Skip to contentSkip to conversation

qtest: split configuration of qtest accelerator and chardev

PATCH In review Michael S. Tsirkin 2 participants 4 messages Nov 6, 2013

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/2 qtest: split configuration of qtest accelerator and chardev

From: Paolo Bonzini <[email protected]>

qtest uses the icount infrastructure to implement a test-driven vm_clock. This however is not necessary when using -qtest as a "probe" together with a normal TCG-, KVM- or Xen-based virtual machine. Hence, split out the call to configure_icount into a new function that is called only for "-machine accel=qtest"; and disable those commands when running with an accelerator other than qtest.

This also fixes an assertion failure with "qemu-system-x86_64 -machine accel=qtest" but no -qtest option. This is a valid case, albeit somewhat weird; nothing will happen in the VM but you'll still be able to interact with the monitor or the GUI.

Now that qtest_init is not limited to an int(void) function, change global variables that are not used outside qtest_init to arguments.

And finally, cleanup useless parts of include/sysemu/qtest.h. The file is not used at all for user-only emulation, and qtest is not available on Win32 due to its usage of sigwait.

---
 include/sysemu/qtest.h | 25 +++++--------------------
 qtest.c                | 20 ++++++++++----------
 vl.c                   |  8 +++++---
 3 files changed, 20 insertions(+), 33 deletions(-)
include/sysemu/qtest.h +5 -20
index 9a0c6b3..112a661 100644
@@ -16,38 +16,23 @@
 
 #include "qemu-common.h"
 
-#if !defined(CONFIG_USER_ONLY)
 extern bool qtest_allowed;
-extern const char *qtest_chrdev;
-extern const char *qtest_log;
 
 static inline bool qtest_enabled(void)
 {
     return qtest_allowed;
 }
 
+int qtest_init_accel(void);
+void qtest_init(const char *qtest_chrdev, const char *qtest_log);
+
 static inline int qtest_available(void)
 {
+#ifdef CONFIG_POSIX
     return 1;
-}
-
-int qtest_init(void);
 #else
-static inline bool qtest_enabled(void)
-{
-    return false;
-}
-
-static inline int qtest_available(void)
-{
-    return 0;
-}
-
-static inline int qtest_init(void)
-{
     return 0;
-}
-
 #endif
+}
 
 #endif
qtest.c +10 -10
index 584c707..dcf1301 100644
@@ -22,8 +22,6 @@
 
 #define MAX_IRQ 256
 
-const char *qtest_chrdev;
-const char *qtest_log;
 bool qtest_allowed;
 
 static DeviceState *irq_intercept_dev;
@@ -406,7 +404,7 @@ static void qtest_process_command(CharDriverState *chr, gchar **words)
 
         qtest_send_prefix(chr);
         qtest_send(chr, "OK\n");
-    } else if (strcmp(words[0], "clock_step") == 0) {
+    } else if (qtest_enabled() && strcmp(words[0], "clock_step") == 0) {
         int64_t ns;
 
         if (words[1]) {
@@ -417,7 +415,7 @@ static void qtest_process_command(CharDriverState *chr, gchar **words)
         qtest_clock_warp(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + ns);
         qtest_send_prefix(chr);
         qtest_send(chr, "OK %"PRIi64"\n", (int64_t)qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL));
-    } else if (strcmp(words[0], "clock_set") == 0) {
+    } else if (qtest_enabled() && strcmp(words[0], "clock_set") == 0) {
         int64_t ns;
 
         g_assert(words[1]);
@@ -502,13 +500,17 @@ static void qtest_event(void *opaque, int event)
     }
 }
 
-int qtest_init(void)
+int qtest_init_accel(void)
 {
-    CharDriverState *chr;
+    configure_icount("0");
 
-    g_assert(qtest_chrdev != NULL);
+    return 0;
+}
+
+void qtest_init(const char *qtest_chrdev, const char *qtest_log)
+{
+    CharDriverState *chr;
 
