Skip to contentSkip to conversation

Broadwell HW semaphore

PATCH In review Ben Widawsky 5 participants 32 messages Dec 17, 2013

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v2 cover Broadwell HW semaphore

Reposting this as a new series since two of the patches dropped off since last time.

Functionally it's the same as before. Like before, the patch "drm/i915:
unleash semaphores on gen8" should probably not be merged as it's not 100% clear where the hang is currently coming from. Everything else should be pretty benign for other platforms.

Ben Widawsky (15):
drm/i915: Reorder/respace MI instruction definition drm/i915: Don't emit mbox updates without semaphores drm/i915: Move semaphore specific ring members to struct drm/i915: Virtualize the ringbuffer signal func drm/i915: Move ring_begin to signal()
drm/i915: Make semaphore updates more precise drm/i915: gen specific ring init
drm/i915/bdw: implement semaphore signal drm/i915/bdw: implement semaphore wait drm/i915: FORCE_RESTORE for gen8 semaphores drm/i915/bdw: poll semaphores
drm/i915: Extract semaphore error collection drm/i915/bdw: collect semaphore error state drm/i915: unleash semaphores on gen8
drm/i915: semaphore debugfs

 drivers/gpu/drm/i915/i915_debugfs.c     |  69 +++++++
 drivers/gpu/drm/i915/i915_drv.c         |   6 -
 drivers/gpu/drm/i915/i915_drv.h         |   2 +
 drivers/gpu/drm/i915/i915_gem.c         |  10 +-
 drivers/gpu/drm/i915/i915_gem_context.c |   9 +
 drivers/gpu/drm/i915/i915_gpu_error.c   |  75 ++++++--
 drivers/gpu/drm/i915/i915_reg.h         |  58 +++---
 drivers/gpu/drm/i915/intel_ringbuffer.c | 329 ++++++++++++++++++++++++--------
 drivers/gpu/drm/i915/intel_ringbuffer.h |  87 ++++++++-
 9 files changed, 508 insertions(+), 137 deletions(-)
Signature · 1 line
1.8.5.1
#1 lore raw

PATCH v2 1/15 drm/i915: Reorder/respace MI instruction definition

A few command were out of numerical order and had different spacing. Put them back in numerical order, with proper spacing.

---
 drivers/gpu/drm/i915/i915_reg.h | 52 ++++++++++++++++++++---------------------
 1 file changed, 26 insertions(+), 26 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +26 -26
index f1eece4..ac87ab8 100644
@@ -193,10 +193,13 @@
 #define   MI_SCENE_COUNT	(1 << 3) /* just increment scene count */
 #define   MI_END_SCENE		(1 << 4) /* flush binner and incr scene count */
 #define   MI_INVALIDATE_ISP	(1 << 5) /* invalidate indirect state pointers */
+#define MI_REPORT_HEAD		MI_INSTR(0x07, 0)
+#define MI_ARB_ON_OFF		MI_INSTR(0x08, 0)
+#define   MI_ARB_ENABLE			(1<<0)
+#define   MI_ARB_DISABLE		(0<<0)
 #define MI_BATCH_BUFFER_END	MI_INSTR(0x0a, 0)
 #define MI_SUSPEND_FLUSH	MI_INSTR(0x0b, 0)
 #define   MI_SUSPEND_FLUSH_EN	(1<<0)
-#define MI_REPORT_HEAD		MI_INSTR(0x07, 0)
 #define MI_OVERLAY_FLIP		MI_INSTR(0x11, 0)
 #define   MI_OVERLAY_CONTINUE	(0x0<<21)
 #define   MI_OVERLAY_ON		(0x1<<21)
@@ -212,10 +215,24 @@
 #define   MI_DISPLAY_FLIP_IVB_SPRITE_B (3 << 19)
 #define   MI_DISPLAY_FLIP_IVB_PLANE_C  (4 << 19)
 #define   MI_DISPLAY_FLIP_IVB_SPRITE_C (5 << 19)
-#define MI_ARB_ON_OFF		MI_INSTR(0x08, 0)
-#define   MI_ARB_ENABLE			(1<<0)
-#define   MI_ARB_DISABLE		(0<<0)
-
+#define MI_SEMAPHORE_MBOX	MI_INSTR(0x16, 1) /* gen6+ */
+#define   MI_SEMAPHORE_GLOBAL_GTT    (1<<22)
+#define   MI_SEMAPHORE_UPDATE	    (1<<21)
+#define   MI_SEMAPHORE_COMPARE	    (1<<20)
+#define   MI_SEMAPHORE_REGISTER	    (1<<18)
+#define   MI_SEMAPHORE_SYNC_VR	    (0<<16) /* RCS  wait for VCS  (RVSYNC) */
+#define   MI_SEMAPHORE_SYNC_VER	    (1<<16) /* RCS  wait for VECS (RVESYNC) */
+#define   MI_SEMAPHORE_SYNC_BR	    (2<<16) /* RCS  wait for BCS  (RBSYNC) */
+#define   MI_SEMAPHORE_SYNC_BV	    (0<<16) /* VCS  wait for BCS  (VBSYNC) */
+#define   MI_SEMAPHORE_SYNC_VEV	    (1<<16) /* VCS  wait for VECS (VVESYNC) */
+#define   MI_SEMAPHORE_SYNC_RV	    (2<<16) /* VCS  wait for RCS  (VRSYNC) */
+#define   MI_SEMAPHORE_SYNC_RB	    (0<<16) /* BCS  wait for RCS  (BRSYNC) */
+#define   MI_SEMAPHORE_SYNC_VEB	    (1<<16) /* BCS  wait for VECS (BVESYNC) */
+#define   MI_SEMAPHORE_SYNC_VB	    (2<<16) /* BCS  wait for VCS  (BVSYNC) */
+#define   MI_SEMAPHORE_SYNC_BVE	    (0<<16) /* VECS wait for BCS  (VEBSYNC) */
+#define   MI_SEMAPHORE_SYNC_VVE	    (1<<16) /* VECS wait for VCS  (VEVSYNC) */
+#define   MI_SEMAPHORE_SYNC_RVE	    (2<<16) /* VECS wait for RCS  (VERSYNC) */
+#define   MI_SEMAPHORE_SYNC_INVALID  (3<<16)
 #define MI_SET_CONTEXT		MI_INSTR(0x18, 0)
 #define   MI_MM_SPACE_GTT		(1<<8)
 #define   MI_MM_SPACE_PHYSICAL		(0<<8)
@@ -235,7 +252,7 @@
  */
 #define MI_LOAD_REGISTER_IMM(x)	MI_INSTR(0x22, 2*x-1)
 #define MI_STORE_REGISTER_MEM(x) MI_INSTR(0x24, 2*x-1)
-#define  MI_SRM_LRM_GLOBAL_GTT		(1<<22)
+#define   MI_SRM_LRM_GLOBAL_GTT		(1<<22)
 #define MI_FLUSH_DW		MI_INSTR(0x26, 1) /* for GEN6 */
 #define   MI_FLUSH_DW_STORE_INDEX	(1<<21)
 #define   MI_INVALIDATE_TLB		(1<<18)
@@ -246,30 +263,13 @@
 #define MI_BATCH_BUFFER		MI_INSTR(0x30, 1)
 #define   MI_BATCH_NON_SECURE		(1)
 /* for snb/ivb/vlv this also means "batch in ppgtt" when ppgtt is enabled. */
-#define   MI_BATCH_NON_SECURE_I965 	(1<<8)
+#define   MI_BATCH_NON_SECURE_I965	(1<<8)
 #define   MI_BATCH_PPGTT_HSW		(1<<8)
-#define   MI_BATCH_NON_SECURE_HSW 	(1<<13)
+#define   MI_BATCH_NON_SECURE_HSW	(1<<13)
 #define MI_BATCH_BUFFER_START	MI_INSTR(0x31, 0)
 #define   MI_BATCH_GTT		    (2<<6) /* aliased with (1<<7) on gen4 */
 #define MI_BATCH_BUFFER_START_GEN8	MI_INSTR(0x31, 1)
-#define MI_SEMAPHORE_MBOX	MI_INSTR(0x16, 1) /* gen6+ */
-#define  MI_SEMAPHORE_GLOBAL_GTT    (1<<22)
-#define  MI_SEMAPHORE_UPDATE	    (1<<21)
-#define  MI_SEMAPHORE_COMPARE	    (1<<20)
-#define  MI_SEMAPHORE_REGISTER	    (1<<18)
-#define  MI_SEMAPHORE_SYNC_VR	    (0<<16) /* RCS  wait for VCS  (RVSYNC) */
-#define  MI_SEMAPHORE_SYNC_VER	    (1<<16) /* RCS  wait for VECS (RVESYNC) */
-#define  MI_SEMAPHORE_SYNC_BR	    (2<<16) /* RCS  wait for BCS  (RBSYNC) */
-#define  MI_SEMAPHORE_SYNC_BV	    (0<<16) /* VCS  wait for BCS  (VBSYNC) */
-#define  MI_SEMAPHORE_SYNC_VEV	    (1<<16) /* VCS  wait for VECS (VVESYNC) */
-#define  MI_SEMAPHORE_SYNC_RV	    (2<<16) /* VCS  wait for RCS  (VRSYNC) */
-#define  MI_SEMAPHORE_SYNC_RB	    (0<<16) /* BCS  wait for RCS  (BRSYNC) */
-#define  MI_SEMAPHORE_SYNC_VEB	    (1<<16) /* BCS  wait for VECS (BVESYNC) */
-#define  MI_SEMAPHORE_SYNC_VB	    (2<<16) /* BCS  wait for VCS  (BVSYNC) */
-#define  MI_SEMAPHORE_SYNC_BVE	    (0<<16) /* VECS wait for BCS  (VEBSYNC) */
-#define  MI_SEMAPHORE_SYNC_VVE	    (1<<16) /* VECS wait for VCS  (VEVSYNC) */
-#define  MI_SEMAPHORE_SYNC_RVE	    (2<<16) /* VECS wait for RCS  (VERSYNC) */
-#define  MI_SEMAPHORE_SYNC_INVALID  (3<<16)
+
 
 #define MI_PREDICATE_RESULT_2	(0x2214)
 #define  LOWER_SLICE_ENABLED	(1<<0)
Signature · 1 line
1.8.5.1
#2 lore raw

PATCH 1/1 drm/i915: Make semaphore modparam RO

A couple patches in the upcoming rework of semaphores will break if semaphores are toggled by the user at various times. Since the code cleanups there seem to be an overall win, and toggling semaphores at runtime is not a terribly useful thing to do, simply make the module parameter read-only.

Cc Daniel Vetter <[email protected]>
Cc Chris Wilson <[email protected]>
---
 drivers/gpu/drm/i915/i915_drv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/i915_drv.c +1 -1
index 23f8217..2527d4a 100644
@@ -59,7 +59,7 @@ MODULE_PARM_DESC(powersave,
 		"Enable powersavings, fbc, downclocking, etc. (default: true)");
 
 int i915_semaphores __read_mostly = -1;
-module_param_named(semaphores, i915_semaphores, int, 0600);
+module_param_named(semaphores, i915_semaphores, int, 0400);
 MODULE_PARM_DESC(semaphores,
 		"Use semaphores for inter-ring sync (default: -1 (use per-chip defaults))");
 
Signature · 1 line
1.8.5.1
#3 lore raw

PATCH v2 2/15 drm/i915: Don't emit mbox updates without semaphores

In reply to Ben Widawsky

Aside from the fact that it leaves confusing dumps on error capture, it is entirely unnecessary, and potentially harmful in cases like BDW, where the instruction has changed.

In reality (seemingly), this will have no behavioral impact.

---
 drivers/gpu/drm/i915/intel_ringbuffer.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/intel_ringbuffer.c +6 -5
index e05a021..b106984 100644
@@ -663,14 +663,15 @@ gen6_add_request(struct intel_ring_buffer *ring)
 	struct drm_device *dev = ring->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_ring_buffer *useless;
-	int i, ret;
+	int i, ret, num_dwords = 4;
 
-	ret = intel_ring_begin(ring, ((I915_NUM_RINGS-1) *
-				      MBOX_UPDATE_DWORDS) +
-				      4);
+	if (i915_semaphore_is_enabled(dev))
+		num_dwords += ((I915_NUM_RINGS-1) * MBOX_UPDATE_DWORDS);
+#undef MBOX_UPDATE_DWORDS
+
+	ret = intel_ring_begin(ring, num_dwords);
 	if (ret)
 		return ret;
-#undef MBOX_UPDATE_DWORDS
 
 	for_each_ring(useless, dev_priv, i) {
 		u32 mbox_reg = ring->signal_mbox[i];
Signature · 1 line
1.8.5.1
#4 lore raw

Re: [PATCH 02/15] drm/i915: Don't emit mbox updates without semaphores

Quoted 7 lines · Ben Widawsky

Aside from the fact that it leaves confusing dumps on error capture, it is entirely unnecessary, and potentially harmful in cases like BDW, where the instruction has changed.

In reality (seemingly), this will have no behavioral impact.

