Skip to contentSkip to conversation

ARM: dts: Add initial support for cm-fx6.

PATCH New Valentin Raevsky 3 participants 3 messages Oct 29, 2013 – Nov 3, 2013

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: Add initial support for cm-fx6.

Add initial support for cm-fx6 module.

cm-fx6 is a module based on mx6q SoC with the following features:
- Up to 4GB of DDR3
- 1 LCD/DVI output port
- 1 HDMI output port
- 2 LVDS LCD ports
- Gigabit Ethernet
- Analog Audio
- CAN
- SATA
- NAND
- PCIE

This patch allows to boot up the module, configures the serial console, the Ethernet adapter and the heartbeat led.

cm-fx6 is embedded inside the Utilite computer.

---

Shawn, can this still be applied for 3.13 ?

 arch/arm/boot/dts/Makefile         |    1 +
 arch/arm/boot/dts/imx6q-cm-fx6.dts |   53 ++++++++++++++++++++++++++++++++++++
 2 files changed, 54 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6q-cm-fx6.dts
arch/arm/boot/dts/Makefile +1 -0
index 641b3c9..87ca7ca 100644
@@ -131,6 +131,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx6q-sabrelite.dtb \
 	imx6q-sabresd.dtb \
 	imx6q-sbc6x.dtb \
+	imx6q-cm-fx6.dtb \
 	imx6sl-evk.dtb \
 	vf610-twr.dtb
 dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
arch/arm/boot/dts/imx6q-cm-fx6.dts new file +53 -0

53 lines not on this page · raw message

Signature · 1 line
1.7.9.5
#1 lore raw

PATCH 1/1 ARM: dts: Add initial support for cm-fx6.

Quoted 17 lines · Valentin Raevsky

Add initial support for cm-fx6 module.

cm-fx6 is a module based on mx6q SoC with the following features:
- Up to 4GB of DDR3
- 1 LCD/DVI output port
- 1 HDMI output port
- 2 LVDS LCD ports
- Gigabit Ethernet
- Analog Audio
- CAN
- SATA
- NAND
- PCIE

This patch allows to boot up the module, configures the serial console, the Ethernet adapter and the heartbeat led.

Quoted 7 lines

cm-fx6 is embedded inside the Utilite computer.

---

Shawn, can this still be applied for 3.13 ?

Sorry, it's late for 3.13. Applied for 3.14 with a small fix-up below.

Quoted 11 lines
 arch/arm/boot/dts/Makefile         |    1 +
 arch/arm/boot/dts/imx6q-cm-fx6.dts |   53 ++++++++++++++++++++++++++++++++++++
 2 files changed, 54 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6q-cm-fx6.dts
arch/arm/boot/dts/Makefile +0 -0
index 641b3c9..87ca7ca 100644

arch/arm/boot/dts/Makefile dtb-$(CONFIG_ARCH_MXC) += \ · line 134

Quoted 4 lines
arch/arm/boot/dts/Makefile +1 -0
@@ -131,6 +131,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx6q-sabrelite.dtb \
 	imx6q-sabresd.dtb \
 	imx6q-sbc6x.dtb \
+	imx6q-cm-fx6.dtb \

If you look at the list, you can find that they are sorted alphabetically. I just moved it around to maintain the order.

Shawn

Quoted 3 lines
arch/arm/boot/dts/Makefile +0 -0
 	imx6sl-evk.dtb \
 	vf610-twr.dtb
 dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
#2 lore raw

PATCH 1/1 ARM: dts: Add initial support for cm-fx6.

Quoted 20 lines · Shawn Guo
Quoted 19 lines · Valentin Raevsky

Add initial support for cm-fx6 module.

cm-fx6 is a module based on mx6q SoC with the following features:
- Up to 4GB of DDR3
- 1 LCD/DVI output port
- 1 HDMI output port
- 2 LVDS LCD ports
- Gigabit Ethernet
- Analog Audio
- CAN
- SATA
- NAND
- PCIE

This patch allows to boot up the module, configures the serial console, the Ethernet adapter and the heartbeat led.

cm-fx6 is embedded inside the Utilite computer.

Quoted 7 lines
Quoted 5 lines

---

Shawn, can this still be applied for 3.13 ?

Sorry, it's late for 3.13. Applied for 3.14 with a small fix-up below.

Thanks!

Quoted 7 lines
Quoted 7 lines

 arch/arm/boot/dts/Makefile         |    1 +
 arch/arm/boot/dts/imx6q-cm-fx6.dts |   53 ++++++++++++++++++++++++++++++++++++
 2 files changed, 54 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6q-cm-fx6.dts
Quoted 12 lines

arch/arm/boot/dts/Makefile dtb-$(CONFIG_ARCH_MXC) += \ · line 134

Quoted 9 lines
arch/arm/boot/dts/Makefile +1 -0
index 641b3c9..87ca7ca 100644
@@ -131,6 +131,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx6q-sabrelite.dtb \
 	imx6q-sabresd.dtb \
 	imx6q-sbc6x.dtb \
+	imx6q-cm-fx6.dtb \

If you look at the list, you can find that they are sorted alphabetically. I just moved it around to maintain the order.

Sorry for that. Thanks for fixing this up!

Signature · 2 lines
Regards,
Igor.