-    configure_icount("0");
     chr = qemu_chr_new("qtest", qtest_chrdev, NULL);
 
     qemu_chr_add_handlers(chr, qtest_can_read, qtest_read, qtest_event, chr);
@@ -525,6 +527,4 @@ int qtest_init(void)
     }
 
     qtest_chr = chr;
-
-    return 0;
 }
vl.c +5 -3
index bf03524..f28674f 100644
@@ -2622,7 +2622,7 @@ static struct {
     { "tcg", "tcg", tcg_available, tcg_init, &tcg_allowed },
     { "xen", "Xen", xen_available, xen_init, &xen_allowed },
     { "kvm", "KVM", kvm_available, kvm_init, &kvm_allowed },
-    { "qtest", "QTest", qtest_available, qtest_init, &qtest_allowed },
+    { "qtest", "QTest", qtest_available, qtest_init_accel, &qtest_allowed },
 };
 
 static int configure_accelerator(void)
@@ -2834,6 +2834,8 @@ int main(int argc, char **argv, char **envp)
     QEMUMachine *machine;
     const char *cpu_model;
     const char *vga_model = "none";
+    const char *qtest_chrdev = NULL;
+    const char *qtest_log = NULL;
     const char *pid_file = NULL;
     const char *incoming = NULL;
 #ifdef CONFIG_VNC
@@ -4039,8 +4041,8 @@ int main(int argc, char **argv, char **envp)
 
     configure_accelerator();
 
-    if (!qtest_enabled() && qtest_chrdev) {
-        qtest_init();
+    if (qtest_chrdev) {
+        qtest_init(qtest_chrdev, qtest_log);
     }
 
     machine_opts = qemu_get_machine_opts();
Signature · 1 line
MST
#1 lore raw

PATCH v2 2/2 acpi-test: basic acpi unit-test

We run bios, and boot a minimal boot sector that immediately halts. Then poke at memory to find ACPI tables.

This only checks that RSDP is there.
More will be added later.

Cc Andreas Färber <[email protected]>
Cc Markus Armbruster <[email protected]>
Cc Paolo Bonzini <[email protected]>

---

changes from v1:
address style comments by Markus, Andreas add cli to disable interrupts as suggested by Paolo

