Broadwell HW semaphores
Subsystems (2)
cover Broadwell HW semaphores
This patch series implements hardware semaphores to be on par with support of other platforms. The biggest change in the series is the removal of the mailboxes we previously had. To replace this, there is a 4k BO allocated for the semaphore communication. This could have also been done in the HWSP. Since we have per-ring HWSP, I don't see a big one, and I have a theory that the cache locality would be a win.
There are two very important notes:
1. gem_ring_sync_loop is one of the best focus tests that we have for semaphores. This test is currently hanging. I still get through many sync sequences between rings (in fact, the test has even succeeded a few times), and the hang is on an unrelated instruction. I have some suspicion that the issue is actually related to the MI_FLUSH_DW and not the semaphores at all.
2. The debug/error code which reads the semaphores is not working when read back from the CPU. This is an extremely worrying thing, and I am somewhat hopeful that review will the solution. Reading the same page through the GTT works as expected. See the debugfs patch for a nice isolated example of what fails (though the error collection code contains the same problem).
With that, the patches probably should not be merged completely - but maybe some of the prep patches can be merged now, making the rebase pain lessened while I finish debugging. Anyone who finds any bugs that solve my issues will be my best friend for a week.
Ben Widawsky (17):
drm/i915: Reorder/respace MI instruction definition drm/i915: Don't emit mbox updates without semaphores drm/i915: Move semaphore specific ring members to struct drm/i915: Virtualize the ringbuffer signal func drm/i915: Move ring_begin to signal()
drm/i915: Make semaphore updates more precise drm/i915: gen specific semaphore info
drm/i915: Create for_all_rings
drm/i915: init ring->id early
drm/i915/bdw: implement semaphore signal drm/i915/bdw: implement semaphore wait drm/i915: FORCE_RESTORE for gen8 semaphores drm/i915/bdw: poll semaphores
drm/i915: Extract semaphore error collection drm/i915/bdw: collect semaphore error state drm/i915: unleash semaphores on gen8
drm/i915: semaphore debugfs
drivers/gpu/drm/i915/i915_debugfs.c | 69 +++++++ drivers/gpu/drm/i915/i915_drv.c | 6 - drivers/gpu/drm/i915/i915_drv.h | 6 + drivers/gpu/drm/i915/i915_gem.c | 16 +- drivers/gpu/drm/i915/i915_gem_context.c | 9 + drivers/gpu/drm/i915/i915_gpu_error.c | 75 ++++++-- drivers/gpu/drm/i915/i915_reg.h | 58 +++--- drivers/gpu/drm/i915/intel_ringbuffer.c | 332 ++++++++++++++++++++++++-------- drivers/gpu/drm/i915/intel_ringbuffer.h | 85 +++++++- 9 files changed, 514 insertions(+), 142 deletions(-)
Signature · 1 line
1.8.5.1
PATCH 1/17 drm/i915: Reorder/respace MI instruction definition
A few command were out of numerical order and had different spacing. Put them back in numerical order, with proper spacing.
--- drivers/gpu/drm/i915/i915_reg.h | 52 ++++++++++++++++++++--------------------- 1 file changed, 26 insertions(+), 26 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +26 -26
@@ -193,10 +193,13 @@#define MI_SCENE_COUNT (1 << 3)/* just increment scene count */ #define MI_END_SCENE (1 << 4)/* flush binner and incr scene count */ #define MI_INVALIDATE_ISP (1 << 5)/* invalidate indirect state pointers */ +#define MI_REPORT_HEAD MI_INSTR(0x07, 0) +#define MI_ARB_ON_OFF MI_INSTR(0x08, 0) +#define MI_ARB_ENABLE (1<<0) +#define MI_ARB_DISABLE (0<<0)#define MI_BATCH_BUFFER_END MI_INSTR(0x0a, 0)#define MI_SUSPEND_FLUSH MI_INSTR(0x0b, 0)#define MI_SUSPEND_FLUSH_EN (1<<0) -#define MI_REPORT_HEAD MI_INSTR(0x07, 0)#define MI_OVERLAY_FLIP MI_INSTR(0x11, 0)#define MI_OVERLAY_CONTINUE (0x0<<21)#define MI_OVERLAY_ON (0x1<<21)
@@ -212,10 +215,24 @@#define MI_DISPLAY_FLIP_IVB_SPRITE_B (3 << 19)#define MI_DISPLAY_FLIP_IVB_PLANE_C (4 << 19)#define MI_DISPLAY_FLIP_IVB_SPRITE_C (5 << 19) -#define MI_ARB_ON_OFF MI_INSTR(0x08, 0) -#define MI_ARB_ENABLE (1<<0) -#define MI_ARB_DISABLE (0<<0) - +#define MI_SEMAPHORE_MBOX MI_INSTR(0x16, 1)/* gen6+ */ +#define MI_SEMAPHORE_GLOBAL_GTT (1<<22) +#define MI_SEMAPHORE_UPDATE (1<<21) +#define MI_SEMAPHORE_COMPARE (1<<20) +#define MI_SEMAPHORE_REGISTER (1<<18) +#define MI_SEMAPHORE_SYNC_VR (0<<16)/* RCS wait for VCS (RVSYNC) */ +#define MI_SEMAPHORE_SYNC_VER (1<<16)/* RCS wait for VECS (RVESYNC) */ +#define MI_SEMAPHORE_SYNC_BR (2<<16)/* RCS wait for BCS (RBSYNC) */ +#define MI_SEMAPHORE_SYNC_BV (0<<16)/* VCS wait for BCS (VBSYNC) */ +#define MI_SEMAPHORE_SYNC_VEV (1<<16)/* VCS wait for VECS (VVESYNC) */ +#define MI_SEMAPHORE_SYNC_RV (2<<16)/* VCS wait for RCS (VRSYNC) */ +#define MI_SEMAPHORE_SYNC_RB (0<<16)/* BCS wait for RCS (BRSYNC) */ +#define MI_SEMAPHORE_SYNC_VEB (1<<16)/* BCS wait for VECS (BVESYNC) */ +#define MI_SEMAPHORE_SYNC_VB (2<<16)/* BCS wait for VCS (BVSYNC) */ +#define MI_SEMAPHORE_SYNC_BVE (0<<16)/* VECS wait for BCS (VEBSYNC) */ +#define MI_SEMAPHORE_SYNC_VVE (1<<16)/* VECS wait for VCS (VEVSYNC) */ +#define MI_SEMAPHORE_SYNC_RVE (2<<16)/* VECS wait for RCS (VERSYNC) */ +#define MI_SEMAPHORE_SYNC_INVALID (3<<16)#define MI_SET_CONTEXT MI_INSTR(0x18, 0)#define MI_MM_SPACE_GTT (1<<8)#define MI_MM_SPACE_PHYSICAL (0<<8)
@@ -235,7 +252,7 @@*/ #define MI_LOAD_REGISTER_IMM (x) MI_INSTR(0x22, 2*x-1)#define MI_STORE_REGISTER_MEM (x) MI_INSTR(0x24, 2*x-1) -#define MI_SRM_LRM_GLOBAL_GTT (1<<22) +#define MI_SRM_LRM_GLOBAL_GTT (1<<22)#define MI_FLUSH_DW MI_INSTR(0x26, 1)/* for GEN6 */ #define MI_FLUSH_DW_STORE_INDEX (1<<21)#define MI_INVALIDATE_TLB (1<<18)
@@ -246,30 +263,13 @@#define MI_BATCH_BUFFER MI_INSTR(0x30, 1)#define MI_BATCH_NON_SECURE (1)/* for snb/ivb/vlv this also means "batch in ppgtt" when ppgtt is enabled. */ -#define MI_BATCH_NON_SECURE_I965 (1<<8) +#define MI_BATCH_NON_SECURE_I965 (1<<8)#define MI_BATCH_PPGTT_HSW (1<<8) -#define MI_BATCH_NON_SECURE_HSW (1<<13) +#define MI_BATCH_NON_SECURE_HSW (1<<13)#define MI_BATCH_BUFFER_START MI_INSTR(0x31, 0)#define MI_BATCH_GTT (2<<6)/* aliased with (1<<7) on gen4 */ #define MI_BATCH_BUFFER_START_GEN8 MI_INSTR(0x31, 1) -#define MI_SEMAPHORE_MBOX MI_INSTR(0x16, 1)/* gen6+ */ -#define MI_SEMAPHORE_GLOBAL_GTT (1<<22) -#define MI_SEMAPHORE_UPDATE (1<<21) -#define MI_SEMAPHORE_COMPARE (1<<20) -#define MI_SEMAPHORE_REGISTER (1<<18) -#define MI_SEMAPHORE_SYNC_VR (0<<16)/* RCS wait for VCS (RVSYNC) */ -#define MI_SEMAPHORE_SYNC_VER (1<<16)/* RCS wait for VECS (RVESYNC) */ -#define MI_SEMAPHORE_SYNC_BR (2<<16)/* RCS wait for BCS (RBSYNC) */ -#define MI_SEMAPHORE_SYNC_BV (0<<16)/* VCS wait for BCS (VBSYNC) */ -#define MI_SEMAPHORE_SYNC_VEV (1<<16)/* VCS wait for VECS (VVESYNC) */ -#define MI_SEMAPHORE_SYNC_RV (2<<16)/* VCS wait for RCS (VRSYNC) */ -#define MI_SEMAPHORE_SYNC_RB (0<<16)/* BCS wait for RCS (BRSYNC) */ -#define MI_SEMAPHORE_SYNC_VEB (1<<16)/* BCS wait for VECS (BVESYNC) */ -#define MI_SEMAPHORE_SYNC_VB (2<<16)/* BCS wait for VCS (BVSYNC) */ -#define MI_SEMAPHORE_SYNC_BVE (0<<16)/* VECS wait for BCS (VEBSYNC) */ -#define MI_SEMAPHORE_SYNC_VVE (1<<16)/* VECS wait for VCS (VEVSYNC) */ -#define MI_SEMAPHORE_SYNC_RVE (2<<16)/* VECS wait for RCS (VERSYNC) */ -#define MI_SEMAPHORE_SYNC_INVALID (3<<16) +#define MI_PREDICATE_RESULT_2 (0x2214)#define LOWER_SLICE_ENABLED (1<<0)
Signature · 1 line
1.8.5.1
PATCH 2/17 drm/i915: Don't emit mbox updates without semaphores
In reply to Ben WidawskyAside from the fact that it leaves confusing dumps on error capture, it is entirely unnecessary, and potentially harmful in cases like BDW, where the instruction has changed.
In reality (seemingly), this will have no behavioral impact.
--- drivers/gpu/drm/i915/intel_ringbuffer.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/intel_ringbuffer.c +6 -5
@@ -663,14 +663,15 @@ gen6_add_request(struct intel_ring_buffer *ring)struct drm_device *dev = ring->dev;struct drm_i915_private *dev_priv = dev->dev_private;struct intel_ring_buffer *useless; -int i, ret; +int i, ret, num_dwords =4 ; - ret =intel_ring_begin (ring, ((I915_NUM_RINGS -1 ) * -MBOX_UPDATE_DWORDS ) + -4 ); +if (i915_semaphore_is_enabled (dev)) + num_dwords += ((I915_NUM_RINGS -1 ) *MBOX_UPDATE_DWORDS ); +#undef MBOX_UPDATE_DWORDS + + ret =intel_ring_begin (ring, num_dwords);if (ret)return ret; -#undef MBOX_UPDATE_DWORDSfor_each_ring (useless, dev_priv, i) {u32 mbox_reg = ring->signal_mbox[i];
Signature · 1 line
1.8.5.1
PATCH 3/17 drm/i915: Move semaphore specific ring members to struct
In reply to Ben WidawskyThis will be helpful in abstracting some of the code in preparation for gen8 semaphores.
