openobex: use sourceforge repository
PATCH v2 1/1 openobex: use sourceforge repository
openobex releases are now available on sourceforge, add VERSION_MAJOR to be able to bump it more easily if necessary.
---
Changes v1 -> v2: just add patch comment
--- package/openobex/openobex.mk | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
package/openobex/openobex.mk +10 -2
@@ -4,8 +4,10 @@ # ################################################################################ -OPENOBEX_VERSION = 1.5 -OPENOBEX_SITE = http://ftp.osuosl.org/pub/linux/bluetooth +OPENOBEX_VERSION_MAJOR = 1.5 +OPENOBEX_VERSION = $(OPENOBEX_VERSION_MAJOR).0 +OPENOBEX_SOURCE = openobex-$(OPENOBEX_VERSION)-Source.zip +OPENOBEX_SITE = http://downloads.sourceforge.net/project/openobex/openobex/$(OPENOBEX_VERSION_MAJOR) # Libraries seems to be released under LGPLv2.1+, # while other material is under GPLv2+. OPENOBEX_LICENSE = GPLv2+/LGPLv2.1+
@@ -15,6 +17,12 @@ OPENOBEX_DEPENDENCIES = host-pkgconf OPENOBEX_AUTORECONF = YES OPENOBEX_INSTALL_STAGING = YES +define OPENOBEX_EXTRACT_CMDS ++ unzip -d $(@D) $(DL_DIR)/$(OPENOBEX_SOURCE) ++ mv $(@D)/openobex-$(OPENOBEX_VERSION)-Source/* $(@D) ++ $(RM) -r $(@D)/openobex-$(OPENOBEX_VERSION)-Source +endef + OPENOBEX_CONF_OPT += \ $(if $(BR2_ENABLE_DEBUG),--enable-debug) \ $(if $(BR2_PACKAGE_OPENOBEX_APPS),--enable-apps) \
Signature · 1 line
1.8.3.1
PATCH v2 1/1 openobex: use sourceforge repository
Quoted 2 lines · Arnaud Aujon
openobex releases are now available on sourceforge, add
VERSION_MAJORto be able to bump it more easily if necessary.
Why sourceforge? The source is hosted on gitorious, so it would be
better to grab a tarball there I'd think. There's a tag for 1.5 so you can get the tarball from
https://gitorious.org/openobex/mainline/archive/1.5.tar.gz
Regards,
Arnout
Quoted 39 lines
Signed-off-by Arnaud Aujon <[email protected]>---
Changes v1 -> v2: just add patch comment--- package/openobex/openobex.mk | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)package/openobex/openobex.mk +10
-2@@ -4,8 +4,10 @@ # ################################################################################ -OPENOBEX_VERSION = 1.5 -OPENOBEX_SITE = http://ftp.osuosl.org/pub/linux/bluetooth +OPENOBEX_VERSION_MAJOR = 1.5 +OPENOBEX_VERSION = $(OPENOBEX_VERSION_MAJOR).0 +OPENOBEX_SOURCE = openobex-$(OPENOBEX_VERSION)-Source.zip +OPENOBEX_SITE = http://downloads.sourceforge.net/project/openobex/openobex/$(OPENOBEX_VERSION_MAJOR) # Libraries seems to be released under LGPLv2.1+, # while other material is under GPLv2+. OPENOBEX_LICENSE = GPLv2+/LGPLv2.1+@@ -15,6 +17,12 @@ OPENOBEX_DEPENDENCIES = host-pkgconf OPENOBEX_AUTORECONF = YES OPENOBEX_INSTALL_STAGING = YES +define OPENOBEX_EXTRACT_CMDS ++ unzip -d $(@D) $(DL_DIR)/$(OPENOBEX_SOURCE) ++ mv $(@D)/openobex-$(OPENOBEX_VERSION)-Source/* $(@D) ++ $(RM) -r $(@D)/openobex-$(OPENOBEX_VERSION)-Source +endef + OPENOBEX_CONF_OPT += \ $(if $(BR2_ENABLE_DEBUG),--enable-debug) \ $(if $(BR2_PACKAGE_OPENOBEX_APPS),--enable-apps) \
Signature · 6 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
PATCH v2 1/1 openobex: use sourceforge repository
I used sourceforge because on openobex gitorious wiki page, the release chapter refers to sourceforge.
But I guess, as the development is done using gitorious it's better using it.
I will update the patch to use gitorious.
Arnaud
2013/10/24 Arnout Vandecappelle <[email protected]>
Quoted 59 lines · Arnaud Aujon
Quoted 4 lines
openobex releases are now available on sourceforge, add
VERSION_MAJORto be able to bump it more easily if necessary.Why sourceforge? The source is hosted on gitorious, so it would be better
to grab a tarball there I'd think. There's a tag for 1.5 so you can get the tarball from
https://gitorious.org/**openobex/mainline/archive/1.5.**tar.gz<https://gitorious.org/openobex/mainline/archive/1.5.tar.gz>Regards,
ArnoutQuoted 31 lines
Signed-off-by Arnaud Aujon <[email protected]>---
Changes v1 -> v2: just add patch comment--- package/openobex/openobex.mk | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)package/openobex/openobex.mk +4
-2@@ -4,8 +4,10 @@ # ##############################**##############################** #################### -OPENOBEX_VERSION = 1.5 -OPENOBEX_SITE = http://ftp.osuosl.org/pub/**linux/bluetooth<http://ftp.osuosl.org/pub/linux/bluetooth> +OPENOBEX_VERSION_MAJOR = 1.5 +OPENOBEX_VERSION = $(OPENOBEX_VERSION_MAJOR).0 +OPENOBEX_SOURCE = openobex-$(OPENOBEX_VERSION)-**Source.zip +OPENOBEX_SITE = http://downloads.sourceforge.**net/project/openobex/openobex/**$(OPENOBEX_VERSION_MAJOR)<http://downloads.sourceforge.net/project/openobex/openobex/$(OPENOBEX_VERSION_MAJOR)>
# Libraries seems to be released under LGPLv2.1+,# while other material is under GPLv2+. OPENOBEX_LICENSE = GPLv2+/LGPLv2.1+package/openobex/openobex.mk +0
-0@@ -15,6 +17,12 @@ OPENOBEX_DEPENDENCIES = host-pkgconf OPENOBEX_AUTORECONF = YES OPENOBEX_INSTALL_STAGING = YESpackage/openobex/openobex.mk OPENOBEX_DEPENDENCIES = host-pkgconf · line 28
Quoted 10 lines
package/openobex/openobex.mk +6
-0+define OPENOBEX_EXTRACT_CMDS ++ unzip -d $(@D) $(DL_DIR)/$(OPENOBEX_SOURCE) ++ mv $(@D)/openobex-$(OPENOBEX_**VERSION)-Source/* $(@D) ++ $(RM) -r $(@D)/openobex-$(OPENOBEX_**VERSION)-Source +endef + OPENOBEX_CONF_OPT += \ $(if $(BR2_ENABLE_DEBUG),--enable-**debug) \ $(if $(BR2_PACKAGE_OPENOBEX_APPS),-**-enable-apps) \--
Quoted 7 lines
Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/**arnoutvandecappelle<http://www.linkedin.com/in/arnoutvandecappelle> GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20131024/e94d8dfd/attachment-0001.html>