 tests/acpi-test.c | 135 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/Makefile    |   2 +
 2 files changed, 137 insertions(+)
 create mode 100644 tests/acpi-test.c
tests/acpi-test.c new file +135 -0
new file mode 100644
index 0000000..468c4f5
@@ -0,0 +1,135 @@
+/*
+ * Boot order test cases.
+ *
+ * Copyright (c) 2013 Red Hat Inc.
+ *
+ * Authors:
+ *  Michael S. Tsirkin <[email protected]>,
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include <string.h>
+#include <stdio.h>
+#include <glib.h>
+#include "libqtest.h"
+
+typedef struct {
+    const char *args;
+    uint64_t expected_boot;
+    uint64_t expected_reboot;
+} boot_order_test;
+
+#define LOW(x) ((x) & 0xff)
+#define HIGH(x) ((x) >> 8)
+
+#define SIGNATURE 0xdead
+#define SIGNATURE_OFFSET 0x10
+#define BOOT_SECTOR_ADDRESS 0x7c00
+
+/* Boot sector code: write SIGNATURE into memory,
+ * then halt.
+ */
+static uint8_t boot_sector[0x200] = {
+    /* 7c00: mov $0xdead,%ax */
+    [0x00] = 0xb8,
+    [0x01] = LOW(SIGNATURE),
+    [0x02] = HIGH(SIGNATURE),
+    /* 7c03:  mov %ax,0x7c10 */
+    [0x03] = 0xa3,
+    [0x04] = LOW(BOOT_SECTOR_ADDRESS + SIGNATURE_OFFSET),
+    [0x05] = HIGH(BOOT_SECTOR_ADDRESS + SIGNATURE_OFFSET),
+    /* 7c06: cli */
+    [0x06] = 0xfa,
+    /* 7c07: hlt */
+    [0x07] = 0xf4,
+    /* 7c08: jmp 0x7c07=0x7c0a-3 */
+    [0x08] = 0xeb,
+    [0x09] = LOW(-3),
+    /* We mov 0xdead here: set value to make debugging easier */
+    [SIGNATURE_OFFSET] = LOW(0xface),
+    [SIGNATURE_OFFSET + 1] = HIGH(0xface),
+    /* End of boot sector marker */
+    [0x1FE] = 0x55,
+    [0x1FF] = 0xAA,
+};
+
+static const char *disk = "tests/acpi-test-disk.raw";
+
+static void test_acpi_one(const char *params)
+{
+    char *args;
+    uint8_t signature_low;
+    uint8_t signature_high;
+    uint16_t signature;
+    int i;
+    uint32_t off;
+
+
+    args = g_strdup_printf("-net none -display none %s %s",
+                           params ? params : "", disk);
+    qtest_start(args);
+
+   /* Wait at most 1 minute */
+#define TEST_DELAY (1 * G_USEC_PER_SEC / 10)
+#define TEST_CYCLES MAX((60 * G_USEC_PER_SEC / TEST_DELAY), 1)
+
+    /* Poll until code has run and modified memory.  Once it has we know BIOS
+     * initialization is done.  TODO: check that IP reached the halt
+     * instruction.
+     */
+    for (i = 0; i < TEST_CYCLES; ++i) {
+        signature_low = readb(BOOT_SECTOR_ADDRESS + SIGNATURE_OFFSET);
+        signature_high = readb(BOOT_SECTOR_ADDRESS + SIGNATURE_OFFSET + 1);
+        signature = (signature_high << 8) | signature_low;
+        if (signature == SIGNATURE) {
+            break;
+        }
+        g_usleep(TEST_DELAY);
+    }
+    g_assert_cmphex(signature, ==, SIGNATURE);
+
+    /* OK, now find RSDP */
+    for (off = 0xf0000; off < 0x100000; off += 0x10)
+    {
+        uint8_t sig[] = "RSD PTR ";
+        int i;
+
+        for (i = 0; i < sizeof sig - 1; ++i) {
+            sig[i] = readb(off + i);
+        }
+
+        if (!memcmp(sig, "RSD PTR ", sizeof sig)) {
+            break;
+        }
+    }
+
+    g_assert_cmphex(off, <, 0x100000);
+
+    qtest_quit(global_qtest);
+    g_free(args);
+}
+
+static void test_acpi_tcg(void)
+{
+    /* Supplying -machine accel argument overrides the default (qtest).
+     * This is to make guest actually run.
+     */
+    test_acpi_one("-machine accel=tcg");
+}
+
+int main(int argc, char *argv[])
+{
+    const char *arch = qtest_get_arch();
+    FILE *f = fopen(disk, "w");
+    fwrite(boot_sector, 1, sizeof boot_sector, f);
+    fclose(f);
+
+    g_test_init(&argc, &argv, NULL);
+
+    if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) {
+        qtest_add_func("acpi/tcg", test_acpi_tcg);
+    }
+    return g_test_run();
+}
tests/Makefile +2 -0
index fa4c9f0..62a0a5d 100644
@@ -64,6 +64,7 @@ check-qtest-i386-y += tests/ide-test$(EXESUF)
 check-qtest-i386-y += tests/hd-geo-test$(EXESUF)
 gcov-files-i386-y += hw/hd-geometry.c
 check-qtest-i386-y += tests/boot-order-test$(EXESUF)
+check-qtest-i386-y += tests/acpi-test$(EXESUF)
 check-qtest-i386-y += tests/rtc-test$(EXESUF)
 check-qtest-i386-y += tests/i440fx-test$(EXESUF)
 check-qtest-i386-y += tests/fw_cfg-test$(EXESUF)
@@ -171,6 +172,7 @@ tests/fdc-test$(EXESUF): tests/fdc-test.o
 tests/ide-test$(EXESUF): tests/ide-test.o $(libqos-pc-obj-y)
 tests/hd-geo-test$(EXESUF): tests/hd-geo-test.o
 tests/boot-order-test$(EXESUF): tests/boot-order-test.o $(libqos-obj-y)
+tests/acpi-test$(EXESUF): tests/acpi-test.o $(libqos-obj-y)
 tests/tmp105-test$(EXESUF): tests/tmp105-test.o $(libqos-omap-obj-y)
 tests/i440fx-test$(EXESUF): tests/i440fx-test.o $(libqos-pc-obj-y)
 tests/fw_cfg-test$(EXESUF): tests/fw_cfg-test.o $(libqos-pc-obj-y)
Signature · 1 line
MST
#2 lore raw

