qtest: split configuration of qtest accelerator and chardev
PATCH v2 1/2 qtest: split configuration of qtest accelerator and chardev
From: Paolo Bonzini <[email protected]>
qtest uses the icount infrastructure to implement a test-driven vm_clock. This however is not necessary when using -qtest as a "probe" together with a normal TCG-, KVM- or Xen-based virtual machine. Hence, split out the call to configure_icount into a new function that is called only for "-machine accel=qtest"; and disable those commands when running with an accelerator other than qtest.
This also fixes an assertion failure with "qemu-system-x86_64 -machine accel=qtest" but no -qtest option. This is a valid case, albeit somewhat weird; nothing will happen in the VM but you'll still be able to interact with the monitor or the GUI.
Now that qtest_init is not limited to an int(void) function, change global variables that are not used outside qtest_init to arguments.
And finally, cleanup useless parts of include/sysemu/qtest.h. The file is not used at all for user-only emulation, and qtest is not available on Win32 due to its usage of sigwait.
--- include/sysemu/qtest.h | 25 +++++-------------------- qtest.c | 20 ++++++++++---------- vl.c | 8 +++++--- 3 files changed, 20 insertions(+), 33 deletions(-)
include/sysemu/qtest.h +5 -20
@@ -16,38 +16,23 @@#include "qemu-common.h" -#if !defined(CONFIG_USER_ONLY )extern bool qtest_allowed; -extern const char *qtest_chrdev; -extern const char *qtest_log;static inline bool qtest_enabled (void ) {return qtest_allowed; } +int qtest_init_accel (void ); +void qtest_init (const char *qtest_chrdev,const char *qtest_log); +static inline int qtest_available (void ) { +#ifdef CONFIG_POSIX return 1 ; -} - -int qtest_init (void );#else -static inline bool qtest_enabled (void ) -{ -return false; -} - -static inline int qtest_available (void ) -{ -return 0 ; -} - -static inline int qtest_init (void ) -{return 0 ; -} -#endif +}#endif
qtest.c +10 -10
@@ -22,8 +22,6 @@#define MAX_IRQ 256 -const char *qtest_chrdev; -const char *qtest_log;bool qtest_allowed;static DeviceState *irq_intercept_dev;
@@ -406,7 +404,7 @@ static void qtest_process_command(CharDriverState *chr, gchar **words)qtest_send_prefix (chr);qtest_send (chr,"OK\n" ); - }else if (strcmp (words[0 ],"clock_step" ) ==0 ) { + }else if (qtest_enabled () &&strcmp (words[0 ],"clock_step" ) ==0 ) {int64_t ns;if (words[1 ]) {
@@ -417,7 +415,7 @@ static void qtest_process_command(CharDriverState *chr, gchar **words)qtest_clock_warp (qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ) + ns);qtest_send_prefix (chr);qtest_send (chr,"OK %" PRIi64"\n" , (int64_t )qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL )); - }else if (strcmp (words[0 ],"clock_set" ) ==0 ) { + }else if (qtest_enabled () &&strcmp (words[0 ],"clock_set" ) ==0 ) {int64_t ns;g_assert (words[1 ]);
@@ -502,13 +500,17 @@ static void qtest_event(void *opaque, int event) } } -int qtest_init (void ) +int qtest_init_accel (void ) { -CharDriverState *chr; +configure_icount ("0" ); -g_assert (qtest_chrdev !=NULL ); +return 0 ; +} + +void qtest_init (const char *qtest_chrdev,const char *qtest_log) +{ +CharDriverState *chr; -configure_icount ("0" ); chr =qemu_chr_new ("qtest" , qtest_chrdev,NULL );qemu_chr_add_handlers (chr, qtest_can_read, qtest_read, qtest_event, chr);
@@ -525,6 +527,4 @@ int qtest_init(void) } qtest_chr = chr; - -return 0 ; }
vl.c +5 -3
@@ -2622,7 +2622,7 @@ static struct { { "tcg", "tcg", tcg_available, tcg_init, &tcg_allowed }, { "xen", "Xen", xen_available, xen_init, &xen_allowed }, { "kvm", "KVM", kvm_available, kvm_init, &kvm_allowed }, - { "qtest", "QTest", qtest_available, qtest_init, &qtest_allowed }, + { "qtest", "QTest", qtest_available, qtest_init_accel, &qtest_allowed }, };static int configure_accelerator (void )
@@ -2834,6 +2834,8 @@ int main(int argc, char **argv, char **envp)QEMUMachine *machine;const char *cpu_model;const char *vga_model ="none" ; +const char *qtest_chrdev =NULL ; +const char *qtest_log =NULL ;const char *pid_file =NULL ;const char *incoming =NULL ;#ifdef CONFIG_VNC
@@ -4039,8 +4041,8 @@ int main(int argc, char **argv, char **envp)configure_accelerator (); -if (!qtest_enabled () && qtest_chrdev) { -qtest_init (); +if (qtest_chrdev) { +qtest_init (qtest_chrdev, qtest_log); } machine_opts =qemu_get_machine_opts ();
Signature · 1 line
MST
PATCH v2 2/2 acpi-test: basic acpi unit-test
We run bios, and boot a minimal boot sector that immediately halts. Then poke at memory to find ACPI tables.
