Skip to contentSkip to conversation

nitrogen6x: README: Do not refer to MAINTAINERS file

PATCH New Fabio Estevam 3 participants 3 messages Jan 24, 2014 – Jan 26, 2014

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 nitrogen6x: README: Do not refer to MAINTAINERS file

From: Fabio Estevam <[email protected]>

MAINTAINERS file has been removed from the project.

Replace its reference with 'boards.cfg' file instead.

---
 board/boundary/nitrogen6x/README | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
board/boundary/nitrogen6x/README +1 -1
index 6f449be..9d84265 100644
@@ -70,7 +70,7 @@ To build U-Boot for one of the Nitrogen6x or SabreLite board:
 	make
 
 Note that 'nitrogen6x' is a placeholder. The complete list of supported
-board configurations is shown in tha MAINTAINERS file:
+board configurations is shown in the boards.cfg file:
 	nitrogen6q		i.MX6Q/6D	1GB
 	nitrogen6dl		i.MX6DL		1GB
 	nitrogen6s		i.MX6S		512MB
Signature · 1 line
1.8.1.2
#1 lore raw

PATCH 1/1 nitrogen6x: README: Do not refer to MAINTAINERS file

Quoted 17 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

MAINTAINERS file has been removed from the project.

Replace its reference with 'boards.cfg' file instead.

---
  board/boundary/nitrogen6x/README | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
board/boundary/nitrogen6x/README +0 -0
index 6f449be..9d84265 100644

board/boundary/nitrogen6x/README To build U-Boot for one of the Nitrogen6x or SabreLite board: · line 76

Quoted 8 lines
board/boundary/nitrogen6x/README +1 -1
@@ -70,7 +70,7 @@ To build U-Boot for one of the Nitrogen6x or SabreLite board:
  	make
 
  Note that 'nitrogen6x' is a placeholder. The complete list of supported
-board configurations is shown in tha MAINTAINERS file:
+board configurations is shown in the boards.cfg file:
  	nitrogen6q		i.MX6Q/6D	1GB
  	nitrogen6dl		i.MX6DL		1GB
  	nitrogen6s		i.MX6S		512MB
#2 lore raw

PATCH 1/1 nitrogen6x: README: Do not refer to MAINTAINERS file

In reply to Fabio Estevam

Hi Fabio,

Quoted 8 lines · Fabio Estevam

From: Fabio Estevam <[email protected]>

MAINTAINERS file has been removed from the project.

Replace its reference with 'boards.cfg' file instead.

---

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================