--- drivers/gpu/drm/i915/i915_gem.c | 10 ++-- drivers/gpu/drm/i915/i915_gpu_error.c | 6 +-- drivers/gpu/drm/i915/intel_ringbuffer.c | 84 ++++++++++++++++----------------- drivers/gpu/drm/i915/intel_ringbuffer.h | 17 ++++--- 4 files changed, 60 insertions(+), 57 deletions(-)
drivers/gpu/drm/i915/i915_gem.c +5 -5
@@ -2062,8 +2062,8 @@ i915_gem_init_seqno(struct drm_device *dev, u32 seqno)for_each_ring (ring, dev_priv, i) {intel_ring_init_seqno (ring, seqno); -for (j =0 ; j <ARRAY_SIZE (ring->sync_seqno); j++) - ring->sync_seqno[j] =0 ; +for (j =0 ; j <ARRAY_SIZE (ring->semaphore.sync_seqno); j++) + ring->semaphore.sync_seqno[j] =0 ; }return 0 ;
@@ -2681,7 +2681,7 @@ i915_gem_object_sync(struct drm_i915_gem_object *obj, idx =intel_ring_sync_index (from, to); seqno = obj->last_read_seqno; -if (seqno <= from->sync_seqno[idx]) +if (seqno <= from->semaphore.sync_seqno[idx])return 0 ; ret =i915_gem_check_olr (obj->ring, seqno);
@@ -2689,13 +2689,13 @@ i915_gem_object_sync(struct drm_i915_gem_object *obj,return ret;trace_i915_gem_ring_sync_to (from, to, seqno); - ret = to->sync_to (to, from, seqno); + ret = to->semaphore.sync_to (to, from, seqno);if (!ret)/* We use last_read_seqno because sync_to() * might have just caused seqno wrap under * the radar. */ - from->sync_seqno[idx] = obj->last_read_seqno; + from->semaphore.sync_seqno[idx] = obj->last_read_seqno;return ret; }
drivers/gpu/drm/i915/i915_gpu_error.c +3 -3
@@ -708,14 +708,14 @@ static void i915_record_ring_state(struct drm_device *dev, = I915_READ(RING_SYNC_0(ring->mmio_base)); error->semaphore_mboxes[ring->id][1 ] =I915_READ (RING_SYNC_1 (ring->mmio_base)); - error->semaphore_seqno[ring->id][0 ] = ring->sync_seqno[0 ]; - error->semaphore_seqno[ring->id][1 ] = ring->sync_seqno[1 ]; + error->semaphore_seqno[ring->id][0 ] = ring->semaphore.sync_seqno[0 ]; + error->semaphore_seqno[ring->id][1 ] = ring->semaphore.sync_seqno[1 ]; }if (HAS_VEBOX (dev)) { error->semaphore_mboxes[ring->id][2 ] =I915_READ (RING_SYNC_2 (ring->mmio_base)); - error->semaphore_seqno[ring->id][2 ] = ring->sync_seqno[2 ]; + error->semaphore_seqno[ring->id][2 ] = ring->semaphore.sync_seqno[2 ]; }if (INTEL_INFO (dev)->gen >=4 ) {
drivers/gpu/drm/i915/intel_ringbuffer.c +42 -42
132 lines not on this page · raw message
drivers/gpu/drm/i915/intel_ringbuffer.h +10 -7
@@ -83,7 +83,6 @@ struct intel_ring_buffer {unsigned irq_refcount;/* protected by dev_priv->irq_lock */ u32 irq_enable_mask;/* bitmask to enable ring interrupt */ u32 trace_irq_seqno; -u32 sync_seqno[I915_NUM_RINGS -1 ];bool __must_check (*irq_get)(struct intel_ring_buffer *ring);void (*irq_put)(struct intel_ring_buffer *ring);
@@ -111,14 +110,18 @@ struct intel_ring_buffer {#define I915_DISPATCH_SECURE 0x1#define I915_DISPATCH_PINNED 0x2void (*cleanup)(struct intel_ring_buffer *ring); -int (*sync_to)(struct intel_ring_buffer *ring, + +struct { +u32 sync_seqno[I915_NUM_RINGS -1 ]; +/* AKA wait() */ +int (*sync_to)(struct intel_ring_buffer *ring,struct intel_ring_buffer *to,u32 seqno); - -/* our mbox written by others */ -u32 semaphore_register[I915_NUM_RINGS ]; -/* mboxes this ring signals to */ -u32 signal_mbox[I915_NUM_RINGS ]; +/* our mbox written by others */ +u32 mbox[I915_NUM_RINGS ]; +/* mboxes this ring signals to */ +u32 signal_mbox[I915_NUM_RINGS ]; + } semaphore;/** * List of objects currently involved in rendering from the
Signature · 1 line
1.8.5.1
PATCH 4/17 drm/i915: Virtualize the ringbuffer signal func
In reply to Ben WidawskyThis abstraction again is in preparation for gen8. Gen8 will bring new semantics for doing this operation.
While here, make the writes of MI_NOOPs explicit for non-existent rings. This should have been implicit before.
NOTE: This is going to be removed in a few patches.
--- drivers/gpu/drm/i915/intel_ringbuffer.c | 40 ++++++++++++++++++++------------- drivers/gpu/drm/i915/intel_ringbuffer.h | 2 ++ 2 files changed, 27 insertions(+), 15 deletions(-)
drivers/gpu/drm/i915/intel_ringbuffer.c +25 -15
@@ -632,20 +632,32 @@ static void render_ring_cleanup(struct intel_ring_buffer *ring) ring->scratch.obj =NULL ; } -static void -update_mboxes (struct intel_ring_buffer *ring, -u32 mmio_offset) +static void gen6_signal (struct intel_ring_buffer *signaller) { +struct drm_i915_private *dev_priv = signaller->dev->dev_private; +struct intel_ring_buffer *useless; +int i; +/* NB: In order to be able to do semaphore MBOX updates for varying number * of rings, it's easiest if we round up each individual update to a * multiple of 2 (since ring updates must always be a multiple of 2) * even though the actual update only requires 3 dwords. */ #define MBOX_UPDATE_DWORDS 4 -intel_ring_emit (ring,MI_LOAD_REGISTER_IMM (1 )); -intel_ring_emit (ring, mmio_offset); -intel_ring_emit (ring, ring->outstanding_lazy_seqno); -intel_ring_emit (ring,MI_NOOP ); +for_each_ring (useless, dev_priv, i) { +u32 mbox_reg = signaller->semaphore.signal_mbox[i]; +if (mbox_reg !=GEN6_NOSYNC ) { +intel_ring_emit (signaller,MI_LOAD_REGISTER_IMM (1 )); +intel_ring_emit (signaller, mbox_reg); +intel_ring_emit (signaller, signaller->outstanding_lazy_seqno); +intel_ring_emit (signaller,MI_NOOP ); + }else { +intel_ring_emit (signaller,MI_NOOP ); +intel_ring_emit (signaller,MI_NOOP ); +intel_ring_emit (signaller,MI_NOOP ); +intel_ring_emit (signaller,MI_NOOP ); + } + } }/**
@@ -661,9 +673,7 @@ static int gen6_add_request(struct intel_ring_buffer *ring) {struct drm_device *dev = ring->dev; -struct drm_i915_private *dev_priv = dev->dev_private; -struct intel_ring_buffer *useless; -int i, ret, num_dwords =4 ; +int ret, num_dwords =4 ;if (i915_semaphore_is_enabled (dev)) num_dwords += ((I915_NUM_RINGS -1 ) *MBOX_UPDATE_DWORDS );
@@ -673,11 +683,7 @@ gen6_add_request(struct intel_ring_buffer *ring)if (ret)return ret; -for_each_ring (useless, dev_priv, i) { -u32 mbox_reg = ring->semaphore.signal_mbox[i]; -if (mbox_reg !=GEN6_NOSYNC ) -update_mboxes (ring, mbox_reg); - } + ring->semaphore.signal (ring);intel_ring_emit (ring,MI_STORE_DWORD_INDEX );intel_ring_emit (ring,I915_GEM_HWS_INDEX <<MI_STORE_DWORD_INDEX_SHIFT );
@@ -1866,6 +1872,7 @@ int intel_init_render_ring_buffer(struct drm_device *dev) ring->get_seqno = gen6_ring_get_seqno; ring->set_seqno = ring_set_seqno; ring->semaphore.sync_to = gen6_ring_sync; + ring->semaphore.signal = gen6_signal; ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_INVALID ; ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_RV ; ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_RB ;
@@ -2042,6 +2049,7 @@ int intel_init_bsd_ring_buffer(struct drm_device *dev) gen6_ring_dispatch_execbuffer; } ring->semaphore.sync_to = gen6_ring_sync; + ring->semaphore.signal = gen6_signal; ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_VR ; ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_INVALID ; ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_VB ;
@@ -2099,6 +2107,7 @@ int intel_init_blt_ring_buffer(struct drm_device *dev) ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer; } ring->semaphore.sync_to = gen6_ring_sync; + ring->semaphore.signal = gen6_signal; ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_BR ; ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_BV ; ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_INVALID ;
@@ -2140,6 +2149,7 @@ int intel_init_vebox_ring_buffer(struct drm_device *dev) ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer; } ring->semaphore.sync_to = gen6_ring_sync; + ring->semaphore.signal = gen6_signal; ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_VER ; ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_VEV ; ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_VEB ;
drivers/gpu/drm/i915/intel_ringbuffer.h +2 -0
@@ -121,6 +121,8 @@ struct intel_ring_buffer {u32 mbox[I915_NUM_RINGS ];/* mboxes this ring signals to */ u32 signal_mbox[I915_NUM_RINGS ]; + +void (*signal)(struct intel_ring_buffer *signaller); } semaphore;/**
Signature · 1 line
1.8.5.1
PATCH 5/17 drm/i915: Move ring_begin to signal()
In reply to Ben WidawskyAdd_request has always contained both the semaphore mailbox updates as well as the breadcrumb writes. Since the semaphore signal is the one which actually knows about the number of dwords it needs to emit to the ring, we move the ring_begin to that function. This allows us to remove the hideously shared #define
On a related not, gen8 will use a different number of dwords for semaphores, but not for add request.
--- drivers/gpu/drm/i915/intel_ringbuffer.c | 40 +++++++++++++++++++-------------- drivers/gpu/drm/i915/intel_ringbuffer.h | 2 +- 2 files changed, 24 insertions(+), 18 deletions(-)
drivers/gpu/drm/i915/intel_ringbuffer.c +23 -17
@@ -632,18 +632,27 @@ static void render_ring_cleanup(struct intel_ring_buffer *ring) ring->scratch.obj =NULL ; } -static void gen6_signal (struct intel_ring_buffer *signaller) +static int gen6_signal (struct intel_ring_buffer *signaller) { -struct drm_i915_private *dev_priv = signaller->dev->dev_private; +struct drm_device *dev = signaller->dev; +struct drm_i915_private *dev_priv = dev->dev_private;struct intel_ring_buffer *useless; -int i; +int i, ret, num_dwords =4 ; -/* NB: In order to be able to do semaphore MBOX updates for varying number -* of rings, it's easiest if we round up each individual update to a -* multiple of 2 (since ring updates must always be a multiple of 2) -* even though the actual update only requires 3 dwords. -*/ +/* NB: In order to be able to do semaphore MBOX updates for varying +* number of rings, it's easiest if we round up each individual update +* to a multiple of 2 (since ring updates must always be a multiple of +* 2) even though the actual update only requires 3 dwords. +*/ #define MBOX_UPDATE_DWORDS 4 +if (i915_semaphore_is_enabled (dev)) + num_dwords += ((I915_NUM_RINGS -1 ) *MBOX_UPDATE_DWORDS ); + + ret =intel_ring_begin (signaller, num_dwords); +if (ret) +return ret; +#undef MBOX_UPDATE_DWORDS +for_each_ring (useless, dev_priv, i) {u32 mbox_reg = signaller->semaphore.signal_mbox[i];if (mbox_reg !=GEN6_NOSYNC ) {
@@ -658,6 +667,8 @@ static void gen6_signal(struct intel_ring_buffer *signaller)intel_ring_emit (signaller,MI_NOOP ); } } + +return 0 ; }/**
@@ -672,19 +683,14 @@ static void gen6_signal(struct intel_ring_buffer *signaller)static int gen6_add_request (struct intel_ring_buffer *ring) { -struct drm_device *dev = ring->dev; -int ret, num_dwords =4 ; - -if (i915_semaphore_is_enabled (dev)) - num_dwords += ((I915_NUM_RINGS -1 ) *MBOX_UPDATE_DWORDS ); -#undef MBOX_UPDATE_DWORDS +int ret; - ret =intel_ring_begin (ring, num_dwords); +/* XXX: Signal will do ring begin for us. It assumes add_request always +* needs 4 dwords */ + ret = ring->semaphore.signal (ring);if (ret)return ret; - ring->semaphore.signal (ring); -intel_ring_emit (ring,MI_STORE_DWORD_INDEX );intel_ring_emit (ring,I915_GEM_HWS_INDEX <<MI_STORE_DWORD_INDEX_SHIFT );intel_ring_emit (ring, ring->outstanding_lazy_seqno);
drivers/gpu/drm/i915/intel_ringbuffer.h +1 -1
@@ -122,7 +122,7 @@ struct intel_ring_buffer {/* mboxes this ring signals to */ u32 signal_mbox[I915_NUM_RINGS ]; -void (*signal)(struct intel_ring_buffer *signaller); +int (*signal)(struct intel_ring_buffer *signaller); } semaphore;/**
Signature · 1 line
1.8.5.1
Re: [PATCH 05/17] drm/i915: Move ring_begin to signal()
Quoted 5 lines · Ben Widawsky
Add_requesthas always contained both the semaphore mailbox updates as well as the breadcrumb writes. Since the semaphore signal is the one which actually knows about the number of dwords it needs to emit to the ring, we move thering_beginto that function. This allows us to remove the hideously shared #define
We can now just split it up and use two intel_ring_begin(). And there is no reason not to pack the semaphore commands tightly.