This only checks that RSDP is there.
More will be added later.
---
changes from v1:
address style comments by Markus, Andreas add cli to disable interrupts as suggested by Paolo
tests/acpi-test.c | 135 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ tests/Makefile | 2 + 2 files changed, 137 insertions(+) create mode 100644 tests/acpi-test.c
tests/acpi-test.c new file +135 -0
@@ -0,0 +1,135 @@ +/* +* Boot order test cases. +* +* Copyright (c) 2013 Red Hat Inc. +* +* Authors: +* Michael S. Tsirkin <[email protected]>, +* +* This work is licensed under the terms of the GNU GPL, version 2 or later. +* See the COPYING file in the top-level directory. +*/ + +#include <string.h> +#include <stdio.h> +#include <glib.h> +#include "libqtest.h" + +typedef struct { +const char *args; +uint64_t expected_boot; +uint64_t expected_reboot; +}boot_order_test ; + +#define LOW (x) ((x) & 0xff) +#define HIGH (x) ((x) >> 8) + +#define SIGNATURE 0xdead +#define SIGNATURE_OFFSET 0x10 +#define BOOT_SECTOR_ADDRESS 0x7c00 + +/* Boot sector code: write SIGNATURE into memory, +* then halt. +*/ +static uint8_t boot_sector[0x200 ] = { +/* 7c00: mov $0xdead,%ax */ + [0x00 ] =0xb8 , + [0x01 ] =LOW (SIGNATURE ), + [0x02 ] =HIGH (SIGNATURE ), +/* 7c03: mov %ax,0x7c10 */ + [0x03 ] =0xa3 , + [0x04 ] =LOW (BOOT_SECTOR_ADDRESS +SIGNATURE_OFFSET ), + [0x05 ] =HIGH (BOOT_SECTOR_ADDRESS +SIGNATURE_OFFSET ), +/* 7c06: cli */ + [0x06 ] =0xfa , +/* 7c07: hlt */ + [0x07 ] =0xf4 , +/* 7c08: jmp 0x7c07=0x7c0a-3 */ + [0x08 ] =0xeb , + [0x09 ] =LOW (-3 ), +/* We mov 0xdead here: set value to make debugging easier */ + [SIGNATURE_OFFSET ] =LOW (0xface ), + [SIGNATURE_OFFSET +1 ] =HIGH (0xface ), +/* End of boot sector marker */ + [0x1FE ] =0x55 , + [0x1FF ] =0xAA , +}; + +static const char *disk ="tests/acpi-test-disk.raw" ; + +static void test_acpi_one (const char *params) +{ +char *args; +uint8_t signature_low; +uint8_t signature_high; +uint16_t signature; +int i; +uint32_t off; + + + args =g_strdup_printf ("-net none -display none %s %s" , + params ? params :"" , disk); +qtest_start (args); + +/* Wait at most 1 minute */ +#define TEST_DELAY (1 * G_USEC_PER_SEC / 10) +#define TEST_CYCLES MAX((60 * G_USEC_PER_SEC / TEST_DELAY), 1) + +/* Poll until code has run and modified memory. Once it has we know BIOS +* initialization is done. TODO: check that IP reached the halt +* instruction. +*/ +for (i =0 ; i <TEST_CYCLES ; ++i) { + signature_low =readb (BOOT_SECTOR_ADDRESS +SIGNATURE_OFFSET ); + signature_high =readb (BOOT_SECTOR_ADDRESS +SIGNATURE_OFFSET +1 ); + signature = (signature_high <<8 ) | signature_low; +if (signature ==SIGNATURE ) { +break ; + } +g_usleep (TEST_DELAY ); + } + g_assert_cmphex(signature, ==, SIGNATURE); + +/* OK, now find RSDP */ +for (off =0xf0000 ; off <0x100000 ; off +=0x10 ) + { +uint8_t sig[] ="RSD PTR " ; +int i; + +for (i =0 ; i <sizeof sig -1 ; ++i) { + sig[i] =readb (off + i); + } + +if (!memcmp (sig,"RSD PTR " ,sizeof sig)) { +break ; + } + } + + g_assert_cmphex(off, <, 0x100000); + +qtest_quit (global_qtest); +g_free (args); +} + +static void test_acpi_tcg (void ) +{ +/* Supplying -machine accel argument overrides the default (qtest). +* This is to make guest actually run. +*/ +test_acpi_one ("-machine accel=tcg" ); +} + +int main (int argc,char *argv[]) +{ +const char *arch =qtest_get_arch (); +FILE *f =fopen (disk,"w" ); +fwrite (boot_sector,1 ,sizeof boot_sector, f); +fclose (f); + +g_test_init (&argc, &argv,NULL ); + +if (strcmp (arch,"i386" ) ==0 ||strcmp (arch,"x86_64" ) ==0 ) { +qtest_add_func ("acpi/tcg" , test_acpi_tcg); + } +return g_test_run (); +}
tests/Makefile +2 -0
@@ -64,6 +64,7 @@ check-qtest-i386-y += tests/ide-test$(EXESUF) check-qtest-i386-y += tests/hd-geo-test$(EXESUF) gcov-files-i386-y += hw/hd-geometry.c check-qtest-i386-y += tests/boot-order-test$(EXESUF) +check-qtest-i386-y += tests/acpi-test$(EXESUF) check-qtest-i386-y += tests/rtc-test$(EXESUF) check-qtest-i386-y += tests/i440fx-test$(EXESUF) check-qtest-i386-y += tests/fw_cfg-test$(EXESUF)
@@ -171,6 +172,7 @@ tests/fdc-test$(EXESUF): tests/fdc-test.o tests/ide-test$(EXESUF): tests/ide-test.o $(libqos-pc-obj-y) tests/hd-geo-test$(EXESUF): tests/hd-geo-test.o tests/boot-order-test$(EXESUF): tests/boot-order-test.o $(libqos-obj-y) +tests/acpi-test$(EXESUF): tests/acpi-test.o $(libqos-obj-y) tests/tmp105-test$(EXESUF): tests/tmp105-test.o $(libqos-omap-obj-y) tests/i440fx-test$(EXESUF): tests/i440fx-test.o $(libqos-pc-obj-y) tests/fw_cfg-test$(EXESUF): tests/fw_cfg-test.o $(libqos-pc-obj-y)
Signature · 1 line
MST
Re: [Qemu-devel] [PATCH v2 2/2] acpi-test: basic acpi unit-test
Am 06.11.2013 15:53, schrieb Michael S. Tsirkin:
Quoted 149 lines
We run bios, and boot a minimal boot sector that immediately halts. Then poke at memory to find ACPI tables.
This only checks that RSDP is there.
