivers, if pc.h include hpet.h, then we will export the internal of hpet struct.
Regards,
Ping Fan
PATCH v6 3/5 PC: use qdev_xx to create hpet instead of sysbus_create_xx
In reply to Liu Ping Fansysbus_create_xx func does not allow us to set a device's extra properties. While hpet need to set its compat property before initialization, so we abandon the wrapper function, and spread its logic "inline"
--- hw/i386/pc.c | 11 +++++++++-- hw/timer/hpet.c | 4 +--- 2 files changed, 10 insertions(+), 5 deletions(-)
hw/i386/pc.c +9 -2
@@ -1246,9 +1246,16 @@ void pc_basic_device_init(ISABus *isa_bus, qemu_irq *gsi,* when the HPET wants to take over. Thus we have to disable the latter. */ if (!no_hpet && (!kvm_irqchip_in_kernel () ||kvm_has_pit_state2 ())) { - hpet =sysbus_try_create_simple ("hpet" ,HPET_BASE ,NULL ); - +/* In order to set property, here not using sysbus_try_create_simple */ + hpet =qdev_try_create (NULL ,"hpet" );if (hpet) { +/* tmp fix. For compat, hard code to IRQ2 until we have correct +* compat property and differentiate pc-iix with pc-q35 +*/ +qdev_prop_set_uint32 (hpet,"intcap" ,0x4 ); +qdev_init_nofail (hpet); +sysbus_mmio_map (SYS_BUS_DEVICE (hpet),0 ,HPET_BASE ); +for (i =0 ; i <GSI_NUM_PINS ; i++) {sysbus_connect_irq (SYS_BUS_DEVICE (hpet), i, gsi[i]); }
hw/timer/hpet.c +1 -3
@@ -43,8 +43,6 @@#define HPET_MSI_SUPPORT 0 -/* Will fix: intcap is set by board, and should be 0 if nobody sets. */ -#define HPET_TN_INT_CAP_DEFAULT 0x4ULL#define TYPE_HPET "hpet"#define HPET (obj) OBJECT_CHECK(HPETState, (obj), TYPE_HPET)
@@ -758,7 +756,7 @@ static void hpet_realize(DeviceState *dev, Error **errp)static Property hpet_device_properties[] = {DEFINE_PROP_UINT8 ("timers" , HPETState, num_timers,HPET_MIN_TIMERS ),DEFINE_PROP_BIT ("msi" , HPETState, flags,HPET_MSI_SUPPORT , false), -DEFINE_PROP_UINT32 ("intcap" , HPETState, intcap,HPET_TN_INT_CAP_DEFAULT ), +DEFINE_PROP_UINT32 ("intcap" , HPETState, intcap,0 ),DEFINE_PROP_END_OF_LIST (), };
Signature · 1 line
1.8.1.4
Re: [Qemu-devel] [PATCH v6 3/5] PC: use qdev_xx to create hpet instead of sysbus_create_xx
Il 10/10/2013 09:56, Liu Ping Fan ha scritto:
Quoted 49 lines
sysbus_create_xxfunc does not allow us to set a device's extra properties. While hpet need to set its compat property before initialization, so we abandon the wrapper function, and spread its logic "inline"Signed-off-by Liu Ping Fan <[email protected]>--- hw/i386/pc.c | 11 +++++++++-- hw/timer/hpet.c | 4 +--- 2 files changed, 10 insertions(+), 5 deletions(-)hw/i386/pc.c +9
-2@@ -1246,9 +1246,16 @@ void pc_basic_device_init(ISABus *isa_bus, qemu_irq *gsi,* when the HPET wants to take over. Thus we have to disable the latter. */ if (!no_hpet && (!kvm_irqchip_in_kernel () ||kvm_has_pit_state2 ())) { - hpet =sysbus_try_create_simple ("hpet" ,HPET_BASE ,NULL ); - +/* In order to set property, here not using sysbus_try_create_simple */ + hpet =qdev_try_create (NULL ,"hpet" );if (hpet) { +/* tmp fix. For compat, hard code to IRQ2 until we have correct +* compat property and differentiate pc-iix with pc-q35 +*/ +qdev_prop_set_uint32 (hpet,"intcap" ,0x4 ); +qdev_init_nofail (hpet); +sysbus_mmio_map (SYS_BUS_DEVICE (hpet),0 ,HPET_BASE ); +for (i =0 ; i <GSI_NUM_PINS ; i++) {sysbus_connect_irq (SYS_BUS_DEVICE (hpet), i, gsi[i]); }hw/timer/hpet.c +0
-2@@ -43,8 +43,6 @@#define HPET_MSI_SUPPORT 0 -/* Will fix: intcap is set by board, and should be 0 if nobody sets. */ -#define HPET_TN_INT_CAP_DEFAULT 0x4ULL#define TYPE_HPET "hpet"#define HPET (obj) OBJECT_CHECK(HPETState, (obj), TYPE_HPET)
hw/timer/hpet.c static void hpet_realize(DeviceState *dev, Error **errp) · line 762
Quoted 8 lines
hw/timer/hpet.c +1
-1@@ -758,7 +756,7 @@ static void hpet_realize(DeviceState *dev, Error **errp)static Property hpet_device_properties[] = {DEFINE_PROP_UINT8 ("timers" , HPETState, num_timers,HPET_MIN_TIMERS ),DEFINE_PROP_BIT ("msi" , HPETState, flags,HPET_MSI_SUPPORT , false), -DEFINE_PROP_UINT32 ("intcap" , HPETState, intcap,HPET_TN_INT_CAP_DEFAULT ), +DEFINE_PROP_UINT32 ("intcap" , HPETState, intcap,0 ),DEFINE_PROP_END_OF_LIST (), };
This should not be needed anymore, except for changing the intcap default to 0 (which would go in patch 5).
Paolo
Re: [Qemu-devel] [PATCH v6 3/5] PC: use qdev_xx to create hpet instead of sysbus_create_xx
In reply to Liu Ping FanQuoted 6 lines · Liu Ping Fan
sysbus_create_xxfunc does not allow us to set a device's extra properties. While hpet need to set its compat property before initialization, so we abandon the wrapper function, and spread its logic "inline"Signed-off-by Liu Ping Fan <[email protected]>
I would merge patches 3,4,5 together.
It's generally not a good idea to change same line of code in multiple patches in a patchset, makes review harder instead of easier.
Quoted 52 lines
--- hw/i386/pc.c | 11 +++++++++-- hw/timer/hpet.c | 4 +--- 2 files changed, 10 insertions(+), 5 deletions(-)hw/i386/pc.c +9
-2@@ -1246,9 +1246,16 @@ void pc_basic_device_init(ISABus *isa_bus, qemu_irq *gsi,* when the HPET wants to take over. Thus we have to disable the latter. */ if (!no_hpet && (!kvm_irqchip_in_kernel () ||kvm_has_pit_state2 ())) { - hpet =sysbus_try_create_simple ("hpet" ,HPET_BASE ,NULL ); - +/* In order to set property, here not using sysbus_try_create_simple */ + hpet =qdev_try_create (NULL ,"hpet" );if (hpet) { +/* tmp fix. For compat, hard code to IRQ2 until we have correct +* compat property and differentiate pc-iix with pc-q35 +*/ +qdev_prop_set_uint32 (hpet,"intcap" ,0x4 ); +qdev_init_nofail (hpet); +sysbus_mmio_map (SYS_BUS_DEVICE (hpet),0 ,HPET_BASE ); +for (i =0 ; i <GSI_NUM_PINS ; i++) {sysbus_connect_irq (SYS_BUS_DEVICE (hpet), i, gsi[i]); }hw/timer/hpet.c +1
-3@@ -43,8 +43,6 @@#define HPET_MSI_SUPPORT 0 -/* Will fix: intcap is set by board, and should be 0 if nobody sets. */ -#define HPET_TN_INT_CAP_DEFAULT 0x4ULL#define TYPE_HPET "hpet"#define HPET (obj) OBJECT_CHECK(HPETState, (obj), TYPE_HPET)@@ -758,7 +756,7 @@ static void hpet_realize(DeviceState *dev, Error **errp)static Property hpet_device_properties[] = {DEFINE_PROP_UINT8 ("timers" , HPETState, num_timers,HPET_MIN_TIMERS ),DEFINE_PROP_BIT ("msi" , HPETState, flags,HPET_MSI_SUPPORT , false), -DEFINE_PROP_UINT32 ("intcap" , HPETState, intcap,HPET_TN_INT_CAP_DEFAULT ), +DEFINE_PROP_UINT32 ("intcap" , HPETState, intcap,0 ),DEFINE_PROP_END_OF_LIST (), };Signature · 1 line
1.8.1.4
PATCH v6 4/5 PC: add hpet compat to trace compatability version
In reply to Liu Ping FanFor guest bug compat, we need to limit hpet's intcap on IRQ2 for pc-q35-1.7 and earlier. We use hpet's compat property to indicate the PC version.
hw/i386/pc_piix.c +4 -0
@@ -346,6 +346,10 @@ static QEMUMachine pc_i440fx_machine_v1_7 = { .alias = "pc", .init = pc_init_pci, .is_default = 1, + .compat_props = (GlobalProperty []) { +PC_COMPAT_1_7 , + {/* end of list */ } + }, };#define PC_I440FX_1_6_MACHINE_OPTIONS PC_I440FX_MACHINE_OPTIONS
hw/i386/pc_q35.c +4 -0
@@ -270,6 +270,10 @@ static QEMUMachine pc_q35_machine_v1_7 = { .name = "pc-q35-1.7", .alias = "q35", .init = pc_q35_init, + .compat_props = (GlobalProperty []) { +PC_COMPAT_1_7 , + {/* end of list */ } + }, };#define PC_Q35_1_6_MACHINE_OPTIONS PC_Q35_MACHINE_OPTIONS
hw/timer/hpet.c +2 -0
@@ -76,6 +76,7 @@ typedef struct HPETState {qemu_irq pit_enabled;uint8_t num_timers;uint32_t intcap; +uint8_t compat;HPETTimer timer[HPET_MAX_TIMERS ];/* Memory-mapped, software visible registers */
@@ -757,6 +758,7 @@ static Property hpet_device_properties[] = {DEFINE_PROP_UINT8 ("timers" , HPETState, num_timers,HPET_MIN_TIMERS ),DEFINE_PROP_BIT ("msi" , HPETState, flags,HPET_MSI_SUPPORT , false),DEFINE_PROP_UINT32 ("intcap" , HPETState, intcap,0 ), +DEFINE_PROP_UINT8 ("compat" , HPETState, compat,0 ), DEFINE_PROP_END_OF_LIST(), };
include/hw/i386/pc.h +8 -0
@@ -225,7 +225,15 @@ void pvpanic_init(ISABus *bus);int e820_add_entry (uint64_t ,uint64_t ,uint32_t ); +#define PC_COMPAT_1_7 \ + {\ + .driver = "hpet",\ + .property = "compat",\ + .value = stringify(1),\ + } +#define PC_COMPAT_1_6 \ + PC_COMPAT_1_7, \ {\ .driver = "e1000",\ .property = "mitigation",\
Re: [Qemu-devel] [PATCH v6 4/5] PC: add hpet compat to trace compatability version
Il 10/10/2013 09:56, Liu Ping Fan ha scritto:
Quoted 67 lines
For guest bug compat, we need to limit hpet's intcap on IRQ2 for pc-q35-1.7 and earlier. We use hpet's compat property to indicate the PC version.
Signed-off-by Liu Ping Fan <[email protected]>hw/i386/pc_piix.c +4
-0@@ -346,6 +346,10 @@ static QEMUMachine pc_i440fx_machine_v1_7 = { .alias = "pc", .init = pc_init_pci, .is_default = 1, + .compat_props = (GlobalProperty []) { +PC_COMPAT_1_7 , + {/* end of list */ } + }, };#define PC_I440FX_1_6_MACHINE_OPTIONS PC_I440FX_MACHINE_OPTIONShw/i386/pc_q35.c +4
-0@@ -270,6 +270,10 @@ static QEMUMachine pc_q35_machine_v1_7 = { .name = "pc-q35-1.7", .alias = "q35", .init = pc_q35_init, + .compat_props = (GlobalProperty []) { +PC_COMPAT_1_7 , + {/* end of list */ } + }, };#define PC_Q35_1_6_MACHINE_OPTIONS PC_Q35_MACHINE_OPTIONShw/timer/hpet.c +2
-0@@ -76,6 +76,7 @@ typedef struct HPETState {qemu_irq pit_enabled;uint8_t num_timers;uint32_t intcap; +uint8_t compat;HPETTimer timer[HPET_MAX_TIMERS ];/* Memory-mapped, software visible registers */ @@ -757,6 +758,7 @@ static Property hpet_device_properties[] = {DEFINE_PROP_UINT8 ("timers" , HPETState, num_timers,HPET_MIN_TIMERS ),DEFINE_PROP_BIT ("msi" , HPETState, flags,HPET_MSI_SUPPORT , false),DEFINE_PROP_UINT32 ("intcap" , HPETState, intcap,0 ), +DEFINE_PROP_UINT8 ("compat" , HPETState, compat,0 ), DEFINE_PROP_END_OF_LIST(), };include/hw/i386/pc.h +2
-0@@ -225,7 +225,15 @@ void pvpanic_init(ISABus *bus);int e820_add_entry (uint64_t ,uint64_t ,uint32_t ); +#define PC_COMPAT_1_7 \ + {\
include/hw/i386/pc.h void pvpanic_init(ISABus *bus); · line 239
Quoted 10 lines
include/hw/i386/pc.h +6
-0+ .driver = "hpet",\ + .property = "compat",\ + .value = stringify(1),\ + } +#define PC_COMPAT_1_6 \ + PC_COMPAT_1_7, \ {\ .driver = "e1000",\ .property = "mitigation",\
You can set the intcap property directly instead of adding this indirection.
Paolo
PATCH v6 5/5 PC: differentiate hpet's interrupt capability on piix and q35
In reply to Liu Ping FanFor pc-piix-*, hpet's intcap is always hard coded as IRQ2. For q35, if it is pc-q35-1.7 and earlier, we use IRQ2 for compat reason, otherwise IRQ2, IRQ8, and IRQ16~23 are allowed.
--- hw/i386/pc.c | 21 ++++++++++++++++----- hw/i386/pc_piix.c | 3 ++- hw/i386/pc_q35.c | 2 +- include/hw/i386/pc.h | 3 ++- 4 files changed, 21 insertions(+), 8 deletions(-)
hw/i386/pc.c +16 -5
@@ -1219,7 +1219,8 @@ static const MemoryRegionOps ioportF0_io_ops = {void pc_basic_device_init (ISABus *isa_bus,qemu_irq *gsi,ISADevice **rtc_state,ISADevice **floppy, -bool no_vmport) +bool no_vmport, +bool hpet_irqs) {int i;DriveInfo *fd[MAX_FD ];
@@ -1249,10 +1250,20 @@ void pc_basic_device_init(ISABus *isa_bus, qemu_irq *gsi,/* In order to set property, here not using sysbus_try_create_simple */ hpet =qdev_try_create (NULL ,"hpet" );if (hpet) { -/* tmp fix. For compat, hard code to IRQ2 until we have correct -* compat property and differentiate pc-iix with pc-q35 -*/ -qdev_prop_set_uint32 (hpet,"intcap" ,0x4 ); +/* For pc-piix-*, hpet's intcap is always IRQ2. */ +if (!hpet_irqs) { +qdev_prop_set_uint32 (hpet,"intcap" ,0x4 ); + }else { +/* For pc-q35-1.7 and earlier, use IRQ2 for compat. */ +uint8_t compat =object_property_get_int (OBJECT (hpet), +"compat" ,NULL ); +if (compat) { +qdev_prop_set_uint32 (hpet,"intcap" ,0x4 ); + }else { +/* using IRQ16~23, IRQ8 and IRQ2 */ +qdev_prop_set_uint32 (hpet,"intcap" ,0xff0104 ); + } + }qdev_init_nofail (hpet);sysbus_mmio_map (SYS_BUS_DEVICE (hpet),0 ,HPET_BASE );
hw/i386/pc_piix.c +2 -1
@@ -180,7 +180,8 @@ static void pc_init1(QEMUMachineInitArgs *args,pc_vga_init (isa_bus, pci_enabled ? pci_bus :NULL );/* init basic PC hardware */ -pc_basic_device_init (isa_bus, gsi, &rtc_state, &floppy,xen_enabled ()); +pc_basic_device_init (isa_bus, gsi, &rtc_state, &floppy,xen_enabled (), + false);pc_nic_init (isa_bus, pci_bus);
hw/i386/pc_q35.c +1 -1
@@ -181,7 +181,7 @@ static void pc_q35_init(QEMUMachineInitArgs *args)pc_register_ferr_irq (gsi[13 ]);/* init basic PC hardware */ -pc_basic_device_init (isa_bus, gsi, &rtc_state, &floppy, false); +pc_basic_device_init (isa_bus, gsi, &rtc_state, &floppy, false, true);/* connect pm stuff to lpc */ ich9_lpc_pm_init (lpc);
include/hw/i386/pc.h +2 -1
@@ -134,7 +134,8 @@ DeviceState *pc_vga_init(ISABus *isa_bus, PCIBus *pci_bus);void pc_basic_device_init (ISABus *isa_bus,qemu_irq *gsi,ISADevice **rtc_state,ISADevice **floppy, -bool no_vmport); +bool no_vmport, +bool hpet_irqs);void pc_init_ne2k_isa (ISABus *bus,NICInfo *nd); void pc_cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size, const char *boot_device,
Signature · 1 line
1.8.1.4
Re: [Qemu-devel] [PATCH v6 5/5] PC: differentiate hpet's interrupt capability on piix and q35
Quoted 38 lines · Liu Ping Fan
For pc-piix-*, hpet's intcap is always hard coded as IRQ2. For q35, if it is pc-q35-1.7 and earlier, we use IRQ2 for compat reason, otherwise IRQ2, IRQ8, and IRQ16~23 are allowed.
Signed-off-by Liu Ping Fan <[email protected]>--- hw/i386/pc.c | 21 ++++++++++++++++----- hw/i386/pc_piix.c | 3 ++- hw/i386/pc_q35.c | 2 +- include/hw/i386/pc.h | 3 ++- 4 files changed, 21 insertions(+), 8 deletions(-)hw/i386/pc.c +6
-5@@ -1219,7 +1219,8 @@ static const MemoryRegionOps ioportF0_io_ops = {void pc_basic_device_init (ISABus *isa_bus,qemu_irq *gsi,ISADevice **rtc_state,ISADevice **floppy, -bool no_vmport) +bool no_vmport, +bool hpet_irqs) {int i;DriveInfo *fd[MAX_FD ];@@ -1249,10 +1250,20 @@ void pc_basic_device_init(ISABus *isa_bus, qemu_irq *gsi,/* In order to set property, here not using sysbus_try_create_simple */ hpet =qdev_try_create (NULL ,"hpet" );if (hpet) { -/* tmp fix. For compat, hard code to IRQ2 until we have correct -* compat property and differentiate pc-iix with pc-q35 -*/ -qdev_prop_set_uint32 (hpet,"intcap" ,0x4 ); +/* For pc-piix-*, hpet's intcap is always IRQ2. */ +if (!hpet_irqs) { +qdev_prop_set_uint32 (hpet,"intcap" ,0x4 ); + }else {
hw/i386/pc.c void pc_basic_device_init(ISABus *isa_bus, qemu_irq *gsi, · line 1266
Quoted 10 lines
hw/i386/pc.c +10
-0+/* For pc-q35-1.7 and earlier, use IRQ2 for compat. */ +uint8_t compat =object_property_get_int (OBJECT (hpet), +"compat" ,NULL ); +if (compat) { +qdev_prop_set_uint32 (hpet,"intcap" ,0x4 ); + }else { +/* using IRQ16~23, IRQ8 and IRQ2 */ +qdev_prop_set_uint32 (hpet,"intcap" ,0xff0104 ); + } + }
So why do we need an extra property?
uint8_t compat = object_property_get_int(OBJECT(hpet),
"intcap", NULL);
if (!intcap) {
/* For pc-piix-*, hpet's intcap is IRQ2. */
/* For Q35, using IRQ16~23, IRQ8 and IRQ2 */
uint32_t intcap = hpet_irqs ? 0xff0104 : 0x4;
qdev_prop_set_uint32(hpet, "intcap", intcap);
}now all you need to do for compat is set intcap property.
Quoted 46 lines
hw/i386/pc.c +0
-0qdev_init_nofail (hpet);sysbus_mmio_map (SYS_BUS_DEVICE (hpet),0 ,HPET_BASE );hw/i386/pc_piix.c +2
-1@@ -180,7 +180,8 @@ static void pc_init1(QEMUMachineInitArgs *args,pc_vga_init (isa_bus, pci_enabled ? pci_bus :NULL );/* init basic PC hardware */ -pc_basic_device_init (isa_bus, gsi, &rtc_state, &floppy,xen_enabled ()); +pc_basic_device_init (isa_bus, gsi, &rtc_state, &floppy,xen_enabled (), + false);pc_nic_init (isa_bus, pci_bus);hw/i386/pc_q35.c +1
-1@@ -181,7 +181,7 @@ static void pc_q35_init(QEMUMachineInitArgs *args)pc_register_ferr_irq (gsi[13 ]);/* init basic PC hardware */ -pc_basic_device_init (isa_bus, gsi, &rtc_state, &floppy, false); +pc_basic_device_init (isa_bus, gsi, &rtc_state, &floppy, false, true);/* connect pm stuff to lpc */ ich9_lpc_pm_init (lpc);include/hw/i386/pc.h +2
-1@@ -134,7 +134,8 @@ DeviceState *pc_vga_init(ISABus *isa_bus, PCIBus *pci_bus);void pc_basic_device_init (ISABus *isa_bus,qemu_irq *gsi,ISADevice **rtc_state,ISADevice **floppy, -bool no_vmport); +bool no_vmport, +bool hpet_irqs);void pc_init_ne2k_isa (ISABus *bus,NICInfo *nd); void pc_cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size, const char *boot_device,Signature · 1 line
1.8.1.4