DT support for kirkwood based Synology NAS boxes
Subsystems (4)
v4 cover DT support for kirkwood based Synology NAS boxes
This patchset adds support for around 30 kirkwood bases Synology NAS boxes. Patch #1 generalized the qnap power off driver so that it can also be used for Synology devices. Patch #2 and #3 document vendor prefixes and i2c trivial devices. Patch #4 adds the synology DT files.
v2:
Typo fix in qnap-poweroff.c
Use ricoy stock ticker instead of ricoh
Describe the lego structure of the hardware
v3:
Merge synology dtsi files into a single dtsi file
v4:
Various minor fixes to synology dtsi file
Andrew Lunn (3):
Power: Reset: Generalize qnap-poweroff to with on Synology devices.
DT: Vendor prefixes: Add ricoh, ssi and synology
DT: i2c: Trivial: Add sii, s35390a, fix ricoh vendor prefix
Ben Peddell (1):
ARM: Kirkwood: Add support for many Synology NAS devices
.../devicetree/bindings/i2c/trivial-devices.txt | 3 +- .../bindings/power_supply/qnap-poweroff.txt | 5 +- .../devicetree/bindings/vendor-prefixes.txt | 3 + arch/arm/boot/dts/Makefile | 15 + arch/arm/boot/dts/kirkwood-ds109.dts | 41 + arch/arm/boot/dts/kirkwood-ds110jv10.dts | 41 + arch/arm/boot/dts/kirkwood-ds111.dts | 44 ++ arch/arm/boot/dts/kirkwood-ds112.dts | 48 ++ arch/arm/boot/dts/kirkwood-ds209.dts | 44 ++ arch/arm/boot/dts/kirkwood-ds210.dts | 46 ++ arch/arm/boot/dts/kirkwood-ds212.dts | 47 ++ arch/arm/boot/dts/kirkwood-ds212j.dts | 41 + arch/arm/boot/dts/kirkwood-ds409.dts | 48 ++ arch/arm/boot/dts/kirkwood-ds409slim.dts | 40 + arch/arm/boot/dts/kirkwood-ds411.dts | 52 ++ arch/arm/boot/dts/kirkwood-ds411j.dts | 48 ++ arch/arm/boot/dts/kirkwood-ds411slim.dts | 48 ++ arch/arm/boot/dts/kirkwood-rs212.dts | 48 ++ arch/arm/boot/dts/kirkwood-rs409.dts | 44 ++ arch/arm/boot/dts/kirkwood-rs411.dts | 44 ++ arch/arm/boot/dts/kirkwood-synology.dtsi | 871 +++++++++++++++++++++ drivers/power/reset/qnap-poweroff.c | 46 +- 22 files changed, 1655 insertions(+), 12 deletions(-) create mode 100644 arch/arm/boot/dts/kirkwood-ds109.dts create mode 100644 arch/arm/boot/dts/kirkwood-ds110jv10.dts create mode 100644 arch/arm/boot/dts/kirkwood-ds111.dts create mode 100644 arch/arm/boot/dts/kirkwood-ds112.dts create mode 100644 arch/arm/boot/dts/kirkwood-ds209.dts create mode 100644 arch/arm/boot/dts/kirkwood-ds210.dts create mode 100644 arch/arm/boot/dts/kirkwood-ds212.dts create mode 100644 arch/arm/boot/dts/kirkwood-ds212j.dts create mode 100644 arch/arm/boot/dts/kirkwood-ds409.dts create mode 100644 arch/arm/boot/dts/kirkwood-ds409slim.dts create mode 100644 arch/arm/boot/dts/kirkwood-ds411.dts create mode 100644 arch/arm/boot/dts/kirkwood-ds411j.dts create mode 100644 arch/arm/boot/dts/kirkwood-ds411slim.dts create mode 100644 arch/arm/boot/dts/kirkwood-rs212.dts create mode 100644 arch/arm/boot/dts/kirkwood-rs409.dts create mode 100644 arch/arm/boot/dts/kirkwood-rs411.dts create mode 100644 arch/arm/boot/dts/kirkwood-synology.dtsi
Signature · 1 line
1.8.3.2
PATCH v4 1/4 Power: Reset: Generalize qnap-poweroff to with on Synology devices.