More will be added later.Cc Andreas Färber <[email protected]>Cc Markus Armbruster <[email protected]>Cc Paolo Bonzini <[email protected]>Signed-off-by Michael S. Tsirkin <[email protected]>---
changes from v1:
address style comments by Markus, Andreas add cli to disable interrupts as suggested by Paolotests/acpi-test.c | 135 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ tests/Makefile | 2 + 2 files changed, 137 insertions(+) create mode 100644 tests/acpi-test.ctests/acpi-test.c new file +122
-0@@ -0,0 +1,135 @@ +/* +* Boot order test cases. +* +* Copyright (c) 2013 Red Hat Inc. +* +* Authors: +* Michael S. Tsirkin <[email protected]>, +* +* This work is licensed under the terms of the GNU GPL, version 2 or later. +* See the COPYING file in the top-level directory. +*/ + +#include <string.h> +#include <stdio.h> +#include <glib.h> +#include "libqtest.h" + +typedef struct { +const char *args; +uint64_t expected_boot; +uint64_t expected_reboot; +}boot_order_test ; + +#define LOW (x) ((x) & 0xff) +#define HIGH (x) ((x) >> 8) + +#define SIGNATURE 0xdead +#define SIGNATURE_OFFSET 0x10 +#define BOOT_SECTOR_ADDRESS 0x7c00 + +/* Boot sector code: write SIGNATURE into memory, +* then halt. +*/ +static uint8_t boot_sector[0x200 ] = { +/* 7c00: mov $0xdead,%ax */ + [0x00 ] =0xb8 , + [0x01 ] =LOW (SIGNATURE ), + [0x02 ] =HIGH (SIGNATURE ), +/* 7c03: mov %ax,0x7c10 */ + [0x03 ] =0xa3 , + [0x04 ] =LOW (BOOT_SECTOR_ADDRESS +SIGNATURE_OFFSET ), + [0x05 ] =HIGH (BOOT_SECTOR_ADDRESS +SIGNATURE_OFFSET ), +/* 7c06: cli */ + [0x06 ] =0xfa , +/* 7c07: hlt */ + [0x07 ] =0xf4 , +/* 7c08: jmp 0x7c07=0x7c0a-3 */ + [0x08 ] =0xeb , + [0x09 ] =LOW (-3 ), +/* We mov 0xdead here: set value to make debugging easier */ + [SIGNATURE_OFFSET ] =LOW (0xface ), + [SIGNATURE_OFFSET +1 ] =HIGH (0xface ), +/* End of boot sector marker */ + [0x1FE ] =0x55 , + [0x1FF ] =0xAA , +}; + +static const char *disk ="tests/acpi-test-disk.raw" ; + +static void test_acpi_one (const char *params) +{ +char *args; +uint8_t signature_low; +uint8_t signature_high; +uint16_t signature; +int i; +uint32_t off; + + + args =g_strdup_printf ("-net none -display none %s %s" , + params ? params :"" , disk); +qtest_start (args); + +/* Wait at most 1 minute */ +#define TEST_DELAY (1 * G_USEC_PER_SEC / 10) +#define TEST_CYCLES MAX((60 * G_USEC_PER_SEC / TEST_DELAY), 1) + +/* Poll until code has run and modified memory. Once it has we know BIOS +* initialization is done. TODO: check that IP reached the halt +* instruction. +*/ +for (i =0 ; i <TEST_CYCLES ; ++i) { + signature_low =readb (BOOT_SECTOR_ADDRESS +SIGNATURE_OFFSET ); + signature_high =readb (BOOT_SECTOR_ADDRESS +SIGNATURE_OFFSET +1 ); + signature = (signature_high <<8 ) | signature_low; +if (signature ==SIGNATURE ) { +break ; + } +g_usleep (TEST_DELAY ); + } + g_assert_cmphex(signature, ==, SIGNATURE); + +/* OK, now find RSDP */ +for (off =0xf0000 ; off <0x100000 ; off +=0x10 ) + { +uint8_t sig[] ="RSD PTR " ; +int i; + +for (i =0 ; i <sizeof sig -1 ; ++i) { + sig[i] =readb (off + i); + } + +if (!memcmp (sig,"RSD PTR " ,sizeof sig)) { +break ; + } + } + + g_assert_cmphex(off, <, 0x100000); + +qtest_quit (global_qtest); +g_free (args); +} + +static void test_acpi_tcg (void ) +{ +/* Supplying -machine accel argument overrides the default (qtest). +* This is to make guest actually run. +*/ +test_acpi_one ("-machine accel=tcg" ); +} + +int main (int argc,char *argv[])
tests/acpi-test.c line 132
Quoted 10 lines
tests/acpi-test.c new file +10
-0+{ +const char *arch =qtest_get_arch (); +FILE *f =fopen (disk,"w" ); +fwrite (boot_sector,1 ,sizeof boot_sector, f); +fclose (f); + +g_test_init (&argc, &argv,NULL ); + +if (strcmp (arch,"i386" ) ==0 ||strcmp (arch,"x86_64" ) ==0 ) { +qtest_add_func ("acpi/tcg" , test_acpi_tcg);
Minor observation: Stefan's patch had "/qdev/..." whereas this is "acpi/..." - please compare the in-tree qtests and/or make check V=1.
Other than that looks okay, although I have mixed feelings about executing TCG code inside qtest - pro gives it some more testing, con requires it to work on the host platform.
