nitrogen6x: README: Do not refer to MAINTAINERS file
PATCH 1/1 nitrogen6x: README: Do not refer to MAINTAINERS file
From: Fabio Estevam <[email protected]>
MAINTAINERS file has been removed from the project.
Replace its reference with 'boards.cfg' file instead.
--- board/boundary/nitrogen6x/README | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
board/boundary/nitrogen6x/README +1 -1
@@ -70,7 +70,7 @@ To build U-Boot for one of the Nitrogen6x or SabreLite board: make Note that 'nitrogen6x' is a placeholder. The complete list of supported -board configurations is shown in tha MAINTAINERS file: +board configurations is shown in the boards.cfg file: nitrogen6q i.MX6Q/6D 1GB nitrogen6dl i.MX6DL 1GB nitrogen6s i.MX6S 512MB
Signature · 1 line
1.8.1.2
PATCH 1/1 nitrogen6x: README: Do not refer to MAINTAINERS file
Quoted 17 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
MAINTAINERSfile has been removed from the project.Replace its reference with 'boards.cfg' file instead.
Signed-off-by Fabio Estevam <[email protected]>--- board/boundary/nitrogen6x/README | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)board/boundary/nitrogen6x/README +0
-0
board/boundary/nitrogen6x/README To build U-Boot for one of the Nitrogen6x or SabreLite board: · line 76
Quoted 8 lines
board/boundary/nitrogen6x/README +1
-1@@ -70,7 +70,7 @@ To build U-Boot for one of the Nitrogen6x or SabreLite board: make Note that 'nitrogen6x' is a placeholder. The complete list of supported -board configurations is shown in tha MAINTAINERS file: +board configurations is shown in the boards.cfg file: nitrogen6q i.MX6Q/6D 1GB nitrogen6dl i.MX6DL 1GB nitrogen6s i.MX6S 512MB
PATCH 1/1 nitrogen6x: README: Do not refer to MAINTAINERS file
In reply to Fabio EstevamHi Fabio,
Quoted 8 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
MAINTAINERSfile has been removed from the project.Replace its reference with 'boards.cfg' file instead.
Signed-off-by Fabio Estevam <[email protected]>---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================