From: Andrew Lunn <[email protected]>
The Synology NAS devices use a very similar mechanism to QNAP NAS devices to power off. Both send a single charactor command to a PIC, over the second serial port. However the baud rate and the command differ. Generalize the driver to support this.
--- .../bindings/power_supply/qnap-poweroff.txt | 5 ++- drivers/power/reset/qnap-poweroff.c | 46 +++++++++++++++++----- 2 files changed, 40 insertions(+), 11 deletions(-)
Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt +4 -1
@@ -6,8 +6,11 @@ Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the microcontroller to turn the power off. This driver adds a handler to pm_power_off which is called to turn the power off. +Synology NAS devices use a similar scheme, but a different baud rate, +9600, and a different character, '1'. + Required Properties: -- compatible: Should be "qnap,power-off" +- compatible: Should be "qnap,power-off" or "synology,power-off" - reg: Address and length of the register set for UART1 - clocks: tclk clock
drivers/power/reset/qnap-poweroff.c +36 -10
84 lines not on this page · raw message
Signature · 1 line
1.8.3.2
PATCH v4 1/4 Power: Reset: Generalize qnap-poweroff to with on Synology devices.
Hello-
Few nits below.
Quoted 22 lines · klightspeed at killerwolves.net
From: Andrew Lunn <[email protected]>
The Synology NAS devices use a very similar mechanism to QNAP NAS devices to power off. Both send a single charactor command to a PIC, over the second serial port. However the baud rate and the command differ. Generalize the driver to support this.
Signed-off-by Andrew Lunn <[email protected]>Acked-by Jason Cooper <[email protected]>Cc Anton Vorontsov <[email protected]>Cc Dmitry Eremin-Solenikov <[email protected]>Cc David Woodhouse <[email protected]>--- .../bindings/power_supply/qnap-poweroff.txt | 5 ++- drivers/power/reset/qnap-poweroff.c | 46 +++++++++++++++++----- 2 files changed, 40 insertions(+), 11 deletions(-)Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt +0
-0
Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the · line 13
Quoted 9 lines
Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt +4
-1@@ -6,8 +6,11 @@ Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the microcontroller to turn the power off. This driver adds a handler to pm_power_off which is called to turn the power off. +Synology NAS devices use a similar scheme, but a different baud rate, +9600, and a different character, '1'. + Required Properties: -- compatible: Should be "qnap,power-off" +- compatible: Should be "qnap,power-off" or "synology,power-off"
Hmm.. Neither 'qnap' or 'synology' are described in Documentation/devicetree/bindings/vendor-prefixes.txt. Perhaps they should be added?
Quoted 29 lines
Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt +0
-0- reg: Address and length of the register set for UART1 - clocks: tclk clockdrivers/power/reset/qnap-poweroff.c +12
-1@@ -1,5 +1,5 @@/* -* QNAP Turbo NAS Board power off +* QNAP Turbo NAS Board power off. Can also be used on Synology devices. * * Copyright (C) 2012 Andrew Lunn <[email protected]> * @@ -25,17 +25,42 @@#define UART1_REG (x) (base + ((UART_##x) << 2)) +struct power_off_cfg { +u32 baud; +char cmd; +}; + +static const struct power_off_cfg qnap_power_off_cfg = { + .baud =19200 , + .cmd ='A' , +}; + +static const struct power_off_cfg synology_power_off_cfg = {
drivers/power/reset/qnap-poweroff.c line 48
Quoted 10 lines
drivers/power/reset/qnap-poweroff.c +10
-0+ .baud = 9600, + .cmd = '1', +}; + +static const struct of_device_id qnap_power_off_of_match_table[] = { + { .compatible ="qnap,power-off" , + .data = (void *) &qnap_power_off_cfg, + }, + { .compatible ="synology,power-off" , + .data = (void *) &synology_power_off_cfg,
The casts here should not be necessary.
drivers/power/reset/qnap-poweroff.c line 55
Quoted 7 lines
drivers/power/reset/qnap-poweroff.c +5
-0+ }, + {} +}; +static void __iomem *base;static unsigned long tclk; +static struct power_off_cfg *cfg;
const?