Andreas
Quoted 24 lines
tests/acpi-test.c new file +3
-0+ } +return g_test_run (); +}tests/Makefile +2
-0@@ -64,6 +64,7 @@ check-qtest-i386-y += tests/ide-test$(EXESUF) check-qtest-i386-y += tests/hd-geo-test$(EXESUF) gcov-files-i386-y += hw/hd-geometry.c check-qtest-i386-y += tests/boot-order-test$(EXESUF) +check-qtest-i386-y += tests/acpi-test$(EXESUF) check-qtest-i386-y += tests/rtc-test$(EXESUF) check-qtest-i386-y += tests/i440fx-test$(EXESUF) check-qtest-i386-y += tests/fw_cfg-test$(EXESUF)@@ -171,6 +172,7 @@ tests/fdc-test$(EXESUF): tests/fdc-test.o tests/ide-test$(EXESUF): tests/ide-test.o $(libqos-pc-obj-y) tests/hd-geo-test$(EXESUF): tests/hd-geo-test.o tests/boot-order-test$(EXESUF): tests/boot-order-test.o $(libqos-obj-y) +tests/acpi-test$(EXESUF): tests/acpi-test.o $(libqos-obj-y) tests/tmp105-test$(EXESUF): tests/tmp105-test.o $(libqos-omap-obj-y) tests/i440fx-test$(EXESUF): tests/i440fx-test.o $(libqos-pc-obj-y) tests/fw_cfg-test$(EXESUF): tests/fw_cfg-test.o $(libqos-pc-obj-y)
Signature · 2 lines
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
Re: [Qemu-devel] [PATCH v2 2/2] acpi-test: basic acpi unit-test
Quoted 164 lines · Andreas Färber
Am 06.11.2013 15:53, schrieb Michael S. Tsirkin:
Quoted 149 lines
We run bios, and boot a minimal boot sector that immediately halts. Then poke at memory to find ACPI tables.
This only checks that RSDP is there.
More will be added later.Cc Andreas Färber <[email protected]>Cc Markus Armbruster <[email protected]>Cc Paolo Bonzini <[email protected]>Signed-off-by Michael S. Tsirkin <[email protected]>---
changes from v1:
address style comments by Markus, Andreas add cli to disable interrupts as suggested by Paolotests/acpi-test.c | 135 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ tests/Makefile | 2 + 2 files changed, 137 insertions(+) create mode 100644 tests/acpi-test.ctests/acpi-test.c new file +122
-0@@ -0,0 +1,135 @@ +/* +* Boot order test cases. +* +* Copyright (c) 2013 Red Hat Inc. +* +* Authors: +* Michael S. Tsirkin <[email protected]>, +* +* This work is licensed under the terms of the GNU GPL, version 2 or later. +* See the COPYING file in the top-level directory. +*/ + +#include <string.h> +#include <stdio.h> +#include <glib.h> +#include "libqtest.h" + +typedef struct { +const char *args; +uint64_t expected_boot; +uint64_t expected_reboot; +}boot_order_test ; + +#define LOW (x) ((x) & 0xff) +#define HIGH (x) ((x) >> 8) + +#define SIGNATURE 0xdead +#define SIGNATURE_OFFSET 0x10 +#define BOOT_SECTOR_ADDRESS 0x7c00 + +/* Boot sector code: write SIGNATURE into memory, +* then halt. +*/ +static uint8_t boot_sector[0x200 ] = { +/* 7c00: mov $0xdead,%ax */ + [0x00 ] =0xb8 , + [0x01 ] =LOW (SIGNATURE ), + [0x02 ] =HIGH (SIGNATURE ), +/* 7c03: mov %ax,0x7c10 */ + [0x03 ] =0xa3 , + [0x04 ] =LOW (BOOT_SECTOR_ADDRESS +SIGNATURE_OFFSET ), + [0x05 ] =HIGH (BOOT_SECTOR_ADDRESS +SIGNATURE_OFFSET ), +/* 7c06: cli */ + [0x06 ] =0xfa , +/* 7c07: hlt */ + [0x07 ] =0xf4 , +/* 7c08: jmp 0x7c07=0x7c0a-3 */ + [0x08 ] =0xeb , + [0x09 ] =LOW (-3 ), +/* We mov 0xdead here: set value to make debugging easier */ + [SIGNATURE_OFFSET ] =LOW (0xface ), + [SIGNATURE_OFFSET +1 ] =HIGH (0xface ), +/* End of boot sector marker */ + [0x1FE ] =0x55 , + [0x1FF ] =0xAA , +}; + +static const char *disk ="tests/acpi-test-disk.raw" ; + +static