ARM: dts: Add initial support for cm-fx6.
Subsystems (3)
PATCH 1/1 ARM: dts: Add initial support for cm-fx6.
Add initial support for cm-fx6 module.
cm-fx6 is a module based on mx6q SoC with the following features:
- Up to 4GB of DDR3
- 1 LCD/DVI output port
- 1 HDMI output port
- 2 LVDS LCD ports
- Gigabit Ethernet
- Analog Audio
- CAN
- SATA
- NAND
- PCIE
This patch allows to boot up the module, configures the serial console, the Ethernet adapter and the heartbeat led.
cm-fx6 is embedded inside the Utilite computer.
---
Shawn, can this still be applied for 3.13 ?
arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6q-cm-fx6.dts | 53 ++++++++++++++++++++++++++++++++++++ 2 files changed, 54 insertions(+) create mode 100644 arch/arm/boot/dts/imx6q-cm-fx6.dts
arch/arm/boot/dts/Makefile +1 -0
@@ -131,6 +131,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ imx6q-sbc6x.dtb \ + imx6q-cm-fx6.dtb \ imx6sl-evk.dtb \ vf610-twr.dtb dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
arch/arm/boot/dts/imx6q-cm-fx6.dts new file +53 -0
53 lines not on this page · raw message
Signature · 1 line
1.7.9.5
PATCH 1/1 ARM: dts: Add initial support for cm-fx6.
Quoted 17 lines · Valentin Raevsky
Add initial support for cm-fx6 module.
cm-fx6 is a module based on mx6q SoC with the following features:
- Up to 4GB of DDR3
- 1 LCD/DVI output port
- 1 HDMI output port
- 2 LVDS LCD ports
- Gigabit Ethernet
- Analog Audio
- CAN
- SATA
- NAND
- PCIEThis patch allows to boot up the module, configures the serial console, the Ethernet adapter and the heartbeat led.
Quoted 7 lines
cm-fx6 is embedded inside the Utilite computer.
Signed-off-by Valentin Raevsky <[email protected]>Signed-off-by Igor Grinberg <[email protected]>---
Shawn, can this still be applied for 3.13 ?
Sorry, it's late for 3.13. Applied for 3.14 with a small fix-up below.
Quoted 11 lines
arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6q-cm-fx6.dts | 53 ++++++++++++++++++++++++++++++++++++ 2 files changed, 54 insertions(+) create mode 100644 arch/arm/boot/dts/imx6q-cm-fx6.dtsarch/arm/boot/dts/Makefile +0
-0
arch/arm/boot/dts/Makefile dtb-$(CONFIG_ARCH_MXC) += \ · line 134
Quoted 4 lines
arch/arm/boot/dts/Makefile +1
-0@@ -131,6 +131,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ imx6q-sbc6x.dtb \ + imx6q-cm-fx6.dtb \
If you look at the list, you can find that they are sorted alphabetically. I just moved it around to maintain the order.
Shawn
Quoted 3 lines
arch/arm/boot/dts/Makefile +0
-0imx6sl-evk.dtb \ vf610-twr.dtb dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
PATCH 1/1 ARM: dts: Add initial support for cm-fx6.
Quoted 20 lines · Shawn Guo
Quoted 19 lines · Valentin Raevsky
Add initial support for cm-fx6 module.
cm-fx6 is a module based on mx6q SoC with the following features:
- Up to 4GB of DDR3
- 1 LCD/DVI output port
- 1 HDMI output port
- 2 LVDS LCD ports
- Gigabit Ethernet
- Analog Audio
- CAN
- SATA
- NAND
- PCIEThis patch allows to boot up the module, configures the serial console, the Ethernet adapter and the heartbeat led.
cm-fx6 is embedded inside the Utilite computer.
Quoted 7 lines
Quoted 5 lines
Signed-off-by Valentin Raevsky <[email protected]>Signed-off-by Igor Grinberg <[email protected]>---
Shawn, can this still be applied for 3.13 ?
Sorry, it's late for 3.13. Applied for 3.14 with a small fix-up below.
Thanks!
Quoted 7 lines
Quoted 7 lines
arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6q-cm-fx6.dts | 53 ++++++++++++++++++++++++++++++++++++ 2 files changed, 54 insertions(+) create mode 100644 arch/arm/boot/dts/imx6q-cm-fx6.dts
Quoted 12 lines
arch/arm/boot/dts/Makefile dtb-$(CONFIG_ARCH_MXC) += \ · line 134
Quoted 9 lines
arch/arm/boot/dts/Makefile +1
-0@@ -131,6 +131,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ imx6q-sbc6x.dtb \ + imx6q-cm-fx6.dtb \If you look at the list, you can find that they are sorted alphabetically. I just moved it around to maintain the order.
Sorry for that. Thanks for fixing this up!
Signature · 2 lines
Regards, Igor.