Quoted 24 lines
drivers/power/reset/qnap-poweroff.c +4
-5static void qnap_power_off (void ) { -/* 19200 baud divisor */ -const unsigned divisor = ((tclk + (8 *19200 )) / (16 *19200 )); +const unsigned divisor = ((tclk + (8 * cfg->baud)) / (16 * cfg->baud));pr_err ("%s: triggering power-off...\n" , __func__); -/* hijack UART1 and reset into sane state (19200,8n1) */ +/* hijack UART1 and reset into sane state */ writel (0x83 ,UART1_REG (LCR ));writel (divisor &0xff ,UART1_REG (DLL ));writel ((divisor >>8 ) &0xff ,UART1_REG (DLM ));@@ -44,16 +69,21 @@ static void qnap_power_off(void)writel (0x00 ,UART1_REG (FCR ));writel (0x00 ,UART1_REG (MCR )); -/* send the power-off command 'A' to PIC */ -writel ('A' ,UART1_REG (TX )); +/* send the power-off command to PIC */ +writel (cfg->cmd,UART1_REG (TX )); }
drivers/power/reset/qnap-poweroff.c static void qnap_power_off(void) · line 85
Quoted 10 lines
drivers/power/reset/qnap-poweroff.c +4
-0static int qnap_power_off_probe (struct platform_device *pdev) { +struct device_node *np = pdev->dev.of_node;struct resource *res;struct clk *clk;char symname[KSYM_NAME_LEN ]; +const struct of_device_id *match = +of_match_node (qnap_power_off_of_match_table, np); + cfg = (struct power_off_cfg *)match->data;
This cast is not necessary.
drivers/power/reset/qnap-poweroff.c static int qnap_power_off_remove(struct platform_device *pdev) · line 127
Quoted 13 lines
drivers/power/reset/qnap-poweroff.c +0
-4res =platform_get_resource (pdev,IORESOURCE_MEM ,0 );if (!res) {dev_err (&pdev->dev,"Missing resource" );@@ -94,10 +124,6 @@ static int qnap_power_off_remove(struct platform_device *pdev)return 0 ; } -static const struct of_device_id qnap_power_off_of_match_table[] = { - { .compatible ="qnap,power-off" , }, - {} -};MODULE_DEVICE_TABLE (of, qnap_power_off_of_match_table);
You should probably move this up above with the table.
Josh
Signature · 2 lines
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
PATCH v4 2/4 DT: Vendor prefixes: Add ricoh, ssi and synology
In reply to klightspeed at killerwolves.netFrom: Andrew Lunn <[email protected]>
The following patches make use of vendor names ricoh, ssi and synology. Add them to the vendor prefix list.
---
v2:
Use stock ticker for Ricoh as vendor name
s/Richoh/Ricoh/
--- Documentation/devicetree/bindings/vendor-prefixes.txt | 3 +++ 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.txt +3 -0
@@ -72,6 +72,7 @@ ralink Mediatek/Ralink Technology Corp. ramtron Ramtron International realtek Realtek Semiconductor Corp. renesas Renesas Electronics Corporation +ricoy Ricoh Co. Ltd. rockchip Fuzhou Rockchip Electronics Co., Ltd samsung Samsung Semiconductor sbs Smart Battery System
@@ -79,11 +80,13 @@ schindler Schindler sil Silicon Image silabs Silicon Laboratories simtek +sii Seiko Instruments, Inc. sirf SiRF Technology, Inc. snps Synopsys, Inc. st STMicroelectronics ste ST-Ericsson stericsson ST-Ericsson +synology Synology, Inc. ti Texas Instruments tlm Trusted Logic Mobility toshiba Toshiba Corporation
Signature · 1 line
1.8.3.2
PATCH v4 2/4 DT: Vendor prefixes: Add ricoh, ssi and synology
Quoted 28 lines · klightspeed at killerwolves.net
From: Andrew Lunn <[email protected]>
The following patches make use of vendor names ricoh, ssi and synology. Add them to the vendor prefix list.