void test_acpi_one (const char *params) +{ +char *args; +uint8_t signature_low; +uint8_t signature_high; +uint16_t signature; +int i; +uint32_t off; + + + args =g_strdup_printf ("-net none -display none %s %s" , + params ? params :"" , disk); +qtest_start (args); + +/* Wait at most 1 minute */ +#define TEST_DELAY (1 * G_USEC_PER_SEC / 10) +#define TEST_CYCLES MAX((60 * G_USEC_PER_SEC / TEST_DELAY), 1) + +/* Poll until code has run and modified memory. Once it has we know BIOS +* initialization is done. TODO: check that IP reached the halt +* instruction. +*/ +for (i =0 ; i <TEST_CYCLES ; ++i) { + signature_low =readb (BOOT_SECTOR_ADDRESS +SIGNATURE_OFFSET ); + signature_high =readb (BOOT_SECTOR_ADDRESS +SIGNATURE_OFFSET +1 ); + signature = (signature_high <<8 ) | signature_low; +if (signature ==SIGNATURE ) { +break ; + } +g_usleep (TEST_DELAY ); + } + g_assert_cmphex(signature, ==, SIGNATURE); + +/* OK, now find RSDP */ +for (off =0xf0000 ; off <0x100000 ; off +=0x10 ) + { +uint8_t sig[] ="RSD PTR " ; +int i; + +for (i =0 ; i <sizeof sig -1 ; ++i) { + sig[i] =readb (off + i); + } + +if (!memcmp (sig,"RSD PTR " ,sizeof sig)) { +break ; + } + } + + g_assert_cmphex(off, <, 0x100000); + +qtest_quit (global_qtest); +g_free (args); +} + +static void test_acpi_tcg (void ) +{ +/* Supplying -machine accel argument overrides the default (qtest). +* This is to make guest actually run. +*/ +test_acpi_one ("-machine accel=tcg" ); +} + +int main (int argc,char *argv[])tests/acpi-test.c line 132
Quoted 10 lines
tests/acpi-test.c new file +10
-0+{ +const char *arch =qtest_get_arch (); +FILE *f =fopen (disk,"w" ); +fwrite (boot_sector,1 ,sizeof boot_sector, f); +fclose (f); + +g_test_init (&argc, &argv,NULL ); + +if (strcmp (arch,"i386" ) ==0 ||strcmp (arch,"x86_64" ) ==0 ) { +qtest_add_func ("acpi/tcg" , test_acpi_tcg);Minor observation: Stefan's patch had "/qdev/..." whereas this is "acpi/..." - please compare the in-tree qtests and/or make check V=1.
Quoted 3 lines
Other than that looks okay, although I have mixed feelings about executing TCG code inside qtest - pro gives it some more testing, con requires it to work on the host platform.
Is there a lot of value in qemu that can't run guest code?
Quoted 31 lines
Andreas
Quoted 24 lines
tests/acpi-test.c new file +3
-0+ } +return g_test_run (); +}tests/Makefile +2
-0@@ -64,6 +64,7 @@ check-qtest-i386-y += tests/ide-test$(EXESUF) check-qtest-i386-y += tests/hd-geo-test$(EXESUF) gcov-files-i386-y += hw/hd-geometry.c check-qtest-i386-y += tests/boot-order-test$(EXESUF) +check-qtest-i386-y += tests/acpi-test$(EXESUF) check-qtest-i386-y += tests/rtc-test$(EXESUF) check-qtest-i386-y += tests/i440fx-test$(EXESUF) check-qtest-i386-y += tests/fw_cfg-test$(EXESUF)@@ -171,6 +172,7 @@ tests/fdc-test$(EXESUF): tests/fdc-test.o tests/ide-test$(EXESUF): tests/ide-test.o $(libqos-pc-obj-y) tests/hd-geo-test$(EXESUF): tests/hd-geo-test.o tests/boot-order-test$(EXESUF): tests/boot-order-test.o $(libqos-obj-y) +tests/acpi-test$(EXESUF): tests/acpi-test.o $(libqos-obj-y) tests/tmp105-test$(EXESUF): tests/tmp105-test.o $(libqos-omap-obj-y) tests/i440fx-test$(EXESUF): tests/i440fx-test.o $(libqos-pc-obj-y) tests/fw_cfg-test$(EXESUF): tests/fw_cfg-test.o $(libqos-pc-obj-y)Signature · 2 lines
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg