add support for Ka-Ro TX6 modules
Subsystems (3)
This patchset adds support for the Ka-Ro electronics TX6 modules. There are four distinct module types with i.MX6Q or i.MX6DL and LVDS or LCD interface.
The patchset also adds some new pingroups to the imx6qdl pingroup include file that are used by the TX6 dts files.
The first patch adds aliases for the CAN nodes that are used by U-Boot to modify the DTB according to environment settings.
PATCH 1/4 ARM: dts: imx6qdl: add aliases for can interfaces
--- arch/arm/boot/dts/imx6qdl.dtsi | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-)
arch/arm/boot/dts/imx6qdl.dtsi +2 -0
@@ -14,6 +14,8 @@ / { aliases { + can0 = &can1; + can1 = &can2; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3;
Signature · 1 line
1.7.2.5
PATCH 2/4 ARM: dts: imx6qdl: add pingroup for enet interface in RMII mode
In reply to Lothar WaßmannThis will be used by the TX6 modules from Ka-Ro electronics.
--- arch/arm/boot/dts/imx6qdl-pingrp.h | 11 +++++++++++ 1 files changed, 11 insertions(+), 0 deletions(-)
arch/arm/boot/dts/imx6qdl-pingrp.h +11 -0
@@ -100,6 +100,17 @@ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 \ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 +#define MX6QDL_ENET_PINGRP4 \ + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 \ + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 \ + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 \ + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 \ + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 \ + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 \ + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 \ + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 \ + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + #define MX6QDL_ESAI_PINGRP1 \ MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1b030 \ MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030 \
Signature · 1 line
1.7.2.5
PATCH 3/4 ARM: dts: imx6qdl: add new pingroup for audmux
In reply to Lothar WaßmannThis will be used by the TX6 modules from Ka-Ro electronics.
--- arch/arm/boot/dts/imx6qdl-pingrp.h | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-)
arch/arm/boot/dts/imx6qdl-pingrp.h +6 -0
@@ -32,6 +32,12 @@ MX6QDL_PAD_EIM_D25__AUD5_RXC 0x130b0 \ MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 +#define MX6QDL_AUDMUX_PINGRP5 \ + MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 \ + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 \ + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 \ + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 + #define MX6QDL_ECSPI1_PINGRP1 \ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 \ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 \
Signature · 1 line
1.7.2.5
PATCH 4/4 ARM: dts: imx6qdl: add support for Ka-Ro TX6 modules
In reply to Lothar WaßmannThis patch adds support for the Ka-Ro electronics GmbH TX6 modules. There are four distinct module types.
Two equipped with an i.MX6Q processor, two with i.MX6DL. Each of these has either an LVDS display interface or a parallel LCD interface.
--- arch/arm/boot/dts/Makefile | 4 + arch/arm/boot/dts/imx6dl-tx6u-801x.dts | 350 +++++++++++++++++++++++++ arch/arm/boot/dts/imx6dl-tx6u-811x.dts | 242 ++++++++++++++++++ arch/arm/boot/dts/imx6q-tx6q-101x.dts | 350 +++++++++++++++++++++++++ arch/arm/boot/dts/imx6q-tx6q-111x.dts | 246 ++++++++++++++++++ arch/arm/boot/dts/imx6qdl-tx6.dtsi | 434 ++++++++++++++++++++++++++++++++ 6 files changed, 1626 insertions(+), 0 deletions(-) create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-801x.dts create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-811x.dts create mode 100644 arch/arm/boot/dts/imx6q-tx6q-101x.dts create mode 100644 arch/arm/boot/dts/imx6q-tx6q-111x.dts create mode 100644 arch/arm/boot/dts/imx6qdl-tx6.dtsi
arch/arm/boot/dts/Makefile +4 -0
@@ -152,6 +152,8 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6dl-gw54xx.dtb \ imx6dl-sabreauto.dtb \ imx6dl-sabresd.dtb \ + imx6dl-tx6u-801x.dtb \ + imx6dl-tx6u-811x.dtb \ imx6dl-wandboard.dtb \ imx6q-arm2.dtb \ imx6q-cm-fx6.dtb \
@@ -166,6 +168,8 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ imx6q-sbc6x.dtb \ + imx6q-tx6q-101x.dtb \ + imx6q-tx6q-111x.dtb \ imx6q-udoo.dtb \ imx6q-wandboard.dtb \ imx6sl-evk.dtb \
arch/arm/boot/dts/imx6dl-tx6u-801x.dts new file +350 -0
350 lines not on this page · raw message
arch/arm/boot/dts/imx6dl-tx6u-811x.dts new file +242 -0
242 lines not on this page · raw message
arch/arm/boot/dts/imx6q-tx6q-101x.dts new file +350 -0
350 lines not on this page · raw message
arch/arm/boot/dts/imx6q-tx6q-111x.dts new file +246 -0
246 lines not on this page · raw message
arch/arm/boot/dts/imx6qdl-tx6.dtsi new file +434 -0
434 lines not on this page · raw message
Signature · 1 line
1.7.2.5