The reason why we currently do is because i915.semaphores can change at runtime. So we emit the instructions whilst i915.semaphores=0 just in case, it is enabled later. This restriction can be lifted with a little more work in handling the missed semaphores, I think, or it may just require a proof that everything is safe as is.
-Chris

Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre
#5 lore raw

Re: [PATCH 02/15] drm/i915: Don't emit mbox updates without semaphores

Quoted 7 lines · Chris Wilson
Quoted 6 lines · Ben Widawsky

Aside from the fact that it leaves confusing dumps on error capture, it is entirely unnecessary, and potentially harmful in cases like BDW, where the instruction has changed.

In reality (seemingly), this will have no behavioral impact.

Quoted 9 lines
Quoted 1 line

The reason why we currently do is because i915.semaphores can change at runtime. So we emit the instructions whilst i915.semaphores=0 just in case, it is enabled later. This restriction can be lifted with a little more work in handling the missed semaphores, I think, or it may just require a proof that everything is safe as is.
-Chris

It should still check the module parameter - I guess it would be nice to guard changing the module parameter with struct_mutex (generally, not just here), as that also breaks the emit path.

So in short, I think it's broken for two reasons.

My (and Daniel's) vote is to just make the module param static.

Signature · 1 line
Ben Widawsky, Intel Open Source Technology Center
#6 lore raw

Re: [PATCH 02/15] drm/i915: Don't emit mbox updates without semaphores

Quoted 19 lines · Ben Widawsky
Quoted 7 lines · Chris Wilson
Quoted 6 lines · Ben Widawsky

Aside from the fact that it leaves confusing dumps on error capture, it is entirely unnecessary, and potentially harmful in cases like BDW, where the instruction has changed.

In reality (seemingly), this will have no behavioral impact.

Quoted 9 lines
Quoted 1 line

The reason why we currently do is because i915.semaphores can change at runtime. So we emit the instructions whilst i915.semaphores=0 just in case, it is enabled later. This restriction can be lifted with a little more work in handling the missed semaphores, I think, or it may just require a proof that everything is safe as is.
-Chris

Quoted 7 lines

It should still check the module parameter - I guess it would be nice to guard changing the module parameter with struct_mutex (generally, not just here), as that also breaks the emit path.

So in short, I think it's broken for two reasons.

My (and Daniel's) vote is to just make the module param static.

Dynamic i915.semaphores is something I can live happily without. If we ever do need such a thing, it needs to be internal to the kernel. -Chris

Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre
#7 lore raw

PATCH v2 3/15 drm/i915: Move semaphore specific ring members to struct

In reply to Ben Widawsky

This will be helpful in abstracting some of the code in preparation for gen8 semaphores.

---
 drivers/gpu/drm/i915/i915_gem.c         | 10 ++--
 drivers/gpu/drm/i915/i915_gpu_error.c   |  6 +--
 drivers/gpu/drm/i915/intel_ringbuffer.c | 84 ++++++++++++++++-----------------
 drivers/gpu/drm/i915/intel_ringbuffer.h | 17 ++++---
 4 files changed, 60 insertions(+), 57 deletions(-)
drivers/gpu/drm/i915/i915_gem.c +5 -5
index 32636a4..628489a 100644
@@ -2078,8 +2078,8 @@ i915_gem_init_seqno(struct drm_device *dev, u32 seqno)
 	for_each_ring(ring, dev_priv, i) {
 		intel_ring_init_seqno(ring, seqno);
 
-		for (j = 0; j < ARRAY_SIZE(ring->sync_seqno); j++)
-			ring->sync_seqno[j] = 0;
+		for (j = 0; j < ARRAY_SIZE(ring->semaphore.sync_seqno); j++)
+			ring->semaphore.sync_seqno[j] = 0;
 	}
 
 	return 0;
@@ -2697,7 +2697,7 @@ i915_gem_object_sync(struct drm_i915_gem_object *obj,
 	idx = intel_ring_sync_index(from, to);
 
 	seqno = obj->last_read_seqno;
-	if (seqno <= from->sync_seqno[idx])
+	if (seqno <= from->semaphore.sync_seqno[idx])
 		return 0;
 
 	ret = i915_gem_check_olr(obj->ring, seqno);
@@ -2705,13 +2705,13 @@ i915_gem_object_sync(struct drm_i915_gem_object *obj,
 		return ret;
 
 	trace_i915_gem_ring_sync_to(from, to, seqno);
-	ret = to->sync_to(to, from, seqno);
+	ret = to->semaphore.sync_to(to, from, seqno);
 	if (!ret)
 		/* We use last_read_seqno because sync_to()
 		 * might have just caused seqno wrap under
 		 * the radar.
 		 */
-		from->sync_seqno[idx] = obj->last_read_seqno;
+		from->semaphore.sync_seqno[idx] = obj->last_read_seqno;
 
 	return ret;
 }
drivers/gpu/drm/i915/i915_gpu_error.c +3 -3
index a707cca..a577640 100644
@@ -708,14 +708,14 @@ static void i915_record_ring_state(struct drm_device *dev,
 			= I915_READ(RING_SYNC_0(ring->mmio_base));
 		error->semaphore_mboxes[ring->id][1]
 			= I915_READ(RING_SYNC_1(ring->mmio_base));
-		error->semaphore_seqno[ring->id][0] = ring->sync_seqno[0];
-		error->semaphore_seqno[ring->id][1] = ring->sync_seqno[1];
+		error->semaphore_seqno[ring->id][0] = ring->semaphore.sync_seqno[0];
+		error->semaphore_seqno[ring->id][1] = ring->semaphore.sync_seqno[1];
 	}
 
 	if (HAS_VEBOX(dev)) {
 		error->semaphore_mboxes[ring->id][2] =
 			I915_READ(RING_SYNC_2(ring->mmio_base));
-		error->semaphore_seqno[ring->id][2] = ring->sync_seqno[2];
+		error->semaphore_seqno[ring->id][2] = ring->semaphore.sync_seqno[2];
 	}
 
 	if (INTEL_INFO(dev)->gen >= 4) {
drivers/gpu/drm/i915/intel_ringbuffer.c +42 -42

132 lines not on this page · raw message

drivers/gpu/drm/i915/intel_ringbuffer.h +10 -7
index 71a73f4..b5fc768 100644
@@ -83,7 +83,6 @@ struct  intel_ring_buffer {
 	unsigned irq_refcount; /* protected by dev_priv->irq_lock */
 	u32		irq_enable_mask;	/* bitmask to enable ring interrupt */
 	u32		trace_irq_seqno;
-	u32		sync_seqno[I915_NUM_RINGS-1];
 	bool __must_check (*irq_get)(struct intel_ring_buffer *ring);
 	void		(*irq_put)(struct intel_ring_buffer *ring);
 
@@ -111,14 +110,18 @@ struct  intel_ring_buffer {
 #define I915_DISPATCH_SECURE 0x1
 #define I915_DISPATCH_PINNED 0x2
 	void		(*cleanup)(struct intel_ring_buffer *ring);
-	int		(*sync_to)(struct intel_ring_buffer *ring,
+
+	struct {
+		u32	sync_seqno[I915_NUM_RINGS-1];
+		/* AKA wait() */
+		int	(*sync_to)(struct intel_ring_buffer *ring,
 				   struct intel_ring_buffer *to,
 				   u32 seqno);
-
-	/* our mbox written by others */
-	u32		semaphore_register[I915_NUM_RINGS];
-	/* mboxes this ring signals to */
-	u32		signal_mbox[I915_NUM_RINGS];
+		/* our mbox written by others */
+		u32		mbox[I915_NUM_RINGS];
+		/* mboxes this ring signals to */
+		u32		signal_mbox[I915_NUM_RINGS];
+	} semaphore;
 
 	/**
 	 * List of objects currently involved in rendering from the
Signature · 1 line
1.8.5.1
#8 lore raw

PATCH v2 4/15 drm/i915: Virtualize the ringbuffer signal func

In reply to Ben Widawsky

This abstraction again is in preparation for gen8. Gen8 will bring new semantics for doing this operation.

While here, make the writes of MI_NOOPs explicit for non-existent rings. This should have been implicit before.

NOTE: This is going to be removed in a few patches.

---
 drivers/gpu/drm/i915/intel_ringbuffer.c | 40 ++++++++++++++++++++-------------
 drivers/gpu/drm/i915/intel_ringbuffer.h |  2 ++
 2 files changed, 27 insertions(+), 15 deletions(-)
drivers/gpu/drm/i915/intel_ringbuffer.c +25 -15
index cc75205..e638ff1 100644
@@ -632,20 +632,32 @@ static void render_ring_cleanup(struct intel_ring_buffer *ring)
 	ring->scratch.obj = NULL;
 }
 
-static void
-update_mboxes(struct intel_ring_buffer *ring,
-	      u32 mmio_offset)
+static void gen6_signal(struct intel_ring_buffer *signaller)
 {
+	struct drm_i915_private *dev_priv = signaller->dev->dev_private;
+	struct intel_ring_buffer *useless;
+	int i;
+
 /* NB: In order to be able to do semaphore MBOX updates for varying number
  * of rings, it's easiest if we round up each individual update to a
  * multiple of 2 (since ring updates must always be a multiple of 2)
  * even though the actual update only requires 3 dwords.
  */
 #define MBOX_UPDATE_DWORDS 4
-	intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
-	intel_ring_emit(ring, mmio_offset);
-	intel_ring_emit(ring, ring->outstanding_lazy_seqno);
-	intel_ring_emit(ring, MI_NOOP);
+	for_each_ring(useless, dev_priv, i) {
+		u32 mbox_reg = signaller->semaphore.signal_mbox[i];
+		if (mbox_reg != GEN6_NOSYNC) {
+			intel_ring_emit(signaller, MI_LOAD_REGISTER_IMM(1));
+			intel_ring_emit(signaller, mbox_reg);
+			intel_ring_emit(signaller, signaller->outstanding_lazy_seqno);
+			intel_ring_emit(signaller, MI_NOOP);
+		} else {
+			intel_ring_emit(signaller, MI_NOOP);
+			intel_ring_emit(signaller, MI_NOOP);
+			intel_ring_emit(signaller, MI_NOOP);
+			intel_ring_emit(signaller, MI_NOOP);
+		}
+	}
 }
 
 /**
@@ -661,9 +673,7 @@ static int
 gen6_add_request(struct intel_ring_buffer *ring)
 {
 	struct drm_device *dev = ring->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_ring_buffer *useless;
-	int i, ret, num_dwords = 4;
+	int ret, num_dwords = 4;
 
 	if (i915_semaphore_is_enabled(dev))
 		num_dwords += ((I915_NUM_RINGS-1) * MBOX_UPDATE_DWORDS);
@@ -673,11 +683,7 @@ gen6_add_request(struct intel_ring_buffer *ring)
 	if (ret)
 		return ret;
 
-	for_each_ring(useless, dev_priv, i) {
-		u32 mbox_reg = ring->semaphore.signal_mbox[i];
-		if (mbox_reg != GEN6_NOSYNC)
-			update_mboxes(ring, mbox_reg);
-	}
+	ring->semaphore.signal(ring);
 
 	intel_ring_emit(ring, MI_STORE_DWORD_INDEX);
 	intel_ring_emit(ring, I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
@@ -1866,6 +1872,7 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
 		ring->get_seqno = gen6_ring_get_seqno;
 		ring->set_seqno = ring_set_seqno;
 		ring->semaphore.sync_to = gen6_ring_sync;
+		ring->semaphore.signal = gen6_signal;
 		ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_INVALID;
 		ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_RV;
 		ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_RB;
@@ -2042,6 +2049,7 @@ int intel_init_bsd_ring_buffer(struct drm_device *dev)
 				gen6_ring_dispatch_execbuffer;
 		}
 		ring->semaphore.sync_to = gen6_ring_sync;
+		ring->semaphore.signal = gen6_signal;
 		ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_VR;
 		ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_INVALID;
 		ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_VB;
@@ -2099,6 +2107,7 @@ int intel_init_blt_ring_buffer(struct drm_device *dev)
 		ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer;
 	}
 	ring->semaphore.sync_to = gen6_ring_sync;
+	ring->semaphore.signal = gen6_signal;
 	ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_BR;
 	ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_BV;
 	ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_INVALID;
@@ -2140,6 +2149,7 @@ int intel_init_vebox_ring_buffer(struct drm_device *dev)
 		ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer;
 	}
 	ring->semaphore.sync_to = gen6_ring_sync;
+	ring->semaphore.signal = gen6_signal;
 	ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_VER;
 	ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_VEV;
 	ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_VEB;
drivers/gpu/drm/i915/intel_ringbuffer.h +2 -0
index b5fc768..e01a1ff 100644
@@ -121,6 +121,8 @@ struct  intel_ring_buffer {
 		u32		mbox[I915_NUM_RINGS];
 		/* mboxes this ring signals to */
 		u32		signal_mbox[I915_NUM_RINGS];
+
+		void		(*signal)(struct intel_ring_buffer *signaller);
 	} semaphore;
 
 	/**
Signature · 1 line
1.8.5.1
#9 lore raw

PATCH v2 5/15 drm/i915: Move ring_begin to signal()

In reply to Ben Widawsky

Add_request has always contained both the semaphore mailbox updates as well as the breadcrumb writes. Since the semaphore signal is the one which actually knows about the number of dwords it needs to emit to the ring, we move the ring_begin to that function. This allows us to remove the hideously shared #define

On a related not, gen8 will use a different number of dwords for semaphores, but not for add request.

v2: Make number of dwords an explicit part of signalling (via function argument). (Chris)

---
 drivers/gpu/drm/i915/intel_ringbuffer.c | 39 +++++++++++++++++++--------------
 drivers/gpu/drm/i915/intel_ringbuffer.h |  4 +++-
 2 files changed, 25 insertions(+), 18 deletions(-)
drivers/gpu/drm/i915/intel_ringbuffer.c +22 -17
index e638ff1..42dbbf8 100644
@@ -632,18 +632,28 @@ static void render_ring_cleanup(struct intel_ring_buffer *ring)
 	ring->scratch.obj = NULL;
 }
 
-static void gen6_signal(struct intel_ring_buffer *signaller)
+static int gen6_signal(struct intel_ring_buffer *signaller,
+		       unsigned int num_dwords)
 {
-	struct drm_i915_private *dev_priv = signaller->dev->dev_private;
+	struct drm_device *dev = signaller->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_ring_buffer *useless;
-	int i;
+	int i, ret;
 
-/* NB: In order to be able to do semaphore MBOX updates for varying number
- * of rings, it's easiest if we round up each individual update to a
- * multiple of 2 (since ring updates must always be a multiple of 2)
- * even though the actual update only requires 3 dwords.
- */
+	/* NB: In order to be able to do semaphore MBOX updates for varying
+	 * number of rings, it's easiest if we round up each individual update
+	 * to a multiple of 2 (since ring updates must always be a multiple of
+	 * 2) even though the actual update only requires 3 dwords.
+	 */
 #define MBOX_UPDATE_DWORDS 4
+	if (i915_semaphore_is_enabled(dev))
+		num_dwords += ((I915_NUM_RINGS-1) * MBOX_UPDATE_DWORDS);
+
+	ret = intel_ring_begin(signaller, num_dwords);
+	if (ret)
+		return ret;
+#undef MBOX_UPDATE_DWORDS
+
 	for_each_ring(useless, dev_priv, i) {
 		u32 mbox_reg = signaller->semaphore.signal_mbox[i];
 		if (mbox_reg != GEN6_NOSYNC) {
@@ -658,6 +668,8 @@ static void gen6_signal(struct intel_ring_buffer *signaller)
 			intel_ring_emit(signaller, MI_NOOP);
 		}
 	}
+
+	return 0;
 }
 
 /**
@@ -672,19 +684,12 @@ static void gen6_signal(struct intel_ring_buffer *signaller)
 static int
 gen6_add_request(struct intel_ring_buffer *ring)
 {
-	struct drm_device *dev = ring->dev;
-	int ret, num_dwords = 4;
-
-	if (i915_semaphore_is_enabled(dev))
-		num_dwords += ((I915_NUM_RINGS-1) * MBOX_UPDATE_DWORDS);
-#undef MBOX_UPDATE_DWORDS
+	int ret;
 
-	ret = intel_ring_begin(ring, num_dwords);
+	ret = ring->semaphore.signal(ring, 4);
 	if (ret)
 		return ret;
 
-	ring->semaphore.signal(ring);
-
 	intel_ring_emit(ring, MI_STORE_DWORD_INDEX);
 	intel_ring_emit(ring, I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
 	intel_ring_emit(ring, ring->outstanding_lazy_seqno);
drivers/gpu/drm/i915/intel_ringbuffer.h +3 -1
index e01a1ff..c69ae10 100644
@@ -122,7 +122,9 @@ struct  intel_ring_buffer {
 		/* mboxes this ring signals to */
 		u32		signal_mbox[I915_NUM_RINGS];
 
-		void		(*signal)(struct intel_ring_buffer *signaller);
+		/* num_dwords is space the caller will need for atomic update */
+		int		(*signal)(struct intel_ring_buffer *signaller,
+					  unsigned int num_dwords);
 	} semaphore;
 
 	/**
Signature · 1 line
1.8.5.1
#10 lore raw

PATCH v2 6/15 drm/i915: Make semaphore updates more precise

In reply to Ben Widawsky

With the ring mask we now have an easy way to know the number of rings in the system, and therefore can accurately predict the number of dwords to emit for semaphore signalling. This was not possible (easily) previously.

There should be no functional impact, simply fewer instructions emitted.

While we're here, simply do the round up to 2 instead of the fancier rounding we did before, which rounding up per mbox, ie 4.

---
 drivers/gpu/drm/i915/intel_ringbuffer.c | 43 +++++++++++++++++----------------
 1 file changed, 22 insertions(+), 21 deletions(-)
drivers/gpu/drm/i915/intel_ringbuffer.c +22 -21
index 42dbbf8..7a8c5d8 100644
@@ -635,24 +635,20 @@ static void render_ring_cleanup(struct intel_ring_buffer *ring)
 static int gen6_signal(struct intel_ring_buffer *signaller,
 		       unsigned int num_dwords)
 {
+#define MBOX_UPDATE_DWORDS 4
 	struct drm_device *dev = signaller->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_ring_buffer *useless;
-	int i, ret;
+	int i, ret, num_rings;
 
-	/* NB: In order to be able to do semaphore MBOX updates for varying
-	 * number of rings, it's easiest if we round up each individual update
-	 * to a multiple of 2 (since ring updates must always be a multiple of
-	 * 2) even though the actual update only requires 3 dwords.
-	 */
-#define MBOX_UPDATE_DWORDS 4
-	if (i915_semaphore_is_enabled(dev))
-		num_dwords += ((I915_NUM_RINGS-1) * MBOX_UPDATE_DWORDS);
+	num_rings = hweight_long(INTEL_INFO(dev)->ring_mask);
+	num_dwords = round_up((num_rings-1) * MBOX_UPDATE_DWORDS, 2);
+#undef MBOX_UPDATE_DWORDS
 
-	ret = intel_ring_begin(signaller, num_dwords);
+	/* XXX: + 4 for the caller */
+	ret = intel_ring_begin(signaller, num_dwords + 4);
 	if (ret)
 		return ret;
-#undef MBOX_UPDATE_DWORDS
 
 	for_each_ring(useless, dev_priv, i) {
 		u32 mbox_reg = signaller->semaphore.signal_mbox[i];
@@ -661,14 +657,11 @@ static int gen6_signal(struct intel_ring_buffer *signaller,
 			intel_ring_emit(signaller, mbox_reg);
 			intel_ring_emit(signaller, signaller->outstanding_lazy_seqno);
 			intel_ring_emit(signaller, MI_NOOP);
-		} else {
-			intel_ring_emit(signaller, MI_NOOP);
-			intel_ring_emit(signaller, MI_NOOP);
-			intel_ring_emit(signaller, MI_NOOP);
-			intel_ring_emit(signaller, MI_NOOP);
 		}
 	}
 
+	WARN_ON(i != num_rings);
+
 	return 0;
 }
 
@@ -686,7 +679,11 @@ gen6_add_request(struct intel_ring_buffer *ring)
 {
 	int ret;
 
-	ret = ring->semaphore.signal(ring, 4);
+	if (ring->semaphore.signal)
+		ret = ring->semaphore.signal(ring, 4);
+	else
+		ret = intel_ring_begin(ring, 4);
+
 	if (ret)
 		return ret;
 
@@ -1877,7 +1874,8 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
 		ring->get_seqno = gen6_ring_get_seqno;
 		ring->set_seqno = ring_set_seqno;
 		ring->semaphore.sync_to = gen6_ring_sync;
-		ring->semaphore.signal = gen6_signal;
+		if (i915_semaphore_is_enabled(dev))
+			ring->semaphore.signal = gen6_signal;
 		ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_INVALID;
 		ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_RV;
 		ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_RB;
@@ -2054,7 +2052,8 @@ int intel_init_bsd_ring_buffer(struct drm_device *dev)
 				gen6_ring_dispatch_execbuffer;
 		}
 		ring->semaphore.sync_to = gen6_ring_sync;
-		ring->semaphore.signal = gen6_signal;
+		if (i915_semaphore_is_enabled(dev))
+			ring->semaphore.signal = gen6_signal;
 		ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_VR;
 		ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_INVALID;
 		ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_VB;
@@ -2112,7 +2111,8 @@ int intel_init_blt_ring_buffer(struct drm_device *dev)
 		ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer;
 	}
 	ring->semaphore.sync_to = gen6_ring_sync;
-	ring->semaphore.signal = gen6_signal;
+	if (i915_semaphore_is_enabled(dev))
+		ring->semaphore.signal = gen6_signal;
 	ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_BR;
 	ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_BV;
 	ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_INVALID;
@@ -2154,7 +2154,8 @@ int intel_init_vebox_ring_buffer(struct drm_device *dev)
 		ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer;
 	}
 	ring->semaphore.sync_to = gen6_ring_sync;
-	ring->semaphore.signal = gen6_signal;
+	if (i915_semaphore_is_enabled(dev))
+		ring->semaphore.signal = gen6_signal;
 	ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_VER;
 	ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_VEV;
 	ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_VEB;
Signature · 1 line
1.8.5.1
#11 lore raw

Re: [PATCH 06/15] drm/i915: Make semaphore updates more precise

drivers/gpu/drm/i915/intel_ringbuffer.c int intel_init_bsd_ring_buffer(struct drm_device *dev) · line 2056

Quoted 7 lines · Ben Widawsky
drivers/gpu/drm/i915/intel_ringbuffer.c +2 -1
@@ -2054,7 +2052,8 @@ int intel_init_bsd_ring_buffer(struct drm_device *dev)
 				gen6_ring_dispatch_execbuffer;
 		}
 		ring->semaphore.sync_to = gen6_ring_sync;
-		ring->semaphore.signal = gen6_signal;
+		if (i915_semaphore_is_enabled(dev))
+			ring->semaphore.signal = gen6_signal;

This is made more complicated as we allow changing i915.semaphores at runtime.
-Chris

Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre
#12 lore raw

PATCH v2 7/15 drm/i915: gen specific ring init

In reply to Ben Widawsky

Gen8 has already had some differentiation with how it handles rings. Semaphores bring yet more differences, and now is as good a time as any to do the split.

Also, since gen8 doesn't actually use semaphores up until this point, put the proper "NULL" values in for the mbox info.

v2: v1 had a stale commit message

---
 drivers/gpu/drm/i915/intel_ringbuffer.c | 134 ++++++++++++++++++++++----------
 1 file changed, 92 insertions(+), 42 deletions(-)
drivers/gpu/drm/i915/intel_ringbuffer.c +92 -42
index 7a8c5d8..db63a5c 100644
@@ -1857,19 +1857,33 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
 	ring->id = RCS;
 	ring->mmio_base = RENDER_RING_BASE;
 
