Initial support for Silica Pengwyn board
v4 cover Initial support for Silica Pengwyn board
Initial support for Silica Pengwyn board
arch/arm/include/asm/arch-am33xx/ddr_defs.h | 16 +++ board/silica/pengwyn/Makefile | 13 ++ board/silica/pengwyn/board.c | 207 ++++++++++++++++++++++++++ board/silica/pengwyn/board.h | 15 ++ board/silica/pengwyn/mux.c | 109 ++++++++++++++ boards.cfg | 1 + include/configs/pengwyn.h | 208 +++++++++++++++++++++++++++ 7 files changed, 569 insertions(+) create mode 100644 board/silica/pengwyn/Makefile create mode 100644 board/silica/pengwyn/board.c create mode 100644 board/silica/pengwyn/board.h create mode 100644 board/silica/pengwyn/mux.c create mode 100644 include/configs/pengwyn.h
Signature · 1 line
1.7.9.5
PATCH v4 1/1 Initial support for Silica Pengwyn board
This patch add support for the Silica Pengwyn board [1] The board is based on a TI AM3354 CPU [2]
All jumpers removed it will boot from the SDcard, the console is on UART1 accessible via the FDTI -> USB. The on board NAND flash is supported and can act as boot medium, depending on jumper settings. USB Host, USB Device and Ethernet are also provided but untested.
[1]
http://www.silica.com/product/silica-pengwyn-board.html
[2]
http://www.ti.com/product/am3354
---
Changes for v2:
- Changed license type to GPL 2.0+
- Coding style cleanup
Changes for v3:
- added board description
- Fixed more braces, comments and white space
Changed for v4:
- squashed patches
- cleaned up default env settings and indentation
- removed unused NOR flash references
- removed CONFIG_BOARD_LATE_INIT as requested by Tom Rini
--- arch/arm/include/asm/arch-am33xx/ddr_defs.h | 16 +++ board/silica/pengwyn/Makefile | 13 ++ board/silica/pengwyn/board.c | 207 ++++++++++++++++++++++++++ board/silica/pengwyn/board.h | 15 ++ board/silica/pengwyn/mux.c | 109 ++++++++++++++ boards.cfg | 1 + include/configs/pengwyn.h | 208 +++++++++++++++++++++++++++ 7 files changed, 569 insertions(+) create mode 100644 board/silica/pengwyn/Makefile create mode 100644 board/silica/pengwyn/board.c create mode 100644 board/silica/pengwyn/board.h create mode 100644 board/silica/pengwyn/mux.c create mode 100644 include/configs/pengwyn.h
arch/arm/include/asm/arch-am33xx/ddr_defs.h +16 -0
@@ -58,6 +58,22 @@#define MT41J128MJT125_PHY_FIFO_WE 0x100#define MT41J128MJT125_IOCTRL_VALUE 0x18B +/* Micron MT41K128M16JT-187E */ +#define MT41K128MJT187E_EMIF_READ_LATENCY 0x06 +#define MT41K128MJT187E_EMIF_TIM1 0x0888B3DB +#define MT41K128MJT187E_EMIF_TIM2 0x36337FDA +#define MT41K128MJT187E_EMIF_TIM3 0x501F830F +#define MT41K128MJT187E_EMIF_SDCFG 0x61C04AB2 +#define MT41K128MJT187E_EMIF_SDREF 0x0000093B +#define MT41K128MJT187E_ZQ_CFG 0x50074BE4 +#define MT41K128MJT187E_RATIO 0x40 +#define MT41K128MJT187E_INVERT_CLKOUT 0x1 +#define MT41K128MJT187E_RD_DQS 0x3B +#define MT41K128MJT187E_WR_DQS 0x85 +#define MT41K128MJT187E_PHY_WR_DATA 0xC1 +#define MT41K128MJT187E_PHY_FIFO_WE 0x100 +#define MT41K128MJT187E_IOCTRL_VALUE 0x18B +/* Micron MT41J64M16JT-125 */ #define MT41J64MJT125_EMIF_SDCFG 0x61C04A32
board/silica/pengwyn/Makefile new file +13 -0
@@ -0,0 +1,13 @@ +# +# Makefile +# +# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_NOR_BOOT),y) +obj-y := mux.o +endif + +obj-y += board.o
board/silica/pengwyn/board.c new file +207 -0
207 lines not on this page · raw message
board/silica/pengwyn/board.h new file +15 -0
@@ -0,0 +1,15 @@ +/* +* board.h +* +* Copyright (C) 2013 Lothar Felten <[email protected]> +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +void enable_uart0_pin_mux (void ); +void enable_board_pin_mux (void ); + +#endif
board/silica/pengwyn/mux.c new file +109 -0
109 lines not on this page · raw message
boards.cfg +1 -0
@@ -255,6 +255,7 @@ Active arm armv7 am33xx phytec pcm051 Active arm armv7 am33xx siemens dxr2 dxr2 - Roger Meier <[email protected]> Active arm armv7 am33xx siemens pxm2 pxm2 - Roger Meier <[email protected]> Active arm armv7 am33xx siemens rut rut - Roger Meier <[email protected]> +Active arm armv7 am33xx silica pengwyn pengwyn - Lothar Felten <[email protected]> Active arm armv7 am33xx ti am335x am335x_boneblack am335x_evm:SERIAL1,CONS_INDEX=1,EMMC_BOOT Tom Rini <[email protected]> Active arm armv7 am33xx ti am335x am335x_evm am335x_evm:SERIAL1,CONS_INDEX=1,NAND Tom Rini <[email protected]> Active arm armv7 am33xx ti am335x am335x_evm_nor am335x_evm:SERIAL1,CONS_INDEX=1,NAND,NOR Tom Rini <[email protected]>
include/configs/pengwyn.h new file +208 -0
208 lines not on this page · raw message
Signature · 1 line
1.7.9.5
PATCH v4 1/1 Initial support for Silica Pengwyn board
Quoted 7 lines · Lothar Felten
This patch add support for the Silica Pengwyn board [1] The board is based on a TI AM3354 CPU [2]
All jumpers removed it will boot from the SDcard, the console is on UART1 accessible via the FDTI -> USB. The on board NAND flash is supported and can act as boot medium, depending on jumper settings. USB Host, USB Device and Ethernet are also provided but untested.
Quoted 6 lines
[1]
http://www.silica.com/product/silica-pengwyn-board.html
[2]
http://www.ti.com/product/am3354Signed-off-by Lothar Felten <[email protected]>
Applied to u-boot-ti/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140221/44ab6506/attachment.pgp>