Signed-off-by Andrew Lunn <[email protected]>Acked-by Jason Cooper <[email protected]>---
v2:
Use stock ticker for Ricoh as vendor name
s/Richoh/Ricoh/--- Documentation/devicetree/bindings/vendor-prefixes.txt | 3 +++ 1 file changed, 3 insertions(+)Documentation/devicetree/bindings/vendor-prefixes.txt +1
-0@@ -72,6 +72,7 @@ ralink Mediatek/Ralink Technology Corp. ramtron Ramtron International realtek Realtek Semiconductor Corp. renesas Renesas Electronics Corporation +ricoy Ricoh Co. Ltd. rockchip Fuzhou Rockchip Electronics Co., Ltd samsung Samsung Semiconductor sbs Smart Battery System
Documentation/devicetree/bindings/vendor-prefixes.txt schindler Schindler · line 89
Quoted 10 lines
Documentation/devicetree/bindings/vendor-prefixes.txt +2
-0@@ -79,11 +80,13 @@ schindler Schindler sil Silicon Image silabs Silicon Laboratories simtek +sii Seiko Instruments, Inc. sirf SiRF Technology, Inc. snps Synopsys, Inc. st STMicroelectronics ste ST-Ericsson stericsson ST-Ericsson +synology Synology, Inc.
Oh, great! Looks like this one is added (see my comment on patch 1). I'm wondering if 'qnap' should be added as well.
Signature · 2 lines
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
PATCH v4 2/4 DT: Vendor prefixes: Add ricoh, ssi and synology
Quoted 34 lines · Josh Cartwright
Quoted 33 lines · klightspeed at killerwolves.net
From: Andrew Lunn <[email protected]>
The following patches make use of vendor names ricoh, ssi and synology. Add them to the vendor prefix list.
Signed-off-by Andrew Lunn <[email protected]>Acked-by Jason Cooper <[email protected]>---
v2:
Use stock ticker for Ricoh as vendor name
s/Richoh/Ricoh/--- Documentation/devicetree/bindings/vendor-prefixes.txt | 3 +++ 1 file changed, 3 insertions(+)Documentation/devicetree/bindings/vendor-prefixes.txt +2
-0@@ -72,6 +72,7 @@ ralink Mediatek/Ralink Technology Corp. ramtron Ramtron International realtek Realtek Semiconductor Corp. renesas Renesas Electronics Corporation +ricoy Ricoh Co. Ltd. rockchip Fuzhou Rockchip Electronics Co., Ltd samsung Samsung Semiconductor sbs Smart Battery System@@ -79,11 +80,13 @@ schindler Schindler sil Silicon Image silabs Silicon Laboratories simtek +sii Seiko Instruments, Inc. sirf SiRF Technology, Inc.
Quoted 8 lines
Documentation/devicetree/bindings/vendor-prefixes.txt schindler Schindler · line 89
Quoted 5 lines
Documentation/devicetree/bindings/vendor-prefixes.txt +1
-0snps Synopsys, Inc. st STMicroelectronics ste ST-Ericsson stericsson ST-Ericsson +synology Synology, Inc.Oh, great! Looks like this one is added (see my comment on patch 1). I'm wondering if 'qnap' should be added as well.
Do we want to use "qnap" or their ticker "qnapsz"?
PATCH v4 2/4 DT: Vendor prefixes: Add ricoh, ssi and synology
Quoted 44 lines · Ben Peddell
Quoted 34 lines · Josh Cartwright
Quoted 33 lines · klightspeed at killerwolves.net
From: Andrew Lunn <[email protected]>
The following patches make use of vendor names ricoh, ssi and synology. Add them to the vendor prefix list.
Signed-off-by Andrew Lunn <[email protected]>Acked-by Jason Cooper <[email protected]>---
v2:
Use stock ticker for Ricoh as vendor name
s/Richoh/Ricoh/--- Documentation/devicetree/bindings/vendor-prefixes.txt | 3 +++ 1 file changed, 3 insertions(+)Documentation/devicetree/bindings/vendor-prefixes.txt +2
-0@@ -72,6 +72,7 @@ ralink Mediatek/Ralink Technology Corp. ramtron Ramtron International realtek Realtek Semiconductor Corp. renesas Renesas Electronics Corporation +ricoy Ricoh Co. Ltd. rockchip Fuzhou Rockchip Electronics Co., Ltd samsung Samsung Semiconductor sbs Smart Battery System@@ -79,11 +80,13 @@ schindler Schindler sil Silicon Image silabs Silicon Laboratories simtek +sii Seiko Instruments, Inc. sirf SiRF Technology, Inc.Quoted 8 lines
Documentation/devicetree/bindings/vendor-prefixes.txt schindler Schindler · line 89
Quoted 5 lines
Documentation/devicetree/bindings/vendor-prefixes.txt +1
-0snps Synopsys, Inc. st STMicroelectronics ste ST-Ericsson stericsson ST-Ericsson +synology Synology, Inc.Oh, great! Looks like this one is added (see my comment on patch 1). I'm wondering if 'qnap' should be added as well.
Quoted 2 lines
Do we want to use "qnap" or their ticker "qnapsz"?
Hi Ben
Ticker.
It might also make sense to re-arrange the order of these patches, so that this one comes first and then the power off patch. However it is not too important, because the patches are probably going to get split up and go thought different maintainers.
Andrew
PATCH v4 2/4 DT: Vendor prefixes: Add ricoh, ssi and synology
In reply to klightspeed at killerwolves.netQuoted 4 lines · klightspeed at killerwolves.net
From: Andrew Lunn <[email protected]>
The following patches make use of vendor names ricoh, ssi and synology. Add them to the vendor prefix list.
You have a typo in the patch description + subject: ssi vs sii.
-- Sebastian
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140217/9c134a27/attachment-0001.sig>
PATCH v4 3/4 DT: i2c: Trivial: Add sii, s35390a, fix ricoh vendor prefix
In reply to klightspeed at killerwolves.netFrom: Andrew Lunn <[email protected]>
Add the Seiko Instruments Inc S35390a to the list of trivial i2c devices. At the same time, correct the vendor prefix for ricoh, which should be the ticker symbol ricoy.
--- Documentation/devicetree/bindings/i2c/trivial-devices.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/i2c/trivial-devices.txt +2 -1
@@ -56,8 +56,9 @@ ovti,ov5642 OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI an pericom,pt7c4338 Real-time Clock Module plx,pex8648 48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch ramtron,24c64 i2c serial eeprom (24cxx) -ricoh,rs5c372a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC +ricoy,rs5c372a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC samsung,24ad0xd1 S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power) +sii,s35390a 2-wire CMOS real-time clock st-micro,24c256 i2c serial eeprom (24cxx) stm,m41t00 Serial Access TIMEKEEPER stm,m41t62 Serial real-time clock (RTC) with alarm
Signature · 1 line
1.8.3.2
PATCH v4 4/4 ARM: Kirkwood: Add support for many Synology NAS devices
In reply to klightspeed at killerwolves.netFrom: "[email protected]" <[email protected]>
Add device tree fragments and files to support many of the kirkwood based Synology NAS devices. This is a modification of Andrew Lunn's <[email protected]> translation of the board setup file maintained by Ben Peddell <[email protected]>
The Ricoh RS5C372 RTC was used in all 2009 units and some 2010 units. All other Synology Kirkwood-based DiskStations and RackStations use the Seiko S35390A RTC.
Most of the 1-bay and 2-bay units use the GPIOs that are multiplexed with the built-in SATA interface activity/presence pins on mpp 20-23, while the 4-bay units use ge01 and a PCIe SATA controller, and put the software controlled HDD leds on mpp 36-43.
Most of the 6281 units with HDD power controls use mpp 29 and 31, while most of the 6282 units with HDD power controls use mpp 30, 34, 44 and 45 and provide a model ID on mpp 28, 29, 46 and 47. Pre-2012 units and most 4-bay units didn't have a separate power control for HDD1. These power controls are presumably to limit startup current from the 12V brick power supply.
Instead of using separate dtsi files in a synology directory, this patch uses a single dtsi file containing all of the modules for these boards, with all of the modules not common to all boards disabled. The board dts files then enable the appropriate modules for their boards.
---
v2:
Fix gpio's which should be gpo.
Rebase onto v3-14-rc1
Update RTC nodes with vendor name.
Update SPI flash node with vendor name.
Add a description of the lego
Use ricoy, i.e. the stock ticker
v3:
Merge Synology dtsi files into single dtsi file
v4:
Various minor fixes to synology dtsi file
--- arch/arm/boot/dts/Makefile | 15 + arch/arm/boot/dts/kirkwood-ds109.dts | 41 ++ arch/arm/boot/dts/kirkwood-ds110jv10.dts | 41 ++ arch/arm/boot/dts/kirkwood-ds111.dts | 44 ++ arch/arm/boot/dts/kirkwood-ds112.dts | 48 ++ arch/arm/boot/dts/kirkwood-ds209.dts | 44 ++ arch/arm/boot/dts/kirkwood-ds210.dts | 46 ++ arch/arm/boot/dts/kirkwood-ds212.dts | 47 ++ arch/arm/boot/dts/kirkwood-ds212j.dts | 41 ++ arch/arm/boot/dts/kirkwood-ds409.dts | 48 ++ arch/arm/boot/dts/kirkwood-ds409slim.dts | 40 ++ arch/arm/boot/dts/kirkwood-ds411.dts | 52 ++ arch/arm/boot/dts/kirkwood-ds411j.dts | 48 ++ arch/arm/boot/dts/kirkwood-ds411slim.dts | 48 ++ arch/arm/boot/dts/kirkwood-rs212.dts | 48 ++ arch/arm/boot/dts/kirkwood-rs409.dts | 44 ++ arch/arm/boot/dts/kirkwood-rs411.dts | 44 ++ arch/arm/boot/dts/kirkwood-synology.dtsi | 871 +++++++++++++++++++++++++++++++ 18 files changed, 1610 insertions(+) create mode 100644 arch/arm/boot/dts/kirkwood-ds109.dts create mode 100644 arch/arm/boot/dts/kirkwood-ds110jv10.dts create mode 100644 arch/arm/boot/dts/kirkwood-ds111.dts create mode 100644 arch/arm/boot/dts/kirkwood-ds112.dts create mode 100644 arch/arm/boot/dts/kirkwood-ds209.dts create mode 100644 arch/arm/boot/dts/kirkwood-ds210.dts create mode 100644 arch/arm/boot/dts/kirkwood-ds212.dts create mode 100644 arch/arm/boot/dts/kirkwood-ds212j.dts create mode 100644 arch/arm/boot/dts/kirkwood-ds409.dts create mode 100644 arch/arm/boot/dts/kirkwood-ds409slim.dts create mode 100644 arch/arm/boot/dts/kirkwood-ds411.dts create mode 100644 arch/arm/boot/dts/kirkwood-ds411j.dts create mode 100644 arch/arm/boot/dts/kirkwood-ds411slim.dts create mode 100644 arch/arm/boot/dts/kirkwood-rs212.dts create mode 100644 arch/arm/boot/dts/kirkwood-rs409.dts create mode 100644 arch/arm/boot/dts/kirkwood-rs411.dts create mode 100644 arch/arm/boot/dts/kirkwood-synology.dtsi
arch/arm/boot/dts/Makefile +15 -0
@@ -90,6 +90,18 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ kirkwood-dns325.dtb \ kirkwood-dockstar.dtb \ kirkwood-dreamplug.dtb \ + kirkwood-ds109.dtb \ + kirkwood-ds110jv10.dtb \ + kirkwood-ds111.dtb \ + kirkwood-ds209.dtb \ + kirkwood-ds210.dtb \ + kirkwood-ds212.dtb \ + kirkwood-ds212j.dtb \ + kirkwood-ds409.dtb \ + kirkwood-ds409slim.dtb \ + kirkwood-ds411.dtb \ + kirkwood-ds411j.dtb \ + kirkwood-ds411slim.dtb \ kirkwood-goflexnet.dtb \ kirkwood-guruplug-server-plus.dtb \ kirkwood-ib62x0.dtb \
@@ -112,6 +124,9 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ kirkwood-nsa310a.dtb \ kirkwood-openblocks_a6.dtb \ kirkwood-openblocks_a7.dtb \ + kirkwood-rs212.dtb \ + kirkwood-rs409.dtb \ + kirkwood-rs411.dtb \ kirkwood-sheevaplug.dtb \ kirkwood-sheevaplug-esata.dtb \ kirkwood-topkick.dtb \
arch/arm/boot/dts/kirkwood-ds109.dts new file +41 -0
41 lines not on this page · raw message
arch/arm/boot/dts/kirkwood-ds110jv10.dts new file +41 -0
41 lines not on this page · raw message
arch/arm/boot/dts/kirkwood-ds111.dts new file +44 -0
44 lines not on this page · raw message
arch/arm/boot/dts/kirkwood-ds112.dts new file +48 -0
48 lines not on this page · raw message
arch/arm/boot/dts/kirkwood-ds209.dts new file +44 -0
44 lines not on this page · raw message
arch/arm/boot/dts/kirkwood-ds210.dts new file +46 -0
46 lines not on this page · raw message
arch/arm/boot/dts/kirkwood-ds212.dts new file +47 -0
47 lines not on this page · raw message
arch/arm/boot/dts/kirkwood-ds212j.dts new file +41 -0
41 lines not on this page · raw message
arch/arm/boot/dts/kirkwood-ds409.dts new file +48 -0
48 lines not on this page · raw message
arch/arm/boot/dts/kirkwood-ds409slim.dts new file +40 -0
@@ -0,0 +1,40 @@ +/* + * Andrew Lunn <[email protected]> + * Ben Peddell <[email protected]> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" +#include "kirkwood-synology.dtsi" + +/ { + model = "Synology 409slim"; + compatible = "synology,ds409slim", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + gpio-fan-150-32-35 { + status = "okay"; + }; + + gpio-leds-hdd-20 { + status = "okay"; + }; +}; + +&rs5c372 { + status = "okay"; +};
arch/arm/boot/dts/kirkwood-ds411.dts new file +52 -0
52 lines not on this page · raw message
arch/arm/boot/dts/kirkwood-ds411j.dts new file +48 -0
48 lines not on this page · raw message
arch/arm/boot/dts/kirkwood-ds411slim.dts new file +48 -0
48 lines not on this page · raw message
arch/arm/boot/dts/kirkwood-rs212.dts new file +48 -0
48 lines not on this page · raw message
arch/arm/boot/dts/kirkwood-rs409.dts new file +44 -0
44 lines not on this page · raw message
arch/arm/boot/dts/kirkwood-rs411.dts new file +44 -0
44 lines not on this page · raw message
arch/arm/boot/dts/kirkwood-synology.dtsi new file +871 -0
871 lines not on this page · raw message
Signature · 1 line
1.8.3.2