Re: [Qemu-devel] [PATCH v2 2/2] acpi-test: basic acpi unit-test

Am 06.11.2013 15:53, schrieb Michael S. Tsirkin:

Quoted 149 lines

We run bios, and boot a minimal boot sector that immediately halts. Then poke at memory to find ACPI tables.

This only checks that RSDP is there.
More will be added later.

Cc Andreas Färber <[email protected]>
Cc Markus Armbruster <[email protected]>
Cc Paolo Bonzini <[email protected]>

---

changes from v1:
address style comments by Markus, Andreas add cli to disable interrupts as suggested by Paolo

 tests/acpi-test.c | 135 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/Makefile    |   2 +
 2 files changed, 137 insertions(+)
 create mode 100644 tests/acpi-test.c
tests/acpi-test.c new file +122 -0
new file mode 100644
index 0000000..468c4f5
@@ -0,0 +1,135 @@
+/*
+ * Boot order test cases.
+ *
+ * Copyright (c) 2013 Red Hat Inc.
+ *
+ * Authors:
+ *  Michael S. Tsirkin <[email protected]>,
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include <string.h>
+#include <stdio.h>
+#include <glib.h>
+#include "libqtest.h"
+
+typedef struct {
+    const char *args;
+    uint64_t expected_boot;
+    uint64_t expected_reboot;
+} boot_order_test;
+
+#define LOW(x) ((x) & 0xff)
+#define HIGH(x) ((x) >> 8)
+
+#define SIGNATURE 0xdead
+#define SIGNATURE_OFFSET 0x10
+#define BOOT_SECTOR_ADDRESS 0x7c00
+
+/* Boot sector code: write SIGNATURE into memory,
+ * then halt.
+ */
+static uint8_t boot_sector[0x200] = {
+    /* 7c00: mov $0xdead,%ax */
+    [0x00] = 0xb8,
+    [0x01] = LOW(SIGNATURE),
+    [0x02] = HIGH(SIGNATURE),
+    /* 7c03:  mov %ax,0x7c10 */
+    [0x03] = 0xa3,
+    [0x04] = LOW(BOOT_SECTOR_ADDRESS + SIGNATURE_OFFSET),
+    [0x05] = HIGH(BOOT_SECTOR_ADDRESS + SIGNATURE_OFFSET),
+    /* 7c06: cli */
+    [0x06] = 0xfa,
+    /* 7c07: hlt */
+    [0x07] = 0xf4,
+    /* 7c08: jmp 0x7c07=0x7c0a-3 */
+    [0x08] = 0xeb,
+    [0x09] = LOW(-3),
+    /* We mov 0xdead here: set value to make debugging easier */
+    [SIGNATURE_OFFSET] = LOW(0xface),
+    [SIGNATURE_OFFSET + 1] = HIGH(0xface),
+    /* End of boot sector marker */
+    [0x1FE] = 0x55,
+    [0x1FF] = 0xAA,
+};
+
+static const char *disk = "tests/acpi-test-disk.raw";
+
+static void test_acpi_one(const char *params)
+{
+    char *args;
+    uint8_t signature_low;
+    uint8_t signature_high;
+    uint16_t signature;
+    int i;
+    uint32_t off;
+
+
+    args = g_strdup_printf("-net none -display none %s %s",
+                           params ? params : "", disk);
+    qtest_start(args);
+
+   /* Wait at most 1 minute */
+#define TEST_DELAY (1 * G_USEC_PER_SEC / 10)
+#define TEST_CYCLES MAX((60 * G_USEC_PER_SEC / TEST_DELAY), 1)
+
+    /* Poll until code has run and modified memory.  Once it has we know BIOS
+     * initialization is done.  TODO: check that IP reached the halt
+     * instruction.
+     */
+    for (i = 0; i < TEST_CYCLES; ++i) {
+        signature_low = readb(BOOT_SECTOR_ADDRESS + SIGNATURE_OFFSET);
+        signature_high = readb(BOOT_SECTOR_ADDRESS + SIGNATURE_OFFSET + 1);
+        signature = (signature_high << 8) | signature_low;
+        if (signature == SIGNATURE) {
+            break;
+        }
+        g_usleep(TEST_DELAY);
+    }
+    g_assert_cmphex(signature, ==, SIGNATURE);
+
+    /* OK, now find RSDP */
+    for (off = 0xf0000; off < 0x100000; off += 0x10)
+    {
+        uint8_t sig[] = "RSD PTR ";
+        int i;
+
+        for (i = 0; i < sizeof sig - 1; ++i) {
+            sig[i] = readb(off + i);
+        }
+
+        if (!memcmp(sig, "RSD PTR ", sizeof sig)) {
+            break;
+        }
+    }
+
+    g_assert_cmphex(off, <, 0x100000);
+
+    qtest_quit(global_qtest);
+    g_free(args);
+}
+
+static void test_acpi_tcg(void)
+{
+    /* Supplying -machine accel argument overrides the default (qtest).
+     * This is to make guest actually run.
+     */
+    test_acpi_one("-machine accel=tcg");
+}
+
+int main(int argc, char *argv[])