-	if (INTEL_INFO(dev)->gen >= 6) {
+	if (INTEL_INFO(dev)->gen >= 8) {
+		ring->add_request = gen6_add_request;
+		ring->flush = gen8_render_ring_flush;
+		ring->irq_get = gen8_ring_get_irq;
+		ring->irq_put = gen8_ring_put_irq;
+		ring->irq_enable_mask = GT_RENDER_USER_INTERRUPT;
+		ring->get_seqno = gen6_ring_get_seqno;
+		ring->set_seqno = ring_set_seqno;
+		ring->semaphore.sync_to = gen6_ring_sync;
+		if (i915_semaphore_is_enabled(dev))
+			ring->semaphore.signal = gen6_signal;
+		ring->semaphore.signal = gen6_signal;
+		ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.mbox[VECS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.signal_mbox[RCS] = GEN6_NOSYNC;
+		ring->semaphore.signal_mbox[VCS] = GEN6_NOSYNC;
+		ring->semaphore.signal_mbox[BCS] = GEN6_NOSYNC;
+		ring->semaphore.signal_mbox[VECS] = GEN6_NOSYNC;
+	} else if (INTEL_INFO(dev)->gen >= 6) {
 		ring->add_request = gen6_add_request;
 		ring->flush = gen7_render_ring_flush;
 		if (INTEL_INFO(dev)->gen == 6)
 			ring->flush = gen6_render_ring_flush;
-		if (INTEL_INFO(dev)->gen >= 8) {
-			ring->flush = gen8_render_ring_flush;
-			ring->irq_get = gen8_ring_get_irq;
-			ring->irq_put = gen8_ring_put_irq;
-		} else {
-			ring->irq_get = gen6_ring_get_irq;
-			ring->irq_put = gen6_ring_put_irq;
-		}
+		ring->irq_get = gen6_ring_get_irq;
+		ring->irq_put = gen6_ring_put_irq;
 		ring->irq_enable_mask = GT_RENDER_USER_INTERRUPT;
 		ring->get_seqno = gen6_ring_get_seqno;
 		ring->set_seqno = ring_set_seqno;
@@ -1911,6 +1925,7 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
 		ring->irq_enable_mask = I915_USER_INTERRUPT;
 	}
 	ring->write_tail = ring_write_tail;
+
 	if (IS_HASWELL(dev))
 		ring->dispatch_execbuffer = hsw_ring_dispatch_execbuffer;
 	else if (IS_GEN8(dev))
@@ -2044,24 +2059,35 @@ int intel_init_bsd_ring_buffer(struct drm_device *dev)
 			ring->irq_put = gen8_ring_put_irq;
 			ring->dispatch_execbuffer =
 				gen8_ring_dispatch_execbuffer;
+			ring->semaphore.sync_to = gen6_ring_sync;
+			if (i915_semaphore_is_enabled(dev))
+				ring->semaphore.signal = gen6_signal;
+			ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_INVALID;
+			ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_INVALID;
+			ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_INVALID;
+			ring->semaphore.mbox[VECS] = MI_SEMAPHORE_SYNC_INVALID;
+			ring->semaphore.signal_mbox[RCS] = GEN6_NOSYNC;
+			ring->semaphore.signal_mbox[VCS] = GEN6_NOSYNC;
+			ring->semaphore.signal_mbox[BCS] = GEN6_NOSYNC;
+			ring->semaphore.signal_mbox[VECS] = GEN6_NOSYNC;
 		} else {
 			ring->irq_enable_mask = GT_BSD_USER_INTERRUPT;
 			ring->irq_get = gen6_ring_get_irq;
 			ring->irq_put = gen6_ring_put_irq;
 			ring->dispatch_execbuffer =
 				gen6_ring_dispatch_execbuffer;
+			ring->semaphore.sync_to = gen6_ring_sync;
+			if (i915_semaphore_is_enabled(dev))
+				ring->semaphore.signal = gen6_signal;
+			ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_VR;
+			ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_INVALID;
+			ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_VB;
+			ring->semaphore.mbox[VECS] = MI_SEMAPHORE_SYNC_VVE;
+			ring->semaphore.signal_mbox[RCS] = GEN6_RVSYNC;
+			ring->semaphore.signal_mbox[VCS] = GEN6_NOSYNC;
+			ring->semaphore.signal_mbox[BCS] = GEN6_BVSYNC;
+			ring->semaphore.signal_mbox[VECS] = GEN6_VEVSYNC;
 		}
-		ring->semaphore.sync_to = gen6_ring_sync;
-		if (i915_semaphore_is_enabled(dev))
-			ring->semaphore.signal = gen6_signal;
-		ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_VR;
-		ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_INVALID;
-		ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_VB;
-		ring->semaphore.mbox[VECS] = MI_SEMAPHORE_SYNC_VVE;
-		ring->semaphore.signal_mbox[RCS] = GEN6_RVSYNC;
-		ring->semaphore.signal_mbox[VCS] = GEN6_NOSYNC;
-		ring->semaphore.signal_mbox[BCS] = GEN6_BVSYNC;
-		ring->semaphore.signal_mbox[VECS] = GEN6_VEVSYNC;
 	} else {
 		ring->mmio_base = BSD_RING_BASE;
 		ring->flush = bsd_ring_flush;
@@ -2104,23 +2130,35 @@ int intel_init_blt_ring_buffer(struct drm_device *dev)
 		ring->irq_get = gen8_ring_get_irq;
 		ring->irq_put = gen8_ring_put_irq;
 		ring->dispatch_execbuffer = gen8_ring_dispatch_execbuffer;
+		ring->semaphore.sync_to = gen6_ring_sync;
+		if (i915_semaphore_is_enabled(dev))
+			ring->semaphore.signal = gen6_signal;
+		ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.mbox[VECS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.signal_mbox[RCS] = GEN6_NOSYNC;
+		ring->semaphore.signal_mbox[VCS] = GEN6_NOSYNC;
+		ring->semaphore.signal_mbox[BCS] = GEN6_NOSYNC;
+		ring->semaphore.signal_mbox[VECS] = GEN6_NOSYNC;
 	} else {
 		ring->irq_enable_mask = GT_BLT_USER_INTERRUPT;
 		ring->irq_get = gen6_ring_get_irq;
 		ring->irq_put = gen6_ring_put_irq;
 		ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer;
+		ring->semaphore.sync_to = gen6_ring_sync;
+		if (i915_semaphore_is_enabled(dev))
+			ring->semaphore.signal = gen6_signal;
+		ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_BR;
+		ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_BV;
+		ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.mbox[VECS] = MI_SEMAPHORE_SYNC_BVE;
+		ring->semaphore.signal_mbox[RCS] = GEN6_RBSYNC;
+		ring->semaphore.signal_mbox[VCS] = GEN6_VBSYNC;
+		ring->semaphore.signal_mbox[BCS] = GEN6_NOSYNC;
+		ring->semaphore.signal_mbox[VECS] = GEN6_VEBSYNC;
 	}
-	ring->semaphore.sync_to = gen6_ring_sync;
-	if (i915_semaphore_is_enabled(dev))
-		ring->semaphore.signal = gen6_signal;
-	ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_BR;
-	ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_BV;
-	ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_INVALID;
-	ring->semaphore.mbox[VECS] = MI_SEMAPHORE_SYNC_BVE;
-	ring->semaphore.signal_mbox[RCS] = GEN6_RBSYNC;
-	ring->semaphore.signal_mbox[VCS] = GEN6_VBSYNC;
-	ring->semaphore.signal_mbox[BCS] = GEN6_NOSYNC;
-	ring->semaphore.signal_mbox[VECS] = GEN6_VEBSYNC;
+
 	ring->init = init_ring_common;
 
 	return intel_init_ring_buffer(dev, ring);
@@ -2147,23 +2185,35 @@ int intel_init_vebox_ring_buffer(struct drm_device *dev)
 		ring->irq_get = gen8_ring_get_irq;
 		ring->irq_put = gen8_ring_put_irq;
 		ring->dispatch_execbuffer = gen8_ring_dispatch_execbuffer;
+		ring->semaphore.sync_to = gen6_ring_sync;
+		if (i915_semaphore_is_enabled(dev))
+			ring->semaphore.signal = gen6_signal;
+		ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.mbox[VECS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.signal_mbox[RCS] = GEN6_NOSYNC;
+		ring->semaphore.signal_mbox[VCS] = GEN6_NOSYNC;
+		ring->semaphore.signal_mbox[BCS] = GEN6_NOSYNC;
+		ring->semaphore.signal_mbox[VECS] = GEN6_NOSYNC;
 	} else {
 		ring->irq_enable_mask = PM_VEBOX_USER_INTERRUPT;
 		ring->irq_get = hsw_vebox_get_irq;
 		ring->irq_put = hsw_vebox_put_irq;
+		ring->semaphore.sync_to = gen6_ring_sync;
+		if (i915_semaphore_is_enabled(dev))
+			ring->semaphore.signal = gen6_signal;
+		ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_VER;
+		ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_VEV;
+		ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_VEB;
+		ring->semaphore.mbox[VECS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.signal_mbox[RCS] = GEN6_RVESYNC;
+		ring->semaphore.signal_mbox[VCS] = GEN6_VVESYNC;
+		ring->semaphore.signal_mbox[BCS] = GEN6_BVESYNC;
+		ring->semaphore.signal_mbox[VECS] = GEN6_NOSYNC;
 		ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer;
 	}
-	ring->semaphore.sync_to = gen6_ring_sync;
-	if (i915_semaphore_is_enabled(dev))
-		ring->semaphore.signal = gen6_signal;
-	ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_VER;
-	ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_VEV;
-	ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_VEB;
-	ring->semaphore.mbox[VECS] = MI_SEMAPHORE_SYNC_INVALID;
-	ring->semaphore.signal_mbox[RCS] = GEN6_RVESYNC;
-	ring->semaphore.signal_mbox[VCS] = GEN6_VVESYNC;
-	ring->semaphore.signal_mbox[BCS] = GEN6_BVESYNC;
-	ring->semaphore.signal_mbox[VECS] = GEN6_NOSYNC;
+
 	ring->init = init_ring_common;
 
 	return intel_init_ring_buffer(dev, ring);
Signature · 1 line
1.8.5.1
#13 lore raw

Re: [PATCH 07/15] drm/i915: gen specific ring init

Quoted 10 lines · Ben Widawsky

Gen8 has already had some differentiation with how it handles rings. Semaphores bring yet more differences, and now is as good a time as any to do the split.

Also, since gen8 doesn't actually use semaphores up until this point, put the proper "NULL" values in for the mbox info.

v2: v1 had a stale commit message

Subject should probably say "gen_8_ specific ring init" since for the render ring we already have gen specific stuff. I can do this color-adjustment when applying if nothing else pops up ;-) -Daniel

Quoted 207 lines
---
 drivers/gpu/drm/i915/intel_ringbuffer.c | 134 ++++++++++++++++++++++----------
 1 file changed, 92 insertions(+), 42 deletions(-)
drivers/gpu/drm/i915/intel_ringbuffer.c +92 -42
index 7a8c5d8..db63a5c 100644
@@ -1857,19 +1857,33 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
 	ring->id = RCS;
 	ring->mmio_base = RENDER_RING_BASE;
 
-	if (INTEL_INFO(dev)->gen >= 6) {
+	if (INTEL_INFO(dev)->gen >= 8) {
+		ring->add_request = gen6_add_request;
+		ring->flush = gen8_render_ring_flush;
+		ring->irq_get = gen8_ring_get_irq;
+		ring->irq_put = gen8_ring_put_irq;
+		ring->irq_enable_mask = GT_RENDER_USER_INTERRUPT;
+		ring->get_seqno = gen6_ring_get_seqno;
+		ring->set_seqno = ring_set_seqno;
+		ring->semaphore.sync_to = gen6_ring_sync;
+		if (i915_semaphore_is_enabled(dev))
+			ring->semaphore.signal = gen6_signal;
+		ring->semaphore.signal = gen6_signal;
+		ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.mbox[VECS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.signal_mbox[RCS] = GEN6_NOSYNC;
+		ring->semaphore.signal_mbox[VCS] = GEN6_NOSYNC;
+		ring->semaphore.signal_mbox[BCS] = GEN6_NOSYNC;
+		ring->semaphore.signal_mbox[VECS] = GEN6_NOSYNC;
+	} else if (INTEL_INFO(dev)->gen >= 6) {
 		ring->add_request = gen6_add_request;
 		ring->flush = gen7_render_ring_flush;
 		if (INTEL_INFO(dev)->gen == 6)
 			ring->flush = gen6_render_ring_flush;
-		if (INTEL_INFO(dev)->gen >= 8) {
-			ring->flush = gen8_render_ring_flush;
-			ring->irq_get = gen8_ring_get_irq;
-			ring->irq_put = gen8_ring_put_irq;
-		} else {
-			ring->irq_get = gen6_ring_get_irq;
-			ring->irq_put = gen6_ring_put_irq;
-		}
+		ring->irq_get = gen6_ring_get_irq;
+		ring->irq_put = gen6_ring_put_irq;
 		ring->irq_enable_mask = GT_RENDER_USER_INTERRUPT;
 		ring->get_seqno = gen6_ring_get_seqno;
 		ring->set_seqno = ring_set_seqno;
@@ -1911,6 +1925,7 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
 		ring->irq_enable_mask = I915_USER_INTERRUPT;
 	}
 	ring->write_tail = ring_write_tail;
+
 	if (IS_HASWELL(dev))
 		ring->dispatch_execbuffer = hsw_ring_dispatch_execbuffer;
 	else if (IS_GEN8(dev))
@@ -2044,24 +2059,35 @@ int intel_init_bsd_ring_buffer(struct drm_device *dev)
 			ring->irq_put = gen8_ring_put_irq;
 			ring->dispatch_execbuffer =
 				gen8_ring_dispatch_execbuffer;
+			ring->semaphore.sync_to = gen6_ring_sync;
+			if (i915_semaphore_is_enabled(dev))
+				ring->semaphore.signal = gen6_signal;
+			ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_INVALID;
+			ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_INVALID;
+			ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_INVALID;
+			ring->semaphore.mbox[VECS] = MI_SEMAPHORE_SYNC_INVALID;
+			ring->semaphore.signal_mbox[RCS] = GEN6_NOSYNC;
+			ring->semaphore.signal_mbox[VCS] = GEN6_NOSYNC;
+			ring->semaphore.signal_mbox[BCS] = GEN6_NOSYNC;
+			ring->semaphore.signal_mbox[VECS] = GEN6_NOSYNC;
 		} else {
 			ring->irq_enable_mask = GT_BSD_USER_INTERRUPT;
 			ring->irq_get = gen6_ring_get_irq;
 			ring->irq_put = gen6_ring_put_irq;
 			ring->dispatch_execbuffer =
 				gen6_ring_dispatch_execbuffer;
+			ring->semaphore.sync_to = gen6_ring_sync;
+			if (i915_semaphore_is_enabled(dev))
+				ring->semaphore.signal = gen6_signal;
+			ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_VR;
+			ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_INVALID;
+			ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_VB;
+			ring->semaphore.mbox[VECS] = MI_SEMAPHORE_SYNC_VVE;
+			ring->semaphore.signal_mbox[RCS] = GEN6_RVSYNC;
+			ring->semaphore.signal_mbox[VCS] = GEN6_NOSYNC;
+			ring->semaphore.signal_mbox[BCS] = GEN6_BVSYNC;
+			ring->semaphore.signal_mbox[VECS] = GEN6_VEVSYNC;
 		}
-		ring->semaphore.sync_to = gen6_ring_sync;
-		if (i915_semaphore_is_enabled(dev))
-			ring->semaphore.signal = gen6_signal;
-		ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_VR;
-		ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_INVALID;
-		ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_VB;
-		ring->semaphore.mbox[VECS] = MI_SEMAPHORE_SYNC_VVE;
-		ring->semaphore.signal_mbox[RCS] = GEN6_RVSYNC;
-		ring->semaphore.signal_mbox[VCS] = GEN6_NOSYNC;
-		ring->semaphore.signal_mbox[BCS] = GEN6_BVSYNC;
-		ring->semaphore.signal_mbox[VECS] = GEN6_VEVSYNC;
 	} else {
 		ring->mmio_base = BSD_RING_BASE;
 		ring->flush = bsd_ring_flush;
@@ -2104,23 +2130,35 @@ int intel_init_blt_ring_buffer(struct drm_device *dev)
 		ring->irq_get = gen8_ring_get_irq;
 		ring->irq_put = gen8_ring_put_irq;
 		ring->dispatch_execbuffer = gen8_ring_dispatch_execbuffer;
+		ring->semaphore.sync_to = gen6_ring_sync;
+		if (i915_semaphore_is_enabled(dev))
+			ring->semaphore.signal = gen6_signal;
+		ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.mbox[VECS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.signal_mbox[RCS] = GEN6_NOSYNC;
+		ring->semaphore.signal_mbox[VCS] = GEN6_NOSYNC;
+		ring->semaphore.signal_mbox[BCS] = GEN6_NOSYNC;
+		ring->semaphore.signal_mbox[VECS] = GEN6_NOSYNC;
 	} else {
 		ring->irq_enable_mask = GT_BLT_USER_INTERRUPT;
 		ring->irq_get = gen6_ring_get_irq;
 		ring->irq_put = gen6_ring_put_irq;
 		ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer;
+		ring->semaphore.sync_to = gen6_ring_sync;
+		if (i915_semaphore_is_enabled(dev))
+			ring->semaphore.signal = gen6_signal;
+		ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_BR;
+		ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_BV;
+		ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.mbox[VECS] = MI_SEMAPHORE_SYNC_BVE;
+		ring->semaphore.signal_mbox[RCS] = GEN6_RBSYNC;
+		ring->semaphore.signal_mbox[VCS] = GEN6_VBSYNC;
+		ring->semaphore.signal_mbox[BCS] = GEN6_NOSYNC;
+		ring->semaphore.signal_mbox[VECS] = GEN6_VEBSYNC;
 	}
-	ring->semaphore.sync_to = gen6_ring_sync;
-	if (i915_semaphore_is_enabled(dev))
-		ring->semaphore.signal = gen6_signal;
-	ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_BR;
-	ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_BV;
-	ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_INVALID;
-	ring->semaphore.mbox[VECS] = MI_SEMAPHORE_SYNC_BVE;
-	ring->semaphore.signal_mbox[RCS] = GEN6_RBSYNC;
-	ring->semaphore.signal_mbox[VCS] = GEN6_VBSYNC;
-	ring->semaphore.signal_mbox[BCS] = GEN6_NOSYNC;
-	ring->semaphore.signal_mbox[VECS] = GEN6_VEBSYNC;
+
 	ring->init = init_ring_common;
 
 	return intel_init_ring_buffer(dev, ring);
@@ -2147,23 +2185,35 @@ int intel_init_vebox_ring_buffer(struct drm_device *dev)
 		ring->irq_get = gen8_ring_get_irq;
 		ring->irq_put = gen8_ring_put_irq;
 		ring->dispatch_execbuffer = gen8_ring_dispatch_execbuffer;
+		ring->semaphore.sync_to = gen6_ring_sync;
+		if (i915_semaphore_is_enabled(dev))
+			ring->semaphore.signal = gen6_signal;
+		ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.mbox[VECS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.signal_mbox[RCS] = GEN6_NOSYNC;
+		ring->semaphore.signal_mbox[VCS] = GEN6_NOSYNC;
+		ring->semaphore.signal_mbox[BCS] = GEN6_NOSYNC;
+		ring->semaphore.signal_mbox[VECS] = GEN6_NOSYNC;
 	} else {
 		ring->irq_enable_mask = PM_VEBOX_USER_INTERRUPT;
 		ring->irq_get = hsw_vebox_get_irq;
 		ring->irq_put = hsw_vebox_put_irq;
+		ring->semaphore.sync_to = gen6_ring_sync;
+		if (i915_semaphore_is_enabled(dev))
+			ring->semaphore.signal = gen6_signal;
+		ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_VER;
+		ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_VEV;
+		ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_VEB;
+		ring->semaphore.mbox[VECS] = MI_SEMAPHORE_SYNC_INVALID;
+		ring->semaphore.signal_mbox[RCS] = GEN6_RVESYNC;
+		ring->semaphore.signal_mbox[VCS] = GEN6_VVESYNC;
+		ring->semaphore.signal_mbox[BCS] = GEN6_BVESYNC;
+		ring->semaphore.signal_mbox[VECS] = GEN6_NOSYNC;
 		ring->dispatch_execbuffer = gen6_ring_dispatch_execbuffer;
 	}
-	ring->semaphore.sync_to = gen6_ring_sync;
-	if (i915_semaphore_is_enabled(dev))
-		ring->semaphore.signal = gen6_signal;
-	ring->semaphore.mbox[RCS] = MI_SEMAPHORE_SYNC_VER;
-	ring->semaphore.mbox[VCS] = MI_SEMAPHORE_SYNC_VEV;
-	ring->semaphore.mbox[BCS] = MI_SEMAPHORE_SYNC_VEB;
-	ring->semaphore.mbox[VECS] = MI_SEMAPHORE_SYNC_INVALID;
-	ring->semaphore.signal_mbox[RCS] = GEN6_RVESYNC;
-	ring->semaphore.signal_mbox[VCS] = GEN6_VVESYNC;
-	ring->semaphore.signal_mbox[BCS] = GEN6_BVESYNC;
-	ring->semaphore.signal_mbox[VECS] = GEN6_NOSYNC;
+
 	ring->init = init_ring_common;
 
 	return intel_init_ring_buffer(dev, ring);
Signature · 6 lines
1.8.5.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
#14 lore raw

PATCH v2 8/15 drm/i915/bdw: implement semaphore signal

In reply to Ben Widawsky

Semaphore signalling works similarly to previous GENs with the exception that the per ring mailboxes no longer exist. Instead you must define your own space, somewhere in the GTT.

The comments in the code define the layout I've opted for, which should be fairly future proof. Ie. I tried to define offsets in abstract terms (NUM_RINGS, seqno size, etc).

NOTE: If one wanted to move this to the HWSP they could. I've decided one 4k object would be easier to deal with, and provide potential wins with cache locality, but that's all speculative.

v2: Update the macro to not need the other ring's ring->id (Chris) Update the comment to use the correct formula (Chris)

---
 drivers/gpu/drm/i915/i915_drv.h         |   1 +
 drivers/gpu/drm/i915/i915_reg.h         |   5 +-
 drivers/gpu/drm/i915/intel_ringbuffer.c | 199 +++++++++++++++++++++++++-------
 drivers/gpu/drm/i915/intel_ringbuffer.h |  38 +++++-
 4 files changed, 197 insertions(+), 46 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +1 -0
index c638547..4ccb436 100644
@@ -1355,6 +1355,7 @@ typedef struct drm_i915_private {
 
 	struct pci_dev *bridge_dev;
 	struct intel_ring_buffer ring[I915_NUM_RINGS];
+	struct drm_i915_gem_object *semaphore_obj;
 	uint32_t last_seqno, next_seqno;
 
 	drm_dma_handle_t *status_page_dmah;
drivers/gpu/drm/i915/i915_reg.h +4 -1
index ac87ab8..5c3bf66 100644
@@ -215,7 +215,7 @@
 #define   MI_DISPLAY_FLIP_IVB_SPRITE_B (3 << 19)
 #define   MI_DISPLAY_FLIP_IVB_PLANE_C  (4 << 19)
 #define   MI_DISPLAY_FLIP_IVB_SPRITE_C (5 << 19)
-#define MI_SEMAPHORE_MBOX	MI_INSTR(0x16, 1) /* gen6+ */
+#define MI_SEMAPHORE_MBOX	MI_INSTR(0x16, 1) /* gen6, gen7 */
 #define   MI_SEMAPHORE_GLOBAL_GTT    (1<<22)
 #define   MI_SEMAPHORE_UPDATE	    (1<<21)
 #define   MI_SEMAPHORE_COMPARE	    (1<<20)
@@ -240,6 +240,8 @@
 #define   MI_RESTORE_EXT_STATE_EN	(1<<2)
 #define   MI_FORCE_RESTORE		(1<<1)
 #define   MI_RESTORE_INHIBIT		(1<<0)
+#define MI_SEMAPHORE_SIGNAL	MI_INSTR(0x1b, 0) /* GEN8+ */
+#define   MI_SEMAPHORE_TARGET(engine)	((engine)<<15)
 #define MI_STORE_DWORD_IMM	MI_INSTR(0x20, 1)
 #define   MI_MEM_VIRTUAL	(1 << 22) /* 965+ only */
 #define MI_STORE_DWORD_INDEX	MI_INSTR(0x21, 1)
@@ -328,6 +330,7 @@
 #define   PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE		(1<<10) /* GM45+ only */
 #define   PIPE_CONTROL_INDIRECT_STATE_DISABLE		(1<<9)
 #define   PIPE_CONTROL_NOTIFY				(1<<8)
+#define   PIPE_CONTROL_FLUSH_ENABLE			(1<<7) /* gen7+ */
 #define   PIPE_CONTROL_VF_CACHE_INVALIDATE		(1<<4)
 #define   PIPE_CONTROL_CONST_CACHE_INVALIDATE		(1<<3)
 #define   PIPE_CONTROL_STATE_CACHE_INVALIDATE		(1<<2)
drivers/gpu/drm/i915/intel_ringbuffer.c +155 -44

257 lines not on this page · raw message

drivers/gpu/drm/i915/intel_ringbuffer.h +37 -1
index c69ae10..f1e7a66 100644
@@ -111,6 +111,39 @@ struct  intel_ring_buffer {
 #define I915_DISPATCH_PINNED 0x2
 	void		(*cleanup)(struct intel_ring_buffer *ring);
 
+	/* GEN8 signal/wait table
+	 *	  signal to  signal to    signal to   signal to
+	 *	    RCS         VCS          BCS        VECS
+	 *      ------------------------------------------------------
+	 *  RCS | NOP (0x00) | BCS (0x08) | VCS (0x10) | VECS (0x18) |
+	 *	|-----------------------------------------------------
+	 *  VCS | RCS (0x20) | NOP (0x28) | BCS (0x30) | VECS (0x38) |
+	 *	|-----------------------------------------------------
+	 *  BCS | RCS (0x40) | VCS (0x48) | NOP (0x50) | VECS (0x58) |
+	 *	|-----------------------------------------------------
+	 * VECS | RCS (0x60) | VCS (0x68) | BCS (0x70) |  NOP (0x78) |
+	 *	|-----------------------------------------------------
+	 *
+	 * Generalization:
+	 *  f(x, y) := (x->id * NUM_RINGS * seqno_size) + (seqno_size * y->id)
+	 *  ie. transpose of g(x, y)
+	 *
+	 *	 sync from   sync from    sync from    sync from
+	 *	    RCS         VCS          BCS        VECS
+	 *      ------------------------------------------------------
+	 *  RCS | NOP (0x00) | BCS (0x20) | VCS (0x40) | VECS (0x60) |
+	 *	|-----------------------------------------------------
+	 *  VCS | RCS (0x08) | NOP (0x28) | BCS (0x48) | VECS (0x68) |
+	 *	|-----------------------------------------------------
+	 *  BCS | RCS (0x10) | VCS (0x30) | NOP (0x50) | VECS (0x60) |
+	 *	|-----------------------------------------------------
+	 * VECS | RCS (0x18) | VCS (0x38) | BCS (0x58) |  NOP (0x78) |
+	 *	|-----------------------------------------------------
+	 *
+	 * Generalization:
+	 *  g(x, y) := (y->id * NUM_RINGS * seqno_size) + (seqno_size * x->id)
+	 *  ie. transpose of f(x, y)
+	 */
 	struct {
 		u32	sync_seqno[I915_NUM_RINGS-1];
 		/* AKA wait() */
@@ -120,7 +153,10 @@ struct  intel_ring_buffer {
 		/* our mbox written by others */
 		u32		mbox[I915_NUM_RINGS];
 		/* mboxes this ring signals to */
-		u32		signal_mbox[I915_NUM_RINGS];
+		union {
+			u32		signal_mbox[I915_NUM_RINGS];
+			u64		signal_ggtt[I915_NUM_RINGS];
+		};
 
 		/* num_dwords is space the caller will need for atomic update */
 		int		(*signal)(struct intel_ring_buffer *signaller,
Signature · 1 line
1.8.5.1
#15 lore raw

Re: [PATCH 08/15] drm/i915/bdw: implement semaphore signal

Quoted 7 lines · Ben Widawsky
drivers/gpu/drm/i915/intel_ringbuffer.c +7 -0
+static int gen8_rcs_signal(struct intel_ring_buffer *signaller,
+			   unsigned int num_dwords)
+{
+#define MBOX_UPDATE_DWORDS 8
+	struct drm_device *dev = signaller->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_ring_buffer *waiter;

drivers/gpu/drm/i915/intel_ringbuffer.c static void render_ring_cleanup(struct intel_ring_buffer *ring) · line 658

Quoted 10 lines
drivers/gpu/drm/i915/intel_ringbuffer.c +10 -0
+	int i, ret, num_rings;
+
+	num_rings = hweight_long(INTEL_INFO(dev)->ring_mask);
+	num_dwords = (num_rings-1) * MBOX_UPDATE_DWORDS;
+#undef MBOX_UPDATE_DWORDS
+
+	/* XXX: + 4 for the caller */
+	ret = intel_ring_begin(signaller, num_dwords + 4);
+	if (ret)
+		return ret;

You now pass down how many dwords the caller requires so it should just be num_dwords += (num_rings - 1) * DWORDS_PER_MBOX; above. -Chris

Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre
#16 lore raw

PATCH v3 8/15 drm/i915/bdw: implement semaphore signal

Semaphore signalling works similarly to previous GENs with the exception that the per ring mailboxes no longer exist. Instead you must define your own space, somewhere in the GTT.