-Chris
Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre
Re: [PATCH 05/17] drm/i915: Move ring_begin to signal()
Quoted 10 lines · Chris Wilson
Quoted 5 lines · Ben Widawsky
Add_requesthas always contained both the semaphore mailbox updates as well as the breadcrumb writes. Since the semaphore signal is the one which actually knows about the number of dwords it needs to emit to the ring, we move thering_beginto that function. This allows us to remove the hideously shared #defineWe can now just split it up and use two
intel_ring_begin(). And there is no reason not to pack the semaphore commands tightly.
-Chris
Tight packing comes in a later patch.
I thought about multi ring begins, except I couldn't figure out a way to easily back out if a later one fails. It would be a shame to emit some/none of the semaphore updates, and then success on the breadcrumb/MI_USER_INTERRUPT (or vice versa).
Signature · 1 line
Ben Widawsky, Intel Open Source Technology Center
PATCH v2 5/17 drm/i915: Move ring_begin to signal()
In reply to Chris WilsonAdd_request has always contained both the semaphore mailbox updates as well as the breadcrumb writes. Since the semaphore signal is the one which actually knows about the number of dwords it needs to emit to the ring, we move the ring_begin to that function. This allows us to remove the hideously shared #define
On a related not, gen8 will use a different number of dwords for semaphores, but not for add request.
v2: Make number of dwords an explicit part of signalling (via function argument). (Chris)
--- drivers/gpu/drm/i915/intel_ringbuffer.c | 39 +++++++++++++++++++-------------- drivers/gpu/drm/i915/intel_ringbuffer.h | 4 +++- 2 files changed, 25 insertions(+), 18 deletions(-)
drivers/gpu/drm/i915/intel_ringbuffer.c +22 -17
@@ -632,18 +632,28 @@ static void render_ring_cleanup(struct intel_ring_buffer *ring) ring->scratch.obj =NULL ; } -static void gen6_signal (struct intel_ring_buffer *signaller) +static int gen6_signal (struct intel_ring_buffer *signaller, +unsigned int num_dwords) { -struct drm_i915_private *dev_priv = signaller->dev->dev_private; +struct drm_device *dev = signaller->dev; +struct drm_i915_private *dev_priv = dev->dev_private;struct intel_ring_buffer *useless; -int i; +int i, ret; -/* NB: In order to be able to do semaphore MBOX updates for varying number -* of rings, it's easiest if we round up each individual update to a -* multiple of 2 (since ring updates must always be a multiple of 2) -* even though the actual update only requires 3 dwords. -*/ +/* NB: In order to be able to do semaphore MBOX updates for varying +* number of rings, it's easiest if we round up each individual update +* to a multiple of 2 (since ring updates must always be a multiple of +* 2) even though the actual update only requires 3 dwords. +*/ #define MBOX_UPDATE_DWORDS 4 +if (i915_semaphore_is_enabled (dev)) + num_dwords += ((I915_NUM_RINGS -1 ) *MBOX_UPDATE_DWORDS ); + + ret =intel_ring_begin (signaller, num_dwords); +if (ret) +return ret; +#undef MBOX_UPDATE_DWORDS +for_each_ring (useless, dev_priv, i) {u32 mbox_reg = signaller->semaphore.signal_mbox[i];if (mbox_reg !=GEN6_NOSYNC ) {
@@ -658,6 +668,8 @@ static void gen6_signal(struct intel_ring_buffer *signaller)intel_ring_emit (signaller,MI_NOOP ); } } + +return 0 ; }/**
@@ -672,19 +684,12 @@ static void gen6_signal(struct intel_ring_buffer *signaller)static int gen6_add_request (struct intel_ring_buffer *ring) { -struct drm_device *dev = ring->dev; -int ret, num_dwords =4 ; - -if (i915_semaphore_is_enabled (dev)) - num_dwords += ((I915_NUM_RINGS -1 ) *MBOX_UPDATE_DWORDS ); -#undef MBOX_UPDATE_DWORDS +int ret; - ret =intel_ring_begin (ring, num_dwords); + ret = ring->semaphore.signal (ring,4 );if (ret)return ret; - ring->semaphore.signal (ring); -intel_ring_emit (ring,MI_STORE_DWORD_INDEX );intel_ring_emit (ring,I915_GEM_HWS_INDEX <<MI_STORE_DWORD_INDEX_SHIFT );intel_ring_emit (ring, ring->outstanding_lazy_seqno);
drivers/gpu/drm/i915/intel_ringbuffer.h +3 -1
@@ -122,7 +122,9 @@ struct intel_ring_buffer {/* mboxes this ring signals to */ u32 signal_mbox[I915_NUM_RINGS ]; -void (*signal)(struct intel_ring_buffer *signaller); +/* num_dwords is space the caller will need for atomic update */ +int (*signal)(struct intel_ring_buffer *signaller, +unsigned int num_dwords); } semaphore;/**
Signature · 1 line
1.8.5.1
PATCH 6/17 drm/i915: Make semaphore updates more precise
In reply to Ben WidawskyWith the ring mask we now have an easy way to know the number of rings in the system, and therefore can accurately predict the number of dwords to emit for semaphore signalling. This was not possible (easily) previously.
There should be no functional impact, simply fewer instructions emitted.
While we're here, simply do the round up to 2 instead of the fancier rounding we did before, which rounding up per mbox, ie 4.
--- drivers/gpu/drm/i915/intel_ringbuffer.c | 43 +++++++++++++++++---------------- 1 file changed, 22 insertions(+), 21 deletions(-)
drivers/gpu/drm/i915/intel_ringbuffer.c +22 -21
@@ -634,24 +634,20 @@ static void render_ring_cleanup(struct intel_ring_buffer *ring)static int gen6_signal (struct intel_ring_buffer *signaller) { +#define MBOX_UPDATE_DWORDS 4struct drm_device *dev = signaller->dev;struct drm_i915_private *dev_priv = dev->dev_private;struct intel_ring_buffer *useless; -int i, ret, num_dwords =4 ; +int i, ret, num_rings, num_dwords; -/* NB: In order to be able to do semaphore MBOX updates for varying -* number of rings, it's easiest if we round up each individual update -* to a multiple of 2 (since ring updates must always be a multiple of -* 2) even though the actual update only requires 3 dwords. -*/ -#define MBOX_UPDATE_DWORDS 4 -if (i915_semaphore_is_enabled (dev)) - num_dwords += ((I915_NUM_RINGS -1 ) *MBOX_UPDATE_DWORDS ); + num_rings =hweight_long (INTEL_INFO (dev)->ring_mask); + num_dwords =round_up ((num_rings-1 ) *MBOX_UPDATE_DWORDS ,2 ); +#undef MBOX_UPDATE_DWORDS - ret =intel_ring_begin (signaller, num_dwords); +/* XXX: + 4 for the caller */ + ret =intel_ring_begin (signaller, num_dwords +4 );if (ret)return ret; -#undef MBOX_UPDATE_DWORDSfor_each_ring (useless, dev_priv, i) {u32 mbox_reg = signaller->semaphore.signal_mbox[i];
@@ -660,14 +656,11 @@ static int gen6_signal(struct intel_ring_buffer *signaller)intel_ring_emit (signaller, mbox_reg);intel_ring_emit (signaller, signaller->outstanding_lazy_seqno);intel_ring_emit (signaller,MI_NOOP ); - }else { -intel_ring_emit (signaller,MI_NOOP ); -intel_ring_emit (signaller,MI_NOOP ); -intel_ring_emit (signaller,MI_NOOP ); -intel_ring_emit (signaller,MI_NOOP ); } } +WARN_ON (i != num_rings); +return 0 ; }
@@ -687,7 +680,11 @@ gen6_add_request(struct intel_ring_buffer *ring)/* XXX: Signal will do ring begin for us. It assumes add_request always * needs 4 dwords */ - ret = ring->semaphore.signal (ring); +if (ring->semaphore.signal) + ret = ring->semaphore.signal (ring); +else + ret =intel_ring_begin (ring,4 ); +if (ret)return ret;
@@ -1878,7 +1875,8 @@ int intel_init_render_ring_buffer(struct drm_device *dev) ring->get_seqno = gen6_ring_get_seqno; ring->set_seqno = ring_set_seqno; ring->semaphore.sync_to = gen6_ring_sync; - ring->semaphore.signal = gen6_signal; +if (i915_semaphore_is_enabled (dev)) + ring->semaphore.signal = gen6_signal; ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_INVALID ; ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_RV ; ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_RB ;
@@ -2055,7 +2053,8 @@ int intel_init_bsd_ring_buffer(struct drm_device *dev) gen6_ring_dispatch_execbuffer; } ring->semaphore.sync_to = gen6_ring_sync; - ring->semaphore.signal = gen6_signal; +if (i915_semaphore_is_enabled (dev)) + ring->semaphore.signal = gen6_signal; ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_VR ; ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_INVALID ; ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_VB ;
@@ -2113,7 +2112,8 @@ int intel_init_blt_ring_buffer(struct drm_device *dev) ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer; } ring->semaphore.sync_to = gen6_ring_sync; - ring->semaphore.signal = gen6_signal; +if (i915_semaphore_is_enabled (dev)) + ring->semaphore.signal = gen6_signal; ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_BR ; ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_BV ; ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_INVALID ;
@@ -2155,7 +2155,8 @@ int intel_init_vebox_ring_buffer(struct drm_device *dev) ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer; } ring->semaphore.sync_to = gen6_ring_sync; - ring->semaphore.signal = gen6_signal; +if (i915_semaphore_is_enabled (dev)) + ring->semaphore.signal = gen6_signal; ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_VER ; ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_VEV ; ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_VEB ;
Signature · 1 line
1.8.5.1
PATCH 7/17 drm/i915: gen specific semaphore info
In reply to Ben WidawskyGen8 will do things a bit differently. As such split out the semaphore member initialization, and use proper NOPfor gen8, since the old commands don't work.
--- drivers/gpu/drm/i915/intel_ringbuffer.c | 134 ++++++++++++++++++++++---------- 1 file changed, 92 insertions(+), 42 deletions(-)
drivers/gpu/drm/i915/intel_ringbuffer.c +92 -42
@@ -1858,19 +1858,33 @@ int intel_init_render_ring_buffer(struct drm_device *dev) ring->id =RCS ; ring->mmio_base =RENDER_RING_BASE ; -if (INTEL_INFO (dev)->gen >=6 ) { +if (INTEL_INFO (dev)->gen >=8 ) { + ring->add_request = gen6_add_request; + ring->flush = gen8_render_ring_flush; + ring->irq_get = gen8_ring_get_irq; + ring->irq_put = gen8_ring_put_irq; + ring->irq_enable_mask =GT_RENDER_USER_INTERRUPT ; + ring->get_seqno = gen6_ring_get_seqno; + ring->set_seqno = ring_set_seqno; + ring->semaphore.sync_to = gen6_ring_sync; +if (i915_semaphore_is_enabled (dev)) + ring->semaphore.signal = gen6_signal; + ring->semaphore.signal = gen6_signal; + ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[VECS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.signal_mbox[RCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[VCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[BCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[VECS ] =GEN6_NOSYNC ; + }else if (INTEL_INFO (dev)->gen >=6 ) { ring->add_request = gen6_add_request; ring->flush = gen7_render_ring_flush;if (INTEL_INFO (dev)->gen ==6 ) ring->flush = gen6_render_ring_flush; -if (INTEL_INFO (dev)->gen >=8 ) { - ring->flush = gen8_render_ring_flush; - ring->irq_get = gen8_ring_get_irq; - ring->irq_put = gen8_ring_put_irq; - }else { - ring->irq_get = gen6_ring_get_irq; - ring->irq_put = gen6_ring_put_irq; - } + ring->irq_get = gen6_ring_get_irq; + ring->irq_put = gen6_ring_put_irq; ring->irq_enable_mask =GT_RENDER_USER_INTERRUPT ; ring->get_seqno = gen6_ring_get_seqno; ring->set_seqno = ring_set_seqno;
@@ -1912,6 +1926,7 @@ int intel_init_render_ring_buffer(struct drm_device *dev) ring->irq_enable_mask =I915_USER_INTERRUPT ; } ring->write_tail = ring_write_tail; +if (IS_HASWELL (dev)) ring->dispatch_execbuffer = hsw_ring_dispatch_execbuffer;else if (IS_GEN8 (dev))
@@ -2045,24 +2060,35 @@ int intel_init_bsd_ring_buffer(struct drm_device *dev) ring->irq_put = gen8_ring_put_irq; ring->dispatch_execbuffer = gen8_ring_dispatch_execbuffer; + ring->semaphore.sync_to = gen6_ring_sync; +if (i915_semaphore_is_enabled (dev)) + ring->semaphore.signal = gen6_signal; + ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[VECS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.signal_mbox[RCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[VCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[BCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[VECS ] =GEN6_NOSYNC ; }else { ring->irq_enable_mask =GT_BSD_USER_INTERRUPT ; ring->irq_get = gen6_ring_get_irq; ring->irq_put = gen6_ring_put_irq; ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer; + ring->semaphore.sync_to = gen6_ring_sync; +if (i915_semaphore_is_enabled (dev)) + ring->semaphore.signal = gen6_signal; + ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_VR ; + ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_VB ; + ring->semaphore.mbox[VECS ] =MI_SEMAPHORE_SYNC_VVE ; + ring->semaphore.signal_mbox[RCS ] =GEN6_RVSYNC ; + ring->semaphore.signal_mbox[VCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[BCS ] =GEN6_BVSYNC ; + ring->semaphore.signal_mbox[VECS ] =GEN6_VEVSYNC ; } - ring->semaphore.sync_to = gen6_ring_sync; -if (i915_semaphore_is_enabled (dev)) - ring->semaphore.signal = gen6_signal; - ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_VR ; - ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_INVALID ; - ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_VB ; - ring->semaphore.mbox[VECS ] =MI_SEMAPHORE_SYNC_VVE ; - ring->semaphore.signal_mbox[RCS ] =GEN6_RVSYNC ; - ring->semaphore.signal_mbox[VCS ] =GEN6_NOSYNC ; - ring->semaphore.signal_mbox[BCS ] =GEN6_BVSYNC ; - ring->semaphore.signal_mbox[VECS ] =GEN6_VEVSYNC ; }else { ring->mmio_base =BSD_RING_BASE ; ring->flush = bsd_ring_flush;
@@ -2105,23 +2131,35 @@ int intel_init_blt_ring_buffer(struct drm_device *dev) ring->irq_get = gen8_ring_get_irq; ring->irq_put = gen8_ring_put_irq; ring->dispatch_execbuffer = gen8_ring_dispatch_execbuffer; + ring->semaphore.sync_to = gen6_ring_sync; +if (i915_semaphore_is_enabled (dev)) + ring->semaphore.signal = gen6_signal; + ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[VECS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.signal_mbox[RCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[VCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[BCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[VECS ] =GEN6_NOSYNC ; }else { ring->irq_enable_mask =GT_BLT_USER_INTERRUPT ; ring->irq_get = gen6_ring_get_irq; ring->irq_put = gen6_ring_put_irq; ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer; + ring->semaphore.sync_to = gen6_ring_sync; +if (i915_semaphore_is_enabled (dev)) + ring->semaphore.signal = gen6_signal; + ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_BR ; + ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_BV ; + ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[VECS ] =MI_SEMAPHORE_SYNC_BVE ; + ring->semaphore.signal_mbox[RCS ] =GEN6_RBSYNC ; + ring->semaphore.signal_mbox[VCS ] =GEN6_VBSYNC ; + ring->semaphore.signal_mbox[BCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[VECS ] =GEN6_VEBSYNC ; } - ring->semaphore.sync_to = gen6_ring_sync; -if (i915_semaphore_is_enabled (dev)) - ring->semaphore.signal = gen6_signal; - ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_BR ; - ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_BV ; - ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_INVALID ; - ring->semaphore.mbox[VECS ] =MI_SEMAPHORE_SYNC_BVE ; - ring->semaphore.signal_mbox[RCS ] =GEN6_RBSYNC ; - ring->semaphore.signal_mbox[VCS ] =GEN6_VBSYNC ; - ring->semaphore.signal_mbox[BCS ] =GEN6_NOSYNC ; - ring->semaphore.signal_mbox[VECS ] =GEN6_VEBSYNC ; + ring->init = init_ring_common;return intel_init_ring_buffer (dev, ring);
@@ -2148,23 +2186,35 @@ int intel_init_vebox_ring_buffer(struct drm_device *dev) ring->irq_get = gen8_ring_get_irq; ring->irq_put = gen8_ring_put_irq; ring->dispatch_execbuffer = gen8_ring_dispatch_execbuffer; + ring->semaphore.sync_to = gen6_ring_sync; +if (i915_semaphore_is_enabled (dev)) + ring->semaphore.signal = gen6_signal; + ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[VECS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.signal_mbox[RCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[VCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[BCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[VECS ] =GEN6_NOSYNC ; }else { ring->irq_enable_mask =PM_VEBOX_USER_INTERRUPT ; ring->irq_get = hsw_vebox_get_irq; ring->irq_put = hsw_vebox_put_irq; + ring->semaphore.sync_to = gen6_ring_sync; +if (i915_semaphore_is_enabled (dev)) + ring->semaphore.signal = gen6_signal; + ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_VER ; + ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_VEV ; + ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_VEB ; + ring->semaphore.mbox[VECS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.signal_mbox[RCS ] =GEN6_RVESYNC ; + ring->semaphore.signal_mbox[VCS ] =GEN6_VVESYNC ; + ring->semaphore.signal_mbox[BCS ] =GEN6_BVESYNC ; + ring->semaphore.signal_mbox[VECS ] =GEN6_NOSYNC ; ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer; } - ring->semaphore.sync_to = gen6_ring_sync; -if (i915_semaphore_is_enabled (dev)) - ring->semaphore.signal = gen6_signal; - ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_VER ; - ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_VEV ; - ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_VEB ; - ring->semaphore.mbox[VECS ] =MI_SEMAPHORE_SYNC_INVALID ; - ring->semaphore.signal_mbox[RCS ] =GEN6_RVESYNC ; - ring->semaphore.signal_mbox[VCS ] =GEN6_VVESYNC ; - ring->semaphore.signal_mbox[BCS ] =GEN6_BVESYNC ; - ring->semaphore.signal_mbox[VECS ] =GEN6_NOSYNC ; + ring->init = init_ring_common;return intel_init_ring_buffer (dev, ring);
Signature · 1 line
1.8.5.1
Re: [PATCH 07/17] drm/i915: gen specific semaphore info
Quoted 3 lines · Ben Widawsky
Gen8 will do things a bit differently. As such split out the semaphore member initialization, and use proper NOPfor gen8, since the old commands don't work.
This is the wrong commit message for this patch. The original commit only moved the signalling. I have this commit msg fixed locally.
Signature · 1 line
Ben Widawsky, Intel Open Source Technology Center
PATCH v2 7/17 drm/i915: gen specific ring init
In reply to Ben WidawskyGen8 has already had some differentiation with how it handles rings. Semaphores bring yet more differences, and now is as good a time as any to do the split.
Also, since gen8 doesn't actually use semaphores up until this point, put the proper "NULL" values in for the mbox info.
v2: v1 had a stale commit message
--- drivers/gpu/drm/i915/intel_ringbuffer.c | 134 ++++++++++++++++++++++---------- 1 file changed, 92 insertions(+), 42 deletions(-)
drivers/gpu/drm/i915/intel_ringbuffer.c +92 -42
@@ -1858,19 +1858,33 @@ int intel_init_render_ring_buffer(struct drm_device *dev) ring->id =RCS ; ring->mmio_base =RENDER_RING_BASE ; -if (INTEL_INFO (dev)->gen >=6 ) { +if (INTEL_INFO (dev)->gen >=8 ) { + ring->add_request = gen6_add_request; + ring->flush = gen8_render_ring_flush; + ring->irq_get = gen8_ring_get_irq; + ring->irq_put = gen8_ring_put_irq; + ring->irq_enable_mask =GT_RENDER_USER_INTERRUPT ; + ring->get_seqno = gen6_ring_get_seqno; + ring->set_seqno = ring_set_seqno; + ring->semaphore.sync_to = gen6_ring_sync; +if (i915_semaphore_is_enabled (dev)) + ring->semaphore.signal = gen6_signal; + ring->semaphore.signal = gen6_signal; + ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[VECS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.signal_mbox[RCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[VCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[BCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[VECS ] =GEN6_NOSYNC ; + }else if (INTEL_INFO (dev)->gen >=6 ) { ring->add_request = gen6_add_request; ring->flush = gen7_render_ring_flush;if (INTEL_INFO (dev)->gen ==6 ) ring->flush = gen6_render_ring_flush; -if (INTEL_INFO (dev)->gen >=8 ) { - ring->flush = gen8_render_ring_flush; - ring->irq_get = gen8_ring_get_irq; - ring->irq_put = gen8_ring_put_irq; - }else { - ring->irq_get = gen6_ring_get_irq; - ring->irq_put = gen6_ring_put_irq; - } + ring->irq_get = gen6_ring_get_irq; + ring->irq_put = gen6_ring_put_irq; ring->irq_enable_mask =GT_RENDER_USER_INTERRUPT ; ring->get_seqno = gen6_ring_get_seqno; ring->set_seqno = ring_set_seqno;
@@ -1912,6 +1926,7 @@ int intel_init_render_ring_buffer(struct drm_device *dev) ring->irq_enable_mask =I915_USER_INTERRUPT ; } ring->write_tail = ring_write_tail; +if (IS_HASWELL (dev)) ring->dispatch_execbuffer = hsw_ring_dispatch_execbuffer;else if (IS_GEN8 (dev))
@@ -2045,24 +2060,35 @@ int intel_init_bsd_ring_buffer(struct drm_device *dev) ring->irq_put = gen8_ring_put_irq; ring->dispatch_execbuffer = gen8_ring_dispatch_execbuffer; + ring->semaphore.sync_to = gen6_ring_sync; +if (i915_semaphore_is_enabled (dev)) + ring->semaphore.signal = gen6_signal; + ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[VECS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.signal_mbox[RCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[VCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[BCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[VECS ] =GEN6_NOSYNC ; }else { ring->irq_enable_mask =GT_BSD_USER_INTERRUPT ; ring->irq_get = gen6_ring_get_irq; ring->irq_put = gen6_ring_put_irq; ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer; + ring->semaphore.sync_to = gen6_ring_sync; +if (i915_semaphore_is_enabled (dev)) + ring->semaphore.signal = gen6_signal; + ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_VR ; + ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_VB ; + ring->semaphore.mbox[VECS ] =MI_SEMAPHORE_SYNC_VVE ; + ring->semaphore.signal_mbox[RCS ] =GEN6_RVSYNC ; + ring->semaphore.signal_mbox[VCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[BCS ] =GEN6_BVSYNC ; + ring->semaphore.signal_mbox[VECS ] =GEN6_VEVSYNC ; } - ring->semaphore.sync_to = gen6_ring_sync; -if (i915_semaphore_is_enabled (dev)) - ring->semaphore.signal = gen6_signal; - ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_VR ; - ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_INVALID ; - ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_VB ; - ring->semaphore.mbox[VECS ] =MI_SEMAPHORE_SYNC_VVE ; - ring->semaphore.signal_mbox[RCS ] =GEN6_RVSYNC ; - ring->semaphore.signal_mbox[VCS ] =GEN6_NOSYNC ; - ring->semaphore.signal_mbox[BCS ] =GEN6_BVSYNC ; - ring->semaphore.signal_mbox[VECS ] =GEN6_VEVSYNC ; }else { ring->mmio_base =BSD_RING_BASE ; ring->flush = bsd_ring_flush;
@@ -2105,23 +2131,35 @@ int intel_init_blt_ring_buffer(struct drm_device *dev) ring->irq_get = gen8_ring_get_irq; ring->irq_put = gen8_ring_put_irq; ring->dispatch_execbuffer = gen8_ring_dispatch_execbuffer; + ring->semaphore.sync_to = gen6_ring_sync; +if (i915_semaphore_is_enabled (dev)) + ring->semaphore.signal = gen6_signal; + ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[VECS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.signal_mbox[RCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[VCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[BCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[VECS ] =GEN6_NOSYNC ; }else { ring->irq_enable_mask =GT_BLT_USER_INTERRUPT ; ring->irq_get = gen6_ring_get_irq; ring->irq_put = gen6_ring_put_irq; ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer; + ring->semaphore.sync_to = gen6_ring_sync; +if (i915_semaphore_is_enabled (dev)) + ring->semaphore.signal = gen6_signal; + ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_BR ; + ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_BV ; + ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[VECS ] =MI_SEMAPHORE_SYNC_BVE ; + ring->semaphore.signal_mbox[RCS ] =GEN6_RBSYNC ; + ring->semaphore.signal_mbox[VCS ] =GEN6_VBSYNC ; + ring->semaphore.signal_mbox[BCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[VECS ] =GEN6_VEBSYNC ; } - ring->semaphore.sync_to = gen6_ring_sync; -if (i915_semaphore_is_enabled (dev)) - ring->semaphore.signal = gen6_signal; - ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_BR ; - ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_BV ; - ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_INVALID ; - ring->semaphore.mbox[VECS ] =MI_SEMAPHORE_SYNC_BVE ; - ring->semaphore.signal_mbox[RCS ] =GEN6_RBSYNC ; - ring->semaphore.signal_mbox[VCS ] =GEN6_VBSYNC ; - ring->semaphore.signal_mbox[BCS ] =GEN6_NOSYNC ; - ring->semaphore.signal_mbox[VECS ] =GEN6_VEBSYNC ; + ring->init = init_ring_common;return intel_init_ring_buffer (dev, ring);
@@ -2148,23 +2186,35 @@ int intel_init_vebox_ring_buffer(struct drm_device *dev) ring->irq_get = gen8_ring_get_irq; ring->irq_put = gen8_ring_put_irq; ring->dispatch_execbuffer = gen8_ring_dispatch_execbuffer; + ring->semaphore.sync_to = gen6_ring_sync; +if (i915_semaphore_is_enabled (dev)) + ring->semaphore.signal = gen6_signal; + ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.mbox[VECS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.signal_mbox[RCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[VCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[BCS ] =GEN6_NOSYNC ; + ring->semaphore.signal_mbox[VECS ] =GEN6_NOSYNC ; }else { ring->irq_enable_mask =PM_VEBOX_USER_INTERRUPT ; ring->irq_get = hsw_vebox_get_irq; ring->irq_put = hsw_vebox_put_irq; + ring->semaphore.sync_to = gen6_ring_sync; +if (i915_semaphore_is_enabled (dev)) + ring->semaphore.signal = gen6_signal; + ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_VER ; + ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_VEV ; + ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_VEB ; + ring->semaphore.mbox[VECS ] =MI_SEMAPHORE_SYNC_INVALID ; + ring->semaphore.signal_mbox[RCS ] =GEN6_RVESYNC ; + ring->semaphore.signal_mbox[VCS ] =GEN6_VVESYNC ; + ring->semaphore.signal_mbox[BCS ] =GEN6_BVESYNC ; + ring->semaphore.signal_mbox[VECS ] =GEN6_NOSYNC ; ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer; } - ring->semaphore.sync_to = gen6_ring_sync; -if (i915_semaphore_is_enabled (dev)) - ring->semaphore.signal = gen6_signal; - ring->semaphore.mbox[RCS ] =MI_SEMAPHORE_SYNC_VER ; - ring->semaphore.mbox[VCS ] =MI_SEMAPHORE_SYNC_VEV ; - ring->semaphore.mbox[BCS ] =MI_SEMAPHORE_SYNC_VEB ; - ring->semaphore.mbox[VECS ] =MI_SEMAPHORE_SYNC_INVALID ; - ring->semaphore.signal_mbox[RCS ] =GEN6_RVESYNC ; - ring->semaphore.signal_mbox[VCS ] =GEN6_VVESYNC ; - ring->semaphore.signal_mbox[BCS ] =GEN6_BVESYNC ; - ring->semaphore.signal_mbox[VECS ] =GEN6_NOSYNC ; + ring->init = init_ring_common;return intel_init_ring_buffer (dev, ring);
Signature · 1 line
1.8.5.1
PATCH 8/17 drm/i915: Create for_all_rings
In reply to Ben WidawskyThis macro, unlike for_each_ring, will iterate all rings supported by the platform. It is distinct from for_each_ring in that it can be used before rings are initialized (and after they are destroyed).
NOTE: I've written this macro a few times in a few different places. The name differed this time.
--- drivers/gpu/drm/i915/i915_drv.h | 4 ++++ 1 file changed, 4 insertions(+)
drivers/gpu/drm/i915/i915_drv.h +4 -0
@@ -1541,6 +1541,10 @@ static inline struct drm_i915_private *to_i915(const struct drm_device *dev)for ((i__) =0 ; (i__) <I915_NUM_RINGS ; (i__)++) \ if (((ring__) = &(dev_priv__)->ring[(i__)]), intel_ring_initialized((ring__))) +#define for_all_rings (ring__, dev_priv__, i__) \ + for ((i__) = 0; (i__) < I915_NUM_RINGS; (i__)++) \ + if (((ring__) = &(dev_priv__)->ring[(i__)]), (INTEL_INFO((dev_priv__)->dev)->ring_mask & (1 << i__))) +enum hdmi_force_audio {HDMI_AUDIO_OFF_DVI =-2 ,/* no aux data for HDMI-DVI converter */ HDMI_AUDIO_OFF ,/* force turn off HDMI audio */
Signature · 1 line
1.8.5.1
PATCH 9/17 drm/i915: init ring->id early
In reply to Ben WidawskyHaving the ring id all set up will allow us to use some macro shortcuts during ringbuffer init. Admittedly it leaves the code a bit confusing, having the initialization of the id member in a separate place - but I think the savings is worth it.
--- drivers/gpu/drm/i915/i915_gem.c | 6 +++++- drivers/gpu/drm/i915/intel_ringbuffer.c | 4 ---- 2 files changed, 5 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/i915_gem.c +5 -1
@@ -4420,7 +4420,11 @@ intel_enable_blt(struct drm_device *dev)static int i915_gem_init_rings (struct drm_device *dev) {struct drm_i915_private *dev_priv = dev->dev_private; -int ret; +struct intel_ring_buffer *ring; +int ret, i; + +for_all_rings (ring, dev_priv, i) + dev_priv->ring[i].id = i; ret =intel_init_render_ring_buffer (dev);if (ret)
drivers/gpu/drm/i915/intel_ringbuffer.c +0 -4
@@ -1855,7 +1855,6 @@ int intel_init_render_ring_buffer(struct drm_device *dev)struct intel_ring_buffer *ring = &dev_priv->ring[RCS ]; ring->name ="render ring" ; - ring->id =RCS ; ring->mmio_base =RENDER_RING_BASE ;if (INTEL_INFO (dev)->gen >=8 ) {
@@ -2041,7 +2040,6 @@ int intel_init_bsd_ring_buffer(struct drm_device *dev)struct intel_ring_buffer *ring = &dev_priv->ring[VCS ]; ring->name ="bsd ring" ; - ring->id =VCS ; ring->write_tail = ring_write_tail;if (INTEL_INFO (dev)->gen >=6 ) {
@@ -2117,7 +2115,6 @@ int intel_init_blt_ring_buffer(struct drm_device *dev)struct intel_ring_buffer *ring = &dev_priv->ring[BCS ]; ring->name ="blitter ring" ; - ring->id =BCS ; ring->mmio_base =BLT_RING_BASE ; ring->write_tail = ring_write_tail;
@@ -2171,7 +2168,6 @@ int intel_init_vebox_ring_buffer(struct drm_device *dev)struct intel_ring_buffer *ring = &dev_priv->ring[VECS ]; ring->name ="video enhancement ring" ; - ring->id =VECS ; ring->mmio_base =VEBOX_RING_BASE ; ring->write_tail = ring_write_tail;
Signature · 1 line
1.8.5.1
Re: [PATCH 09/17] drm/i915: init ring->id early
Quoted 4 lines · Ben Widawsky
Having the ring id all set up will allow us to use some macro shortcuts during ringbuffer init. Admittedly it leaves the code a bit confusing, having the initialization of the id member in a separate place - but I think the savings is worth it.
This is not required since the macro could be written more simply as ring[i]->id == i.
-Chris
Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre
Re: [PATCH 09/17] drm/i915: init ring->id early
Quoted 10 lines · Chris Wilson
Quoted 4 lines · Ben Widawsky
Having the ring id all set up will allow us to use some macro shortcuts during ringbuffer init. Admittedly it leaves the code a bit confusing, having the initialization of the id member in a separate place - but I think the savings is worth it.
This is not required since the macro could be written more simply as ring[i]->id == i.
-Chris
It could be written as ring->id = i. Is that what you mean? I didn't quite follow the "not required" part.
Signature · 1 line
Ben Widawsky, Intel Open Source Technology Center
Re: [PATCH 09/17] drm/i915: init ring->id early
Quoted 7 lines · Ben Widawsky
Quoted 6 lines · Chris Wilson
Quoted 4 lines · Ben Widawsky
Having the ring id all set up will allow us to use some macro shortcuts during ringbuffer init. Admittedly it leaves the code a bit confusing, having the initialization of the id member in a separate place - but I think the savings is worth it.
Quoted 7 lines
Quoted 4 lines
This is not required since the macro could be written more simply as ring[i]->id == i.
-ChrisIt could be written as
ring->id= i. Is that what you mean? I didn't quite follow the "not required" part.
Afaict this pre-init is only required because the macro you wrote depends upon ring[n]->id, but the macro can be trivially written not to use ring[n]->id but n.
-Chris
Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre
Re: [PATCH 09/17] drm/i915: init ring->id early
Quoted 13 lines · Chris Wilson
Quoted 12 lines · Ben Widawsky
Quoted 10 lines · Chris Wilson
Quoted 4 lines · Ben Widawsky
Having the ring id all set up will allow us to use some macro shortcuts during ringbuffer init. Admittedly it leaves the code a bit confusing, having the initialization of the id member in a separate place - but I think the savings is worth it.
This is not required since the macro could be written more simply as ring[i]->id == i.
-Chris
Quoted 8 lines
Quoted 2 lines
It could be written as
ring->id= i. Is that what you mean? I didn't quite follow the "not required" part.Afaict this pre-init is only required because the macro you wrote depends upon ring[n]->id, but the macro can be trivially written not to use ring[n]->id but n.
-Chris
It appears so. I know for certain something blew up with an earlier version of this patch, but the original version was indeed not the same. I do need ring->id for the macro, but that's not a problem here.
So yeah, look like good advice, and I feel silly.
Signature · 1 line
Ben Widawsky, Intel Open Source Technology Center
PATCH 10/17 drm/i915/bdw: implement semaphore signal
In reply to Ben WidawskySemaphore signalling works similarly to previous GENs with the exception that the per ring mailboxes no longer exist. Instead you must define your own space, somewhere in the GTT.
The comments in the code define the layout I've opted for, which should be fairly future proof. Ie. I tried to define offsets in abstract terms (NUM_RINGS, seqno size, etc).
NOTE: If one wanted to move this to the HWSP they could. I've decided one 4k object would be easier to deal with, and provide potential wins with cache locality, but that's all speculative.
--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_reg.h | 5 +- drivers/gpu/drm/i915/intel_ringbuffer.c | 197 +++++++++++++++++++++++++------- drivers/gpu/drm/i915/intel_ringbuffer.h | 38 +++++- 4 files changed, 195 insertions(+), 46 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +1 -0
@@ -1350,6 +1350,7 @@ typedef struct drm_i915_private {struct pci_dev *bridge_dev;struct intel_ring_buffer ring[I915_NUM_RINGS ]; +struct drm_i915_gem_object *semaphore_obj;uint32_t last_seqno, next_seqno;drm_dma_handle_t *status_page_dmah;
drivers/gpu/drm/i915/i915_reg.h +4 -1
@@ -215,7 +215,7 @@#define MI_DISPLAY_FLIP_IVB_SPRITE_B (3 << 19)#define MI_DISPLAY_FLIP_IVB_PLANE_C (4 << 19)#define MI_DISPLAY_FLIP_IVB_SPRITE_C (5 << 19) -#define MI_SEMAPHORE_MBOX MI_INSTR(0x16, 1)/* gen6+ */ +#define MI_SEMAPHORE_MBOX MI_INSTR(0x16, 1)/* gen6, gen7 */ #define MI_SEMAPHORE_GLOBAL_GTT (1<<22)#define MI_SEMAPHORE_UPDATE (1<<21)#define MI_SEMAPHORE_COMPARE (1<<20)
@@ -240,6 +240,8 @@#define MI_RESTORE_EXT_STATE_EN (1<<2)#define MI_FORCE_RESTORE (1<<1)#define MI_RESTORE_INHIBIT (1<<0) +#define MI_SEMAPHORE_SIGNAL MI_INSTR(0x1b, 0)/* GEN8+ */ +#define MI_SEMAPHORE_TARGET (engine) ((engine)<<15)#define MI_STORE_DWORD_IMM MI_INSTR(0x20, 1)#define MI_MEM_VIRTUAL (1 << 22)/* 965+ only */ #define MI_STORE_DWORD_INDEX MI_INSTR(0x21, 1)
@@ -328,6 +330,7 @@#define PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE (1<<10)/* GM45+ only */ #define PIPE_CONTROL_INDIRECT_STATE_DISABLE (1<<9)#define PIPE_CONTROL_NOTIFY (1<<8) +#define PIPE_CONTROL_FLUSH_ENABLE (1<<7)/* gen7+ */ #define PIPE_CONTROL_VF_CACHE_INVALIDATE (1<<4)#define PIPE_CONTROL_CONST_CACHE_INVALIDATE (1<<3)#define PIPE_CONTROL_STATE_CACHE_INVALIDATE (1<<2)
drivers/gpu/drm/i915/intel_ringbuffer.c +153 -44
254 lines not on this page · raw message
drivers/gpu/drm/i915/intel_ringbuffer.h +37 -1
@@ -111,6 +111,39 @@ struct intel_ring_buffer {#define I915_DISPATCH_PINNED 0x2void (*cleanup)(struct intel_ring_buffer *ring); +/* GEN8 signal/wait table +* signal to signal to signal to signal to +* RCS VCS BCS VECS +* ------------------------------------------------------ +* RCS | NOP (0x00) | BCS (0x08) | VCS (0x10) | VECS (0x18) | +* |----------------------------------------------------- +* VCS | RCS (0x20) | NOP (0x28) | BCS (0x30) | VECS (0x38) | +* |----------------------------------------------------- +* BCS | RCS (0x40) | VCS (0x48) | NOP (0x50) | VECS (0x58) | +* |----------------------------------------------------- +* VECS | RCS (0x60) | VCS (0x68) | BCS (0x70) | NOP (0x78) | +* |----------------------------------------------------- +* +* Generalization: +* f(x, y) := (x->id * NUM_RINGS) + (seqno_size * y->id) +* ie. transpose of g(x, y) +* +* sync from sync from sync from sync from +* RCS VCS BCS VECS +* ------------------------------------------------------ +* RCS | NOP (0x00) | BCS (0x20) | VCS (0x40) | VECS (0x60) | +* |----------------------------------------------------- +* VCS | RCS (0x08) | NOP (0x28) | BCS (0x48) | VECS (0x68) | +* |----------------------------------------------------- +* BCS | RCS (0x10) | VCS (0x30) | NOP (0x50) | VECS (0x60) | +* |----------------------------------------------------- +* VECS | RCS (0x18) | VCS (0x38) | BCS (0x58) | NOP (0x78) | +* |----------------------------------------------------- +* +* Generalization: +* g(x, y) := (y->id * NUM_RINGS * NUM_RINGS) + (seqno_size * x->id) +* ie. transpose of f(x, y) +*/ struct {u32 sync_seqno[I915_NUM_RINGS -1 ];/* AKA wait() */
@@ -120,7 +153,10 @@ struct intel_ring_buffer {/* our mbox written by others */ u32 mbox[I915_NUM_RINGS ];/* mboxes this ring signals to */ -u32 signal_mbox[I915_NUM_RINGS ]; +union { +u32 signal_mbox[I915_NUM_RINGS ]; +u64 signal_ggtt[I915_NUM_RINGS ]; + };int (*signal)(struct intel_ring_buffer *signaller); } semaphore;
Signature · 1 line
1.8.5.1
PATCH 11/17 drm/i915/bdw: implement semaphore wait
In reply to Ben WidawskySemaphore waits use a new instruction, MI_SEMAPHORE_WAIT. The seqno to wait on is all well defined by the table in the previous patch. There is nothing else different from previous GEN's semaphore synchronization code.
--- drivers/gpu/drm/i915/i915_reg.h | 3 ++ drivers/gpu/drm/i915/intel_ringbuffer.c | 66 +++++++++++++++------------------ drivers/gpu/drm/i915/intel_ringbuffer.h | 30 +++++++++++++++ 3 files changed, 62 insertions(+), 37 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +3 -0
@@ -242,6 +242,9 @@#define MI_RESTORE_INHIBIT (1<<0)#define MI_SEMAPHORE_SIGNAL MI_INSTR(0x1b, 0)/* GEN8+ */ #define MI_SEMAPHORE_TARGET (engine) ((engine)<<15) +#define MI_SEMAPHORE_WAIT MI_INSTR(0x1c, 2)/* GEN8+ */ +#define MI_SEMAPHORE_POLL (1<<15) +#define MI_SEMAPHORE_SAD_GTE_SDD (1<<12)#define MI_STORE_DWORD_IMM MI_INSTR(0x20, 1)#define MI_MEM_VIRTUAL (1 << 22)/* 965+ only */ #define MI_STORE_DWORD_INDEX MI_INSTR(0x21, 1)
drivers/gpu/drm/i915/intel_ringbuffer.c +29 -37
102 lines not on this page · raw message
drivers/gpu/drm/i915/intel_ringbuffer.h +30 -0
@@ -33,6 +33,36 @@ struct intel_hw_status_page {#define I915_READ_IMR (ring) I915_READ(RING_IMR((ring)->mmio_base))#define I915_WRITE_IMR (ring, val) I915_WRITE(RING_IMR((ring)->mmio_base), val) +/* seqno size is actually only a uint32, but since we plan to use MI_FLUSH_DW to +* do the writes, and that must have qw aligned offsets, simply pretend it's 8b. +*/ +#define i915_semaphore_seqno_size sizeof(uint64_t) +#define GEN8_SIGNAL_OFFSET (to) \ + (i915_gem_obj_ggtt_offset(dev_priv->semaphore_obj) + \ + (ring->id * I915_NUM_RINGS * i915_semaphore_seqno_size) + \ + (i915_semaphore_seqno_size * dev_priv->ring[(to)].id)) + +#define GEN8_WAIT_OFFSET (__ring, from) \ + (i915_gem_obj_ggtt_offset(dev_priv->semaphore_obj) + \ + (dev_priv->ring[(from)].id * I915_NUM_RINGS * i915_semaphore_seqno_size) + \ + (i915_semaphore_seqno_size * (__ring)->id)) + +#define GEN8_RING_SEMAPHORE_INIT do { \ + if (!dev_priv->semaphore_obj) { \ + break; \ + } \ + ring->semaphore.signal_ggtt[RCS] = GEN8_SIGNAL_OFFSET(RCS); \ + ring->semaphore.signal_ggtt[VCS] = GEN8_SIGNAL_OFFSET(VCS); \ + ring->semaphore.signal_ggtt[BCS] = GEN8_SIGNAL_OFFSET(BCS); \ + ring->semaphore.signal_ggtt[VECS] = GEN8_SIGNAL_OFFSET(VECS); \ + ring->semaphore.mbox[RCS] = GEN8_WAIT_OFFSET(ring, RCS); \ + ring->semaphore.mbox[VCS] = GEN8_WAIT_OFFSET(ring, VCS); \ + ring->semaphore.mbox[BCS] = GEN8_WAIT_OFFSET(ring, BCS); \ + ring->semaphore.mbox[VECS] = GEN8_WAIT_OFFSET(ring, VECS); \ + ring->semaphore.signal_ggtt[ring->id] = MI_SEMAPHORE_SYNC_INVALID; \ + ring->semaphore.mbox[ring->id] = GEN6_NOSYNC; \ + } while(0) +enum intel_ring_hangcheck_action {HANGCHECK_IDLE =0 ,HANGCHECK_WAIT ,
Signature · 1 line
1.8.5.1
PATCH 12/17 drm/i915: FORCE_RESTORE for gen8 semaphores
In reply to Ben WidawskyImplement the note indicated in the bspec.
--- drivers/gpu/drm/i915/i915_gem_context.c | 9 +++++++++ 1 file changed, 9 insertions(+)
drivers/gpu/drm/i915/i915_gem_context.c +9 -0
@@ -446,6 +446,15 @@ static int do_switch(struct i915_hw_context *to)if (!to->is_initialized ||is_default_context (to)) hw_flags |=MI_RESTORE_INHIBIT ; +/* When SW intends to use semaphore signaling between Command streamers, +* it must avoid lite restores in HW by programming "Force Restore" bit +* to ‘1’ in context descriptor during context submission +* +* XXX: is this really needed for ringbuffer mode? +*/ +if (IS_GEN8 (ring->dev) &&i915_semaphore_is_enabled (ring->dev)) + hw_flags |=MI_FORCE_RESTORE ; + ret =mi_set_context (ring, to, hw_flags);if (ret) {i915_gem_object_unpin (to->obj);
Signature · 1 line
1.8.5.1
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 13/17 drm/i915/bdw: poll semaphores
In reply to Ben Widawsky--- drivers/gpu/drm/i915/intel_ringbuffer.c | 1 + 1 file changed, 1 insertion(+)
drivers/gpu/drm/i915/intel_ringbuffer.c +1 -0
@@ -811,6 +811,7 @@ gen8_ring_sync(struct intel_ring_buffer *waiter,intel_ring_emit (waiter,MI_SEMAPHORE_WAIT |MI_SEMAPHORE_GLOBAL_GTT | +MI_SEMAPHORE_POLL |MI_SEMAPHORE_SAD_GTE_SDD );intel_ring_emit (waiter, seqno); intel_ring_emit(waiter,
Signature · 1 line
1.8.5.1
PATCH 14/17 drm/i915: Extract semaphore error collection
In reply to Ben Widawsky--- drivers/gpu/drm/i915/i915_gpu_error.c | 31 +++++++++++++++++++------------ 1 file changed, 19 insertions(+), 12 deletions(-)
drivers/gpu/drm/i915/i915_gpu_error.c +19 -12
@@ -695,6 +695,24 @@ i915_error_first_batchbuffer(struct drm_i915_private *dev_priv,return NULL ; } +static void gen6_record_semaphore_state (struct drm_i915_private *dev_priv, +struct drm_i915_error_state *error, +struct intel_ring_buffer *ring) +{ + error->semaphore_mboxes[ring->id][0 ] + =I915_READ (RING_SYNC_0 (ring->mmio_base)); + error->semaphore_mboxes[ring->id][1 ] + =I915_READ (RING_SYNC_1 (ring->mmio_base)); + error->semaphore_seqno[ring->id][0 ] = ring->semaphore.sync_seqno[0 ]; + error->semaphore_seqno[ring->id][1 ] = ring->semaphore.sync_seqno[1 ]; + +if (HAS_VEBOX (dev_priv->dev)) { + error->semaphore_mboxes[ring->id][2 ] = +I915_READ (RING_SYNC_2 (ring->mmio_base)); + error->semaphore_seqno[ring->id][2 ] = ring->semaphore.sync_seqno[2 ]; + } +} +static void i915_record_ring_state (struct drm_device *dev,struct drm_i915_error_state *error,struct intel_ring_buffer *ring)
@@ -704,18 +722,7 @@ static void i915_record_ring_state(struct drm_device *dev,if (INTEL_INFO (dev)->gen >=6 ) { error->rc_psmi[ring->id] =I915_READ (ring->mmio_base +0x50 ); error->fault_reg[ring->id] =I915_READ (RING_FAULT_REG (ring)); - error->semaphore_mboxes[ring->id][0 ] - =I915_READ (RING_SYNC_0 (ring->mmio_base)); - error->semaphore_mboxes[ring->id][1 ] - =I915_READ (RING_SYNC_1 (ring->mmio_base)); - error->semaphore_seqno[ring->id][0 ] = ring->semaphore.sync_seqno[0 ]; - error->semaphore_seqno[ring->id][1 ] = ring->semaphore.sync_seqno[1 ]; - } - -if (HAS_VEBOX (dev)) { - error->semaphore_mboxes[ring->id][2 ] = -I915_READ (RING_SYNC_2 (ring->mmio_base)); - error->semaphore_seqno[ring->id][2 ] = ring->semaphore.sync_seqno[2 ]; +gen6_record_semaphore_state (dev_priv, error, ring); }if (INTEL_INFO (dev)->gen >=4 ) {
Signature · 1 line
1.8.5.1
PATCH 15/17 drm/i915/bdw: collect semaphore error state
In reply to Ben WidawskySince the semaphore information is in an object, just dump it, and let the user parse it later.
NOTE: The page being used for the semaphores are incoherent with the CPU. No matter what I do, I cannot figure out a way to read anything but 0s. Note that the semaphore waits are indeed working.
--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_gpu_error.c | 46 ++++++++++++++++++++++++++++++--- drivers/gpu/drm/i915/intel_ringbuffer.h | 12 ++++----- 3 files changed, 50 insertions(+), 9 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +1 -0
@@ -312,6 +312,7 @@ struct drm_i915_error_state {u32 acthd[I915_NUM_RINGS ];u32 semaphore_mboxes[I915_NUM_RINGS ][I915_NUM_RINGS -1 ];u32 semaphore_seqno[I915_NUM_RINGS ][I915_NUM_RINGS -1 ]; +struct drm_i915_error_object *semaphore_obj;u32 rc_psmi[I915_NUM_RINGS ];/* sleep state */ /* our own tracking of ring head and tail */ u32 cpu_ring_head[I915_NUM_RINGS ];
drivers/gpu/drm/i915/i915_gpu_error.c +43 -3
76 lines not on this page · raw message
drivers/gpu/drm/i915/intel_ringbuffer.h +6 -6
@@ -37,9 +37,9 @@ struct intel_hw_status_page {* do the writes, and that must have qw aligned offsets, simply pretend it's 8b. */ #define i915_semaphore_seqno_size sizeof(uint64_t) -#define GEN8_SIGNAL_OFFSET (to) \ +#define GEN8_SIGNAL_OFFSET (__ring, to) \ (i915_gem_obj_ggtt_offset(dev_priv->semaphore_obj) + \ - (ring->id * I915_NUM_RINGS * i915_semaphore_seqno_size) + \ + ((__ring)->id * I915_NUM_RINGS * i915_semaphore_seqno_size) + \ (i915_semaphore_seqno_size * dev_priv->ring[(to)].id))#define GEN8_WAIT_OFFSET (__ring, from) \
@@ -51,10 +51,10 @@ struct intel_hw_status_page {if (!dev_priv->semaphore_obj) { \break ; \ } \ - ring->semaphore.signal_ggtt[RCS ] =GEN8_SIGNAL_OFFSET (RCS ); \ - ring->semaphore.signal_ggtt[VCS ] =GEN8_SIGNAL_OFFSET (VCS ); \ - ring->semaphore.signal_ggtt[BCS ] =GEN8_SIGNAL_OFFSET (BCS ); \ - ring->semaphore.signal_ggtt[VECS ] =GEN8_SIGNAL_OFFSET (VECS ); \ + ring->semaphore.signal_ggtt[RCS ] =GEN8_SIGNAL_OFFSET (ring,RCS ); \ + ring->semaphore.signal_ggtt[VCS ] =GEN8_SIGNAL_OFFSET (ring,VCS ); \ + ring->semaphore.signal_ggtt[BCS ] =GEN8_SIGNAL_OFFSET (ring,BCS ); \ + ring->semaphore.signal_ggtt[VECS ] =GEN8_SIGNAL_OFFSET (ring,VECS ); \ ring->semaphore.mbox[RCS ] =GEN8_WAIT_OFFSET (ring,RCS ); \ ring->semaphore.mbox[VCS ] =GEN8_WAIT_OFFSET (ring,VCS ); \ ring->semaphore.mbox[BCS ] =GEN8_WAIT_OFFSET (ring,BCS ); \
Signature · 1 line
1.8.5.1
Re: [PATCH 15/17] drm/i915/bdw: collect semaphore error state
Quoted 9 lines · Ben Widawsky
Since the semaphore information is in an object, just dump it, and let the user parse it later.
NOTE: The page being used for the semaphores are incoherent with the CPU. No matter what I do, I cannot figure out a way to read anything but 0s. Note that the semaphore waits are indeed working.
Signed-off-by Ben Widawsky <[email protected]>
[snip]
Quoted 15 lines
drivers/gpu/drm/i915/i915_gpu_error.c +15
-0+static void gen8_record_semaphore_state (struct drm_i915_private *dev_priv, +struct drm_i915_error_state *error, +struct intel_ring_buffer *ring) +{ +struct intel_ring_buffer *useless; +int i; + +if (!i915_semaphore_is_enabled (dev_priv->dev)) +return ; + +if (!error->semaphore_obj) + error->semaphore_obj = +i915_error_object_create (dev_priv, + dev_priv->semaphore_obj); +
drivers/gpu/drm/i915/i915_gpu_error.c static void gen6_record_semaphore_state(struct drm_i915_private *dev_priv, · line 752
Quoted 10 lines
drivers/gpu/drm/i915/i915_gpu_error.c +10
-0+for_each_ring (useless, dev_priv, i) { +u16 signal_offset =GEN8_SIGNAL_OFFSET (ring, i) /4 ; +u16 wait_offset =GEN8_WAIT_OFFSET (ring, i) /4 ; +u32 *tmp = error->semaphore_obj->pages[0 ]; + + error->semaphore_mboxes[ring->id][i] = tmp[signal_offset]; + error->semaphore_seqno[ring->id][i] = tmp[wait_offset]; + } +} +
Chris, I preemptively assume this rubs you the wrong way. I had been trying to do the analogous of the I915_READ from previous gens. I felt it was more consistent with reading of hardware state. If you want me to simply use the ring->semaphore.*, I can. I just wanted to make my intention clear.
[snip]
Signature · 1 line
Ben Widawsky, Intel Open Source Technology Center
Re: [PATCH 15/17] drm/i915/bdw: collect semaphore error state
Quoted 36 lines · Ben Widawsky
Quoted 9 lines · Ben Widawsky
Since the semaphore information is in an object, just dump it, and let the user parse it later.
NOTE: The page being used for the semaphores are incoherent with the CPU. No matter what I do, I cannot figure out a way to read anything but 0s. Note that the semaphore waits are indeed working.
Signed-off-by Ben Widawsky <[email protected]>[snip]
Quoted 23 lines
drivers/gpu/drm/i915/i915_gpu_error.c +23
-0+static void gen8_record_semaphore_state (struct drm_i915_private *dev_priv, +struct drm_i915_error_state *error, +struct intel_ring_buffer *ring) +{ +struct intel_ring_buffer *useless; +int i; + +if (!i915_semaphore_is_enabled (dev_priv->dev)) +return ; + +if (!error->semaphore_obj) + error->semaphore_obj = +i915_error_object_create (dev_priv, + dev_priv->semaphore_obj); + +for_each_ring (useless, dev_priv, i) { +u16 signal_offset =GEN8_SIGNAL_OFFSET (ring, i) /4 ; +u16 wait_offset =GEN8_WAIT_OFFSET (ring, i) /4 ; +u32 *tmp = error->semaphore_obj->pages[0 ]; + + error->semaphore_mboxes[ring->id][i] = tmp[signal_offset]; + error->semaphore_seqno[ring->id][i] = tmp[wait_offset]; + }
Quoted 8 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+} +Chris, I preemptively assume this rubs you the wrong way. I had been trying to do the analogous of the
I915_READfrom previous gens. I felt it was more consistent with reading of hardware state. If you want me to simply use the ring->semaphore.*, I can. I just wanted to make my intention clear.
Capturing the semaphore_obj itself looks a bit silly since we never do dump it into i915_error_state, but I actually like how you've reading back of the semaphore page for debugging hangs. And don't we also include our own semaphore seqno values in the i915_error_state as well? Oh, I see now. You've overwritten those values. Whoops. We do need to keep ring->sync_seqno[] in the debug output for a certain class of (driver) bug. So it looks like we could do with all three values (current signal, last wait, last known sync) in the error state.
-Chris
Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre
Re: [PATCH 15/17] drm/i915/bdw: collect semaphore error state
Quoted 46 lines · Chris Wilson
Quoted 36 lines · Ben Widawsky
Quoted 9 lines · Ben Widawsky
Since the semaphore information is in an object, just dump it, and let the user parse it later.
NOTE: The page being used for the semaphores are incoherent with the CPU. No matter what I do, I cannot figure out a way to read anything but 0s. Note that the semaphore waits are indeed working.
Signed-off-by Ben Widawsky <[email protected]>[snip]
Quoted 23 lines
drivers/gpu/drm/i915/i915_gpu_error.c +23
-0+static void gen8_record_semaphore_state (struct drm_i915_private *dev_priv, +struct drm_i915_error_state *error, +struct intel_ring_buffer *ring) +{ +struct intel_ring_buffer *useless; +int i; + +if (!i915_semaphore_is_enabled (dev_priv->dev)) +return ; + +if (!error->semaphore_obj) + error->semaphore_obj = +i915_error_object_create (dev_priv, + dev_priv->semaphore_obj); + +for_each_ring (useless, dev_priv, i) { +u16 signal_offset =GEN8_SIGNAL_OFFSET (ring, i) /4 ; +u16 wait_offset =GEN8_WAIT_OFFSET (ring, i) /4 ; +u32 *tmp = error->semaphore_obj->pages[0 ]; + + error->semaphore_mboxes[ring->id][i] = tmp[signal_offset]; + error->semaphore_seqno[ring->id][i] = tmp[wait_offset]; + }Quoted 8 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+} +Chris, I preemptively assume this rubs you the wrong way. I had been trying to do the analogous of the
I915_READfrom previous gens. I felt it was more consistent with reading of hardware state. If you want me to simply use the ring->semaphore.*, I can. I just wanted to make my intention clear.
Quoted 3 lines
Capturing the
semaphore_objitself looks a bit silly since we never do dump it intoi915_error_state, but I actually like how you've reading back of the semaphore page for debugging hangs.
I don't understand this comment. The semaphore page is dumped, though I snipped that, so maybe that's why you made the comment.
Quoted 10 lines
And don't we also include our own semaphore seqno values in the
i915_error_stateas well? Oh, I see now. You've overwritten those values. Whoops. We do need to keep ring->sync_seqno[] in the debug output for a certain class of (driver) bug. So it looks like we could do with all three values (current signal, last wait, last known sync) in the error state.
-ChrisSignature · 1 line
Chris Wilson, Intel Open Source Technology Centre
Signature · 1 line
Ben Widawsky, Intel Open Source Technology Center
Re: [PATCH 15/17] drm/i915/bdw: collect semaphore error state
Quoted 7 lines · Ben Widawsky
Quoted 3 lines · Chris Wilson
Capturing the
semaphore_objitself looks a bit silly since we never do dump it intoi915_error_state, but I actually like how you've reading back of the semaphore page for debugging hangs.I don't understand this comment. The semaphore page is dumped, though I snipped that, so maybe that's why you made the comment.
It's added to the error state, but not printed out by i915_gpu_error or freed, afaict. So the capture is just a convenient method to read back the page and not used afterwards.
-Chris
Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre
PATCH v3 15/17 drm/i915/bdw: collect semaphore error state
In reply to Ben WidawskySince the semaphore information is in an object, just dump it, and let the user parse it later.
NOTE: The page being used for the semaphores are incoherent with the CPU. No matter what I do, I cannot figure out a way to read anything but 0s. Note that the semaphore waits are indeed working.
v2: Don't print signal, and wait (they should be the same). Instead, print sync_seqno (Chris)
v3: Free the semaphore error object (Chris)
--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_gpu_error.c | 46 ++++++++++++++++++++++++++++++--- drivers/gpu/drm/i915/intel_ringbuffer.h | 12 ++++----- 3 files changed, 50 insertions(+), 9 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +1 -0
@@ -312,6 +312,7 @@ struct drm_i915_error_state {u32 acthd[I915_NUM_RINGS ];u32 semaphore_mboxes[I915_NUM_RINGS ][I915_NUM_RINGS -1 ];u32 semaphore_seqno[I915_NUM_RINGS ][I915_NUM_RINGS -1 ]; +struct drm_i915_error_object *semaphore_obj;u32 rc_psmi[I915_NUM_RINGS ];/* sleep state */ /* our own tracking of ring head and tail */ u32 cpu_ring_head[I915_NUM_RINGS ];
drivers/gpu/drm/i915/i915_gpu_error.c +43 -3
82 lines not on this page · raw message
drivers/gpu/drm/i915/intel_ringbuffer.h +6 -6
@@ -37,9 +37,9 @@ struct intel_hw_status_page {* do the writes, and that must have qw aligned offsets, simply pretend it's 8b. */ #define i915_semaphore_seqno_size sizeof(uint64_t) -#define GEN8_SIGNAL_OFFSET (to) \ +#define GEN8_SIGNAL_OFFSET (__ring, to) \ (i915_gem_obj_ggtt_offset(dev_priv->semaphore_obj) + \ - (ring->id * I915_NUM_RINGS * i915_semaphore_seqno_size) + \ + ((__ring)->id * I915_NUM_RINGS * i915_semaphore_seqno_size) + \ (i915_semaphore_seqno_size * dev_priv->ring[(to)].id))#define GEN8_WAIT_OFFSET (__ring, from) \
@@ -51,10 +51,10 @@ struct intel_hw_status_page {if (!dev_priv->semaphore_obj) { \break ; \ } \ - ring->semaphore.signal_ggtt[RCS ] =GEN8_SIGNAL_OFFSET (RCS ); \ - ring->semaphore.signal_ggtt[VCS ] =GEN8_SIGNAL_OFFSET (VCS ); \ - ring->semaphore.signal_ggtt[BCS ] =GEN8_SIGNAL_OFFSET (BCS ); \ - ring->semaphore.signal_ggtt[VECS ] =GEN8_SIGNAL_OFFSET (VECS ); \ + ring->semaphore.signal_ggtt[RCS ] =GEN8_SIGNAL_OFFSET (ring,RCS ); \ + ring->semaphore.signal_ggtt[VCS ] =GEN8_SIGNAL_OFFSET (ring,VCS ); \ + ring->semaphore.signal_ggtt[BCS ] =GEN8_SIGNAL_OFFSET (ring,BCS ); \ + ring->semaphore.signal_ggtt[VECS ] =GEN8_SIGNAL_OFFSET (ring,VECS ); \ ring->semaphore.mbox[RCS ] =GEN8_WAIT_OFFSET (ring,RCS ); \ ring->semaphore.mbox[VCS ] =GEN8_WAIT_OFFSET (ring,VCS ); \ ring->semaphore.mbox[BCS ] =GEN8_WAIT_OFFSET (ring,BCS ); \
Signature · 1 line
1.8.5.1
PATCH 16/17 drm/i915: unleash semaphores on gen8
In reply to Ben WidawskyEverything should be lined up now to make gen8 semaphores work like they did on previous generations, so just do it.
--- drivers/gpu/drm/i915/i915_drv.c | 6 ------ 1 file changed, 6 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +0 -6
@@ -482,12 +482,6 @@ bool i915_semaphore_is_enabled(struct drm_device *dev)if (INTEL_INFO (dev)->gen <6 )return 0 ; -/* Until we get further testing... */ -if (IS_GEN8 (dev)) { -WARN_ON (!i915_preliminary_hw_support); -return 0 ; - } -if (i915_semaphores >=0 )return i915_semaphores;
Signature · 1 line
1.8.5.1
PATCH 17/17 drm/i915: semaphore debugfs
In reply to Ben WidawskySimple debugfs file to display the current state of semaphores. This is useful if you want to see the state without hanging the GPU.
NOTE: This patch is optional to the series.
NOTE2: Like the GPU error state collection, the reads are currently incoherent.
--- drivers/gpu/drm/i915/i915_debugfs.c | 69 +++++++++++++++++++++++++++++++++++++ 1 file changed, 69 insertions(+)
drivers/gpu/drm/i915/i915_debugfs.c +69 -0
@@ -1954,6 +1954,74 @@ static int i915_power_domain_info(struct seq_file *m, void *unused)return 0 ; } +static int i915_semaphore_status (struct seq_file *m,void *unused) +{ +struct drm_info_node *node = (struct drm_info_node *) m->private; +struct drm_device *dev = node->minor->dev; +struct drm_i915_private *dev_priv = dev->dev_private; +struct intel_ring_buffer *ring; +int i, j, ret; + +if (!i915_semaphore_is_enabled (dev)) { +seq_puts (m,"Semaphores are disabled\n" ); +return 0 ; + } + + ret =mutex_lock_interruptible (&dev->struct_mutex); +if (ret) +return ret; + +if (IS_BROADWELL (dev)) { +struct page *page; +uint64_t *seqno; + + page =i915_gem_object_get_page (dev_priv->semaphore_obj,0 ); + + seqno = (uint64_t *)kmap_atomic (page); +for_each_ring (ring, dev_priv, i) { +uint64_t offset; + +seq_printf (m,"%s\n" , ring->name); + +seq_puts (m," Last signal:" ); +for (j =0 ; j <I915_NUM_RINGS ; j++) { + offset = i *I915_NUM_RINGS + j; +seq_printf (m,"0x%08llx (0x%02llx) " , + seqno[offset], offset *8 ); + } +seq_putc (m,'\n' ); + +seq_puts (m," Last wait: " ); +for (j =0 ; j <I915_NUM_RINGS ; j++) { + offset = i + (j *I915_NUM_RINGS ); +seq_printf (m,"0x%08llx (0x%02llx) " , + seqno[offset], offset *8 ); + } +seq_putc (m,'\n' ); + + } +kunmap_atomic (seqno); + }else { +seq_puts (m," Last signal:" ); +for_each_ring (ring, dev_priv, i) +for (j =0 ; j <I915_NUM_RINGS ; j++) +seq_printf (m,"0x%08x\n" ,I915_READ (ring->semaphore.signal_mbox[j])); +seq_putc (m,'\n' ); + } + +seq_puts (m,"\nSync seqno:\n" ); +for_each_ring (ring, dev_priv, i) { +for (j =0 ; j <I915_NUM_RINGS ; j++) { +seq_printf (m," 0x%08x " , ring->semaphore.sync_seqno[j]); + } +seq_putc (m,'\n' ); + } +seq_putc (m,'\n' ); + +mutex_unlock (&dev->struct_mutex); +return 0 ; +} +struct pipe_crc_info {const char *name;struct drm_device *dev;
@@ -3197,6 +3265,7 @@ static const struct drm_info_list i915_debugfs_list[] = { {"i915_energy_uJ", i915_energy_uJ, 0}, {"i915_pc8_status", i915_pc8_status, 0}, {"i915_power_domain_info", i915_power_domain_info, 0}, + {"i915_semaphore_status", i915_semaphore_status, 0}, };#define I915_DEBUGFS_ENTRIES ARRAY_SIZE(i915_debugfs_list)
Signature · 1 line
1.8.5.1
Quoted 10 lines · Ben Widawsky
Ben Widawsky (17):
drm/i915: Reorder/respace MI instruction definition drm/i915: Don't emit mbox updates without semaphores drm/i915: Move semaphore specific ring members to struct drm/i915: Virtualize the ringbuffer signal func drm/i915: Movering_begintosignal()
drm/i915: Make semaphore updates more precise drm/i915: gen specific semaphore info
drm/i915: Createfor_all_rings
drm/i915: initring->idearly
Quoted 8 lines
drm/i915/bdw: implement semaphore signal
drm/i915/bdw: implement semaphore wait
drm/i915:FORCE_RESTOREfor gen8 semaphores
drm/i915/bdw: poll semaphores
drm/i915: Extract semaphore error collection
drm/i915/bdw: collect semaphore error state
drm/i915: unleash semaphores on gen8
drm/i915: semaphore debugfs
By the end, don't you use a mix of tables and formula for writing the offsets for the wait/signal commands? Looks very inconsistent when there is a very simple routine for generating the appropriate semaphore slot given (waiter, signaller).
-Chris
Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre
Quoted 20 lines · Chris Wilson
Quoted 10 lines · Ben Widawsky
Ben Widawsky (17):
drm/i915: Reorder/respace MI instruction definition drm/i915: Don't emit mbox updates without semaphores drm/i915: Move semaphore specific ring members to struct drm/i915: Virtualize the ringbuffer signal func drm/i915: Movering_begintosignal()
drm/i915: Make semaphore updates more precise drm/i915: gen specific semaphore info
drm/i915: Createfor_all_rings
drm/i915: initring->idearlyQuoted 8 lines
drm/i915/bdw: implement semaphore signal
drm/i915/bdw: implement semaphore wait
drm/i915:FORCE_RESTOREfor gen8 semaphores
drm/i915/bdw: poll semaphores
drm/i915: Extract semaphore error collection
drm/i915/bdw: collect semaphore error state
drm/i915: unleash semaphores on gen8
drm/i915: semaphore debugfs
Quoted 6 lines
By the end, don't you use a mix of tables and formula for writing the offsets for the wait/signal commands? Looks very inconsistent when there is a very simple routine for generating the appropriate semaphore slot given (waiter, signaller).
-Chris
Excluding debugfs, which was left intentionally that way...
The only inconsistency, I think was in the error state capture, right? That was a last minute addition probably after I should have quit for the day. Do you see something other than error state (and debugfs)? I'll discuss the error state stuff with on the patch itself.
P.S. given our history on how to implement semaphore updates, I very much appreciate your grace.
Signature · 1 line
Ben Widawsky, Intel Open Source Technology Center
Quoted 29 lines · Ben Widawsky
Quoted 20 lines · Chris Wilson
Quoted 10 lines · Ben Widawsky
Ben Widawsky (17):
drm/i915: Reorder/respace MI instruction definition drm/i915: Don't emit mbox updates without semaphores drm/i915: Move semaphore specific ring members to struct drm/i915: Virtualize the ringbuffer signal func drm/i915: Movering_begintosignal()
drm/i915: Make semaphore updates more precise drm/i915: gen specific semaphore info
drm/i915: Createfor_all_rings
drm/i915: initring->idearlyQuoted 8 lines
drm/i915/bdw: implement semaphore signal
drm/i915/bdw: implement semaphore wait
drm/i915:FORCE_RESTOREfor gen8 semaphores
drm/i915/bdw: poll semaphores
drm/i915: Extract semaphore error collection
drm/i915/bdw: collect semaphore error state
drm/i915: unleash semaphores on gen8
drm/i915: semaphore debugfsQuoted 6 lines
By the end, don't you use a mix of tables and formula for writing the offsets for the wait/signal commands? Looks very inconsistent when there is a very simple routine for generating the appropriate semaphore slot given (waiter, signaller).
-Chris
Quoted 6 lines
Excluding debugfs, which was left intentionally that way...
The only inconsistency, I think was in the error state capture, right? That was a last minute addition probably after I should have quit for the day. Do you see something other than error state (and debugfs)? I'll discuss the error state stuff with on the patch itself.
The error state and signaller use the table, but the waiter uses the offset calculation. And debugfs does its own compact thing (which is ideal for neatly formating the table.).
perhaps
#define GEN8_SEMAPHORE(signaller, waiter) \
(i915_gem_obj_ggtt_offset(dev_priv->semaphore_obj) + \
(signaller * I915_NUM_RINGS + waiter) * SEQNO_SIZE)
#define GEN8_WAIT_OFFSET(from) GEN8_SEMAPHORE(from, ring->id) #define GEN8_SIGNAL_OFFSET(to) GEN8_SEMAPHORE(ring->id, to)
would make it clearer what I mean.
-Chris
Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre
Quoted 37 lines · Chris Wilson
Quoted 29 lines · Ben Widawsky
Quoted 20 lines · Chris Wilson
Quoted 10 lines · Ben Widawsky
Ben Widawsky (17):
drm/i915: Reorder/respace MI instruction definition drm/i915: Don't emit mbox updates without semaphores drm/i915: Move semaphore specific ring members to struct drm/i915: Virtualize the ringbuffer signal func drm/i915: Movering_begintosignal()
drm/i915: Make semaphore updates more precise drm/i915: gen specific semaphore info
drm/i915: Createfor_all_rings
drm/i915: initring->idearlyQuoted 8 lines
drm/i915/bdw: implement semaphore signal
drm/i915/bdw: implement semaphore wait
drm/i915:FORCE_RESTOREfor gen8 semaphores
drm/i915/bdw: poll semaphores
drm/i915: Extract semaphore error collection
drm/i915/bdw: collect semaphore error state
drm/i915: unleash semaphores on gen8
drm/i915: semaphore debugfsQuoted 6 lines
By the end, don't you use a mix of tables and formula for writing the offsets for the wait/signal commands? Looks very inconsistent when there is a very simple routine for generating the appropriate semaphore slot given (waiter, signaller).
-ChrisQuoted 6 lines
Excluding debugfs, which was left intentionally that way...
The only inconsistency, I think was in the error state capture, right? That was a last minute addition probably after I should have quit for the day. Do you see something other than error state (and debugfs)? I'll discuss the error state stuff with on the patch itself.
Quoted 5 lines
The error state and signaller use the table, but the waiter uses the offset calculation. And debugfs does its own compact thing (which is ideal for neatly formating the table.).
perhaps
That's not new to the series.
Quoted 10 lines
#define
GEN8_SEMAPHORE(signaller, waiter)\
(i915_gem_obj_ggtt_offset(dev_priv->semaphore_obj)+ \
(signaller *I915_NUM_RINGS+ waiter) *SEQNO_SIZE)#define
GEN8_WAIT_OFFSET(from)GEN8_SEMAPHORE(from, ring->id)#defineGEN8_SIGNAL_OFFSET(to)GEN8_SEMAPHORE(ring->id, to)would make it clearer what I mean.
-Chris
Well, the other half is not currently gen specific, and I liked keeping it that way.
In either case, the fix on top is quite simple. Patches welcome :-)
Quoted 3 lines
Signature · 2 lines
-- Chris Wilson, Intel Open Source Technology Centre
Signature · 1 line
Ben Widawsky, Intel Open Source Technology Center