tests/acpi-test.c line 132

Quoted 10 lines
tests/acpi-test.c new file +10 -0
+{
+    const char *arch = qtest_get_arch();
+    FILE *f = fopen(disk, "w");
+    fwrite(boot_sector, 1, sizeof boot_sector, f);
+    fclose(f);
+
+    g_test_init(&argc, &argv, NULL);
+
+    if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) {
+        qtest_add_func("acpi/tcg", test_acpi_tcg);

Minor observation: Stefan's patch had "/qdev/..." whereas this is "acpi/..." - please compare the in-tree qtests and/or make check V=1.

Other than that looks okay, although I have mixed feelings about executing TCG code inside qtest - pro gives it some more testing, con requires it to work on the host platform.

Andreas

Quoted 24 lines
tests/acpi-test.c new file +3 -0
+    }
+    return g_test_run();
+}
tests/Makefile +2 -0
index fa4c9f0..62a0a5d 100644
@@ -64,6 +64,7 @@ check-qtest-i386-y += tests/ide-test$(EXESUF)
 check-qtest-i386-y += tests/hd-geo-test$(EXESUF)
 gcov-files-i386-y += hw/hd-geometry.c
 check-qtest-i386-y += tests/boot-order-test$(EXESUF)
+check-qtest-i386-y += tests/acpi-test$(EXESUF)
 check-qtest-i386-y += tests/rtc-test$(EXESUF)
 check-qtest-i386-y += tests/i440fx-test$(EXESUF)
 check-qtest-i386-y += tests/fw_cfg-test$(EXESUF)
@@ -171,6 +172,7 @@ tests/fdc-test$(EXESUF): tests/fdc-test.o
 tests/ide-test$(EXESUF): tests/ide-test.o $(libqos-pc-obj-y)
 tests/hd-geo-test$(EXESUF): tests/hd-geo-test.o
 tests/boot-order-test$(EXESUF): tests/boot-order-test.o $(libqos-obj-y)
+tests/acpi-test$(EXESUF): tests/acpi-test.o $(libqos-obj-y)
 tests/tmp105-test$(EXESUF): tests/tmp105-test.o $(libqos-omap-obj-y)
 tests/i440fx-test$(EXESUF): tests/i440fx-test.o $(libqos-pc-obj-y)
 tests/fw_cfg-test$(EXESUF): tests/fw_cfg-test.o $(libqos-pc-obj-y)
Signature · 2 lines
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
#3 lore raw

Re: [Qemu-devel] [PATCH v2 2/2] acpi-test: basic acpi unit-test

Quoted 164 lines · Andreas Färber

Am 06.11.2013 15:53, schrieb Michael S. Tsirkin:

Quoted 149 lines

We run bios, and boot a minimal boot sector that immediately halts. Then poke at memory to find ACPI tables.

This only checks that RSDP is there.
More will be added later.

Cc Andreas Färber <[email protected]>
Cc Markus Armbruster <[email protected]>
Cc Paolo Bonzini <[email protected]>

---

changes from v1:
address style comments by Markus, Andreas add cli to disable interrupts as suggested by Paolo

 tests/acpi-test.c | 135 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/Makefile    |   2 +
 2 files changed, 137 insertions(+)
 create mode 100644 tests/acpi-test.c
tests/acpi-test.c new file +122 -0
new file mode 100644
index 0000000..468c4f5
@@ -0,0 +1,135 @@
+/*
+ * Boot order test cases.
+ *
+ * Copyright (c) 2013 Red Hat Inc.
+ *
+ * Authors:
+ *  Michael S. Tsirkin <[email protected]>,
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include <string.h>
+#include <stdio.h>
+#include <glib.h>
+#include "libqtest.h"
+
+typedef struct {
+    const char *args;
+    uint64_t expected_boot;
+    uint64_t expected_reboot;
+} boot_order_test;
+
+#define LOW(x) ((x) & 0xff)
+#define HIGH(x) ((x) >> 8)
+
+#define SIGNATURE 0xdead
+#define SIGNATURE_OFFSET 0x10
+#define BOOT_SECTOR_ADDRESS 0x7c00
+
+/* Boot sector code: write SIGNATURE into memory,
+ * then halt.
+ */
+static uint8_t boot_sector[0x200] = {
+    /* 7c00: mov $0xdead,%ax */
+    [0x00] = 0xb8,
+    [0x01] = LOW(SIGNATURE),
+    [0x02] = HIGH(SIGNATURE),
+    /* 7c03:  mov %ax,0x7c10 */
+    [0x03] = 0xa3,
+    [0x04] = LOW(BOOT_SECTOR_ADDRESS + SIGNATURE_OFFSET),
+    [0x05] = HIGH(BOOT_SECTOR_ADDRESS + SIGNATURE_OFFSET),
+    /* 7c06: cli */
+    [0x06] = 0xfa,
+    /* 7c07: hlt */
+    [0x07] = 0xf4,
+    /* 7c08: jmp 0x7c07=0x7c0a-3 */
+    [0x08] = 0xeb,
+    [0x09] = LOW(-3),
+    /* We mov 0xdead here: set value to make debugging easier */
+    [SIGNATURE_OFFSET] = LOW(0xface),
+    [SIGNATURE_OFFSET + 1] = HIGH(0xface),
+    /* End of boot sector marker */
+    [0x1FE] = 0x55,
+    [0x1FF] = 0xAA,
+};
+
+static const char *disk = "tests/acpi-test-disk.raw";
+
+static void test_acpi_one(const char *params)
+{
+    char *args;
+    uint8_t signature_low;
+    uint8_t signature_high;
+    uint16_t signature;
+    int i;
+    uint32_t off;
+
+
+    args = g_strdup_printf("-net none -display none %s %s",
+                           params ? params : "", disk);
+    qtest_start(args);
+
+   /* Wait at most 1 minute */
+#define TEST_DELAY (1 * G_USEC_PER_SEC / 10)
+#define TEST_CYCLES MAX((60 * G_USEC_PER_SEC / TEST_DELAY), 1)
+
+    /* Poll until code has run and modified memory.  Once it has we know BIOS
+     * initialization is done.  TODO: check that IP reached the halt
+     * instruction.
+     */
+    for (i = 0; i < TEST_CYCLES; ++i) {
+        signature_low = readb(BOOT_SECTOR_ADDRESS + SIGNATURE_OFFSET);
+        signature_high = readb(BOOT_SECTOR_ADDRESS + SIGNATURE_OFFSET + 1);
+        signature = (signature_high << 8) | signature_low;
+        if (signature == SIGNATURE) {
+            break;
+        }
+        g_usleep(TEST_DELAY);
+    }
+    g_assert_cmphex(signature, ==, SIGNATURE);
+
+    /* OK, now find RSDP */
+    for (off = 0xf0000; off < 0x100000; off += 0x10)
+    {
+        uint8_t sig[] = "RSD PTR ";
+        int i;
+
+        for (i = 0; i < sizeof sig - 1; ++i) {
+            sig[i] = readb(off + i);
+        }
+
+        if (!memcmp(sig, "RSD PTR ", sizeof sig)) {
+            break;
+        }
+    }
+
+    g_assert_cmphex(off, <, 0x100000);
+
+    qtest_quit(global_qtest);
+    g_free(args);
+}
+
+static void test_acpi_tcg(void)
+{
+    /* Supplying -machine accel argument overrides the default (qtest).
+     * This is to make guest actually run.
+     */
+    test_acpi_one("-machine accel=tcg");
+}
+
+int main(int argc, char *argv[])

tests/acpi-test.c line 132

Quoted 10 lines
tests/acpi-test.c new file +10 -0
+{
+    const char *arch = qtest_get_arch();
+    FILE *f = fopen(disk, "w");
+    fwrite(boot_sector, 1, sizeof boot_sector, f);
+    fclose(f);
+
+    g_test_init(&argc, &argv, NULL);
+
+    if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) {
+        qtest_add_func("acpi/tcg", test_acpi_tcg);

Minor observation: Stefan's patch had "/qdev/..." whereas this is "acpi/..." - please compare the in-tree qtests and/or make check V=1.

Quoted 3 lines

Other than that looks okay, although I have mixed feelings about executing TCG code inside qtest - pro gives it some more testing, con requires it to work on the host platform.

Is there a lot of value in qemu that can't run guest code?

Quoted 31 lines

Andreas

Quoted 24 lines
tests/acpi-test.c new file +3 -0
+    }
+    return g_test_run();
+}
tests/Makefile +2 -0
index fa4c9f0..62a0a5d 100644
@@ -64,6 +64,7 @@ check-qtest-i386-y += tests/ide-test$(EXESUF)
 check-qtest-i386-y += tests/hd-geo-test$(EXESUF)
 gcov-files-i386-y += hw/hd-geometry.c
 check-qtest-i386-y += tests/boot-order-test$(EXESUF)
+check-qtest-i386-y += tests/acpi-test$(EXESUF)
 check-qtest-i386-y += tests/rtc-test$(EXESUF)
 check-qtest-i386-y += tests/i440fx-test$(EXESUF)
 check-qtest-i386-y += tests/fw_cfg-test$(EXESUF)
@@ -171,6 +172,7 @@ tests/fdc-test$(EXESUF): tests/fdc-test.o
 tests/ide-test$(EXESUF): tests/ide-test.o $(libqos-pc-obj-y)
 tests/hd-geo-test$(EXESUF): tests/hd-geo-test.o
 tests/boot-order-test$(EXESUF): tests/boot-order-test.o $(libqos-obj-y)
+tests/acpi-test$(EXESUF): tests/acpi-test.o $(libqos-obj-y)
 tests/tmp105-test$(EXESUF): tests/tmp105-test.o $(libqos-omap-obj-y)
 tests/i440fx-test$(EXESUF): tests/i440fx-test.o $(libqos-pc-obj-y)
 tests/fw_cfg-test$(EXESUF): tests/fw_cfg-test.o $(libqos-pc-obj-y)
Signature · 2 lines
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg