Skip to contentSkip to conversation

v4l2: add new V4L2_PIX_FMT_RGB666 pixel format.

PATCH Superseded Denis Carikli 2 participants 5 messages Jan 22, 2014

Subsystems (5)

v6 of 14 Superseded Latest is v14 →

lore
Share & tools
lore
#0 lore raw

PATCH v6 1/7 v4l2: add new V4L2_PIX_FMT_RGB666 pixel format.

That new macro is needed by the imx_drm staging driver
for supporting the QVGA display of the eukrea-cpuimx51 board.

---
ChangeLog v5->v6:
- Remove people not concerned by this patch from the Cc list.

ChangeLog v3->v4:
- Added Laurent Pinchart's Ack.

ChangeLog v2->v3:
- Added some interested people in the Cc list.
- Added Mauro Carvalho Chehab's Ack.
- Added documentation.

---
 .../DocBook/media/v4l/pixfmt-packed-rgb.xml        |   78 ++++++++++++++++++++
 include/uapi/linux/videodev2.h                     |    1 +
 2 files changed, 79 insertions(+)
Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml +78 -0
index 166c8d6..f6a3e84 100644
@@ -279,6 +279,45 @@ colorspace <constant>V4L2_COLORSPACE_SRGB</constant>.</para>
 	    <entry></entry>
 	    <entry></entry>
 	  </row>
+	  <row id="V4L2-PIX-FMT-RGB666">
+	    <entry><constant>V4L2_PIX_FMT_RGB666</constant></entry>
+	    <entry>'RGBH'</entry>
+	    <entry></entry>
+	    <entry>r<subscript>5</subscript></entry>
+	    <entry>r<subscript>4</subscript></entry>
+	    <entry>r<subscript>3</subscript></entry>
+	    <entry>r<subscript>2</subscript></entry>
+	    <entry>r<subscript>1</subscript></entry>
+	    <entry>r<subscript>0</subscript></entry>
+	    <entry>g<subscript>5</subscript></entry>
+	    <entry>g<subscript>4</subscript></entry>
+	    <entry></entry>
+	    <entry>g<subscript>3</subscript></entry>
+	    <entry>g<subscript>2</subscript></entry>
+	    <entry>g<subscript>1</subscript></entry>
+	    <entry>g<subscript>0</subscript></entry>
+	    <entry>b<subscript>5</subscript></entry>
+	    <entry>b<subscript>4</subscript></entry>
+	    <entry>b<subscript>3</subscript></entry>
+	    <entry>b<subscript>2</subscript></entry>
+	    <entry></entry>
+	    <entry>b<subscript>1</subscript></entry>
+	    <entry>b<subscript>0</subscript></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	  </row>
 	  <row id="V4L2-PIX-FMT-BGR24">
 	    <entry><constant>V4L2_PIX_FMT_BGR24</constant></entry>
 	    <entry>'BGR3'</entry>
@@ -781,6 +820,45 @@ defined in error. Drivers may interpret them as in <xref
 	    <entry></entry>
 	    <entry></entry>
 	  </row>
+	  <row><!-- id="V4L2-PIX-FMT-RGB666" -->
+	    <entry><constant>V4L2_PIX_FMT_RGB666</constant></entry>
+	    <entry>'RGBH'</entry>
+	    <entry></entry>
+	    <entry>r<subscript>5</subscript></entry>
+	    <entry>r<subscript>4</subscript></entry>
+	    <entry>r<subscript>3</subscript></entry>
+	    <entry>r<subscript>2</subscript></entry>
+	    <entry>r<subscript>1</subscript></entry>
+	    <entry>r<subscript>0</subscript></entry>
+	    <entry>g<subscript>5</subscript></entry>
+	    <entry>g<subscript>4</subscript></entry>
+	    <entry></entry>
+	    <entry>g<subscript>3</subscript></entry>
+	    <entry>g<subscript>2</subscript></entry>
+	    <entry>g<subscript>1</subscript></entry>
+	    <entry>g<subscript>0</subscript></entry>
+	    <entry>b<subscript>5</subscript></entry>
+	    <entry>b<subscript>4</subscript></entry>
+	    <entry>b<subscript>3</subscript></entry>
+	    <entry>b<subscript>2</subscript></entry>
+	    <entry></entry>
+	    <entry>b<subscript>1</subscript></entry>
+	    <entry>b<subscript>0</subscript></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	    <entry></entry>
+	  </row>
 	  <row><!-- id="V4L2-PIX-FMT-BGR24" -->
 	    <entry><constant>V4L2_PIX_FMT_BGR24</constant></entry>
 	    <entry>'BGR3'</entry>
include/uapi/linux/videodev2.h +1 -0
index 437f1b0..e8ff410 100644
@@ -294,6 +294,7 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16  RGB-5-5-5 BE  */
 #define V4L2_PIX_FMT_RGB565X v4l2_fourcc('R', 'G', 'B', 'R') /* 16  RGB-5-6-5 BE  */
 #define V4L2_PIX_FMT_BGR666  v4l2_fourcc('B', 'G', 'R', 'H') /* 18  BGR-6-6-6	  */
+#define V4L2_PIX_FMT_RGB666  v4l2_fourcc('R', 'G', 'B', 'H') /* 18  RGB-6-6-6	  */
 #define V4L2_PIX_FMT_BGR24   v4l2_fourcc('B', 'G', 'R', '3') /* 24  BGR-8-8-8     */
 #define V4L2_PIX_FMT_RGB24   v4l2_fourcc('R', 'G', 'B', '3') /* 24  RGB-8-8-8     */
 #define V4L2_PIX_FMT_BGR32   v4l2_fourcc('B', 'G', 'R', '4') /* 32  BGR-8-8-8-8   */
Signature · 1 line
1.7.9.5
#1 lore raw

PATCH v6 4/7 staging: imx-drm: Use de-active and pixelclk-active display-timings.

If de-active and/or pixelclk-active properties were set in the display-timings DT node, they were not used.

Instead the data-enable and the pixel data clock polarity were hardcoded.

This change is needed for making the eukrea-cpuimx51
QVGA display work.

Cc David Airlie <[email protected]>
Cc Eric Bénard <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Sascha Hauer <[email protected]>
Cc Shawn Guo <[email protected]>

---
ChangeLog v5->v6:
- Remove people not concerned by this patch from the Cc list.
- Removed wrong coments from the code.
- Corrected the code style of the "if (!!val)"

ChangeLog v3->v4:
- The old patch was named "staging: imx-drm: ipuv3-crtc: don't harcode some mode".
- Reworked the patch entierly: we now takes the mode flags from the device tree.

ChangeLog v2->v3:
- Added some interested people in the Cc list.
- Ajusted the flags to match the changes in "drm: Add the lacking DRM_MODE_FLAG_* for matching the DISPLAY_FLAGS_*"

---
 drivers/staging/imx-drm/imx-drm.h          |    3 +++
 drivers/staging/imx-drm/ipuv3-crtc.c       |    8 ++++++--
 drivers/staging/imx-drm/parallel-display.c |   27 +++++++++++++++++++++++++++
 3 files changed, 36 insertions(+), 2 deletions(-)
drivers/staging/imx-drm/imx-drm.h +3 -0
index ae90c9c..dfdc180 100644
@@ -5,6 +5,9 @@
 
 #define IPU_PIX_FMT_GBR24	v4l2_fourcc('G', 'B', 'R', '3')
 
+#define IMXDRM_MODE_FLAG_DE_HIGH		(1<<0)
+#define IMXDRM_MODE_FLAG_PIXDATA_POSEDGE	(1<<1)
+
 struct drm_crtc;
 struct drm_connector;
 struct drm_device;
drivers/staging/imx-drm/ipuv3-crtc.c +6 -2
index ce6ba98..ce8e6e4 100644
@@ -156,8 +156,12 @@ static int ipu_crtc_mode_set(struct drm_crtc *crtc,
 	if (mode->flags & DRM_MODE_FLAG_PVSYNC)
 		sig_cfg.Vsync_pol = 1;
 
-	sig_cfg.enable_pol = 1;
-	sig_cfg.clk_pol = 1;
+	if (mode->private_flags & IMXDRM_MODE_FLAG_DE_HIGH)
+		sig_cfg.enable_pol = 1;
+
+	if (mode->private_flags & IMXDRM_MODE_FLAG_PIXDATA_POSEDGE)
+		sig_cfg.clk_pol = 1;
+
 	sig_cfg.width = mode->hdisplay;
 	sig_cfg.height = mode->vdisplay;
 	sig_cfg.pixel_fmt = out_pixel_fmt;
drivers/staging/imx-drm/parallel-display.c +27 -0
index bb71d6d..02aa4da 100644
@@ -74,7 +74,34 @@ static int imx_pd_connector_get_modes(struct drm_connector *connector)
 
 	if (np) {
 		struct drm_display_mode *mode = drm_mode_create(connector->dev);
+		struct device_node *timings_np;
+		struct device_node *mode_np;
+		u32 val;
+
 		of_get_drm_display_mode(np, &imxpd->mode, 0);
+
+		timings_np = of_get_child_by_name(np, "display-timings");
+		if (timings_np) {
+			/* get the display mode node */
+			mode_np = of_parse_phandle(timings_np,
+						   "native-mode", 0);
+			if (!mode_np)
+				mode_np = of_get_next_child(timings_np, NULL);
+
+			/* set de-active to 1 if not set */
+			of_property_read_u32(mode_np, "de-active", &val);
+			if (val) {
+				imxpd->mode.private_flags |=
+					IMXDRM_MODE_FLAG_DE_HIGH;
+			}
+
+			/* set pixelclk-active to 1 if not set */
+			of_property_read_u32(mode_np, "pixelclk-active", &val);
+			if (val) {
+				imxpd->mode.private_flags |=
+					IMXDRM_MODE_FLAG_PIXDATA_POSEDGE;
+			}
+		}
 		drm_mode_copy(mode, &imxpd->mode);
 		mode->type |= DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
 		drm_mode_probed_add(connector, mode);
Signature · 6 lines
1.7.9.5

_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
#2 lore raw

Re: [PATCHv6 4/7] staging: imx-drm: Use de-active and pixelclk-active display-timings.

Quoted 9 lines · Denis Carikli

If de-active and/or pixelclk-active properties were set in the display-timings DT node, they were not used.

Instead the data-enable and the pixel data clock polarity were hardcoded.

This change is needed for making the eukrea-cpuimx51
QVGA display work.

Quoted 9 lines
Cc David Airlie <[email protected]>
Cc Eric B?nard <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc Philipp Zabel <[email protected]>
Cc Sascha Hauer <[email protected]>
Cc Shawn Guo <[email protected]>
Cc dri-devel at lists.freedesktop.org
Cc driverdev-devel at linuxdriverproject.org
Cc linux-arm-kernel at lists.infradead.org

These CC blocks are massive... What's the point of them?

Quoted 9 lines
drivers/staging/imx-drm/parallel-display.c +6 -0
 	if (np) {
 		struct drm_display_mode *mode = drm_mode_create(connector->dev);
+		struct device_node *timings_np;
+		struct device_node *mode_np;
+		u32 val;
+
 		of_get_drm_display_mode(np, &imxpd->mode, 0);
+
+		timings_np = of_get_child_by_name(np, "display-timings");

drivers/staging/imx-drm/parallel-display.c static int imx_pd_connector_get_modes(struct drm_connector *connector) · line 93

Quoted 10 lines
drivers/staging/imx-drm/parallel-display.c +10 -0
+		if (timings_np) {
+			/* get the display mode node */
+			mode_np = of_parse_phandle(timings_np,
+						   "native-mode", 0);
+			if (!mode_np)
+				mode_np = of_get_next_child(timings_np, NULL);
+
+			/* set de-active to 1 if not set */
+			of_property_read_u32(mode_np, "de-active", &val);
+			if (val) {

If of_property_read_u32() fails then val is uninitialized.

regards,
dan carpenter

#3 lore raw

PATCH v6 6/7 ARM: dts: mbimx51sd: Add display support.

In reply to Denis Carikli

The CMO-QVGA, DVI-SVGA and DVI-VGA are added.

Cc Eric B?nard <[email protected]>
Cc Sascha Hauer <[email protected]>
Cc Shawn Guo <[email protected]>
Cc linux-arm-kernel at lists.infradead.org

---
ChangeLog v5->v6:
- Reordered the Cc list.

ChangeLog v3->v5:
- Updated to new GPIO defines.
- Updated to new licenses checkpatch requirements.
- one whitespace cleanup.

ChangeLog v2->v3:
- Splitted out from the patch that added support for the cpuimx51/mbimxsd51 boards.
- This patch now only adds display support.
- Added some interested people in the Cc list, and removed some people that might be annoyed by the receiving of that patch which is unrelated to their subsystem.
- rebased and reworked the dts displays addition.
- Also rebased and reworked the fsl,pins usage.

---
 .../imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts  |   55 ++++++++++++++++++++
 .../imx51-eukrea-mbimxsd51-baseboard-dvi-svga.dts  |   42 +++++++++++++++
 .../imx51-eukrea-mbimxsd51-baseboard-dvi-vga.dts   |   42 +++++++++++++++
 .../boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts  |   13 +++++
 4 files changed, 152 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts
 create mode 100644 arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-dvi-svga.dts
 create mode 100644 arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-dvi-vga.dts
arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts new file +55 -0
new file mode 100644
index 0000000..f37d65b
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2013 Eukr?a Electromatique <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx51-eukrea-mbimxsd51-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD51 with the CMO-QVGA Display";
+	compatible = "eukrea,mbimxsd51-baseboard-cmo-qvga", "eukrea,mbimxsd51-baseboard", "eukrea,cpuimx51", "fsl,imx51";
+
+	reg_lcd_3v3: lcd-en {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&display {
+	display-supply = <&reg_lcd_3v3>;
+	status = "okay";
+	display-timings {
+		model = "CMO-QVGA";
+		bits-per-pixel = <16>;
+		cmoqvga {
+			native-mode;
+			clock-frequency = <6500000>;
+			hactive = <320>;
+			vactive = <240>;
+			hfront-porch = <20>;
+			hback-porch = <38>;
+			vfront-porch = <4>;
+			vback-porch = <15>;
+			hsync-len = <30>;
+			vsync-len = <3>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <0>;
+			pixelclk-active = <1>;
+		};
+	};
+};
arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-dvi-svga.dts new file +42 -0

42 lines not on this page · raw message

arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-dvi-vga.dts new file +42 -0

42 lines not on this page · raw message

arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +13 -0
index 6774c66..06f987e 100644
@@ -23,6 +23,15 @@
 	model = "Eukrea CPUIMX51";
 	compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51";
 
+	display: display at di0 {
+		compatible = "fsl,imx-parallel-display";
+		crtcs = <&ipu 0>;
+		interface-pix-fmt = "rgb666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1>;
+		status = "disabled";
+	};
+
 	gpio_keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -124,6 +133,10 @@
 			>;
 		};
 
+		pinctrl_ipu_disp1: ipudisp1grp {
+			fsl,pins = <MX51_IPU_DISP1_PINGRP1>;
+		};
+
 		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
 			fsl,pins = <
 				MX51_PAD_CSI1_D9__GPIO3_13 0x1f5
Signature · 1 line
1.7.9.5
#4 lore raw

PATCH v6 7/7 ARM: dts: mbimx51sd: Add CMO-QVGA backlight support.

In reply to Denis Carikli
Cc Eric B?nard <[email protected]>
Cc Sascha Hauer <[email protected]>
Cc Shawn Guo <[email protected]>
Cc linux-arm-kernel at lists.infradead.org

---
ChangeLog v5->v6:
- Reordered the Cc list.

ChangeLog v3->v5:
- Updated to the new GPIO defines.

ChangeLog v2->v3:
- Splitted out from the patch that added support for the cpuimx51/mbimxsd51 boards.
- This patch now only adds backlight support.
- Added some interested people in the Cc list, and removed some people that might be annoyed by the receiving of that patch which is unrelated to their subsystem.

---
 .../imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts  |    8 ++++++++
 1 file changed, 8 insertions(+)
arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard-cmo-qvga.dts +8 -0
index f37d65b..f8f5abe 100644
@@ -17,6 +17,14 @@
 	model = "Eukrea MBIMXSD51 with the CMO-QVGA Display";
 	compatible = "eukrea,mbimxsd51-baseboard-cmo-qvga", "eukrea,mbimxsd51-baseboard", "eukrea,cpuimx51", "fsl,imx51";
 
+	backlight {
+		compatible = "gpio-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_1>;
+		gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		default-brightness-level = <1>;
+	};
+
 	reg_lcd_3v3: lcd-en {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
Signature · 1 line
1.7.9.5