Skip to contentSkip to conversation

openobex: use sourceforge repository

PATCH Superseded Arnaud Aujon 2 participants 3 messages Oct 24, 2013

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 openobex: use sourceforge repository

openobex releases are now available on sourceforge, add VERSION_MAJOR to be able to bump it more easily if necessary.

---
Changes v1 -> v2: just add patch comment

---
 package/openobex/openobex.mk | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)
package/openobex/openobex.mk +10 -2
index 7195a26..4f383c8 100644
@@ -4,8 +4,10 @@
 #
 ################################################################################
 
-OPENOBEX_VERSION = 1.5
-OPENOBEX_SITE = http://ftp.osuosl.org/pub/linux/bluetooth
+OPENOBEX_VERSION_MAJOR = 1.5
+OPENOBEX_VERSION = $(OPENOBEX_VERSION_MAJOR).0
+OPENOBEX_SOURCE = openobex-$(OPENOBEX_VERSION)-Source.zip
+OPENOBEX_SITE = http://downloads.sourceforge.net/project/openobex/openobex/$(OPENOBEX_VERSION_MAJOR)
 # Libraries seems to be released under LGPLv2.1+,
 # while other material is under GPLv2+.
 OPENOBEX_LICENSE = GPLv2+/LGPLv2.1+
@@ -15,6 +17,12 @@ OPENOBEX_DEPENDENCIES = host-pkgconf
 OPENOBEX_AUTORECONF = YES
 OPENOBEX_INSTALL_STAGING = YES
 
+define OPENOBEX_EXTRACT_CMDS
++       unzip -d $(@D) $(DL_DIR)/$(OPENOBEX_SOURCE)
++       mv $(@D)/openobex-$(OPENOBEX_VERSION)-Source/* $(@D)
++       $(RM) -r $(@D)/openobex-$(OPENOBEX_VERSION)-Source
+endef
+
 OPENOBEX_CONF_OPT += \
 	$(if $(BR2_ENABLE_DEBUG),--enable-debug) \
 	$(if $(BR2_PACKAGE_OPENOBEX_APPS),--enable-apps) \
Signature · 1 line
1.8.3.1
#1 lore raw

PATCH v2 1/1 openobex: use sourceforge repository

Quoted 2 lines · Arnaud Aujon

openobex releases are now available on sourceforge, add VERSION_MAJOR to be able to bump it more easily if necessary.

Why sourceforge? The source is hosted on gitorious, so it would be
better to grab a tarball there I'd think. There's a tag for 1.5 so you can get the tarball from
https://gitorious.org/openobex/mainline/archive/1.5.tar.gz

Regards,
Arnout

Quoted 39 lines

---
Changes v1 -> v2: just add patch comment

---
  package/openobex/openobex.mk | 12 ++++++++++--
  1 file changed, 10 insertions(+), 2 deletions(-)
package/openobex/openobex.mk +10 -2
index 7195a26..4f383c8 100644
@@ -4,8 +4,10 @@
  #
  ################################################################################
 
-OPENOBEX_VERSION = 1.5
-OPENOBEX_SITE = http://ftp.osuosl.org/pub/linux/bluetooth
+OPENOBEX_VERSION_MAJOR = 1.5
+OPENOBEX_VERSION = $(OPENOBEX_VERSION_MAJOR).0
+OPENOBEX_SOURCE = openobex-$(OPENOBEX_VERSION)-Source.zip
+OPENOBEX_SITE = http://downloads.sourceforge.net/project/openobex/openobex/$(OPENOBEX_VERSION_MAJOR)
  # Libraries seems to be released under LGPLv2.1+,
  # while other material is under GPLv2+.
  OPENOBEX_LICENSE = GPLv2+/LGPLv2.1+
@@ -15,6 +17,12 @@ OPENOBEX_DEPENDENCIES = host-pkgconf
  OPENOBEX_AUTORECONF = YES
  OPENOBEX_INSTALL_STAGING = YES
 
+define OPENOBEX_EXTRACT_CMDS
++       unzip -d $(@D) $(DL_DIR)/$(OPENOBEX_SOURCE)
++       mv $(@D)/openobex-$(OPENOBEX_VERSION)-Source/* $(@D)
++       $(RM) -r $(@D)/openobex-$(OPENOBEX_VERSION)-Source
+endef
+
  OPENOBEX_CONF_OPT += \
  	$(if $(BR2_ENABLE_DEBUG),--enable-debug) \
  	$(if $(BR2_PACKAGE_OPENOBEX_APPS),--enable-apps) \
Signature · 6 lines
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
#2 lore raw

PATCH v2 1/1 openobex: use sourceforge repository

I used sourceforge because on openobex gitorious wiki page, the release chapter refers to sourceforge.
But I guess, as the development is done using gitorious it's better using it.
I will update the patch to use gitorious.

Arnaud

2013/10/24 Arnout Vandecappelle <[email protected]>

Quoted 59 lines · Arnaud Aujon
Quoted 4 lines

openobex releases are now available on sourceforge, add VERSION_MAJOR to be able to bump it more easily if necessary.

Why sourceforge? The source is hosted on gitorious, so it would be better
to grab a tarball there I'd think. There's a tag for 1.5 so you can get the tarball from
https://gitorious.org/**openobex/mainline/archive/1.5.**tar.gz<https://gitorious.org/openobex/mainline/archive/1.5.tar.gz>

Regards,
Arnout

Quoted 31 lines

---
Changes v1 -> v2: just add patch comment

---
  package/openobex/openobex.mk | 12 ++++++++++--
  1 file changed, 10 insertions(+), 2 deletions(-)
package/openobex/openobex.mk +4 -2
index 7195a26..4f383c8 100644
@@ -4,8 +4,10 @@
  #
  ##############################**##############################**
 ####################
 
-OPENOBEX_VERSION = 1.5
-OPENOBEX_SITE = http://ftp.osuosl.org/pub/**linux/bluetooth<http://ftp.osuosl.org/pub/linux/bluetooth>
+OPENOBEX_VERSION_MAJOR = 1.5
+OPENOBEX_VERSION = $(OPENOBEX_VERSION_MAJOR).0
+OPENOBEX_SOURCE = openobex-$(OPENOBEX_VERSION)-**Source.zip
+OPENOBEX_SITE = http://downloads.sourceforge.**

net/project/openobex/openobex/**$(OPENOBEX_VERSION_MAJOR)<http://downloads.sourceforge.net/project/openobex/openobex/$(OPENOBEX_VERSION_MAJOR)>
# Libraries seems to be released under LGPLv2.1+,

  # while other material is under GPLv2+.
  OPENOBEX_LICENSE = GPLv2+/LGPLv2.1+
package/openobex/openobex.mk +0 -0
@@ -15,6 +17,12 @@ OPENOBEX_DEPENDENCIES = host-pkgconf
  OPENOBEX_AUTORECONF = YES
  OPENOBEX_INSTALL_STAGING = YES

package/openobex/openobex.mk OPENOBEX_DEPENDENCIES = host-pkgconf · line 28

Quoted 10 lines
package/openobex/openobex.mk +6 -0
 
+define OPENOBEX_EXTRACT_CMDS
++       unzip -d $(@D) $(DL_DIR)/$(OPENOBEX_SOURCE)
++       mv $(@D)/openobex-$(OPENOBEX_**VERSION)-Source/* $(@D)
++       $(RM) -r $(@D)/openobex-$(OPENOBEX_**VERSION)-Source
+endef
+
  OPENOBEX_CONF_OPT += \
        $(if $(BR2_ENABLE_DEBUG),--enable-**debug) \
        $(if $(BR2_PACKAGE_OPENOBEX_APPS),-**-enable-apps) \

--

Quoted 7 lines
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/**arnoutvandecappelle<http://www.linkedin.com/in/arnoutvandecappelle>
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20131024/e94d8dfd/attachment-0001.html>