Skip to contentSkip to conversation

add support for Ka-Ro TX6 modules

PATCH New Lothar Waßmann 1 participant 5 messages Dec 12, 2013

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

This patchset adds support for the Ka-Ro electronics TX6 modules. There are four distinct module types with i.MX6Q or i.MX6DL and LVDS or LCD interface.

The patchset also adds some new pingroups to the imx6qdl pingroup include file that are used by the TX6 dts files.

The first patch adds aliases for the CAN nodes that are used by U-Boot to modify the DTB according to environment settings.

#1 lore raw

PATCH 1/4 ARM: dts: imx6qdl: add aliases for can interfaces

---
 arch/arm/boot/dts/imx6qdl.dtsi |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
arch/arm/boot/dts/imx6qdl.dtsi +2 -0
index 16f6974..858ecd7 100644
@@ -14,6 +14,8 @@
 
 / {
 	aliases {
+		can0 = &can1;
+		can1 = &can2;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
Signature · 1 line
1.7.2.5
#2 lore raw

PATCH 2/4 ARM: dts: imx6qdl: add pingroup for enet interface in RMII mode

In reply to Lothar Waßmann

This will be used by the TX6 modules from Ka-Ro electronics.

---
 arch/arm/boot/dts/imx6qdl-pingrp.h |   11 +++++++++++
 1 files changed, 11 insertions(+), 0 deletions(-)
arch/arm/boot/dts/imx6qdl-pingrp.h +11 -0
index 8d71b13..4932249 100644
@@ -100,6 +100,17 @@
 	MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL		0x1b0b0 \
 	MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
 
+#define MX6QDL_ENET_PINGRP4					\
+	MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0	\
+	MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0	\
+	MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0	\
+	MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0	\
+	MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0	\
+	MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0	\
+	MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0	\
+	MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0	\
+	MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
+
 #define MX6QDL_ESAI_PINGRP1 \
 	MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK		0x1b030 \
 	MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK		0x1b030 \
Signature · 1 line
1.7.2.5
#3 lore raw

PATCH 3/4 ARM: dts: imx6qdl: add new pingroup for audmux

In reply to Lothar Waßmann

This will be used by the TX6 modules from Ka-Ro electronics.

---
 arch/arm/boot/dts/imx6qdl-pingrp.h |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)
arch/arm/boot/dts/imx6qdl-pingrp.h +6 -0
index 4932249..68f18e9 100644
@@ -32,6 +32,12 @@
 	MX6QDL_PAD_EIM_D25__AUD5_RXC			0x130b0 \
 	MX6QDL_PAD_DISP0_DAT19__AUD5_RXD		0x130b0
 
+#define MX6QDL_AUDMUX_PINGRP5 \
+	MX6QDL_PAD_KEY_ROW1__AUD5_RXD			0x130b0 \
+	MX6QDL_PAD_KEY_COL0__AUD5_TXC			0x130b0 \
+	MX6QDL_PAD_KEY_ROW0__AUD5_TXD			0x110b0 \
+	MX6QDL_PAD_KEY_COL1__AUD5_TXFS			0x130b0
+
 #define MX6QDL_ECSPI1_PINGRP1 \
 	MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x100b1 \
 	MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0x100b1 \
Signature · 1 line
1.7.2.5
#4 lore raw

PATCH 4/4 ARM: dts: imx6qdl: add support for Ka-Ro TX6 modules

In reply to Lothar Waßmann

This patch adds support for the Ka-Ro electronics GmbH TX6 modules. There are four distinct module types.
Two equipped with an i.MX6Q processor, two with i.MX6DL. Each of these has either an LVDS display interface or a parallel LCD interface.

---
 arch/arm/boot/dts/Makefile             |    4 +
 arch/arm/boot/dts/imx6dl-tx6u-801x.dts |  350 +++++++++++++++++++++++++
 arch/arm/boot/dts/imx6dl-tx6u-811x.dts |  242 ++++++++++++++++++
 arch/arm/boot/dts/imx6q-tx6q-101x.dts  |  350 +++++++++++++++++++++++++
 arch/arm/boot/dts/imx6q-tx6q-111x.dts  |  246 ++++++++++++++++++
 arch/arm/boot/dts/imx6qdl-tx6.dtsi     |  434 ++++++++++++++++++++++++++++++++
 6 files changed, 1626 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-801x.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-811x.dts
 create mode 100644 arch/arm/boot/dts/imx6q-tx6q-101x.dts
 create mode 100644 arch/arm/boot/dts/imx6q-tx6q-111x.dts
 create mode 100644 arch/arm/boot/dts/imx6qdl-tx6.dtsi
arch/arm/boot/dts/Makefile +4 -0
index 535c98f..40175a9 100644
@@ -152,6 +152,8 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx6dl-gw54xx.dtb \
 	imx6dl-sabreauto.dtb \
 	imx6dl-sabresd.dtb \
+	imx6dl-tx6u-801x.dtb \
+	imx6dl-tx6u-811x.dtb \
 	imx6dl-wandboard.dtb \
 	imx6q-arm2.dtb \
 	imx6q-cm-fx6.dtb \
@@ -166,6 +168,8 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx6q-sabrelite.dtb \
 	imx6q-sabresd.dtb \
 	imx6q-sbc6x.dtb \
+	imx6q-tx6q-101x.dtb \
+	imx6q-tx6q-111x.dtb \
 	imx6q-udoo.dtb \
 	imx6q-wandboard.dtb \
 	imx6sl-evk.dtb \
arch/arm/boot/dts/imx6dl-tx6u-801x.dts new file +350 -0

350 lines not on this page · raw message

arch/arm/boot/dts/imx6dl-tx6u-811x.dts new file +242 -0

242 lines not on this page · raw message

arch/arm/boot/dts/imx6q-tx6q-101x.dts new file +350 -0

350 lines not on this page · raw message

arch/arm/boot/dts/imx6q-tx6q-111x.dts new file +246 -0

246 lines not on this page · raw message

arch/arm/boot/dts/imx6qdl-tx6.dtsi new file +434 -0

434 lines not on this page · raw message

Signature · 1 line
1.7.2.5