The comments in the code define the layout I've opted for, which should be fairly future proof. Ie. I tried to define offsets in abstract terms (NUM_RINGS, seqno size, etc).

NOTE: If one wanted to move this to the HWSP they could. I've decided one 4k object would be easier to deal with, and provide potential wins with cache locality, but that's all speculative.

v2: Update the macro to not need the other ring's ring->id (Chris)

v3: After the num_dwords update in the last patch, size was not properly adjusted on rebase. (Chris)

---
 drivers/gpu/drm/i915/i915_drv.h         |   1 +
 drivers/gpu/drm/i915/i915_reg.h         |   5 +-
 drivers/gpu/drm/i915/intel_ringbuffer.c | 198 +++++++++++++++++++++++++-------
 drivers/gpu/drm/i915/intel_ringbuffer.h |  38 +++++-
 4 files changed, 196 insertions(+), 46 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +1 -0
index c638547..4ccb436 100644
@@ -1355,6 +1355,7 @@ typedef struct drm_i915_private {
 
 	struct pci_dev *bridge_dev;
 	struct intel_ring_buffer ring[I915_NUM_RINGS];
+	struct drm_i915_gem_object *semaphore_obj;
 	uint32_t last_seqno, next_seqno;
 
 	drm_dma_handle_t *status_page_dmah;
drivers/gpu/drm/i915/i915_reg.h +4 -1
index ac87ab8..5c3bf66 100644
@@ -215,7 +215,7 @@
 #define   MI_DISPLAY_FLIP_IVB_SPRITE_B (3 << 19)
 #define   MI_DISPLAY_FLIP_IVB_PLANE_C  (4 << 19)
 #define   MI_DISPLAY_FLIP_IVB_SPRITE_C (5 << 19)
-#define MI_SEMAPHORE_MBOX	MI_INSTR(0x16, 1) /* gen6+ */
+#define MI_SEMAPHORE_MBOX	MI_INSTR(0x16, 1) /* gen6, gen7 */
 #define   MI_SEMAPHORE_GLOBAL_GTT    (1<<22)
 #define   MI_SEMAPHORE_UPDATE	    (1<<21)
 #define   MI_SEMAPHORE_COMPARE	    (1<<20)
@@ -240,6 +240,8 @@
 #define   MI_RESTORE_EXT_STATE_EN	(1<<2)
 #define   MI_FORCE_RESTORE		(1<<1)
 #define   MI_RESTORE_INHIBIT		(1<<0)
+#define MI_SEMAPHORE_SIGNAL	MI_INSTR(0x1b, 0) /* GEN8+ */
+#define   MI_SEMAPHORE_TARGET(engine)	((engine)<<15)
 #define MI_STORE_DWORD_IMM	MI_INSTR(0x20, 1)
 #define   MI_MEM_VIRTUAL	(1 << 22) /* 965+ only */
 #define MI_STORE_DWORD_INDEX	MI_INSTR(0x21, 1)
@@ -328,6 +330,7 @@
 #define   PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE		(1<<10) /* GM45+ only */
 #define   PIPE_CONTROL_INDIRECT_STATE_DISABLE		(1<<9)
 #define   PIPE_CONTROL_NOTIFY				(1<<8)
+#define   PIPE_CONTROL_FLUSH_ENABLE			(1<<7) /* gen7+ */
 #define   PIPE_CONTROL_VF_CACHE_INVALIDATE		(1<<4)
 #define   PIPE_CONTROL_CONST_CACHE_INVALIDATE		(1<<3)
 #define   PIPE_CONTROL_STATE_CACHE_INVALIDATE		(1<<2)
drivers/gpu/drm/i915/intel_ringbuffer.c +154 -44

256 lines not on this page · raw message

drivers/gpu/drm/i915/intel_ringbuffer.h +37 -1
index c69ae10..cbaa346 100644
@@ -111,6 +111,39 @@ struct  intel_ring_buffer {
 #define I915_DISPATCH_PINNED 0x2
 	void		(*cleanup)(struct intel_ring_buffer *ring);
 
+	/* GEN8 signal/wait table
+	 *	  signal to  signal to    signal to   signal to
+	 *	    RCS         VCS          BCS        VECS
+	 *      ------------------------------------------------------
+	 *  RCS | NOP (0x00) | BCS (0x08) | VCS (0x10) | VECS (0x18) |
+	 *	|-----------------------------------------------------
+	 *  VCS | RCS (0x20) | NOP (0x28) | BCS (0x30) | VECS (0x38) |
+	 *	|-----------------------------------------------------
+	 *  BCS | RCS (0x40) | VCS (0x48) | NOP (0x50) | VECS (0x58) |
+	 *	|-----------------------------------------------------
+	 * VECS | RCS (0x60) | VCS (0x68) | BCS (0x70) |  NOP (0x78) |
+	 *	|-----------------------------------------------------
+	 *
+	 * Generalization:
+	 *  f(x, y) := (x->id * NUM_RINGS) + (seqno_size * y->id)
+	 *  ie. transpose of g(x, y)
+	 *
+	 *	 sync from   sync from    sync from    sync from
+	 *	    RCS         VCS          BCS        VECS
+	 *      ------------------------------------------------------
+	 *  RCS | NOP (0x00) | BCS (0x20) | VCS (0x40) | VECS (0x60) |
+	 *	|-----------------------------------------------------
+	 *  VCS | RCS (0x08) | NOP (0x28) | BCS (0x48) | VECS (0x68) |
+	 *	|-----------------------------------------------------
+	 *  BCS | RCS (0x10) | VCS (0x30) | NOP (0x50) | VECS (0x60) |
+	 *	|-----------------------------------------------------
+	 * VECS | RCS (0x18) | VCS (0x38) | BCS (0x58) |  NOP (0x78) |
+	 *	|-----------------------------------------------------
+	 *
+	 * Generalization:
+	 *  g(x, y) := (y->id * NUM_RINGS * NUM_RINGS) + (seqno_size * x->id)
+	 *  ie. transpose of f(x, y)
+	 */
 	struct {
 		u32	sync_seqno[I915_NUM_RINGS-1];
 		/* AKA wait() */
@@ -120,7 +153,10 @@ struct  intel_ring_buffer {
 		/* our mbox written by others */
 		u32		mbox[I915_NUM_RINGS];
 		/* mboxes this ring signals to */
-		u32		signal_mbox[I915_NUM_RINGS];
+		union {
+			u32		signal_mbox[I915_NUM_RINGS];
+			u64		signal_ggtt[I915_NUM_RINGS];
+		};
 
 		/* num_dwords is space the caller will need for atomic update */
 		int		(*signal)(struct intel_ring_buffer *signaller,
Signature · 1 line
1.8.5.1
#17 lore raw

PATCH v2 9/15 drm/i915/bdw: implement semaphore wait

In reply to Ben Widawsky

Semaphore waits use a new instruction, MI_SEMAPHORE_WAIT. The seqno to wait on is all well defined by the table in the previous patch. There is nothing else different from previous GEN's semaphore synchronization code.

v2: Update macros to not require the other ring's ring->id (Chris)

---
 drivers/gpu/drm/i915/i915_reg.h         |  3 ++
 drivers/gpu/drm/i915/intel_ringbuffer.c | 66 +++++++++++++++------------------
 drivers/gpu/drm/i915/intel_ringbuffer.h | 30 +++++++++++++++
 3 files changed, 62 insertions(+), 37 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +3 -0
index 5c3bf66..a47463f 100644
@@ -242,6 +242,9 @@
 #define   MI_RESTORE_INHIBIT		(1<<0)
 #define MI_SEMAPHORE_SIGNAL	MI_INSTR(0x1b, 0) /* GEN8+ */
 #define   MI_SEMAPHORE_TARGET(engine)	((engine)<<15)
+#define MI_SEMAPHORE_WAIT	MI_INSTR(0x1c, 2) /* GEN8+ */
+#define   MI_SEMAPHORE_POLL		(1<<15)
+#define   MI_SEMAPHORE_SAD_GTE_SDD	(1<<12)
 #define MI_STORE_DWORD_IMM	MI_INSTR(0x20, 1)
 #define   MI_MEM_VIRTUAL	(1 << 22) /* 965+ only */
 #define MI_STORE_DWORD_INDEX	MI_INSTR(0x21, 1)
drivers/gpu/drm/i915/intel_ringbuffer.c +29 -37

102 lines not on this page · raw message

drivers/gpu/drm/i915/intel_ringbuffer.h +30 -0
index f1e7a66..ed55370 100644
@@ -33,6 +33,36 @@ struct  intel_hw_status_page {
 #define I915_READ_IMR(ring) I915_READ(RING_IMR((ring)->mmio_base))
 #define I915_WRITE_IMR(ring, val) I915_WRITE(RING_IMR((ring)->mmio_base), val)
 
+/* seqno size is actually only a uint32, but since we plan to use MI_FLUSH_DW to
+ * do the writes, and that must have qw aligned offsets, simply pretend it's 8b.
+ */
+#define i915_semaphore_seqno_size sizeof(uint64_t)
+#define GEN8_SIGNAL_OFFSET(to) \
+	(i915_gem_obj_ggtt_offset(dev_priv->semaphore_obj) + \
+	(ring->id * I915_NUM_RINGS * i915_semaphore_seqno_size) + \
+	(i915_semaphore_seqno_size * (to)))
+
+#define GEN8_WAIT_OFFSET(__ring, from) \
+	(i915_gem_obj_ggtt_offset(dev_priv->semaphore_obj) + \
+	((from) * I915_NUM_RINGS * i915_semaphore_seqno_size) + \
+	(i915_semaphore_seqno_size * (__ring)->id))
+
+#define GEN8_RING_SEMAPHORE_INIT do { \
+	if (!dev_priv->semaphore_obj) { \
+		break; \
+	} \
+	ring->semaphore.signal_ggtt[RCS] = GEN8_SIGNAL_OFFSET(RCS); \
+	ring->semaphore.signal_ggtt[VCS] = GEN8_SIGNAL_OFFSET(VCS); \
+	ring->semaphore.signal_ggtt[BCS] = GEN8_SIGNAL_OFFSET(BCS); \
+	ring->semaphore.signal_ggtt[VECS] = GEN8_SIGNAL_OFFSET(VECS); \
+	ring->semaphore.mbox[RCS] = GEN8_WAIT_OFFSET(ring, RCS); \
+	ring->semaphore.mbox[VCS] = GEN8_WAIT_OFFSET(ring, VCS); \
+	ring->semaphore.mbox[BCS] = GEN8_WAIT_OFFSET(ring, BCS); \
+	ring->semaphore.mbox[VECS] = GEN8_WAIT_OFFSET(ring, VECS); \
+	ring->semaphore.signal_ggtt[ring->id] = MI_SEMAPHORE_SYNC_INVALID; \
+	ring->semaphore.mbox[ring->id] = GEN6_NOSYNC; \
+	} while(0)
+
 enum intel_ring_hangcheck_action {
 	HANGCHECK_IDLE = 0,
 	HANGCHECK_WAIT,
Signature · 1 line
1.8.5.1
#18 lore raw

Re: [PATCH 09/15] drm/i915/bdw: implement semaphore wait

Quoted 13 lines · Ben Widawsky

Semaphore waits use a new instruction, MI_SEMAPHORE_WAIT. The seqno to wait on is all well defined by the table in the previous patch. There is nothing else different from previous GEN's semaphore synchronization code.

v2: Update macros to not require the other ring's ring->id (Chris)

---

drivers/gpu/drm/i915/intel_ringbuffer.h +3 -0
+/* seqno size is actually only a uint32, but since we plan to use MI_FLUSH_DW to
+ * do the writes, and that must have qw aligned offsets, simply pretend it's 8b.
+ */

drivers/gpu/drm/i915/intel_ringbuffer.h struct intel_hw_status_page { · line 48

Quoted 10 lines
drivers/gpu/drm/i915/intel_ringbuffer.h +10 -0
+#define i915_semaphore_seqno_size sizeof(uint64_t)
+#define GEN8_SIGNAL_OFFSET(to) \
+	(i915_gem_obj_ggtt_offset(dev_priv->semaphore_obj) + \
+	(ring->id * I915_NUM_RINGS * i915_semaphore_seqno_size) + \
+	(i915_semaphore_seqno_size * (to)))
+
+#define GEN8_WAIT_OFFSET(__ring, from) \
+	(i915_gem_obj_ggtt_offset(dev_priv->semaphore_obj) + \
+	((from) * I915_NUM_RINGS * i915_semaphore_seqno_size) + \
+	(i915_semaphore_seqno_size * (__ring)->id))

Please sir, may I have

#define GEN8_SEMAPHORE_OFFSET(from, to) \
	(i915_gem_obj_ggtt_offset(dev_priv->semaphore_obj) + \
	((from) * I915_NUM_RINGS + (to)) * i915_semaphore_seqno_size)

#define GEN8_SIGNAL_OFFSET(to) GEN8_SEMAPHORE_OFFSET(ring->id, to) #define GEN8_WAIT_OFFSET(from) GEN8_SEMAPHORE_OFFSET(from, ring->id) ?

Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre
#19 lore raw

PATCH v3 9/15 drm/i915/bdw: implement semaphore wait

Semaphore waits use a new instruction, MI_SEMAPHORE_WAIT. The seqno to wait on is all well defined by the table in the previous patch. There is nothing else different from previous GEN's semaphore synchronization code.

v2: Update macros to not require the other ring's ring->id (Chris)

v3: Use a condensed GEN8_SEMAPHORE_OFFSET to define the WAIT/SIGNAL offsets (Chris). To be honest, I prefer the original implementation because I feel it is more explicit about exactly what is going on. I am willing to declare I am just unsmart, and leave it there.

---
 drivers/gpu/drm/i915/i915_reg.h         |  3 ++
 drivers/gpu/drm/i915/intel_ringbuffer.c | 66 +++++++++++++++------------------
 drivers/gpu/drm/i915/intel_ringbuffer.h | 30 +++++++++++++++
 3 files changed, 62 insertions(+), 37 deletions(-)
drivers/gpu/drm/i915/i915_reg.h +3 -0
index 5c3bf66..a47463f 100644
@@ -242,6 +242,9 @@
 #define   MI_RESTORE_INHIBIT		(1<<0)
 #define MI_SEMAPHORE_SIGNAL	MI_INSTR(0x1b, 0) /* GEN8+ */
 #define   MI_SEMAPHORE_TARGET(engine)	((engine)<<15)
+#define MI_SEMAPHORE_WAIT	MI_INSTR(0x1c, 2) /* GEN8+ */
+#define   MI_SEMAPHORE_POLL		(1<<15)
+#define   MI_SEMAPHORE_SAD_GTE_SDD	(1<<12)
 #define MI_STORE_DWORD_IMM	MI_INSTR(0x20, 1)
 #define   MI_MEM_VIRTUAL	(1 << 22) /* 965+ only */
 #define MI_STORE_DWORD_INDEX	MI_INSTR(0x21, 1)
drivers/gpu/drm/i915/intel_ringbuffer.c +29 -37

102 lines not on this page · raw message

drivers/gpu/drm/i915/intel_ringbuffer.h +30 -0
index cbaa346..26beade 100644
@@ -33,6 +33,36 @@ struct  intel_hw_status_page {
 #define I915_READ_IMR(ring) I915_READ(RING_IMR((ring)->mmio_base))
 #define I915_WRITE_IMR(ring, val) I915_WRITE(RING_IMR((ring)->mmio_base), val)
 
+/* seqno size is actually only a uint32, but since we plan to use MI_FLUSH_DW to
+ * do the writes, and that must have qw aligned offsets, simply pretend it's 8b.
+ */
+#define i915_semaphore_seqno_size sizeof(uint64_t)
+#define GEN8_SEMAPHORE_OFFSET(from, to) \
+	(i915_gem_obj_ggtt_offset(dev_priv->semaphore_obj) + \
+	((from) * I915_NUM_RINGS + (to)) * i915_semaphore_seqno_size)
+
+#define GEN8_SIGNAL_OFFSET(to) \
+	GEN8_SEMAPHORE_OFFSET(ring->id, to)
+
+#define GEN8_WAIT_OFFSET(__ring, from) \
+	GEN8_SEMAPHORE_OFFSET(from, (__ring)->id)
+
+#define GEN8_RING_SEMAPHORE_INIT do { \
+	if (!dev_priv->semaphore_obj) { \
+		break; \
+	} \
+	ring->semaphore.signal_ggtt[RCS] = GEN8_SIGNAL_OFFSET(RCS); \
+	ring->semaphore.signal_ggtt[VCS] = GEN8_SIGNAL_OFFSET(VCS); \
+	ring->semaphore.signal_ggtt[BCS] = GEN8_SIGNAL_OFFSET(BCS); \
+	ring->semaphore.signal_ggtt[VECS] = GEN8_SIGNAL_OFFSET(VECS); \
+	ring->semaphore.mbox[RCS] = GEN8_WAIT_OFFSET(ring, RCS); \
+	ring->semaphore.mbox[VCS] = GEN8_WAIT_OFFSET(ring, VCS); \
+	ring->semaphore.mbox[BCS] = GEN8_WAIT_OFFSET(ring, BCS); \
+	ring->semaphore.mbox[VECS] = GEN8_WAIT_OFFSET(ring, VECS); \
+	ring->semaphore.signal_ggtt[ring->id] = MI_SEMAPHORE_SYNC_INVALID; \
+	ring->semaphore.mbox[ring->id] = GEN6_NOSYNC; \
+	} while(0)
+
 enum intel_ring_hangcheck_action {
 	HANGCHECK_IDLE = 0,
 	HANGCHECK_WAIT,
Signature · 1 line
1.8.5.1
#20 lore raw

PATCH v2 10/15 drm/i915: FORCE_RESTORE for gen8 semaphores

In reply to Ben Widawsky

Implement the note indicated in the bspec.

---
 drivers/gpu/drm/i915/i915_gem_context.c | 9 +++++++++
 1 file changed, 9 insertions(+)
drivers/gpu/drm/i915/i915_gem_context.c +9 -0
index e08acab..a14a3b3 100644
@@ -446,6 +446,15 @@ static int do_switch(struct i915_hw_context *to)
 	if (!to->is_initialized || is_default_context(to))
 		hw_flags |= MI_RESTORE_INHIBIT;
 
+	/* When SW intends to use semaphore signaling between Command streamers,
+	 * it must avoid lite restores in HW by programming "Force Restore" bit
+	 * to ‘1’ in context descriptor during context submission
+	 *
+	 * XXX: is this really needed for ringbuffer mode?
+	 */
+	if (IS_GEN8(ring->dev) && i915_semaphore_is_enabled(ring->dev))
+		hw_flags |= MI_FORCE_RESTORE;
+
 	ret = mi_set_context(ring, to, hw_flags);
 	if (ret) {
 		i915_gem_object_unpin(to->obj);
Signature · 6 lines
1.8.5.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#21 lore raw

PATCH v2 11/15 drm/i915/bdw: poll semaphores

In reply to Ben Widawsky
---
 drivers/gpu/drm/i915/intel_ringbuffer.c | 1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/i915/intel_ringbuffer.c +1 -0
index cf20140..66f6e1c 100644
@@ -812,6 +812,7 @@ gen8_ring_sync(struct intel_ring_buffer *waiter,
 
 	intel_ring_emit(waiter, MI_SEMAPHORE_WAIT |
 				MI_SEMAPHORE_GLOBAL_GTT |
+				MI_SEMAPHORE_POLL |
 				MI_SEMAPHORE_SAD_GTE_SDD);
 	intel_ring_emit(waiter, seqno);
 	intel_ring_emit(waiter,
Signature · 1 line
1.8.5.1
#22 lore raw

Re: [PATCH 11/15] drm/i915/bdw: poll semaphores

Quoted 1 line · Ben Widawsky

Can you source this recommendation, even if just personal communication? Is this likely to be temporary? Will a difference (power, latency) ever be measurable?
-Chris

Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre
#23 lore raw

PATCH v2 12/15 drm/i915: Extract semaphore error collection

In reply to Ben Widawsky
---
 drivers/gpu/drm/i915/i915_gpu_error.c | 31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)
drivers/gpu/drm/i915/i915_gpu_error.c +19 -12
index a577640..ebdc8a7 100644
@@ -695,6 +695,24 @@ i915_error_first_batchbuffer(struct drm_i915_private *dev_priv,
 	return NULL;
 }
 
+static void gen6_record_semaphore_state(struct drm_i915_private *dev_priv,
+					struct drm_i915_error_state *error,
+					struct intel_ring_buffer *ring)
+{
+	error->semaphore_mboxes[ring->id][0]
+			= I915_READ(RING_SYNC_0(ring->mmio_base));
+	error->semaphore_mboxes[ring->id][1]
+		= I915_READ(RING_SYNC_1(ring->mmio_base));
+	error->semaphore_seqno[ring->id][0] = ring->semaphore.sync_seqno[0];
+	error->semaphore_seqno[ring->id][1] = ring->semaphore.sync_seqno[1];
+
+	if (HAS_VEBOX(dev_priv->dev)) {
+		error->semaphore_mboxes[ring->id][2] =
+			I915_READ(RING_SYNC_2(ring->mmio_base));
+		error->semaphore_seqno[ring->id][2] = ring->semaphore.sync_seqno[2];
+	}
+}
+
 static void i915_record_ring_state(struct drm_device *dev,
 				   struct drm_i915_error_state *error,
 				   struct intel_ring_buffer *ring)
@@ -704,18 +722,7 @@ static void i915_record_ring_state(struct drm_device *dev,
 	if (INTEL_INFO(dev)->gen >= 6) {
 		error->rc_psmi[ring->id] = I915_READ(ring->mmio_base + 0x50);
 		error->fault_reg[ring->id] = I915_READ(RING_FAULT_REG(ring));
-		error->semaphore_mboxes[ring->id][0]
-			= I915_READ(RING_SYNC_0(ring->mmio_base));
-		error->semaphore_mboxes[ring->id][1]
-			= I915_READ(RING_SYNC_1(ring->mmio_base));
-		error->semaphore_seqno[ring->id][0] = ring->semaphore.sync_seqno[0];
-		error->semaphore_seqno[ring->id][1] = ring->semaphore.sync_seqno[1];
-	}
-
-	if (HAS_VEBOX(dev)) {
-		error->semaphore_mboxes[ring->id][2] =
-			I915_READ(RING_SYNC_2(ring->mmio_base));
-		error->semaphore_seqno[ring->id][2] = ring->semaphore.sync_seqno[2];
+		gen6_record_semaphore_state(dev_priv, error, ring);
 	}
 
 	if (INTEL_INFO(dev)->gen >= 4) {
Signature · 1 line
1.8.5.1
#24 lore raw

Re: [PATCH 12/15] drm/i915: Extract semaphore error collection

On Mon, Dec 16, 2013 at 08:50:48PM -0800, Ben Widawsky wrote:

Refactoring semaphore error state capture in preparation for future hardware support.

Quoted 1 line

A trivial explanation for a trivial patch is better than none. :) -Chris

Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre
#25 lore raw

Re: [PATCH 12/15] drm/i915: Extract semaphore error collection

Quoted 10 lines · Chris Wilson

On Mon, Dec 16, 2013 at 08:50:48PM -0800, Ben Widawsky wrote:

Refactoring semaphore error state capture in preparation for future hardware support.

Quoted 1 line

A trivial explanation for a trivial patch is better than none. :) -Chris

Daniel if you don't mind, please add this if/when merge. If you do mind, I will repost.

Thanks.

Signature · 1 line
Ben Widawsky, Intel Open Source Technology Center
#26 lore raw

PATCH v2 13/15 drm/i915/bdw: collect semaphore error state

In reply to Ben Widawsky

Since the semaphore information is in an object, just dump it, and let the user parse it later.

NOTE: The page being used for the semaphores are incoherent with the CPU. No matter what I do, I cannot figure out a way to read anything but 0s. Note that the semaphore waits are indeed working.

v2: Don't print signal, and wait (they should be the same). Instead, print sync_seqno (Chris)

v3: Free the semaphore error object (Chris)

---
 drivers/gpu/drm/i915/i915_drv.h         |  1 +
 drivers/gpu/drm/i915/i915_gpu_error.c   | 46 ++++++++++++++++++++++++++++++---
 drivers/gpu/drm/i915/intel_ringbuffer.h | 12 ++++-----
 3 files changed, 50 insertions(+), 9 deletions(-)
drivers/gpu/drm/i915/i915_drv.h +1 -0
index 4ccb436..8496839 100644
@@ -312,6 +312,7 @@ struct drm_i915_error_state {
 	u32 acthd[I915_NUM_RINGS];
 	u32 semaphore_mboxes[I915_NUM_RINGS][I915_NUM_RINGS - 1];
 	u32 semaphore_seqno[I915_NUM_RINGS][I915_NUM_RINGS - 1];
+	struct drm_i915_error_object *semaphore_obj;
 	u32 rc_psmi[I915_NUM_RINGS]; /* sleep state */
 	/* our own tracking of ring head and tail */
 	u32 cpu_ring_head[I915_NUM_RINGS];
drivers/gpu/drm/i915/i915_gpu_error.c +43 -3

82 lines not on this page · raw message

drivers/gpu/drm/i915/intel_ringbuffer.h +6 -6
index ed55370..4ca2789 100644
@@ -37,9 +37,9 @@ struct  intel_hw_status_page {
  * do the writes, and that must have qw aligned offsets, simply pretend it's 8b.
  */
 #define i915_semaphore_seqno_size sizeof(uint64_t)
-#define GEN8_SIGNAL_OFFSET(to) \
+#define GEN8_SIGNAL_OFFSET(__ring, to) \
 	(i915_gem_obj_ggtt_offset(dev_priv->semaphore_obj) + \
-	(ring->id * I915_NUM_RINGS * i915_semaphore_seqno_size) + \
+	((__ring)->id * I915_NUM_RINGS * i915_semaphore_seqno_size) + \
 	(i915_semaphore_seqno_size * (to)))
 
 #define GEN8_WAIT_OFFSET(__ring, from) \
@@ -51,10 +51,10 @@ struct  intel_hw_status_page {
 	if (!dev_priv->semaphore_obj) { \
 		break; \
 	} \
-	ring->semaphore.signal_ggtt[RCS] = GEN8_SIGNAL_OFFSET(RCS); \
-	ring->semaphore.signal_ggtt[VCS] = GEN8_SIGNAL_OFFSET(VCS); \
-	ring->semaphore.signal_ggtt[BCS] = GEN8_SIGNAL_OFFSET(BCS); \
-	ring->semaphore.signal_ggtt[VECS] = GEN8_SIGNAL_OFFSET(VECS); \
+	ring->semaphore.signal_ggtt[RCS] = GEN8_SIGNAL_OFFSET(ring, RCS); \
+	ring->semaphore.signal_ggtt[VCS] = GEN8_SIGNAL_OFFSET(ring, VCS); \
+	ring->semaphore.signal_ggtt[BCS] = GEN8_SIGNAL_OFFSET(ring, BCS); \
+	ring->semaphore.signal_ggtt[VECS] = GEN8_SIGNAL_OFFSET(ring, VECS); \
 	ring->semaphore.mbox[RCS] = GEN8_WAIT_OFFSET(ring, RCS); \
 	ring->semaphore.mbox[VCS] = GEN8_WAIT_OFFSET(ring, VCS); \
 	ring->semaphore.mbox[BCS] = GEN8_WAIT_OFFSET(ring, BCS); \
Signature · 1 line
1.8.5.1
#27 lore raw

PATCH v2 14/15 drm/i915: unleash semaphores on gen8

In reply to Ben Widawsky

Everything should be lined up now to make gen8 semaphores work like they did on previous generations, so just do it.

---
 drivers/gpu/drm/i915/i915_drv.c | 6 ------
 1 file changed, 6 deletions(-)
drivers/gpu/drm/i915/i915_drv.c +0 -6
index 23f8217..980f1ec 100644
@@ -482,12 +482,6 @@ bool i915_semaphore_is_enabled(struct drm_device *dev)
 	if (INTEL_INFO(dev)->gen < 6)
 		return 0;
 
-	/* Until we get further testing... */
-	if (IS_GEN8(dev)) {
-		WARN_ON(!i915_preliminary_hw_support);
-		return 0;
-	}
-
 	if (i915_semaphores >= 0)
 		return i915_semaphores;
 
Signature · 1 line
1.8.5.1
#28 lore raw

PATCH v2 15/15 drm/i915: semaphore debugfs

In reply to Ben Widawsky

Simple debugfs file to display the current state of semaphores. This is useful if you want to see the state without hanging the GPU.

NOTE: This patch is optional to the series.

NOTE2: Like the GPU error state collection, the reads are currently incoherent.

---
 drivers/gpu/drm/i915/i915_debugfs.c | 69 +++++++++++++++++++++++++++++++++++++
 1 file changed, 69 insertions(+)
drivers/gpu/drm/i915/i915_debugfs.c +69 -0
index 6294ffd..1cb578b 100644
@@ -1952,6 +1952,74 @@ static int i915_power_domain_info(struct seq_file *m, void *unused)
 	return 0;
 }
 
+static int i915_semaphore_status(struct seq_file *m, void *unused)
+{
+	struct drm_info_node *node = (struct drm_info_node *) m->private;
+	struct drm_device *dev = node->minor->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_ring_buffer *ring;
+	int i, j, ret;
+
+	if (!i915_semaphore_is_enabled(dev)) {
+		seq_puts(m, "Semaphores are disabled\n");
+		return 0;
+	}
+
+	ret = mutex_lock_interruptible(&dev->struct_mutex);
+	if (ret)
+		return ret;
+
+	if (IS_BROADWELL(dev)) {
+		struct page *page;
+		uint64_t *seqno;
+
+		page = i915_gem_object_get_page(dev_priv->semaphore_obj, 0);
+
+		seqno = (uint64_t *)kmap_atomic(page);
+		for_each_ring(ring, dev_priv, i) {
+			uint64_t offset;
+
+			seq_printf(m, "%s\n", ring->name);
+
+			seq_puts(m, "  Last signal:");
+			for (j = 0; j < I915_NUM_RINGS; j++) {
+				offset = i * I915_NUM_RINGS + j;
+				seq_printf(m, "0x%08llx (0x%02llx) ",
+					   seqno[offset], offset * 8);
+			}
+			seq_putc(m, '\n');
+
+			seq_puts(m, "  Last wait:  ");
+			for (j = 0; j < I915_NUM_RINGS; j++) {
+				offset = i + (j * I915_NUM_RINGS);
+				seq_printf(m, "0x%08llx (0x%02llx) ",
+					   seqno[offset], offset * 8);
+			}
+			seq_putc(m, '\n');
+
+		}
+		kunmap_atomic(seqno);
+	} else {
+		seq_puts(m, "  Last signal:");
+		for_each_ring(ring, dev_priv, i)
+			for (j = 0; j < I915_NUM_RINGS; j++)
+				seq_printf(m, "0x%08x\n", I915_READ(ring->semaphore.signal_mbox[j]));
+		seq_putc(m, '\n');
+	}
+
+	seq_puts(m, "\nSync seqno:\n");
+	for_each_ring(ring, dev_priv, i) {
+		for (j = 0; j < I915_NUM_RINGS; j++) {
+			seq_printf(m, "  0x%08x ", ring->semaphore.sync_seqno[j]);
+		}
+		seq_putc(m, '\n');
+	}
+	seq_putc(m, '\n');
+
+	mutex_unlock(&dev->struct_mutex);
+	return 0;
+}
+
 struct pipe_crc_info {
 	const char *name;
 	struct drm_device *dev;
@@ -3195,6 +3263,7 @@ static const struct drm_info_list i915_debugfs_list[] = {
 	{"i915_energy_uJ", i915_energy_uJ, 0},
 	{"i915_pc8_status", i915_pc8_status, 0},
 	{"i915_power_domain_info", i915_power_domain_info, 0},
+	{"i915_semaphore_status", i915_semaphore_status, 0},
 };
 #define I915_DEBUGFS_ENTRIES ARRAY_SIZE(i915_debugfs_list)
 
Signature · 1 line
1.8.5.1
#29 lore raw
In reply to Ben Widawsky
Quoted 7 lines · Ben Widawsky

Reposting this as a new series since two of the patches dropped off since last time.

Functionally it's the same as before. Like before, the patch "drm/i915:
unleash semaphores on gen8" should probably not be merged as it's not 100% clear where the hang is currently coming from. Everything else should be pretty benign for other platforms.

I've pulled in the first two patches already. For review Damien is signed up (althought he goes on vacation soon) and for greater learning experience he's also agreed to throw in a testcase on top.

We already have a nice stresstest for semaphores (gem_ring_sync_loop), but no real functional test which checks that the batches are indeed correctly ordered. For gpu vs. cpu races we already have a fairly complete set in gem_concurrent_blt, but that has many additional complications we don't really care about for ring2ring syncing.

For each pair of rings R1, R2 where we have copy support (i.e. blt, rendercpy and mediafill) do:
- Throw a busy load onto R1. gem_concurrent_blt just uses lots of buffers for this effect.
- Fill three buffers A, B, C with unique data.
- Copy A to B on ring R1

Then come the three different variants.
- Copy B to C on ring R2, check that C now contains what A originally contained. This is the write->read hazard. gem_concurrent_blt calls this early read.
- Copy C to A on ring R2, check that B now contains what A originally contained. This is the read->write hazard, gem_concurrent_blt calls it overwrite_source.
- Copy C to B on ring R2 and check that B contains what C originally contained. This is the write/write hazard. gem_concurrent_blt doesn't have that since for the cpu case it's too boring.
- As long as we don't allow concurrent reads on different rings testing that one isn't worth it. And even then we could only check whether the ring without the busy load indeed completes much earlier than the other (i.e. both rings would copy a shared buffer to a private buffer). Not worth it at all.

We also have some other tests for cpu access which check for specific bugs where we've in the past lost the last gpu read/last gpu write access breadcrumb. But those only make sense once we have bugs (or more complicated code like e.g. whith the scheduler).

Cheers, Daniel

Quoted 36 lines

Ben Widawsky (15):
drm/i915: Reorder/respace MI instruction definition drm/i915: Don't emit mbox updates without semaphores drm/i915: Move semaphore specific ring members to struct drm/i915: Virtualize the ringbuffer signal func drm/i915: Move ring_begin to signal()
drm/i915: Make semaphore updates more precise drm/i915: gen specific ring init
drm/i915/bdw: implement semaphore signal drm/i915/bdw: implement semaphore wait drm/i915: FORCE_RESTORE for gen8 semaphores drm/i915/bdw: poll semaphores
drm/i915: Extract semaphore error collection drm/i915/bdw: collect semaphore error state drm/i915: unleash semaphores on gen8
drm/i915: semaphore debugfs

 drivers/gpu/drm/i915/i915_debugfs.c     |  69 +++++++
 drivers/gpu/drm/i915/i915_drv.c         |   6 -
 drivers/gpu/drm/i915/i915_drv.h         |   2 +
 drivers/gpu/drm/i915/i915_gem.c         |  10 +-
 drivers/gpu/drm/i915/i915_gem_context.c |   9 +
 drivers/gpu/drm/i915/i915_gpu_error.c   |  75 ++++++--
 drivers/gpu/drm/i915/i915_reg.h         |  58 +++---
 drivers/gpu/drm/i915/intel_ringbuffer.c | 329 ++++++++++++++++++++++++--------
 drivers/gpu/drm/i915/intel_ringbuffer.h |  87 ++++++++-
 9 files changed, 508 insertions(+), 137 deletions(-)
Signature · 6 lines
1.8.5.1

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
#30 lore raw
Quoted 13 lines · Daniel Vetter
Quoted 7 lines · Ben Widawsky

Reposting this as a new series since two of the patches dropped off since last time.

Functionally it's the same as before. Like before, the patch "drm/i915:
unleash semaphores on gen8" should probably not be merged as it's not 100% clear where the hang is currently coming from. Everything else should be pretty benign for other platforms.

I've pulled in the first two patches already. For review Damien is signed up (althought he goes on vacation soon) and for greater learning experience he's also agreed to throw in a testcase on top.

Quoted 8 lines

We already have a nice stresstest for semaphores (gem_ring_sync_loop), but no real functional test which checks that the batches are indeed correctly ordered. For gpu vs. cpu races we already have a fairly complete set in gem_concurrent_blt, but that has many additional complications we don't really care about for ring2ring syncing.

For each pair of rings R1, R2 where we have copy support (i.e. blt, rendercpy and mediafill) do:

mediafill and rendercopy both use the render ring, so only one of them is useful here, right?

Might need to investigate similar blit batches for other rings, if possible at all.

Signature · 1 line
Damien
#31 lore raw
Quoted 20 lines · Damien Lespiau
Quoted 19 lines · Daniel Vetter
Quoted 7 lines · Ben Widawsky

Reposting this as a new series since two of the patches dropped off since last time.

Functionally it's the same as before. Like before, the patch "drm/i915:
unleash semaphores on gen8" should probably not be merged as it's not 100% clear where the hang is currently coming from. Everything else should be pretty benign for other platforms.

I've pulled in the first two patches already. For review Damien is signed up (althought he goes on vacation soon) and for greater learning experience he's also agreed to throw in a testcase on top.

We already have a nice stresstest for semaphores (gem_ring_sync_loop), but no real functional test which checks that the batches are indeed correctly ordered. For gpu vs. cpu races we already have a fairly complete set in gem_concurrent_blt, but that has many additional complications we don't really care about for ring2ring syncing.

Quoted 5 lines
Quoted 2 lines

For each pair of rings R1, R2 where we have copy support (i.e. blt, rendercpy and mediafill) do:

mediafill and rendercopy both use the render ring, so only one of them is useful here, right?

Oh dear, somehow I've thought that was launched on the vcs like a compute job. So yeah, we can only test between blt and render then. I guess I should read the patches more carefully ;-)

Quoted 2 lines

Might need to investigate similar blit batches for other rings, if possible at all.

Yeah, otoh we should be able to test the general logic with this. And if there's a type somewhere in the vcs/vecs tables, well mea culpa. -Daniel

Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch